Scribd
Upload
5 views4 pages

4214 e 2

The document defines four capacitive sensors and reads sensor values in a loop, playing tones based on the sensor values.

Uploaded by

Dookers
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
5 views4 pages

4214 e 2

The document defines four capacitive sensors and reads sensor values in a loop, playing tones based on the sensor values.

Uploaded by

Dookers
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 4

CapacitiveSensor capSensor_4_8 = CapacitiveSensor(4,8);

CapacitiveSensor capSensor_4_10 = CapacitiveSensor(4,10);


CapacitiveSensor capSensor_4_12 = CapacitiveSensor(4,12);
CapacitiveSensor capSensor_4_13 = CapacitiveSensor(4,13);

void setup() {
Serial.begin(9600);

void loop() {
long value1=capSensor_4_8.capacitiveSensor(30);
long value2=capSensor_4_10.capacitiveSensor(30);
long value3=capSensor_4_12.capacitiveSensor(30);
long value4=capSensor_4_13.capacitiveSensor(30);

if (value1>200) tone (2, 262);


if (value2>200) tone (2, 294);
if (value3>200) tone (2, 330);
if (value4>200) tone (2, 349);
if (value1<200 && value2<200 && value3<200 && value4<200) noTone (2);

Serial.println (value1);

delay(50);

}
#include <CapacitiveSensor.h>

CapacitiveSensor capSensor_4_8 = CapacitiveSensor(4,8);


CapacitiveSensor capSensor_4_10 = CapacitiveSensor(4,10);
CapacitiveSensor capSensor_4_12 = CapacitiveSensor(4,12);
CapacitiveSensor capSensor_4_13 = CapacitiveSensor(4,13);

void setup() {
Serial.begin(9600);

void loop() {
long value1=capSensor_4_8.capacitiveSensor(30);
long value2=capSensor_4_10.capacitiveSensor(30);
long value3=capSensor_4_12.capacitiveSensor(30);
long value4=capSensor_4_13.capacitiveSensor(30);

if (value1>200) tone (2, 262);


if (value2>200) tone (2, 294);
if (value3>200) tone (2, 330);
if (value4>200) tone (2, 349);
if (value1<200 && value2<200 && value3<200 && value4<200) noTone (2);

Serial.println (value1);

delay(50);

}
#include <CapacitiveSensor.h>

CapacitiveSensor capSensor_4_8 = CapacitiveSensor(4,8);


CapacitiveSensor capSensor_4_10 = CapacitiveSensor(4,10);
CapacitiveSensor capSensor_4_12 = CapacitiveSensor(4,12);
CapacitiveSensor capSensor_4_13 = CapacitiveSensor(4,13);

void setup() {
Serial.begin(9600);

void loop() {
long value1=capSensor_4_8.capacitiveSensor(30);
long value2=capSensor_4_10.capacitiveSensor(30);
long value3=capSensor_4_12.capacitiveSensor(30);
long value4=capSensor_4_13.capacitiveSensor(30);

if (value1>200) tone (2, 262);


if (value2>200) tone (2, 294);
if (value3>200) tone (2, 330);
if (value4>200) tone (2, 349);
if (value1<200 && value2<200 && value3<200 && value4<200) noTone (2);

Serial.println (value1);

delay(50);

}
#include <CapacitiveSensor.h>

CapacitiveSensor capSensor_4_8 = CapacitiveSensor(4,8);


CapacitiveSensor capSensor_4_10 = CapacitiveSensor(4,10);
CapacitiveSensor capSensor_4_12 = CapacitiveSensor(4,12);
CapacitiveSensor capSensor_4_13 = CapacitiveSensor(4,13);

void setup() {
Serial.begin(9600);

void loop() {
long value1=capSensor_4_8.capacitiveSensor(30);
long value2=capSensor_4_10.capacitiveSensor(30);
long value3=capSensor_4_12.capacitiveSensor(30);
long value4=capSensor_4_13.capacitiveSensor(30);

if (value1>200) tone (2, 262);


if (value2>200) tone (2, 294);
if (value3>200) tone (2, 330);
if (value4>200) tone (2, 349);
if (value1<200 && value2<200 && value3<200 && value4<200) noTone (2);

Serial.println (value1);

delay(50);

}
#include <CapacitiveSensor.h>

CapacitiveSensor capSensor_4_8 = CapacitiveSensor(4,8);


CapacitiveSensor capSensor_4_10 = CapacitiveSensor(4,10);
CapacitiveSensor capSensor_4_12 = CapacitiveSensor(4,12);
CapacitiveSensor capSensor_4_13 = CapacitiveSensor(4,13);

void setup() {
Serial.begin(9600);

void loop() {
long value1=capSensor_4_8.capacitiveSensor(30);
long value2=capSensor_4_10.capacitiveSensor(30);
long value3=capSensor_4_12.capacitiveSensor(30);
long value4=capSensor_4_13.capacitiveSensor(30);

if (value1>200) tone (2, 262);


if (value2>200) tone (2, 294);
if (value3>200) tone (2, 330);
if (value4>200) tone (2, 349);
if (value1<200 && value2<200 && value3<200 && value4<200) noTone (2);

Serial.println (value1);

delay(50);

}
#include <CapacitiveSensor.h>

CapacitiveSensor capSensor_4_8 = CapacitiveSensor(4,8);


CapacitiveSensor capSensor_4_10 = CapacitiveSensor(4,10);
CapacitiveSensor capSensor_4_12 = CapacitiveSensor(4,12);
CapacitiveSensor capSensor_4_13 = CapacitiveSensor(4,13);

void setup() {
Serial.begin(9600);

void loop() {
long value1=capSensor_4_8.capacitiveSensor(30);
long value2=capSensor_4_10.capacitiveSensor(30);
long value3=capSensor_4_12.capacitiveSensor(30);
long value4=capSensor_4_13.capacitiveSensor(30);

if (value1>200) tone (2, 262);


if (value2>200) tone (2, 294);
if (value3>200) tone (2, 330);
if (value4>200) tone (2, 349);
if (value1<200 && value2<200 && value3<200 && value4<200) noTone (2);

Serial.println (value1);

delay(50);

}
#include <CapacitiveSensor.h>

CapacitiveSensor capSensor_4_8 = CapacitiveSensor(4,8);


CapacitiveSensor capSensor_4_10 = CapacitiveSensor(4,10);
CapacitiveSensor capSensor_4_12 = CapacitiveSensor(4,12);
CapacitiveSensor capSensor_4_13 = CapacitiveSensor(4,13);

void setup() {
Serial.begin(9600);

void loop() {
long value1=capSensor_4_8.capacitiveSensor(30);
long value2=capSensor_4_10.capacitiveSensor(30);
long value3=capSensor_4_12.capacitiveSensor(30);
long value4=capSensor_4_13.capacitiveSensor(30);

if (value1>200) tone (2, 262);


if (value2>200) tone (2, 294);
if (value3>200) tone (2, 330);
if (value4>200) tone (2, 349);
if (value1<200 && value2<200 && value3<200 && value4<200) noTone (2);

Serial.println (value1);

delay(50);

}
nobihi — Today at 1:09 PM
why u no wan buy vp
Exotic Cat — Today at 1:09 PM
wooooo

wwww
#include <CapacitiveSensor.h>

CapacitiveSensor capSensor_4_8 = CapacitiveSensor(4,8);


CapacitiveSensor capSensor_4_10 = CapacitiveSensor(4,10);
CapacitiveSensor capSensor_4_12 = CapacitiveSensor(4,12);
CapacitiveSensor capSensor_4_13 = CapacitiveSensor(4,13);

void setup() {
Serial.begin(9600);

void loop() {
long value1=capSensor_4_8.capacitiveSensor(30);
long value2=capSensor_4_10.capacitiveSensor(30);
long value3=capSensor_4_12.capacitiveSensor(30);
long value4=capSensor_4_13.capacitiveSensor(30);

if (value1>200) tone (2, 262);


if (value2>200) tone (2, 294);
if (value3>200) tone (2, 330);
if (value4>200) tone (2, 349);
if (value1<200 && value2<200 && value3<200 && value4<200) noTone (2);

Serial.println (value1);

delay(50);

You might also like