Scribd
Upload
54 views3 pages

Push Button Led Sequence Code

The document defines constants and variables for controlling 6 LEDs. It initializes the LED pins and a button pin in setup. The main loop toggles between LED patterns when the button is pressed, cycling through individually lighting each LED, then all on, various combinations, and all off.

Uploaded by

vpavonem
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
54 views3 pages

Push Button Led Sequence Code

The document defines constants and variables for controlling 6 LEDs. It initializes the LED pins and a button pin in setup. The main loop toggles between LED patterns when the button is pressed, cycling through individually lighting each LED, then all on, various combinations, and all off.

Uploaded by

vpavonem
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 3

const byte LED1[]={8,9,10,11,12,13};

const int P1=2;


const int debaunceDelay=100;
byte stato=1;

void setup() {
pinMode(LED1[0], OUTPUT);
pinMode(LED1[1], OUTPUT);
pinMode(LED1[2], OUTPUT);
pinMode(LED1[3], OUTPUT);
pinMode(LED1[4], OUTPUT);
pinMode(LED1[5], OUTPUT);
pinMode(P1, INPUT);
}

void loop() {
if(digitalRead(P1))
{
if(stato<7) stato=stato+1;
else stato=1;
}
switch(stato)
{ case 1:
digitalWrite(LED1[0],HIGH);
delay(100);
digitalWrite(LED1[0],LOW);
delay(100);
digitalWrite(LED1[0],HIGH);
delay(100);
digitalWrite(LED1[0],LOW);
delay(100);
digitalWrite(LED1[1],HIGH);
delay(100);
digitalWrite(LED1[1],LOW);
delay(100);
digitalWrite(LED1[1],HIGH);
delay(100);
digitalWrite(LED1[1],LOW);
delay(100);
digitalWrite(LED1[2],HIGH);
delay(100);
digitalWrite(LED1[2],LOW);
delay(100);
digitalWrite(LED1[2],HIGH);
delay(100);
digitalWrite(LED1[3],LOW);
delay(100);
digitalWrite(LED1[3],HIGH);
delay(100);
digitalWrite(LED1[3],LOW);
delay(100);
digitalWrite(LED1[4],HIGH);
delay(100);
digitalWrite(LED1[4],LOW);
delay(100);
digitalWrite(LED1[5],HIGH);
delay(100);
digitalWrite(LED1[5],LOW);
delay(100);
digitalWrite(LED1[5],HIGH);
delay(100);
digitalWrite(LED1[5],LOW);
delay(100);
digitalWrite(LED1[5],HIGH);
delay(100);
digitalWrite(LED1[5],LOW);
delay(100);
digitalWrite(LED1[4],HIGH);
delay(100);
digitalWrite(LED1[4],LOW);
delay(100);
digitalWrite(LED1[4],HIGH);
delay(100);
digitalWrite(LED1[4],LOW);
delay(100);
digitalWrite(LED1[3],HIGH);
delay(100);
digitalWrite(LED1[3],LOW);
delay(100);
digitalWrite(LED1[3],HIGH);
delay(100);
digitalWrite(LED1[2],LOW);
delay(100);
digitalWrite(LED1[2],HIGH);
delay(100);
digitalWrite(LED1[2],LOW);
delay(100);
digitalWrite(LED1[1],HIGH);
delay(100);
digitalWrite(LED1[1],LOW);
delay(100);
digitalWrite(LED1[0],HIGH);
delay(100);
digitalWrite(LED1[0],LOW);
delay(100);
break;
case 2:
digitalWrite(LED1[0],HIGH);
digitalWrite(LED1[1],HIGH);
digitalWrite(LED1[2],HIGH);
digitalWrite(LED1[3],HIGH);
digitalWrite(LED1[4],HIGH);
digitalWrite(LED1[5],HIGH);
break;
case 3:
digitalWrite(LED1[0],HIGH);
digitalWrite(LED1[1],LOW);
digitalWrite(LED1[2],LOW);
digitalWrite(LED1[3],LOW);
digitalWrite(LED1[4],LOW);
digitalWrite(LED1[5],LOW);
break;
case 4:
digitalWrite(LED1[0],LOW);
digitalWrite(LED1[1],HIGH);
digitalWrite(LED1[2],LOW);
digitalWrite(LED1[3],LOW);
digitalWrite(LED1[4],LOW);
digitalWrite(LED1[5],LOW);
break;
case 5:
digitalWrite(LED1[0],LOW);
digitalWrite(LED1[1],LOW);
digitalWrite(LED1[2],HIGH);
digitalWrite(LED1[3],LOW);
digitalWrite(LED1[4],LOW);
digitalWrite(LED1[5],LOW);
break;
case 6:
digitalWrite(LED1[0],LOW);
digitalWrite(LED1[1],LOW);
digitalWrite(LED1[2],LOW);
digitalWrite(LED1[3],HIGH);
digitalWrite(LED1[4],LOW);
digitalWrite(LED1[5],LOW);
break;
case 7:
digitalWrite(LED1[0],LOW);
digitalWrite(LED1[1],LOW);
digitalWrite(LED1[2],LOW);
digitalWrite(LED1[3],LOW);
digitalWrite(LED1[4],HIGH);
digitalWrite(LED1[5],LOW);
break;
case 8:
digitalWrite(LED1[0],LOW);
digitalWrite(LED1[1],LOW);
digitalWrite(LED1[2],LOW);
digitalWrite(LED1[3],LOW);
digitalWrite(LED1[4],LOW);
digitalWrite(LED1[5],HIGH);
break;
}
while (digitalRead(P1) == LOW)
{
delay(10);
}
delay(debaunceDelay);
}

You might also like