Chapter 3

Transport Layer
A note on the use of these PowerPoint slides:
We’re making these slides freely available to all (faculty, students,
readers). They’re in PowerPoint form so you see the animations; and
can add, modify, and delete slides (including this one) and slide content
to suit your needs. They obviously represent a lot of work on our part.
In return for use, we only ask the following:
 If you use these slides (e.g., in a class) that you mention their
source (after all, we’d like people to use our book!)
 If you post any slides on a www site, that you note that they are
adapted from (or perhaps identical to) our slides, and note our
copyright of this material.
Computer Networking: A
For a revision history, see the slide note for this page.
Top-Down Approach
Thanks and enjoy! JFK/KWR 8th edition
All material copyright 1996-2020
Jim Kurose, Keith Ross
J.F Kurose and K.W. Ross, All Rights Reserved Pearson, 2020
Transport Layer: 3-1
Transport layer: overview
Our goal:
 understand principles  learn about Internet transport
behind transport layer layer protocols:
services: • UDP: connectionless transport
• multiplexing, • TCP: connection-oriented reliable
demultiplexing transport
• reliable data transfer • TCP congestion control
• flow control
• congestion control

Transport Layer: 3-2

Transport layer: roadmap
 Transport-layer services
 Multiplexing and demultiplexing
 Connectionless transport: UDP
 Principles of reliable data transfer
 Connection-oriented transport: TCP
 Principles of congestion control
 TCP congestion control
 Evolution of transport-layer
functionality
Transport Layer: 3-3
Transport services and protocols
application
transport

 provide logical communication mobile network

network
data link
physical
between application processes national or global ISP

running on different hosts

 transport protocols actions in end
systems: local or
• sender: breaks application messages regional ISP

into segments, passes to network layer home network content

• receiver: reassembles segments into provider
network datacenter
messages, passes to application layer application
transport
network
network

 two transport protocols available to data link

physical

Internet applications enterprise

network
• TCP, UDP
Transport Layer: 3-4
Chapter 3: roadmap
 Transport-layer services
 Multiplexing and demultiplexing
 Connectionless transport: UDP
 Principles of reliable data transfer
 Connection-oriented transport: TCP
 Principles of congestion control
 TCP congestion control
 Evolution of transport-layer
functionality
Transport Layer: 3-5
 Principles of reliable data transfer

sending receiving
process process
application data data
transport
reliable channel

reliable service abstraction

Transport Layer: 3-6

 Principles of reliable data transfer

sending receiving sending receiving

process process process process
application data data application data data
transport transport
reliable channel
sender-side of receiver-side
reliable service abstraction reliable data of reliable data
transfer protocol transfer protocol

transport
network
unreliable channel

reliable service implementation

Transport Layer: 3-7

Principles of reliable data transfer

sending receiving
process process
application data data
transport

sender-side of receiver-side
Complexity of reliable data reliable data
transfer protocol
of reliable data
transfer protocol
transfer protocol will depend
(strongly) on characteristics of transport
network
unreliable channel (lose, unreliable channel
corrupt, reorder data?)
reliable service implementation

Transport Layer: 3-8

Principles of reliable data transfer

sending receiving
process process
application data data
transport

sender-side of receiver-side
reliable data of reliable data
Sender, receiver do not know transfer protocol transfer protocol
the “state” of each other, e.g.,
was a message received? transport
network
 unless communicated via a unreliable channel
message
reliable service implementation

Transport Layer: 3-9

 Reliable data transfer protocol (rdt): interfaces
rdt_send(): called from above, deliver_data(): called by rdt
(e.g., by app.). Passed data to to deliver data to upper layer
deliver to receiver upper layer
sending receiving
process process
rdt_send() data data
deliver_data()

sender-side data receiver-side

implementation of implementation of
rdt reliable data packet rdt reliable data
transfer protocol transfer protocol
udt_send() Header data Header data rdt_rcv()

unreliable channel
udt_send(): called by rdt rdt_rcv(): called when packet
to transfer packet over Bi-directional communication over arrives on receiver side of
unreliable channel to receiver unreliable channel channel
Transport Layer: 3-10
Reliable data transfer: getting started
We will:
 incrementally develop sender, receiver sides of reliable data transfer
protocol (rdt)
 consider only unidirectional data transfer
• but control info will flow in both directions!
 use finite state machines (FSM) to specify sender, receiver
event causing state transition
actions taken on state transition
state: when in this “state”
next state uniquely state state
determined by next 1 event
event 2
actions

Transport Layer: 3-11

rdt1.0: reliable transfer over a reliable channel
 underlying channel perfectly reliable
• no bit errors
• no loss of packets

 separate FSMs for sender, receiver:

• sender sends data into underlying channel
• receiver reads data from underlying channel

Wait for rdt_send(data) Wait for rdt_rcv(packet)

sender call from packet = make_pkt(data) receiver call from extract (packet,data)
above udt_send(packet) below deliver_data(data)

Transport Layer: 3-12

rdt2.0: channel with bit errors
 underlying channel may flip bits in packet
• checksum (e.g., Internet checksum) to detect bit errors
 the question: how to recover from errors?

How do humans recover from “errors” during conversation?

Transport Layer: 3-13

rdt2.0: channel with bit errors
 underlying channel may flip bits in packet
• checksum to detect bit errors
 the question: how to recover from errors?
• acknowledgements (ACKs): receiver explicitly tells sender that pkt
received OK
• negative acknowledgements (NAKs): receiver explicitly tells sender
that pkt had errors
• sender retransmits pkt on receipt of NAK

stop and wait

sender sends one packet, then waits for receiver response
Transport Layer: 3-14
rdt2.0: FSM specifications
rdt_send(data)
snkpkt = make_pkt(data, checksum)
udt_send(sndpkt)
rdt_rcv(rcvpkt) &&
Wait for Wait for isNAK(rcvpkt)
sender call from ACK or udt_send(sndpkt) rdt_rcv(rcvpkt) && corrupt(rcvpkt)
above NAK
udt_send(NAK)

rdt_rcv(rcvpkt) && isACK(rcvpkt)

Wait for
L call from receiver
below

rdt_rcv(rcvpkt) && notcorrupt(rcvpkt)

extract(rcvpkt,data)
deliver_data(data)
udt_send(ACK)

Transport Layer: 3-15

rdt2.0: FSM specification
rdt_send(data)
snkpkt = make_pkt(data, checksum)
udt_send(sndpkt)
rdt_rcv(rcvpkt) &&
Wait for Wait for isNAK(rcvpkt)
sender call from ACK or udt_send(sndpkt) rdt_rcv(rcvpkt) && corrupt(rcvpkt)
above NAK
udt_send(NAK)

rdt_rcv(rcvpkt) && isACK(rcvpkt)

Wait for
L call from receiver
below

Note: “state” of receiver (did the receiver get my

message correctly?) isn’t known to sender unless rdt_rcv(rcvpkt) && notcorrupt(rcvpkt)
extract(rcvpkt,data)
somehow communicated from receiver to sender deliver_data(data)
 that’s why we need a protocol! udt_send(ACK)

Transport Layer: 3-16

rdt2.0: operation with no errors
rdt_send(data)
snkpkt = make_pkt(data, checksum)
udt_send(sndpkt)
rdt_rcv(rcvpkt) &&
Wait for Wait for isNAK(rcvpkt)
sender call from ACK or udt_send(sndpkt) rdt_rcv(rcvpkt) && corrupt(rcvpkt)
above NAK
udt_send(NAK)

rdt_rcv(rcvpkt) && isACK(rcvpkt)

Wait for
L call from receiver
below

rdt_rcv(rcvpkt) && notcorrupt(rcvpkt)

extract(rcvpkt,data)
deliver_data(data)
udt_send(ACK)

Transport Layer: 3-17

rdt2.0: corrupted packet scenario
rdt_send(data)
snkpkt = make_pkt(data, checksum)
udt_send(sndpkt)
rdt_rcv(rcvpkt) &&
Wait for Wait for isNAK(rcvpkt)
sender call from ACK or udt_send(sndpkt) rdt_rcv(rcvpkt) && corrupt(rcvpkt)
above NAK
udt_send(NAK)

rdt_rcv(rcvpkt) && isACK(rcvpkt)

Wait for
L call from receiver
below

rdt_rcv(rcvpkt) && notcorrupt(rcvpkt)

extract(rcvpkt,data)
deliver_data(data)
udt_send(ACK)

Transport Layer: 3-18

rdt2.0 has a fatal flaw!
what happens if ACK/NAK handling duplicates:
corrupted?  sender retransmits current pkt
 sender doesn’t know what if ACK/NAK corrupted
happened at receiver!  sender adds sequence number
 can’t just retransmit: possible to each pkt
duplicate  receiver discards (doesn’t
deliver up) duplicate pkt

stop and wait

sender sends one packet, then
waits for receiver response
Transport Layer: 3-19
rdt2.1: sender, handling garbled ACK/NAKs
rdt_send(data)
sndpkt = make_pkt(0, data, checksum)
udt_send(sndpkt) rdt_rcv(rcvpkt) &&
(corrupt(rcvpkt) ||
Wait for Wait for isNAK(rcvpkt) )
call 0 from ACK or
NAK 0 udt_send(sndpkt)
above
rdt_rcv(rcvpkt)
rdt_rcv(rcvpkt)
&& notcorrupt(rcvpkt) &&
&& notcorrupt(rcvpkt)
isACK(rcvpkt)
&& isACK(rcvpkt)
L
L
Wait for Wait for
ACK or call 1 from
rdt_rcv(rcvpkt) NAK 1 above
&& (corrupt(rcvpkt) ||
isNAK(rcvpkt) ) rdt_send(data)

udt_send(sndpkt) sndpkt = make_pkt(1, data, checksum)

udt_send(sndpkt)

Transport Layer: 3-20

rdt2.1: receiver, handling garbled ACK/NAKs
rdt_rcv(rcvpkt) && notcorrupt(rcvpkt)
&& has_seq0(rcvpkt)
extract(rcvpkt,data)
deliver_data(data)
sndpkt = make_pkt(ACK, chksum)
udt_send(sndpkt)
rdt_rcv(rcvpkt) && (corrupt(rcvpkt) rdt_rcv(rcvpkt) && (corrupt(rcvpkt)
sndpkt = make_pkt(NAK, chksum) sndpkt = make_pkt(NAK, chksum)
udt_send(sndpkt) udt_send(sndpkt)
Wait for Wait for
rdt_rcv(rcvpkt) && 0 from 1 from rdt_rcv(rcvpkt) &&
not corrupt(rcvpkt) && below below not corrupt(rcvpkt) &&
has_seq1(rcvpkt) has_seq0(rcvpkt)
sndpkt = make_pkt(ACK, chksum) sndpkt = make_pkt(ACK, chksum)
udt_send(sndpkt) udt_send(sndpkt)
rdt_rcv(rcvpkt) && notcorrupt(rcvpkt)
&& has_seq1(rcvpkt)

extract(rcvpkt,data)
deliver_data(data)
sndpkt = make_pkt(ACK, chksum)
udt_send(sndpkt)

Transport Layer: 3-21

rdt2.1: discussion
sender: receiver:
 seq # added to pkt  must check if received packet
 two seq. #s (0,1) will suffice. is duplicate
Why? • state indicates whether 0 or 1 is
expected pkt seq #
 must check if received ACK/NAK
corrupted  note: receiver can not know if
its last ACK/NAK received OK
 twice as many states at sender
• state must “remember” whether
“expected” pkt should have seq #
of 0 or 1

Transport Layer: 3-22

rdt2.2: a NAK-free protocol
 same functionality as rdt2.1, using ACKs only
 instead of NAK, receiver sends ACK for last pkt received OK
• receiver must explicitly include seq # of pkt being ACKed
 duplicate ACK at sender results in same action as NAK:
retransmit current pkt

As we will see, TCP uses this approach to be NAK-free

Transport Layer: 3-23

rdt2.2: sender, receiver fragments
rdt_send(data)
sndpkt = make_pkt(0, data, checksum)
udt_send(sndpkt)
rdt_rcv(rcvpkt) &&
( corrupt(rcvpkt) ||
Wait for Wait for
ACK isACK(rcvpkt,1) )
call 0 from
above 0 udt_send(sndpkt)
sender FSM
fragment rdt_rcv(rcvpkt)
&& notcorrupt(rcvpkt)
rdt_rcv(rcvpkt) && && isACK(rcvpkt,0)
(corrupt(rcvpkt) || L
has_seq1(rcvpkt)) Wait for receiver FSM
0 from
udt_send(sndpkt) below fragment
rdt_rcv(rcvpkt) && notcorrupt(rcvpkt)
&& has_seq1(rcvpkt)
extract(rcvpkt,data)
deliver_data(data)
sndpkt = make_pkt(ACK1, chksum)
udt_send(sndpkt) Transport Layer: 3-24
rdt3.0: channels with errors and loss
New channel assumption: underlying channel can also lose
packets (data, ACKs)
• checksum, sequence #s, ACKs, retransmissions will be of help …
but not quite enough

Q: How do humans handle lost sender-to-

receiver words in conversation?

Transport Layer: 3-25

rdt3.0: channels with errors and loss
Approach: sender waits “reasonable” amount of time for ACK
 retransmits if no ACK received in this time
 if pkt (or ACK) just delayed (not lost):
• retransmission will be duplicate, but seq #s already handles this!
• receiver must specify seq # of packet being ACKed
 use countdown timer to interrupt after “reasonable” amount
of time
timeout

Transport Layer: 3-26

rdt3.0 sender
rdt_send(data)
sndpkt = make_pkt(0, data, checksum)
udt_send(sndpkt)
start_timer

Wait for Wait

call 0 from for
above ACK0
rdt_rcv(rcvpkt)
&& notcorrupt(rcvpkt) rdt_rcv(rcvpkt)
&& isACK(rcvpkt,1) && notcorrupt(rcvpkt)
stop_timer && isACK(rcvpkt,0)
stop_timer
Wait Wait for
for call 1 from
ACK1 above

rdt_send(data)
sndpkt = make_pkt(1, data, checksum)
udt_send(sndpkt)
start_timer

Transport Layer: 3-27

rdt3.0 sender
rdt_send(data)
rdt_rcv(rcvpkt) &&
sndpkt = make_pkt(0, data, checksum) ( corrupt(rcvpkt) ||
udt_send(sndpkt) isACK(rcvpkt,1) )
rdt_rcv(rcvpkt) start_timer L
L Wait for Wait
for timeout
call 0 from
ACK0 udt_send(sndpkt)
above
start_timer
rdt_rcv(rcvpkt)
&& notcorrupt(rcvpkt) rdt_rcv(rcvpkt)
&& isACK(rcvpkt,1) && notcorrupt(rcvpkt)
stop_timer && isACK(rcvpkt,0)
stop_timer
Wait Wait for
timeout for call 1 from
udt_send(sndpkt) ACK1 above
start_timer rdt_rcv(rcvpkt)
rdt_send(data) L
rdt_rcv(rcvpkt) &&
( corrupt(rcvpkt) || sndpkt = make_pkt(1, data, checksum)
isACK(rcvpkt,0) ) udt_send(sndpkt)
start_timer
L

Transport Layer: 3-28

rdt3.0 in action
sender receiver sender receiver
send pkt0 pkt0 send pkt0 pkt0
rcv pkt0 rcv pkt0
ack0 send ack0 ack0 send ack0
rcv ack0 rcv ack0
send pkt1 pkt1 send pkt1 pkt1
rcv pkt1 X
loss
ack1 send ack1
rcv ack1
send pkt0 pkt0
rcv pkt0 timeout
ack0 send ack0 resend pkt1 pkt1
rcv pkt1
ack1 send ack1
rcv ack1
send pkt0 pkt0
(a) no loss rcv pkt0
ack0 send ack0

(b) packet loss

Transport Layer: 3-29
rdt3.0 in action
sender receiver
sender receiver send pkt0
pkt0
rcv pkt0
send pkt0 pkt0 send ack0
ack0
rcv pkt0 rcv ack0
ack0 send ack0 send pkt1 pkt1
rcv ack0 rcv pkt1
send pkt1 pkt1 send ack1
rcv pkt1 ack1
ack1 send ack1
X timeout
loss resend pkt1
timeout
pkt1 rcv pkt1
resend pkt1 pkt1
rcv pkt1 rcv ack1 (detect duplicate)
send pkt0 pkt0 send ack1
(detect duplicate)
ack1 send ack1 ack1 rcv pkt0
rcv ack1 rcv ack1 send ack0
send pkt0 pkt0 (ignore) ack0
rcv pkt0
ack0 send ack0 pkt1

(c) ACK loss (d) premature timeout/ delayed ACK

Transport Layer: 3-30
Performance of rdt3.0 (stop-and-wait)
 U sender: utilization – fraction of time sender busy sending

 example: 1 Gbps link, 15 ms prop. delay, 8000 bit packet

• time to transmit packet into channel:
L 8000 bits
Dtrans = R = 9 = 8 microsecs
10 bits/sec

Transport Layer: 3-31

rdt3.0: stop-and-wait operation
sender receiver
first packet bit transmitted, t = 0

first packet bit arrives

RTT last packet bit arrives, send ACK

ACK arrives, send next

packet, t = RTT + L / R

Transport Layer: 3-32

rdt3.0: stop-and-wait operation
sender receiver

L/R L/R
Usender=
RTT + L / R
.008 RTT
=
30.008
= 0.00027

 rdt 3.0 protocol performance stinks!

 Protocol limits performance of underlying infrastructure (channel)

Transport Layer: 3-33

rdt3.0: pipelined protocols operation
pipelining: sender allows multiple, “in-flight”, yet-to-be-acknowledged
packets
• range of sequence numbers must be increased
• buffering at sender and/or receiver

Transport Layer: 3-34

Pipelining: increased utilization
sender receiver
first packet bit transmitted, t = 0
last bit transmitted, t = L / R

first packet bit arrives

RTT last packet bit arrives, send ACK
last bit of 2nd packet arrives, send ACK
last bit of 3rd packet arrives, send ACK
ACK arrives, send next
packet, t = RTT + L / R
3-packet pipelining increases
utilization by a factor of 3!

U 3L / R .0024
sender = = = 0.00081
RTT + L / R 30.008

Transport Layer: 3-35

Go-Back-N: sender
 sender: “window” of up to N, consecutive transmitted but unACKed pkts
• k-bit seq # in pkt header

 cumulative ACK: ACK(n): ACKs all packets up to, including seq # n

• on receiving ACK(n): move window forward to begin at n+1
 timer for oldest in-flight packet
 timeout(n): retransmit packet n and all higher seq # packets in window
Transport Layer: 3-36
Go-Back-N: receiver
 ACK-only: always send ACK for correctly-received packet so far, with
highest in-order seq #
• may generate duplicate ACKs
• need only remember rcv_base
 on receipt of out-of-order packet:
• can discard (don’t buffer) or buffer: an implementation decision
• re-ACK pkt with highest in-order seq #

Receiver view of sequence number space:

received and ACKed

… … Out-of-order: received but not ACKed

rcv_base
Not received
Transport Layer: 3-37
Go-Back-N in action
sender window (N=4) sender receiver
012345678 send pkt0
012345678 send pkt1
012345678 send pkt2 receive pkt0, send ack0
012345678 send pkt3 Xloss receive pkt1, send ack1
(wait)
receive pkt3, discard,
012345678 rcv ack0, send pkt4 (re)send ack1
012345678 rcv ack1, send pkt5 receive pkt4, discard,
(re)send ack1
ignore duplicate ACK receive pkt5, discard,
(re)send ack1
pkt 2 timeout
012345678 send pkt2
012345678 send pkt3
012345678 send pkt4 rcv pkt2, deliver, send ack2
012345678 send pkt5 rcv pkt3, deliver, send ack3
rcv pkt4, deliver, send ack4
rcv pkt5, deliver, send ack5

Transport Layer: 3-38

Selective repeat
receiver individually acknowledges all correctly received packets
• buffers packets, as needed, for eventual in-order delivery to upper
layer
sender times-out/retransmits individually for unACKed packets
• sender maintains timer for each unACKed pkt
sender window
• N consecutive seq #s
• limits seq #s of sent, unACKed packets

Transport Layer: 3-39

Selective repeat: sender, receiver windows

Transport Layer: 3-40

Chapter 3: roadmap
 Transport-layer services
 Multiplexing and demultiplexing
 Connectionless transport: UDP
 Principles of reliable data transfer
 Connection-oriented transport: TCP
• segment structure
• reliable data transfer
• flow control
• connection management
 Principles of congestion control
 TCP congestion control
Transport Layer: 3-41
TCP: overview RFCs: 793,1122, 2018, 5681, 7323
 point-to-point:  cumulative ACKs
• one sender, one receiver  pipelining:
 reliable, in-order byte • TCP congestion and flow control
steam: set window size
• no “message boundaries"  connection-oriented:
 full duplex data: • handshaking (exchange of control
• bi-directional data flow in messages) initializes sender,
same connection receiver state before data exchange
• MSS: maximum segment size  flow controlled:
• sender will not overwhelm receiver

Transport Layer: 3-42

 TCP segment structure
32 bits

source port # dest port # segment seq #: counting

ACK: seq # of next expected sequence number bytes of data into bytestream
byte; A bit: this is an ACK (not segments!)
acknowledgement number
head not
length (of TCP header) len used C EUAP R SF receive window flow control: # bytes
Internet checksum checksum Urg data pointer receiver willing to accept

options (variable length)

C, E: congestion notification
TCP options
application data sent by
RST, SYN, FIN: connection data application into
management (variable length) TCP socket

Transport Layer: 3-43

TCP sequence numbers, ACKs
outgoing segment from sender
Sequence numbers: source port # dest port #
sequence number
• byte stream “number” of acknowledgement number
rwnd
first byte in segment’s data checksum urg pointer

window size
Acknowledgements: N

• seq # of next byte expected

from other side sender sequence number space

• cumulative ACK sent sent, not- usable not

ACKed yet ACKed but not usable
(“in-flight”) yet sent
Q: how receiver handles out-of-
order segments outgoing segment from receiver

• A: TCP spec doesn’t say, - up

source port # dest port #
sequence number

to implementor acknowledgement number

A rwnd
checksum urg pointer
Transport Layer: 3-44
TCP sequence numbers, ACKs
Host A Host B

User types‘C’
Seq=42, ACK=79, data = ‘C’
host ACKs receipt
of‘C’, echoes back ‘C’
Seq=79, ACK=43, data = ‘C’
host ACKs receipt
of echoed ‘C’
Seq=43, ACK=80

simple telnet scenario

Transport Layer: 3-45
TCP round trip time, timeout
Q: how to set TCP timeout Q: how to estimate RTT?
value?  SampleRTT:measured time
 longer than RTT, but RTT varies! from segment transmission until
ACK receipt
 too short: premature timeout,
• ignore retransmissions
unnecessary retransmissions
 SampleRTT will vary, want
 too long: slow reaction to estimated RTT “smoother”
segment loss • average several recent
measurements, not just current
SampleRTT

Transport Layer: 3-46

TCP round trip time, timeout
EstimatedRTT = (1- )*EstimatedRTT + *SampleRTT
 exponential weighted moving average (EWMA)
 influence of past sample decreases exponentially fast
RTT: gaia.cs.umass.edu to fantasia.eurecom.fr
 typical value:  = 0.125 350

RTT: gaia.cs.umass.edu to fantasia.eurecom.fr

RTT (milliseconds)
300

250

RTT (milliseconds)
200

sampleRTT
150

EstimatedRTT

100
1 8 15 22 29 36 43 50 57 64 71 78 85 92 99 106
time (seconnds)
time (seconds)
SampleRTT Estimated RTT
Transport Layer: 3-47
TCP round trip time, timeout
 timeout interval: EstimatedRTT plus “safety margin”
• large variation in EstimatedRTT: want a larger safety margin
TimeoutInterval = EstimatedRTT + 4*DevRTT

estimated RTT “safety margin”

 DevRTT: EWMA of SampleRTT deviation from EstimatedRTT:

DevRTT = (1-)*DevRTT + *|SampleRTT-EstimatedRTT|
(typically,  = 0.25)

* Check out the online interactive exercises for more examples: http://gaia.cs.umass.edu/kurose_ross/interactive/
Transport Layer: 3-48
TCP Sender (simplified)
event: data received from event: timeout
application  retransmit segment that
caused timeout
 create segment with seq #
 restart timer
 seq # is byte-stream number
of first data byte in segment
event: ACK received
 start timer if not already
running  if ACK acknowledges
previously unACKed segments
• think of timer as for oldest
unACKed segment • update what is known to be
ACKed
• expiration interval:
TimeOutInterval • start timer if there are still
unACKed segments
Transport Layer: 3-49
TCP Receiver: ACK generation [RFC 5681]
Event at receiver TCP receiver action
arrival of in-order segment with delayed ACK. Wait up to 500ms
expected seq #. All data up to for next segment. If no next segment,
expected seq # already ACKed send ACK

arrival of in-order segment with immediately send single cumulative

expected seq #. One other ACK, ACKing both in-order segments
segment has ACK pending

arrival of out-of-order segment immediately send duplicate ACK,

higher-than-expect seq. # . indicating seq. # of next expected byte
Gap detected

arrival of segment that immediate send ACK, provided that

partially or completely fills gap segment starts at lower end of gap

Transport Layer: 3-50

TCP: retransmission scenarios
Host A Host B Host A Host B

SendBase=92
Seq=92, 8 bytes of data Seq=92, 8 bytes of data

Seq=100, 20 bytes of data

timeout

timeout
ACK=100
X
ACK=100
ACK=120

Seq=92, 8 bytes of data Seq=92, 8

SendBase=100 bytes of data send cumulative
SendBase=120 ACK for 120
ACK=100
ACK=120

SendBase=120

lost ACK scenario premature timeout

Transport Layer: 3-51

TCP: retransmission scenarios
Host A Host B

Seq=92, 8 bytes of data

Seq=100, 20 bytes of data

ACK=100
X
ACK=120

Seq=120, 15 bytes of data

cumulative ACK covers

for earlier lost ACK

Transport Layer: 3-52

TCP fast retransmit
Host A Host B
TCP fast retransmit
if sender receives 3 additional
ACKs for same data (“triple
duplicate ACKs”), resend unACKed
segment with smallest seq # X
 likely that unACKed segment lost,
so don’t wait for timeout

timeout
Receipt of three duplicate ACKs
indicates 3 segments received Seq=100, 20 bytes of data

after a missing segment – lost

segment is likely. So retransmit!

Transport Layer: 3-53

Chapter 3: roadmap
 Transport-layer services
 Multiplexing and demultiplexing
 Connectionless transport: UDP
 Principles of reliable data transfer
 Connection-oriented transport: TCP
• segment structure
• reliable data transfer
• flow control
• connection management
 Principles of congestion control
 TCP congestion control
Transport Layer: 3-54
TCP flow control
application
Q: What happens if network Application removing
process
layer delivers data faster than data from TCP socket
buffers
application layer removes TCP socket
data from socket buffers? receiver buffers

TCP
code
Network layer
delivering IP datagram
payload into TCP
IP
socket buffers
code

from sender

receiver protocol stack

Transport Layer: 3-55

TCP flow control
application
Q: What happens if network Application removing
process
layer delivers data faster than data from TCP socket
buffers
application layer removes TCP socket
data from socket buffers? receiver buffers

TCP
code
Network layer
delivering IP datagram
payload into TCP
IP
socket buffers
code

from sender

receiver protocol stack

Transport Layer: 3-56

TCP flow control
application
Q: What happens if network Application removing
process
layer delivers data faster than data from TCP socket
buffers
application layer removes TCP socket
data from socket buffers? receiver buffers

TCP
code

receive window
flow control: # bytes
receiver willing to accept IP
code

from sender

receiver protocol stack

Transport Layer: 3-57

TCP flow control
application
Q: What happens if network Application removing
process
layer delivers data faster than data from TCP socket
buffers
application layer removes TCP socket
data from socket buffers? receiver buffers

TCP
code
flow control
receiver controls sender, so
sender won’t overflow IP
code
receiver’s buffer by
transmitting too much, too fast
from sender

receiver protocol stack

Transport Layer: 3-58

TCP flow control
 TCP receiver “advertises” free buffer
space in rwnd field in TCP header to application process
• RcvBuffer size set via socket
options (typical default is 4096 bytes) RcvBuffer buffered data
• many operating systems autoadjust
RcvBuffer
rwnd free buffer space

 sender limits amount of unACKed

(“in-flight”) data to received rwnd TCP segment payloads

 guarantees receive buffer will not TCP receiver-side buffering

overflow

Transport Layer: 3-59

TCP flow control
flow control: # bytes receiver willing to accept

 TCP receiver “advertises” free buffer

space in rwnd field in TCP header
• RcvBuffer size set via socket
receive window
options (typical default is 4096 bytes)
• many operating systems autoadjust
RcvBuffer
 sender limits amount of unACKed
(“in-flight”) data to received rwnd
 guarantees receive buffer will not
overflow
TCP segment format

Transport Layer: 3-60

TCP connection management
before exchanging data, sender/receiver “handshake”:
 agree to establish connection (each knowing the other willing to establish connection)
 agree on connection parameters (e.g., starting seq #s)

application application

connection state: ESTAB connection state: ESTAB

connection variables: connection Variables:
seq # client-to-server seq # client-to-server
server-to-client server-to-client
rcvBuffer size rcvBuffer size
at server,client at server,client

network network

Socket clientSocket = Socket connectionSocket =

newSocket("hostname","port number"); welcomeSocket.accept();
Transport Layer: 3-61
 TCP 3-way handshake
Server state
serverSocket = socket(AF_INET,SOCK_STREAM)
Client state serverSocket.bind((‘’,serverPort))
serverSocket.listen(1)
clientSocket = socket(AF_INET, SOCK_STREAM) connectionSocket, addr = serverSocket.accept()
LISTEN
clientSocket.connect((serverName,serverPort)) LISTEN
choose init seq num, x
send TCP SYN msg
SYNSENT SYNbit=1, Seq=x
choose init seq num, y
send TCP SYNACK
msg, acking SYN SYN RCVD
SYNbit=1, Seq=y
ACKbit=1; ACKnum=x+1
received SYNACK(x)
ESTAB indicates server is live;
send ACK for SYNACK;
this segment may contain ACKbit=1, ACKnum=y+1
client-to-server data
received ACK(y)
indicates client is live
ESTAB

Transport Layer: 3-62

 Closing a TCP connection
 client, server each close their side of connection
• send TCP segment with FIN bit = 1
 respond to received FIN with ACK
• on receiving FIN, ACK can be combined with own FIN
 simultaneous FIN exchanges can be handled

Transport Layer: 3-63

Closing a TCP connection

Transport Layer: 3-64

Closing a TCP connection

Transport Layer: 3-65