Arjun Kumar Chaurasia: Field Application Engineer
Arjun Kumar Chaurasia: Field Application Engineer
Arjun Kumar Chaurasia: Field Application Engineer
SKILLS PROFILE
Power Electronics A highly motivated Application Engineer with experience in the electrical and electronic
manufacturing industry. An individual with a flair for learning. Learning which adds
Circuit Design dimensions to my thinking abilities, not only professionally but also personally. Objective is to use
the knowledge acquired for betterment of the society.
Digital Electronics
Control Design WORK EXPERIENCE
MATLAB & Simulink Field Application Engineer at OPAL-RT Technologies India, Bengaluru
January 2022 – Present
Python
Conduct simulation studies (primarily real-time) for various clients in the broad area of
Microsoft Office electrical and electronics.
Perform SIL, HIL, RCP and PHIL tests by exploring the various integration methods from
Leadership and Teamwork
software to firmware and interfacing with real hardware.
Project Management Conducts workshops, training and faculty development program on Real-time simulations and
usage of OPAL-RT simulators and tools.
Commissioning of battery cell simulator (BCS) and Battery management system (BMS)
LANGUAGES HIL Test Bench.
Integration of micro-grid test bench:
English An integration of various renewable sources as well as software tools that create a
virtual micro-grid in the lab environment. This enables the engineers to test and validate
Hindi their micro-grid controller.
Tools Worked with: Real-Time Simulator, Bi-directional Converter (Grid Emulator), PV
Emulator, Wind Emulator and Battery Emulator.
Supporting / resolving costumer’s issues.
Pre- sales demonstrations to assist the sales team.
Projects Undertaken-
1. Design and development of Ground Fault Detection device for unearthed IT systems:
Development of an insulation monitoring device to monitor insulation resistance and
provide trip/alarming signal during fault for DC high voltage applications.
2. Design and development of 2 kW off board EV charger: Design of PFC and DC/DC
converter including topology selection, magnetics design, switch selection, protection
circuit design, passive component selection, filter design, simulation.
EDUCATION
Master of Technology in Electrical Engineering
Indian Institute of Science, Bangalore
August 2018 – July 2020
High School
DALIMSS, Varanasi
April 2009 – May 2010
ACADEMIC PROJECTS
Micromachine for Real-Time Generator Simulation (M.Tech Project)
The main objective of the project included mimicking the transient behaviors of a large
machine using smaller machine aimed to minimize the deviation of results from the actual
transient responses in larger machine through down scaled machine.
State space and eigen value analysis of standard SMIB system.
Performance investigation of LCL Power Filter for Grid connected Solar Photovoltaic
System (B.Tech Project)
The project describes a design methodology for LCL filters for Grid connected PV
system. A methodology to mathematically get the filter inductor and capacitance
values for harmonic mitigation.
Simulated the obtained LCL filter design to verify the harmonic mitigation into the grid.
COURSES
Power Electronics, Design of Power Converters, Control System Design, Digital VLSI
Circuits, Electromagnetism, Advanced Power System Analysis
ENRICHMENT ACTIVITIES
Held the responsibility as the Secretary, Association of Electrical Engineers at HBTI, Kanpur.
Actively participated in various cultural, technical and sports events throughout the academic
career.
ACHIEVEMENTS