Chapter 2 Kinematics

Head to savemyexams.co.
uk for more awesome resources
YOUR NOTES
A Level Physics CIE 
2. Kinematics
CONTENTS
2.1 Equations of Motion
2.1.1 Displacement, Velocity & Acceleration
2.1.2 Motion Graphs
2.1.3 Area under a Velocity-Time Graph
2.1.4 Gradient of a Displacement-Time Graph
2.1.5 Gradient of a Velocity-Time Graph
2.1.6 Deriving Kinematic Equations
2.1.7 Solving Problems with Kinematic Equations
2.1.8 Acceleration of Free Fall Experiment
2.1.9 Projectile Motion
Page 1 of 23
© 2015-2021 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
Head to savemyexams.co.uk for more awesome resources
2.1 Equations of Motion YOUR NOTES


2.1.1 Displacement, Velocity & Acceleration
Defining Displacement, Velocity & Acceleration
Scalar quantities
Remember scalar quantities only have a magnitude (size)
Distance: the total length between two points
Speed: the total distance travelled per unit of time
Vector quantities
Remember vector quantities have both magnitude and direction
Displacement: the distance of an object from a fixed point in a specified
direction
Velocity: the rate of change of displacement of an object
Acceleration: the rate of change of velocity of an object
Equations
Equations linking displacement, velocity and acceleration
Page 2 of 23
2.1.2 Motion Graphs YOUR NOTES


Motion Graphs
Three types of graph that can represent motion are displacement-time graphs,
velocity-time graphs and acceleration-time graphs
On a displacement-time graph…
slope equals velocity
the y-intercept equals the initial displacement
a straight(diagonal) line represents a constant velocity
a curved line represents an acceleration
a positive slope represents motion in the positive direction
a negative slope represents motion in the negative direction
a zero slope (horizontal line) represents a state of rest
the area under the curve is meaningless
On a velocity-time graph…
slope equals acceleration
the y-intercept equals the initial velocity
a straight line represents uniform acceleration
a curved line represents non-uniform acceleration
a positive slope represents an increase in velocity in the positive direction
a negative slope represents an increase in velocity in the negative direction
a zero slope (horizontal line) represents motion with constant velocity
the area under the curve equals the displacement or distance travelled
Page 3 of 23
YOUR NOTES

On an acceleration-time graph…
slope is meaningless
the y-intercept equals the initial acceleration
a zero slope (horizontal line) represents an object undergoing constant
acceleration
the area under the curve equals the change in velocity
How displacement, velocity and acceleration graphs relate to each other
Page 4 of 23
2.1.3 Area under a Velocity-Time Graph YOUR NOTES


Area under a Velocity-Time Graph
Velocity-time graphs show the speed and direction of an object in motion over a
specific period of time
The area under a velocity-time graph is equal to the displacement of a moving
object
displacement = area under a velocity-time graph
 Worked Example
The velocity-time graph of a vehicle travelling with uniform acceleration is
shown in the diagram below.
Calculate the
displacement of the vehicle at 40 s.
Page 5 of 23
YOUR NOTES

 Exam Tip
Always check the values given on the y-axis of a motion graph - students
often confuse displacement-time graphs and velocity-time graphs.The area
under the graph can often be broken down into triangles, squares and
rectangles, so make sure you are comfortable with calculating area!
Page 6 of 23
2.1.4 Gradient of a Displacement-Time Graph YOUR NOTES


Gradient of a Displacement-Time Graph
Displacement-time graphs show the changing position of an object in motion
They also show whether an object is moving forwards (positive displacement) or
backwards (negative displacement)
A negative gradient = a negative velocity (the object is moving backwards)
The gradient (slope) of a displacement-time graph is equal to velocity
The greater the slope, the greater the velocity
 Worked Example
A car driver sees a hazard ahead and applies the brakes to bring the car to
rest.What does the displacement-time graph look like?
Page 7 of 23
YOUR NOTES

 Exam Tip
Don’t forget that velocity is a vector quantity; it has a size and a direction. If
velocity is initially positive and then becomes negative, then the object has
changed direction.
Page 8 of 23
2.1.5 Gradient of a Velocity-Time Graph YOUR NOTES


Gradient of a Velocity-Time Graph
Acceleration is any change in the velocity of an object in a given time
As velocity is a vector quantity, this means that if the speed of an object changes,
or its direction changes, then it is accelerating
An object that slows down tends to be described as ‘decelerating’
The gradient of a velocity-time graph is equal to acceleration
 Worked Example
What does the velocity-time graph look like for this acceleration-time
graph?
Page 9 of 23
YOUR NOTES

Page 10 of 23
2.1.6 Deriving Kinematic Equations YOUR NOTES


Deriving Kinematic Equations of Motion
The kinematic equations of motion are a set of four equations which can describe
any object moving with constant acceleration
They relate the five variables:
s = displacement
u = initial velocity
v = final velocity
a = acceleration
t = time interval
It’s important to know where these equations come from and how they are derived:
Page 11 of 23
A graph showing how the velocity of an object varies with time YOUR NOTES

The average velocity is halfway between u and v
Page 12 of 23
YOUR NOTES

The two terms ut and ½at2 make up the area under the graph
Page 13 of 23
YOUR NOTES

This final equation can be derived from two of the others
Summary of the four equations of uniformly accelerated motion
Page 14 of 23
2.1.7 Solving Problems with Kinematic Equations YOUR NOTES


Solving Problems with Kinematic Equations
Step 1: Write out the variables that are given in the question, both known and
unknown, and use the context of the question to deduce any quantities that aren’t
explicitly given
e.g. for vertical motion a = ± 9.81 m s–2, an object which starts or finishes at
rest will have u = 0 or v = 0
Step 2: Choose the equation which contains the quantities you have listed
e.g. the equation that links s, u, a and t is s = ut + ½at2
Step 3:Convert any units to SI units and then insert the quantities into the
equation and rearrange algebraically to determine the answer
 Worked Example
The diagram shows an arrangement to stop trains that are travelling too
fast. Trains
coming from the left travel at a speed of 50 ms-1. At marker 1, the driver
must apply the brakes so that the train decelerates uniformly in order to
pass marker 2 at no more than 10 ms-1.The train carries a detector that
notes the times when the train passes each marker and will apply an
emergency brake if the time between passing marker 1 and marker 2 is less
than 20 s.How far from marker 2 should marker 1 be placed?
Page 15 of 23
YOUR NOTES

 Exam Tip
This is arguably the most important section of this topic, you can always
be sure there will be one, or more, questions in the exam about solving
problems with the kinematic equations
The best way to master this section is to practice as many questions as
possible
Page 16 of 23
2.1.8 Acceleration of Free Fall Experiment YOUR NOTES


Acceleration of Free Fall Experiment
A common experiment to determine acceleration of a falling object which can be
carried out in the lab
Apparatus
Metre rule, ball bearing, electromagnet, electronic timer, trapdoor
Apparatus used to measure g
Method
When the current to the magnet switches off, the ball drops and the timer starts
When the ball hits the trapdoor, the timer stops
The reading on the timer indicates the time it takes for the ball to fall a distance, h
This procedure is repeated several times for different values of h, in order to
reduce random error
The distance, h, can be measured using a metre rule as it would be preferable to
use for distances between 20 cm – 1 m
Page 17 of 23
Analysing data YOUR NOTES

To find g , use the same steps as in the problem solving section 
The known quantities are
Displacement s = h
Time taken = t
Initial velocity u = 0
Acceleration a = g
The equation that links these quantities is
s = ut + ½ at2
h = ½ gt2
Using this equation, deduce g from the gradient of the graph of h against t2
Sources of error
Systematic error: residue magnetism after the electromagnet is switched off may
cause the time to be recorded as longer than it should be
Random error: large uncertainty in distance from using a metre rule with a
precision of 1mm, or from parallax error
Page 18 of 23
2.1.9 Projectile Motion YOUR NOTES


Projectile Motion
The trajectory of an object undergoing projectile motion consists of a vertical
component and a horizontal component
These need to be evaluated separately
Some key terms to know, and how to calculate them, are:
Time of flight: how long the projectile is in the air
Maximum height attained: the height at which the projectile is momentarily at
rest
Range: the horizontal distance travelled by the projectile
Page 19 of 23
YOUR NOTES

How to find the time of flight, maximum height and range
Remember: the only force acting on the projectile, after it has been released, is
gravity
There are three possible scenarios for projectile motion:
Vertical projection
Horizontal projection
Projection at an angle
Let’s consider each in turn:
Page 20 of 23
Worked Example YOUR NOTES

 
To calculate vertical projection(free fall)
A science museum designed an experiment to show the fall of a feather in a
vertical glass vacuum tube.
The time of fall from rest is 0.5 s.
What it the length of the tube, L?
Page 21 of 23

 
To calculate horizontal projection
A motorcycle stunt-rider moving horizontally takes off from a point 1.25 m
above the ground, landing 10 m away as shown.
What was the speed at take-off?
Page 22 of 23

 
To calculate projection at an angle
A ball is thrown from a point P with an initial velocity u of 12 m s-1 at 50° to
the horizontal.
What is the value of the maximum height at Q?
 Exam Tip
Make sure you don’t make these common mistakes:
Forgetting that deceleration is negative as the object rises
Confusing the direction of sin θ and cos θ
Not converting units (mm, cm, km etc.) to metres
Page 23 of 23

Chapter 2 Kinematics

Uploaded by

Copyright:

Available Formats

Chapter 2 Kinematics

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Chapter 2 Kinematics

Uploaded by

Copyright:

Available Formats

Head to savemyexams.co.

uk for more awesome resources

2.1 Equations of Motion YOUR NOTES

Equations linking displacement, velocity and acceleration

2.1.2 Motion Graphs YOUR NOTES

How displacement, velocity and acceleration graphs relate to each other

2.1.3 Area under a Velocity-Time Graph YOUR NOTES

displacement of the vehicle at 40 s.

2.1.4 Gradient of a Displacement-Time Graph YOUR NOTES

2.1.5 Gradient of a Velocity-Time Graph YOUR NOTES

2.1.6 Deriving Kinematic Equations YOUR NOTES

The average velocity is halfway between u and v

This final equation can be derived from two of the others

Summary of the four equations of uniformly accelerated motion

2.1.7 Solving Problems with Kinematic Equations YOUR NOTES

2.1.8 Acceleration of Free Fall Experiment YOUR NOTES

Apparatus used to measure g

Analysing data YOUR NOTES

2.1.9 Projectile Motion YOUR NOTES

How to find the time of flight, maximum height and range

Let’s consider each in turn:

Worked Example YOUR NOTES

What it the length of the tube, L?

Worked Example YOUR NOTES

Worked Example YOUR NOTES

You might also like