AUDEO SERIES

loudspeaker cabinets AUDEO103

The AUDEO loudspeaker series strikes the perfect balance between the inte-
lligibility and sound reproduction quality requirements currently demanded in
the professional audio installation and ever increasing demands with respect to AUDEO103
aesthetics, design and integration into all types of architectural environments.
•• 25 W RMS - 8 ohms
AUDEO has a balanced, innovative design, resulting from the collaboration bet- •• Efficiency: 90 dB SPL 1 W / 1 m
ween Ecler and the prestigious group Giugiaro Design during the conceptual and •• 8 ohm / 100 V (2.5, 5, 7.5 or 15 W)

AUDEO103
the external design phases of the speakers. This factor, together with its high qua- mode switch
lity sound reproduction, make this series the ideal solution for use in numerous •• 3.5” woofer and 13 mm Tweeter
sound projects: corporate and residential buildings, commercial premises, leisure
•• Frequency response (-10 dB):
centres, health centres, conference and meeting rooms, auditoriums, museums,
etc. •• 110 Hz to 20 kHz
•• Dimensions: 132 x 134 x 110 mm
This versatile series, which comes in three sizes (AUDEO 103, 106 and 108), and in •• Weight: 1.45 kg
black or white, is completed by its wall/ceiling supports which allow the cabling to
be concealed and make it possible to install the speakers at low (8 ohms) or high
impedance operation (100 V line).

In addition to the included wall bracket, the 103 and 106 models can use the
DSTANDAUDEO desktop stand. If you need to mount the AUDEO speakers on a
microphone stand, then the MSTANDAUDEO is the right accessory to use.
For a subwoofer reinforcement of the AUDEO series speakers, try the AUDEO
SB110P self-powered subwoofer cabinet.

Key features

•• Full range, 2-way acoustic boxes.

•• Made of reinforced ABS
•• Available in black or white
•• 8 ohms / 100 V line operating switch
•• Accessories for wall-mounting included
•• IP 54 class for installing outdoors
•• Protective grille at the front with anti-rust treatment

Recommended amplification
•• DPA, GPA and LPA series
•• HMA120 and HMA180 self-powered mixers
•• CA series compact RS-232 amplifiers
•• MPA-R multi-channel amplifiers line (low impe
dance or high impedance with DLA adapters)
•• NXA multi-channel amplifiers with built-in Applications:
DSP and remote Ethernet management (low
impedance) •• Corporate and residential buildings
•• HZA multi-channel 100 V line amplifiers •• Commercial premises
•• HSA series amplifiers (high impedance) •• Leisure centres
•• Sound reinforcement in clubs, bars, etc.
•• Health and sports centres
•• Meeting and conference rooms
•• Auditoriums, museums
 AUDEO SERIES
AUDEO106 loudspeaker cabinets

AUDEO106

AUDEO106
•• 50 W RMS - 8 ohms
•• Efficiency: 92,5 dB SPL 1 W / 1 m
•• 8 ohm / 100 V (5, 7,5, 15 or 30 W) mode switch
•• 6.5” woofer and 25 mm Tweeter
•• Frequency response (-10 dB): 90 Hz to 20 kHz
•• Dimensions: 242 x 242 x 163 mm
•• Weight: 2.3 kg
 AUDEO SERIES
loudspeaker cabinets AUDEO108, STANDAUDEO, MSTANDAUDEO

AUDEO108
•• 100 W RMS - 8 ohms
•• Efficiency: 94,5 dB SPL 1 W / 1 m
•• 8 ohm / 100 V (7,5, 15, 30 o 60 W) mode switch
•• 8” Kevlar woofer and 1” ACCW silk dome tweeter
•• Frequency response (-10 dB): 65 Hz to 22 kHz
•• Aluminium made wall bracket
•• Dimensions: 300 x 310 x 225 mm
•• Weight:: 3.75 kg

MSTANDAUDEO
DSTANDAUDEO
AUDEO108

Desktop stand for the AUDEO103 and AUDEO106 models

DSTANDAUDEO
MSTANDAUDEO
Microphone stand adapter for the AUDEO series speakers

MSTANDAUDEO
Technical Characteristics AUDEO103 AUDEO106 AUDEO108
Ways 2 2 2
Nominal low impedance 8Ω 8Ω 8Ω
Max RMS power 25W 50W 100W
Program power 50W 100W 200W
Nominal high impedance 100V LINE 100V LINE 100V LINE
Power selector 2.5 / 5 / 7.5 / 15W 5 / 7.5 / 15 / 30W 7.5 / 15 / 30 / 60W
Efficiency SPL 1W 1m 90 dB 92.5 dB 94.5 dB
Frequency response at -3dB @ 8Ω 110Hz ÷ 20kHz 90Hz ÷ 20kHz 65Hz ÷ 22kHz
Dimensions WxHxD (without accessories) 132x134x110mm 242x242x163mm 300x310x223mm
Weight 1.45 kg 2.3 kg 3.75 kg
 AUDEO SERIES
AUDEOSB110P, AUDEOSB110, AUDEOSB10P21 loudspeaker cabinets

AUDEOSB110P
AUDEOSB110
The AUDEO SB110 is a passive subwoofer reinforcement unit
for the AUDEO series loudspeakers.

Key features
•• 10” driver

AUDEOSB110
•• 150 W RMS maximum power
•• Euroblock / clip double INPUT / STACK terminals
•• Internal LPF with 2 frequency settings

AUDEOSB110P
The AUDEO SB110P is the self-powered subwoofer reinforcement unit of the
AUDEO series. With a discreet design that enables its use in any environ-
ment, this 10”, 150 W RMS model, is the ideal partner for the AUDEOs in
those music applications where extended low-end response is required.

Key features

•• 10” driver
•• 150 W RMS integrated amplifier

AUDEOSB10P21
•• RCA inputs with mono conversion
•• RCA stack outputs (link to other SB110P units, AUDEO speakers, etc.)
•• PHASE and volume controls
•• Internal 150Hz/18dB oct. LPF

AUDEOSB10P21
Complete 2.1 audio unit, including a self-powered 10” subwoofer louds-
Technical Characteristics AUDEOSB110P peaker and an integrated stereo amplifier for the connection of stereo
Driver 1x10* Bass satellite loudspeaker lines.
Power output (RMS) 150W
Maximum SPL (dB@1m) 112dB Key features
Inputs sensitivity nom/impedance 0dBV 1V › 1kΩ
Connector type RCA
•• 10” driver and integrated amplifier for the subwoofer way
Frequency response (-10dB) 40Hz •• Integrated stereo amplifier for satellite loudspeakers. Admits 2 Ω loads!
Crossover filter (-3dB) 150Hz/18dB oct. (from 1 up to 4 Ecler loudspeakers in parallel at each amplifier output)
Mains AC 115V/230V 50-60Hz
•• Global programme power: 450W (150 W for subwoofer way / 2 x 150 W for
Power consumption (pink noise, 1/8 power) 107VA
(pink noise, 1/3 power) 152VA stereo satellite loudspeakers)
(max.power) 237VA •• RCA and Euroblock INPUT/STACK terminals
Dimension (WxDxH mm/Pcs.) 310x505x420mm •• LPF, POLARITY, MASTER VOL and SUB VOL controls
Weight 16.75kg
•• REMOTE VOL control port (0-10 VDC)

All product characteristics are subject to variation due to production tolerances. ECLER - NEEC AUDIO BARCELONA S.L reserves the right to make changes or improvements in the design or manufacturing that may affect these product specifications.
Motors, 166-168 08038 Barcelona - Spain - Domestic sales / Ventas España (+34) 932238400 Export sales / Ventas Export (+34) 932238401 General calls (+34) 932238403 [email protected] www.ecler.com