Scribd
Upload
30 views4 pages

Introduction To Wireless LAN

The document discusses wireless LANs for small home networks and larger enterprise networks. It explains how a home wireless router integrates switching, routing, WiFi access point and modem functions. Larger networks use wireless LAN controllers and light weight access points to manage authentication, roaming and traffic forwarding across multiple access points.

Uploaded by

Ahmed Jaha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
30 views4 pages

Introduction To Wireless LAN

The document discusses wireless LANs for small home networks and larger enterprise networks. It explains how a home wireless router integrates switching, routing, WiFi access point and modem functions. Larger networks use wireless LAN controllers and light weight access points to manage authentication, roaming and traffic forwarding across multiple access points.

Uploaded by

Ahmed Jaha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Introduction to Wireless LAN

Lesson Contents
 SOHO Wireless LAN
 Enterprise Wireless LAN
 Conclusion
Nowadays, there are about more wireless than wired devices. About 10 years ago, most
offices only had desktops and some other network devices like printers. All of these were
connected with wires. Today, a lot of users have a laptop, smartphone, and tablet. That’s
three wireless devices for each user. Wireless speeds have increased significantly, getting
close to wireless Gigabit.
IEEE uses 802.11 for all protocols that are related to wireless. Most of us have seen or
heard about 802.11a, 802.11b, 802.11g, 802.11n and/or 802.11ac before. We also have
the Wi-Fi Alliance that helps with the promotion of wireless networking. For example,
IEEE has described authentication and encryption in their 802.11i standard. The Wi-Fi
alliance has based WEP, WPA, and WPA2 on this standard. These names are easier to
work with than referring to 802.11i.
SOHO Wireless LAN
Your router at home probably has the same capabilities as the one below:

It is connected to your ISP through cable or DSL, or perhaps fiber. It has some Ethernet
ports to connect your computers and it has antennas for wireless users. In reality, these
components are all built into one device:
 Ethernet Switch
 Wireless Access Point
 (Cable or DSL Modem)
 Router
If you take everything apart, it looks like this:
In small networks like this, the AP does everything by itself. We call this an autonomous
access point. It uses 802.11 protocols to talk with the wireless clients and uses Ethernet
on the LAN side.
Enterprise Wireless LAN
When we look at large Enterprise networks, a single access point is not enough. Imagine
a network with hundreds or thousands of users. When you walk around the office, you
don’t want to get disconnected every time when your phone switches from one access
point to another. You want to have a stable wireless connection, wherever you go.
Switching seamlessly from one access point to another is called roaming.
A single access point also has limited bandwidth. If you have a meeting room with 100
users then a single access point might be unable to provide enough bandwidth for
everyone.
Since we use wireless networking for our users, it has to be close to our users. That’s why
you will find access points on the access layer of your network, just like your computers
and printers:
There’s still one issue. Let’s say you are connected to an access point and you start
walking around the office, your phone will switch to another access point. How does this
second access point know that you are already authenticated to the network? You could
re-authenticate but that will break your connection…not a good idea. With autonomous
access points, roaming could be difficult. To guarantee seamless roaming, the access
points need to exchange authentication information of a client that roams from one access
point to another.
Nowadays, most wireless networks use a wireless LAN controller:
All management tasks are moved from the access points to the wireless LAN controller.
It takes care of authentication, roaming, creating new wireless networks, etc. The access
points are only responsible for forwarding traffic, we call these LWAPs (Light Weight
Access Point).
To achieve this, all traffic has to be sent from the access points to the wireless LAN
controller. This is done by tunnels called CAPWAP (Control And Provisioning of
Wireless Access Points). The green dotted lines are the CAPWAP tunnels between the
APs and WLC.
We now have one big wireless network. If you create a new wireless network (SSID)
then it will be pushed to all access points. Roaming is also no problem since all traffic is
forwarded to the WLC.
Conclusion
You have now learned the basics of Wireless LANs:
 The SOHO router is a switch, router, access point and (optionally) modem all in
one device.
 The access point is called an autonomous access point since it does everything.
Wireless authentication, forwarding traffic between the LAN / Wireless LAN, etc.
 Enterprise wireless LANs use a WLC (Wireless LAN Controller) and LWAPs
(Light-Weight Access Point).
 Management tasks like creating wireless networks, authentication and roaming is
all done in the WLC. The LWAPs are responsible of forwarding wireless traffic to
and from the LAN.
 The WLC and LWAPs allow us to create a big, scalable wireless network.

You might also like