Wireshark User's Guide

20350 for Wireshark 0.99.5

Ulf Lamping,
Richard Sharpe, NS Computer Software and Services P/L
Ed Warnicke,
 Wireshark User's Guide: 20350

for Wireshark 0.99.5

by Ulf Lamping, Richard Sharpe, and Ed Warnicke
Copyright © 2004-2007 Ulf Lamping Richard Sharpe Ed Warnicke
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU General Public License, Ver-
sion 2 or any later version published by the Free Software Foundation.

All logos and trademarks in this document are property of their respective owner.
Table of Contents
Preface ................................................................................................................... viii
1. Foreword .................................................................................................... viii
2. Who should read this document? ....................................................................... ix
3. Acknowledgements .......................................................................................... x
4. About this document ....................................................................................... xi
5. Where to get the latest copy of this document? .................................................... xii
6. Providing feedback about this document ........................................................... xiii
1. Introduction ............................................................................................................ 1
1.1. What is Wireshark? ....................................................................................... 1
1.1.1. Some intended purposes ....................................................................... 1
1.1.2. Features ............................................................................................ 1
1.1.3. Live capture from many different network media ...................................... 2
1.1.4. Import files from many other capture programs ........................................ 2
1.1.5. Export files for many other capture programs ........................................... 2
1.1.6. Many protocol decoders ....................................................................... 3
1.1.7. Open Source Software ......................................................................... 3
1.1.8. What Wireshark is not ......................................................................... 3
1.2. System Requirements ..................................................................................... 4
1.2.1. General Remarks ................................................................................ 4
1.2.2. Microsoft Windows ............................................................................. 4
1.2.3. Unix / Linux ...................................................................................... 5
1.3. Where to get Wireshark? ................................................................................ 6
1.4. A brief history of Wireshark ............................................................................ 7
1.5. Development and maintenance of Wireshark ...................................................... 8
1.6. Reporting problems and getting help ................................................................. 9
1.6.1. Website ............................................................................................ 9
1.6.2. Wiki ................................................................................................. 9
1.6.3. FAQ ................................................................................................. 9
1.6.4. Mailing Lists ..................................................................................... 9
1.6.5. Reporting Problems ........................................................................... 10
1.6.6. Reporting Crashes on UNIX/Linux platforms ......................................... 10
1.6.7. Reporting Crashes on Windows platforms ............................................. 11
2. Building and Installing Wireshark ............................................................................. 13
2.1. Introduction ............................................................................................... 13
2.2. Obtaining the source and binary distributions .................................................... 14
2.3. Before you build Wireshark under UNIX ......................................................... 15
2.4. Building Wireshark from source under UNIX ................................................... 18
2.5. Installing the binaries under UNIX ................................................................. 20
2.5.1. Installing from rpm's under RedHat and alike ......................................... 20
2.5.2. Installing from deb's under Debian ....................................................... 20
2.5.3. Installing from portage under Gentoo Linux ........................................... 20
2.5.4. Installing from packages under FreeBSD ............................................... 20
2.6. Troubleshooting during the install on Unix ....................................................... 21
2.7. Building from source under Windows ............................................................. 22
2.8. Installing Wireshark under Windows .............................................................. 23
2.8.1. Install Wireshark .............................................................................. 23
2.8.2. Install WinPcap ................................................................................ 25
2.8.3. Update Wireshark ............................................................................. 25
2.8.4. Update WinPcap ............................................................................... 25
2.8.5. Uninstall Wireshark .......................................................................... 26
2.8.6. Uninstall WinPcap ............................................................................ 26
3. User Interface ....................................................................................................... 28
3.1. Introduction ............................................................................................... 28

iv
 Wireshark User's Guide

3.2. Start Wireshark ........................................................................................... 29

3.3. The Main window ....................................................................................... 30
3.3.1. Main Window Navigation .................................................................. 31
3.4. The Menu .................................................................................................. 32
3.5. The "File" menu .......................................................................................... 34
3.6. The "Edit" menu ......................................................................................... 37
3.7. The "View" menu ........................................................................................ 39
3.8. The "Go" menu ........................................................................................... 43
3.9. The "Capture" menu .................................................................................... 45
3.10. The "Analyze" menu .................................................................................. 47
3.11. The "Statistics" menu ................................................................................. 49
3.12. The "Help" menu ....................................................................................... 52
3.13. The "Main" toolbar .................................................................................... 54
3.14. The "Filter" toolbar .................................................................................... 57
3.15. The "Packet List" pane ............................................................................... 59
3.16. The "Packet Details" pane ........................................................................... 60
3.17. The "Packet Bytes" pane ............................................................................. 61
3.18. The Statusbar ............................................................................................ 62
4. Capturing Live Network Data .................................................................................. 64
4.1. Introduction ............................................................................................... 64
4.2. Prerequisites ............................................................................................... 65
4.3. Start Capturing ........................................................................................... 66
4.4. The "Capture Interfaces" dialog box ................................................................ 67
4.5. The "Capture Options" dialog box .................................................................. 69
4.5.1. Capture frame .................................................................................. 70
4.5.2. Capture File(s) frame ......................................................................... 71
4.5.3. Stop Capture... frame ......................................................................... 71
4.5.4. Display Options frame ....................................................................... 72
4.5.5. Name Resolution frame ..................................................................... 72
4.5.6. Buttons ........................................................................................... 72
4.6. Capture files and file modes .......................................................................... 73
4.7. Link-layer header type ................................................................................. 75
4.8. Filtering while capturing ............................................................................... 76
4.8.1. Automatic Remote Traffic Filtering ...................................................... 77
4.9. While a Capture is running ... ........................................................................ 79
4.9.1. Stop the running capture .................................................................... 79
4.9.2. Restart a running capture .................................................................... 80
5. File Input / Output and Printing ................................................................................ 82
5.1. Introduction ............................................................................................... 82
5.2. Open capture files ....................................................................................... 83
5.2.1. The "Open Capture File" dialog box ..................................................... 83
5.2.2. Input File Formats ............................................................................. 85
5.3. Saving captured packets ............................................................................... 87
5.3.1. The "Save Capture File As" dialog box ................................................. 87
5.3.2. Output File Formats .......................................................................... 89
5.4. Merging capture files ................................................................................... 91
5.4.1. The "Merge with Capture File" dialog box ............................................. 91
5.5. File Sets .................................................................................................... 93
5.5.1. The "List Files" dialog box ................................................................. 93
5.6. Exporting data ............................................................................................ 95
5.6.1. The "Export as Plain Text File" dialog box ............................................ 95
5.6.2. The "Export as PostScript File" dialog box ............................................ 96
5.6.3. The "Export as CSV (Comma Separated Values) File" dialog box .............. 96
5.6.4. The "Export as PSML File" dialog box ................................................. 97
5.6.5. The "Export as PDML File" dialog box ................................................. 97
5.6.6. The "Export selected packet bytes" dialog box ........................................ 98
5.7. Printing packets ........................................................................................ 100
5.7.1. The "Print" dialog box ..................................................................... 100

v
 Wireshark User's Guide

5.8. The Packet Range frame ............................................................................. 102

5.9. The Packet Format frame ............................................................................ 103
6. Working with captured packets ............................................................................... 105
6.1. Viewing packets you have captured .............................................................. 105
6.2. Pop-up menus ........................................................................................... 107
6.2.1. Pop-up menu of the "Packet List" pane ............................................... 107
6.2.2. Pop-up menu of the "Packet Details" pane ........................................... 108
6.2.3. Pop-up menu of the "Packet Bytes" pane ............................................. 110
6.3. Filtering packets while viewing .................................................................... 112
6.4. Building display filter expressions ................................................................ 114
6.4.1. Display filter fields ......................................................................... 114
6.4.2. Comparing values ........................................................................... 114
6.4.3. Combining expressions .................................................................... 116
6.4.4. A common mistake ......................................................................... 117
6.5. The "Filter Expression" dialog box ............................................................... 118
6.6. Defining and saving filters .......................................................................... 120
6.7. Finding packets ......................................................................................... 123
6.7.1. The "Find Packet" dialog box ............................................................ 123
6.7.2. The "Find Next" command ............................................................... 124
6.7.3. The "Find Previous" command .......................................................... 124
6.8. Go to a specific packet ............................................................................... 125
6.8.1. The "Go Back" command ................................................................. 125
6.8.2. The "Go Forward" command ............................................................ 125
6.8.3. The "Go to Packet" dialog box .......................................................... 125
6.8.4. The "Go to Corresponding Packet" command ....................................... 125
6.8.5. The "Go to First Packet" command .................................................... 125
6.8.6. The "Go to Last Packet" command ..................................................... 125
6.9. Marking packets ........................................................................................ 126
6.10. Time display formats and time references ..................................................... 127
6.10.1. Packet time referencing .................................................................. 127
7. Advanced Topics ................................................................................................. 130
7.1. Introduction ............................................................................................. 130
7.2. Following TCP streams .............................................................................. 131
7.2.1. The "Follow TCP Stream" dialog box ................................................. 131
7.3. Time Stamps ............................................................................................ 133
7.3.1. Wireshark internals ......................................................................... 133
7.3.2. Capture file formats ........................................................................ 133
7.3.3. Accuracy ....................................................................................... 133
7.4. Time Zones .............................................................................................. 135
7.4.1. Set your computer's time correct! ....................................................... 136
7.4.2. Wireshark and Time Zones ............................................................... 136
7.5. Packet Reassembling ................................................................................. 138
7.5.1. What is it? ..................................................................................... 138
7.5.2. How Wireshark handles it ................................................................ 138
7.6. Name Resolution ....................................................................................... 140
7.6.1. Name Resolution drawbacks ............................................................. 140
7.6.2. Ethernet name resolution (MAC layer) ................................................ 140
7.6.3. IP name resolution (network layer) ..................................................... 141
7.6.4. IPX name resolution (network layer) .................................................. 141
7.6.5. TCP/UDP port name resolution (transport layer) ................................... 141
7.7. Checksums .............................................................................................. 142
7.7.1. Wireshark checksum validation ......................................................... 142
7.7.2. Checksum offloading ....................................................................... 143
8. Statistics ............................................................................................................ 145
8.1. Introduction ............................................................................................. 145
8.2. The "Summary" window ............................................................................. 146
8.3. The "Protocol Hierarchy" window ................................................................ 149
8.4. Endpoints ................................................................................................ 151

vi
 Wireshark User's Guide

8.4.1. What is an Endpoint? ....................................................................... 151

8.4.2. The "Endpoints" window .................................................................. 151
8.4.3. The protocol specific "Endpoint List" windows .................................... 152
8.5. Conversations ........................................................................................... 153
8.5.1. What is a Conversation? ................................................................... 153
8.5.2. The "Conversations" window ............................................................ 153
8.5.3. The protocol specific "Conversation List" windows ............................... 153
8.6. The "IO Graphs" window ............................................................................ 154
8.7. Service Response Time .............................................................................. 156
8.7.1. The "Service Response Time DCE-RPC" window ................................. 156
8.8. The protocol specific statistics windows ........................................................ 158
9. Customizing Wireshark ......................................................................................... 160
9.1. Introduction ............................................................................................. 160
9.2. Start Wireshark from the command line ......................................................... 161
9.3. Packet colorization .................................................................................... 166
9.4. Control Protocol dissection ......................................................................... 170
9.4.1. The "Enabled Protocols" dialog box ................................................... 170
9.4.2. User Specified Decodes ................................................................... 172
9.4.3. Show User Specified Decodes ........................................................... 173
9.5. Preferences .............................................................................................. 175
A. Files and Folders ................................................................................................. 178
A.1. Capture Files ........................................................................................... 178
A.1.1. Libpcap File Contents ..................................................................... 178
A.1.2. Not Saved in the Capture File ........................................................... 178
A.2. Configuration Files and Folders ................................................................... 180
A.3. Windows folders ...................................................................................... 185
A.3.1. Windows profiles ........................................................................... 185
A.3.2. Windows NT/2000/XP roaming profiles ............................................. 185
A.3.3. Windows temporary folder .............................................................. 185
B. Protocols and Protocol Fields ................................................................................ 188
C. Wireshark Messages ............................................................................................ 189
C.1. Packet List Messages ................................................................................. 189
C.1.1. [Malformed Packet] ........................................................................ 189
C.1.2. [Packet size limited during capture] ................................................... 189
C.2. Packet Details Messages ............................................................................ 190
C.2.1. [Response in frame: 123] ................................................................. 190
C.2.2. [Request in frame: 123] ................................................................... 190
C.2.3. [Time from request: 0.123 seconds] ................................................... 190
D. Related command line tools .................................................................................. 192
D.1. Introduction ............................................................................................. 192
D.2. tshark: Terminal-based Wireshark .............................................................. 193
D.3. tcpdump: Capturing with tcpdump for viewing with Wireshark ........................ 194
D.4. dumpcap: Capturing with dumpcap for viewing with Wireshark ....................... 195
D.5. capinfos: Print information about capture files ............................................... 196
D.6. editcap: Edit capture files .......................................................................... 197
D.7. mergecap: Merging multiple capture files into one ......................................... 201
D.8. text2pcap: Converting ASCII hexdumps to network captures ........................... 204
D.9. idl2wrs: Creating dissectors from CORBA IDL files ....................................... 207
D.9.1. What is it? .................................................................................... 207
D.9.2. Why do this? ................................................................................. 207
D.9.3. How to use idl2wrs ......................................................................... 207
D.9.4. TODO ......................................................................................... 209
D.9.5. Limitations ................................................................................... 209
D.9.6. Notes ........................................................................................... 209
E. This Document's License (GPL) ............................................................................. 211

vii
Preface
1. Foreword
Wireshark is one of those programs that many network managers would love to be able to use, but they
are often prevented from getting what they would like from Wireshark because of the lack of document-
ation.

This document is part of an effort by the Wireshark team to improve the usability of Wireshark.

We hope that you find it useful, and look forward to your comments.

viii
 Preface

2. Who should read this document?

The intended audience of this book is anyone using Wireshark.

This book will explain all the basics and also some of the advanced features that Wireshark provides. As
Wireshark has become a very complex program since the early days, not every feature of Wireshark
might be explained in this book.

This book is not intended to explain network sniffing in general and it will not provide details about spe-
cific network protocols. A lot of useful information regarding these topics can be found at the Wireshark
Wiki at http://wiki.wireshark.org

By reading this book, you will learn how to install Wireshark, how to use the basic elements of the
graphical user interface (like the menu) and what's behind some of the advanced features that are maybe
not that obvious at first sight. It will hopefully guide you around some common problems that frequently
appears for new (and sometimes even advanced) users of Wireshark.

ix
 Preface

3. Acknowledgements
The authors would like to thank the whole Wireshark team for their assistance. In particular, the authors
would like to thank:

• Gerald Combs, for initiating the Wireshark project and funding to do this documentation.

• Guy Harris, for many helpful hints and a great deal of patience in reviewing this document.

• Gilbert Ramirez, for general encouragement and helpful hints along the way.

The authors would also like to thank the following people for their helpful feedback on this document:

• Pat Eyler, for his suggestions on improving the example on generating a backtrace.

• Martin Regner, for his various suggestions and corrections.

• Graeme Hewson, for a lot of grammatical corrections.

The authors would like to acknowledge those man page and README authors for the Wireshark project
from who sections of this document borrow heavily:

• Scott Renfro from whose mergecap man page Section D.7, “mergecap: Merging multiple capture
files into one ” is derived.

• Ashok Narayanan from whose text2pcap man page Section D.8, “text2pcap: Converting ASCII
hexdumps to network captures ” is derived.

• Frank Singleton from whose README.idl2wrs Section D.9, “idl2wrs: Creating dissectors from
CORBA IDL files ” is derived.

x
 Preface

4. About this document

This book was originally developed by Richard Sharpe with funds provided from the Wireshark Fund. It
was updated by Ed Warnicke and more recently redesigned and updated by Ulf Lamping.

It is written in DocBook/XML.

You will find some specially marked parts in this book:

This is a warning!
You should pay attention to a warning, as otherwise data loss might occur.

This is a note!
A note will point you to common mistakes and things that might not be obvious.

This is a tip!
Tips will be helpful for your everyday work using Wireshark.

xi
 Preface

5. Where to get the latest copy of this

document?
The latest copy of this documentation can always be found at: http:/ / www.wireshark.org/ docs/
#usersguide.

xii
 Preface

6. Providing feedback about this document

Should you have any feedback about this document, please send them to the authors through wireshark-
dev[AT]wireshark.org.

xiii
Preface

xiv
Chapter 1. Introduction
1.1. What is Wireshark?
Wireshark is a network packet analyzer. A network packet analyzer will try to capture network packets
and tries to display that packet data as detailed as possible.

You could think of a network packet analyzer as a measuring device used to examine what's going on
inside a network cable, just like a voltmeter is used by an electrician to examine what's going on inside
an electric cable (but at a higher level, of course).

In the past, such tools were either very expensive, proprietary, or both. However, with the advent of
Wireshark, all that has changed.

Wireshark is perhaps one of the best open source packet analyzers available today.

1.1.1. Some intended purposes

Here are some examples people use Wireshark for:

• network administrators use it to troubleshoot network problems

• network security engineers use it to examine security problems

• developers use it to debug protocol implementations

• people use it to learn network protocol internals

Beside these examples, Wireshark can be helpful in many other situations too.

1.1.2. Features
The following are some of the many features Wireshark provides:

• Available for UNIX and Windows.

• Capture live packet data from a network interface.

• Display packets with very detailed protocol information.

• Open and Save packet data captured.

• Import and Export packet data from and to a lot of other capture programs.

• Filter packets on many criteria.

• Search for packets on many criteria.

• Colorize packet display based on filters.

• Create various statistics.

• ... and a lot more!

1
 Introduction

However, to really appreciate its power, you have to start using it.

Figure 1.1, “ Wireshark captures packets and allows you to examine their content. ” shows Wireshark
having captured some packets and waiting for you to examine them.

Figure 1.1. Wireshark captures packets and allows you to examine their content.

1.1.3. Live capture from many different network media

Wireshark can capture traffic from many different network media types - and despite it's name including
wireless LAN as well. Which media types are supported, depends on many things like the operating sys-
tem you are using. An overview of the supported media types can be found at: http://wiki.wireshark.org/
CaptureSetup/NetworkMedia.

1.1.4. Import files from many other capture programs

Wireshark can open packets captured from a large number of other capture programs. For a list of input
formats see Section 5.2.2, “Input File Formats”.

1.1.5. Export files for many other capture programs

Wireshark can save packets captured in a large number of formats of other capture programs. For a list
of output formats see Section 5.3.2, “Output File Formats”.

2
 Introduction

1.1.6. Many protocol decoders

There are protocol decoders (or dissectors, as they are known in Wireshark) for a great many protocols:
see Appendix B, Protocols and Protocol Fields.

1.1.7. Open Source Software

Wireshark is an open source software project, and is released under the GNU General Public Licence
(GPL). You can freely use Wireshark on any number of computers you like, without worrying about li-
cense keys or fees or such. In addition, all source code is freely available under the GPL. Because of
that, it is very easy for people to add new protocols to Wireshark, either as plugins, or built into the
source, and they often do!

1.1.8. What Wireshark is not

Here are some things Wireshark does not provide:

• Wireshark isn't an intrusion detection system. It will not warn you when someone does strange
things on your network that he/she isn't allowed to do. However, if strange things happen, Wireshark
might help you figure out what is really going on.

• Wireshark will not manipulate things on the network, it will only "measure" things from it. Wire-
shark doesn't send packets on the network or do other active things (except for name resolutions, but
even that can be disabled).

3
 Introduction

1.2. System Requirements

What you'll need to get Wireshark up and running ...

1.2.1. General Remarks

• The values below are the minimum requirements and only "rules of thumb" for use on a moderately
used network

• Working with a busy network can easily produce huge memory and disk space usage! For example:
Capturing on a fully saturated 100MBit/s Ethernet will produce ~ 750MBytes/min! Having a fast
processor, lots of memory and disk space is a good idea here.

• If Wireshark is running out of memory it crashes, see: http:/ / wiki.wireshark.org/ KnownBugs/

OutOfMemory for details and workarounds

• Wireshark won't benefit much from Multiprocessor/Hyperthread systems (except perhaps during an
"Update list of packets in real time" capture, where capturing traffic runs in one process and dissect-
ing and displaying packets runs in another process, and the two processes could run on two pro-
cessors).

1.2.2. Microsoft Windows

• Windows 2000, XP Home, XP Pro, XP Tablet PC, XP Media Center or Server 2003 (XP Pro recom-
mended)

• 32-bit Pentium or alike (recommended: 400MHz or greater), 64-bit processors in WoW64 emula-
tion, see remarks below

• 128MB RAM system memory (recommended: 256MBytes or greater)

• 60MB available disk space (plus size of user's capture files, e.g. 100MB extra)

• 800*600 (1280*1024 or higher recommended) resolution with at least 256 colors

• A supported network card for capturing:

• Ethernet: any card supported by Windows should do

• WLAN: see the MicroLogix support list, no capturing of 802.11 headers and non-data frames

• Other media: See http://wiki.wireshark.org/CaptureSetup/NetworkMedia

Remarks:

• Windows Vista should work, but as it's still beta you might encounter new bugs

• Windows 95, 98, ME and NT won't work with Wireshark. The last known version to work was Eth-
ereal 0.99.0 (which includes WinPcap 3.1). The libraries Wireshark depends on are no longer sup-
porting these systems. BTW: Microsoft no longer supports 98/ME since July 11, 2006!

4
 Introduction

• Windows CE and the embedded (NT/XP) versions are not supported!

• 64-bit processors run Wireshark in 32 bit emulation (called WoW64), at least WinPcap 4.0 beta 1 is
required for that

• Multi monitor setups are supported but may behave a bit strangely

1.2.3. Unix / Linux

Wireshark currently runs on most UNIX platforms. The system requirements should be comparable to
the Windows values listed above.

Binary packages are available for at least the following platforms:

• Apple Mac OS X

• Debian GNU/Linux

• FreeBSD

• Gentoo Linux

• HP-UX

• Mandriva Linux

• NetBSD

• OpenPKG

• Red Hat Fedora/Enterprise Linux

• rPath Linux

• Sun Solaris/i386

• Sun Solaris/Sparc

If a binary package is not available for your platform, you should download the source and try to build
it. Please report your experiences to wireshark-dev[AT]wireshark.org .

5
 Introduction

1.3. Where to get Wireshark?

You can get the latest copy of the program from the Wireshark website: ht-
tp://www.wireshark.org/download.html. The website allows you to choose from among several mirrors
for downloading.

A new Wireshark version will typically become available every 4-8 weeks.

If you want to be notified about new Wireshark releases, you should subscribe to the wireshark-an-
nounce mailing list. You will find more details in Section 1.6.4, “Mailing Lists”.

6
 Introduction

1.4. A brief history of Wireshark

In late 1997, Gerald Combs needed a tool for tracking down networking problems and wanted to learn
more about networking, so he started writing Ethereal (the former name of the Wireshark project) as a
way to solve both problems.

Ethereal was initially released, after several pauses in development, in July 1998 as version 0.2.0. With-
in days, patches, bug reports, and words of encouragement started arriving, so Ethereal was on its way to
success.

Not long after that Gilbert Ramirez saw its potential and contributed a low-level dissector to it.

In October, 1998, Guy Harris of Network Appliance was looking for something better than tcpview, so
he started applying patches and contributing dissectors to Ethereal.

In late 1998, Richard Sharpe, who was giving TCP/IP courses, saw its potential on such courses, and
started looking at it to see if it supported the protocols he needed. While it didn't at that point, new pro-
tocols could be easily added. So he started contributing dissectors and contributing patches.

The list of people who have contributed to Ethereal has become very long since then, and almost all of
them started with a protocol that they needed that Ethereal did not already handle. So they copied an ex-
isting dissector and contributed the code back to the team.

In 2006 the project moved house and re-emerged under a new name: Wireshark.

7
 Introduction

1.5. Development and maintenance of

Wireshark
Wireshark was initially developed by Gerald Combs. Ongoing development and maintenance of Wire-
shark is handled by the Wireshark team, a loose group of individuals who fix bugs and provide new
functionality.

There have also been a large number of people who have contributed protocol dissectors to Wireshark,
and it is expected that this will continue. You can find a list of the people who have contributed code to
Wireshark by checking the about dialog box of Wireshark, or at the authors page on the Wireshark web
site.

Wireshark is an open source software project, and is released under the GNU General Public Licence
(GPL). All source code is freely available under the GPL. You are welcome to modify Wireshark to suit
your own needs, and it would be appreciated if you contribute your improvements back to the Wireshark
team.

You gain three benefits by contributing your improvements back to the community:

• Other people who find your contributions useful will appreciate them, and you will know that you
have helped people in the same way that the developers of Wireshark have helped people.

• The developers of Wireshark might improve your changes even more, as there's always room for im-
provements. Or they may implement some advanced things on top of your code, which can be useful
for yourself too.

• The maintainers and developers of Wireshark will maintain your code as well, fixing it when API
changes or other changes are made, and generally keeping it in tune with what is happening with
Wireshark. So if Wireshark is updated (which is done often), you can get a new Wireshark version
from the website and your changes will already be included without any effort for you.

The Wireshark source code and binary kits for some platforms are all available on the download page of
the Wireshark website: http://www.wireshark.org/download.html.

8
 Introduction

1.6. Reporting problems and getting help

If you have problems, or need help with Wireshark, there are several places that may be of interest to
you (well, beside this guide of course).

1.6.1. Website
You will find lots of useful information on the Wireshark homepage at http://www.wireshark.org.

1.6.2. Wiki
The Wireshark Wiki at http://wiki.wireshark.org provides a wide range of information related to Wire-
shark and packet capturing in general. You will find a lot of information not part of this user's guide. For
example, there is an explanation how to capture on a switched network, an ongoing effort to build a pro-
tocol reference and a lot more.

And best of all, if you would like to contribute your knowledge on a specific topic (maybe a network
protocol you know well), you can edit the wiki pages by simply using your web browser.

1.6.3. FAQ
The "Frequently Asked Questions" will list often asked questions and the corresponding answers.

Read the FAQ!

Before sending any mail to the mailing lists below, be sure to read the FAQ, as it will often
answer the question(s) you might have. This will save yourself and others a lot of time
(keep in mind that a lot of people are subscribed to the mailing lists).

You will find the FAQ inside Wireshark by clicking the menu item Help/Contents and selecting the
FAQ page in the upcoming dialog.

An online version is available at the Wireshark website: http://www.wireshark.org/faq.html. You might

prefer this online version, as it's typically more up to date and the HTML format is easier to use.

1.6.4. Mailing Lists

There are several mailing lists of specific Wireshark topics available:

wireshark-announce This mailing list will inform you about new program releases, which usu-
ally appear about every 4-8 weeks.

wireshark-users This list is for users of Wireshark. People post questions about building
and using Wireshark, others (hopefully) provide answers.

wireshark-dev This list is for Wireshark developers. If you want to start developing a pro-
tocol dissector, join this list.

You can subscribe to each of these lists from the Wireshark web site: http://www.wireshark.org. Simply
select the mailing lists link on the left hand side of the site. The lists are archived at the Wireshark web
site as well.

9
 Introduction

Tip!
You can search in the list archives to see if someone asked the same question some time
before and maybe already got an answer. That way you don't have to wait until someone
answers your question.

1.6.5. Reporting Problems

Note!
Before reporting any problems, please make sure you have installed the latest version of
Wireshark.

When reporting problems with Wireshark, it is helpful if you supply the following information:

1. The version number of Wireshark and the dependent libraries linked with it, eg GTK+, etc. You
can obtain this with the command wireshark -v.

2. Information about the platform you run Wireshark on.

3. A detailed description of your problem.

4. If you get an error/warning message, copy the text of that message (and also a few lines before and
after it, if there are some), so others may find the place where things go wrong. Please don't give
something like: "I get a warning while doing x" as this won't give a good idea where to look at.

Don't send large files!

Do not send large files (>100KB) to the mailing lists, just place a note that further data is
available on request. Large files will only annoy a lot of people on the list who are not in-
terested in your specific problem. If required, you will be asked for further data by the per-
sons who really can help you.

Don't send confidential information!

If you send captured data to the mailing lists, be sure they don't contain any sensitive or
confidential information like passwords or such.

1.6.6. Reporting Crashes on UNIX/Linux platforms

When reporting crashes with Wireshark, it is helpful if you supply the traceback information (besides
the information mentioned in "Reporting Problems").

You can obtain this traceback information with the following commands:

$ gdb `whereis wireshark | cut -f2 -d: | cut -d' ' -f2` core >& bt.txt
backtrace
^D
$

10
 Introduction

Note
Type the characters in the first line verbatim! Those are back-tics there!

Note
backtrace is a gdb command. You should enter it verbatim after the first line shown above,
but it will not be echoed. The ^D (Control-D, that is, press the Control key and the D key
together) will cause gdb to exit. This will leave you with a file called bt.txt in the cur-
rent directory. Include the file with your bug report.

Note
If you do not have gdb available, you will have to check out your operating system's de-
bugger.

You should mail the traceback to the wireshark-dev[AT]wireshark.org mailing list.

1.6.7. Reporting Crashes on Windows platforms

The Windows distributions don't contain the symbol files (.pdb), because they are very large. For this
reason it's not possible to create a meaningful backtrace file from it. You should report your crash just
like other problems, using the mechanism described above.

11
Introduction

12
Chapter 2. Building and Installing
Wireshark
2.1. Introduction
As with all things, there must be a beginning, and so it is with Wireshark. To use Wireshark, you must:

• Obtain a binary package for your operating system, or

• Obtain the source and build Wireshark for your operating system.

Currently, only two or three Linux distributions ship Wireshark, and they are commonly shipping an
out-of-date version. No other versions of UNIX ship Wireshark so far, and Microsoft does not ship it
with any version of Windows. For that reason, you will need to know where to get the latest version of
Wireshark and how to install it.

This chapter shows you how to obtain source and binary packages, and how to build Wireshark from
source, should you choose to do so.

The following are the general steps you would use:

1. Download the relevant package for your needs, e.g. source or binary distribution.

2. Build the source into a binary, if you have downloaded the source.

This may involve building and/or installing other necessary packages.

3. Install the binaries into their final destinations.

13
 Building and Installing Wireshark

2.2. Obtaining the source and binary

distributions
You can obtain both source and binary distributions from the Wireshark web site: ht-
tp://www.wireshark.org. Simply select the download link, and then select either the source package or
binary package of your choice from the mirror site closest to you.

Download all required files!

In general, unless you have already downloaded Wireshark before, you will most likely
need to download several source packages if you are building Wireshark from source. This
is covered in more detail below.

Once you have downloaded the relevant files, you can go on to the next step.

Note!
While you will find a number of binary packages available on the Wireshark web site, you
might not find one for your platform, and they often tend to be several versions behind the
current released version, as they are contributed by people who have the platforms they are
built for.

For this reason, you might want to pull down the source distribution and build it, as the
process is relatively simple.

14
 Building and Installing Wireshark

2.3. Before you build Wireshark under UNIX

Before you build Wireshark from sources, or install a binary package, you must ensure that you have the
following other packages installed:

• GTK+, The GIMP Tool Kit.

You will also need Glib. Both can be obtained from www.gtk.org

• libpcap, the packet capture software that Wireshark uses.

You can obtain libpcap from www.tcpdump.org

Depending on your system, you may be able to install these from binaries, e.g. RPMs, or you may need
to obtain them in source code form and build them.

If you have downloaded the source for GTK+, the instructions shown in Example 2.1, “Building GTK+
from source” may provide some help in building it:

Example 2.1. Building GTK+ from source

gzip -dc gtk+-1.2.10.tar.gz | tar xvf -

<much output removed>
cd gtk+-1.2.10
./configure
<much output removed>
make
<much output removed>
make install
<much output removed>

Note!
You may need to change the version number of gtk+ in Example 2.1, “Building GTK+
from source” to match the version of GTK+ you have downloaded. The directory you
change to will change if the version of GTK+ changes, and in all cases, tar xvf - will show
you the name of the directory you should change to.

Note!
If you use Linux, or have GNU tar installed, you can use tar zxvf gtk+-1.2.10.tar.gz. It is
also possible to use gunzip -c or gzcat rather than gzip -dc on many UNIX systems.

Note!
If you downloaded gtk+ or any other tar file using Windows, you may find your file called
gtk+-1_2_8_tar.gz.

15
 Building and Installing Wireshark

You should consult the GTK+ web site if any errors occur in carrying out the instructions in Ex-
ample 2.1, “Building GTK+ from source”.

If you have downloaded the source to libpcap, the general instructions shown in Example 2.2, “Building
and installing libpcap” will assist in building it. Also, if your operating system does not support tcp-
dump, you might also want to download it from the tcpdump web site and install it.

Example 2.2. Building and installing libpcap

gzip -dc libpcap-0.9.4.tar.Z | tar xvf -

<much output removed>
cd libpcap-0.9.4
./configure
<much output removed>
make
<much output removed>
make install
<much output removed>

Note!
The directory you should change to will depend on the version of libpcap you have down-
loaded. In all cases, tar xvf - will show you the name of the directory that has been un-
packed.

Under RedHat 6.x and beyond (and distributions based on it, like Mandrake) you can simply install each
of the packages you need from RPMs. Most Linux systems will install GTK+ and GLib in any case,
however, you will probably need to install the devel versions of each of these packages. The commands
shown in Example 2.3, “ Installing required RPMs under RedHat Linux 6.2 and beyond ” will install all
the needed RPMs if they are not already installed.

Example 2.3. Installing required RPMs under RedHat Linux 6.2 and beyond

cd /mnt/cdrom/RedHat/RPMS
rpm -ivh glib-1.2.6-3.i386.rpm
rpm -ivh glib-devel-1.2.6-3.i386.rpm
rpm -ivh gtk+-1.2.6-7.i386.rpm
rpm -ivh gtk+-devel-1.2.6-7.i386.rpm
rpm -ivh libpcap-0.4-19.i386.rpm

Note
If you are using a version of RedHat later than 6.2, the required RPMs have most likely
changed. Simply use the correct RPMs from your distribution.

Under Debian you can install Wireshark using apt-get. apt-get will handle any dependency issues for

16
 Building and Installing Wireshark

you. Example 2.4, “Installing debs under Debian” shows how to do this.

Example 2.4. Installing debs under Debian

apt-get install wireshark-dev

17
 Building and Installing Wireshark

2.4. Building Wireshark from source under

UNIX
Use the following general steps if you are building Wireshark from source under a UNIX operating sys-
tem:

1. Unpack the source from its gzip'd tar file. If you are using Linux, or your version of UNIX uses
GNU tar, you can use the following command:

tar zxvf wireshark-0.99.5-tar.gz

For other versions of UNIX, You will want to use the following commands:

gzip -d wireshark-0.99.5-tar.gz
tar xvf wireshark-0.99.5-tar

Note!
The pipeline gzip -dc wireshark-0.99.5-tar.gz | tar xvf - will work here as well.

Note!
If you have downloaded the Wireshark tarball under Windows, you may find that
your browser has created a file with underscores rather than periods in its file name.

2. Change directory to the Wireshark source directory.

3. Configure your source so it will build correctly for your version of UNIX. You can do this with the
following command:

./configure

If this step fails, you will have to rectify the problems and rerun configure. Troubleshooting hints
are provided in Section 2.6, “Troubleshooting during the install on Unix”.

4. Build the sources into a binary, with the make command. For example:

make

5. Install the software in its final destination, using the command:

make install

18
 Building and Installing Wireshark

Once you have installed Wireshark with make install above, you should be able to run it by entering
wireshark.

19
 Building and Installing Wireshark

2.5. Installing the binaries under UNIX

In general, installing the binary under your version of UNIX will be specific to the installation methods
used with your version of UNIX. For example, under AIX, you would use smit to install the Wireshark
binary package, while under Tru64 UNIX (formerly Digital UNIX) you would use setld.

2.5.1. Installing from rpm's under RedHat and alike

Use the following command to install the Wireshark RPM that you have downloaded from the Wire-
shark web site:

rpm -ivh wireshark-0.99.5.i386.rpm

If the above step fails because of missing dependencies, install the dependencies first, and then retry the
step above. See Example 2.3, “ Installing required RPMs under RedHat Linux 6.2 and beyond ” for in-
formation on what RPMs you will need to have installed.

2.5.2. Installing from deb's under Debian

Use the following command to install Wireshark under Debian:

apt-get install wireshark

apt-get should take care of all of the dependency issues for you.

2.5.3. Installing from portage under Gentoo Linux

Use the following command to install Wireshark under Gentoo Linux with all of the extra features:

USE="adns gtk ipv6 portaudio snmp ssl kerberos threads selinux" emerge wireshark

2.5.4. Installing from packages under FreeBSD

Use the following command to install Wireshark under FreeBSD:

pkg_add -r wireshark

pkg_add should take care of all of the dependency issues for you.

20
 Building and Installing Wireshark

2.6. Troubleshooting during the install on Unix

A number of errors can occur during the installation process. Some hints on solving these are provided
here.

If the configure stage fails, you will need to find out why. You can check the file config.log in the
source directory to find out what failed. The last few lines of this file should help in determining the
problem.

The standard problems are that you do not have GTK+ on your system, or you do not have a recent
enough version of GTK+. The configure will also fail if you do not have libpcap (at least the required
include files) on your system.

Another common problem is for the final compile and link stage to terminate with a complaint of: Out-
put too long. This is likely to be caused by an antiquated sed (such as the one shipped with Solaris).
Since sed is used by the libtool script to construct the final link command, this leads to mysterious prob-
lems. This can be resolved by downloading a recent version of sed from http://directory.fsf.org/GNU/
sed.html.

If you cannot determine what the problems are, send mail to the wireshark-dev mailing list explaining
your problem, and including the output from config.log and anything else you think is relevant, like
a trace of the make stage.

21
 Building and Installing Wireshark

2.7. Building from source under Windows

It is recommended to use the binary installer for Windows, until you want to start developing Wireshark
on the Windows platform.

For further information how to build Wireshark for Windows from the sources, have a look at the Devel-
opment Wiki: http://wiki.wireshark.org/Development for the latest available development documenta-
tion.

22
 Building and Installing Wireshark

2.8. Installing Wireshark under Windows

In this section we explore installing Wireshark under Windows from the binary packages.

2.8.1. Install Wireshark

You may acquire a binary installer of Wireshark named something like: wireshark-
setup-x.y.z.exe.

Simply download the Wireshark installer from: http://www.wireshark.org/download.html#releases and

execute it.

Note!
The WinPcap installer has become part of the main Wireshark installer, so you don't
need to download and install two separate packages

2.8.1.1. Command line options

You can simply start the Wireshark installer without any command line parameters, it will show you the
usual interactive installer.

There are some command line parameters available:

• /NCRC disables the CRC check

• /S runs the installer or uninstaller silently with default values. Please note: The silent installer won't
install WinPCap!

• /desktopicon installation of the desktop icon, =yes - force installation, =no - don't install, otherwise
use defaults / user settings. This option can be useful for a silent installer.

• /quicklaunchicon installation of the quick launch icon, =yes - force installation, =no - don't install,
otherwise use defaults / user settings.

• /D sets the default installation directory ($INSTDIR), overriding InstallDir and InstallDirRegKey. It
must be the last parameter used in the command line and must not contain any quotes, even if the
path contains spaces.

Example:

wireshark-setup-0.99.5.exe /NCRC /S /desktopicon=yes

/quicklaunchicon=no /D=C:\Program Files\Foo

2.8.1.2. Components
Beside the usual installer options like where to install the program, there are several optional compon-
ents.

23
 Building and Installing Wireshark

Tip!
If you are unsure which settings to select, just keep the default settings.

The Components (both Wireshark GTK1 and 2 cannot be installed at the same time):

• Wireshark GTK1 - Wireshark is a GUI network protocol analyzer.

• Wireshark GTK2 - Wireshark is a GUI network protocol analyzer (using the modern GTK2 GUI
toolkit, recommended).

• GTK-Wimp - GTKWimp is the GTK2 windows impersonator (native Win32 look and feel, recom-
mended).

• TShark - TShark is a command-line based network protocol analyzer.

The dissection extensions for Wireshark and TShark:

• Dissector Plugins - Plugins with some extended dissections.

• Tree Statistics Plugins - Plugins with some extended statistics.

• Mate - Meta Analysis and Tracing Engine (experimental) - user configurable extension(s) of the
display filter engine, see http://wiki.wireshark.org/Mate for details.

• Lua Plugin (experimental) - a language for prototyping and scripting, see ht-
tp://wiki.wireshark.org/Lua for details.

• SNMP MIBs - SNMP MIBs for a more detailed SNMP dissection.

The Tools:

• Editcap - Editcap is a program that reads a capture file and writes some or all of the packets into an-
other capture file.

• Text2Pcap - Text2pcap is a program that reads in an ASCII hex dump and writes the data into a
libpcap-style capture file.

• Mergecap - Mergecap is a program that combines multiple saved capture files into a single output
file.

• Capinfos - Capinfos is a program that provides information on capture files.

The Additional Tasks:

• Start Menu Shortcuts - add some start menu shortcuts.

• Desktop Icon - add an Wireshark icon to the desktop.

• Quick Launch Icon - add an Wireshark icon to the Explorer quick launch toolbar.

• Associate file extensions to Wireshark - Associate standard network trace files to Wireshark.

24
 Building and Installing Wireshark

2.8.2. Install WinPcap

Note!
As mentioned above, the Wireshark installer takes care of the installation of Win-
Pcap, so usually you don't have to worry about WinPcap at all!

If you do not have WinPcap installed you will be able to open saved capture files, but you will not be
able to capture live network traffic.

While running, the Wireshark installer detects which WinPcap version is currently installed and will in-
stall WinPcap, if none or an older version is detected.

More WinPcap info:

• Wireshark related: http://wiki.wireshark.org/WinPcap

• General WinPcap info: http://www.winpcap.org

2.8.2.1. Manual WinPcap Installation

The following is only necessary if you want to try a different version than the one included in the Wire-
shark installer, e.g. because a new WinPcap (beta) version was released.

Additional WinPcap versions (including newer alpha or beta releases) can be downloaded from the fol-
lowing locations:

• The main WinPcap site: http://www.winpcap.org

• The Wiretapped.net mirror: http://www.mirrors.wiretapped.net/security/packet-capture/winpcap

At the download page you will find a single installer exe called something like "auto-installer", which
can be installed under various Windows systems, including 9x/Me/NT4.0/2000/XP.

2.8.3. Update Wireshark

From time to time you may want to update your installed Wireshark to a more recent version. If you join
Wireshark's announce mailing list, you will be informed about new Wireshark versions, see Sec-
tion 1.6.4, “Mailing Lists” for details how to subscribe to this list.

New versions of Wireshark usually become available every 4-8 weeks. Updating Wireshark is done the
same way as installing it, you simply download and start the installer exe. A reboot is usually not re-
quired and all your personal settings remain unchanged.

2.8.4. Update WinPcap

New versions of WinPcap are less frequently available, maybe only once in a year. You will find Win-
Pcap update instructions where you can download new WinPcap versions. Usually you have to reboot
the machine after installing a new WinPcap version.

25
 Building and Installing Wireshark

Warning!
If you have an older version of WinPcap installed, you must un-install it before installing
the current version. Recent versions of the WinPcap installer will take care of this.

2.8.5. Uninstall Wireshark

You can uninstall Wireshark the usual way, using the "Add or Remove Programs" option inside the
Control Panel. Select the "Wireshark" entry to start the uninstallation procedure.

The Wireshark uninstaller will provide several options which things to be uninstalled, the default is to
remove the core components but keep the personal settings, WinPcap and alike.

WinPcap won't be uninstalled by default, as other programs than Wireshark may use it as well.

2.8.6. Uninstall WinPcap

You can uninstall WinPcap independently of Wireshark, using the "WinPcap" entry in the "Add or Re-
move Programs" of the Control Panel.

Note!
After uninstallation of WinPcap you can't capture anything with Wireshark.

It might be a good idea to reboot Windows afterwards.

26
Building and Installing Wireshark

27
Chapter 3. User Interface
3.1. Introduction
By now you have installed Wireshark and are most likely keen to get started capturing your first packets.
In the next chapters we will explore:

• How the Wireshark user interface works

• How to capture packets in Wireshark

• How to view packets in Wireshark

• How to filter packets in Wireshark

• ... and many other things!

28
 User Interface

3.2. Start Wireshark

You can start Wireshark from your shell or window manager.

Tip!
When starting Wireshark it's possible to specify optional settings using the command line.
See Section 9.2, “Start Wireshark from the command line” for details.

Note!
In the following chapters, a lot of screenshots from Wireshark will be shown. As Wire-
shark runs on many different platforms and there are different versions of the underlying
GUI toolkit (GTK 1.x / 2.x) used, your screen might look different from the provided
screenshots. But as there are no real differences in functionality, these screenshots should
still be well understandable.

29
 User Interface

3.3. The Main window

Lets look at Wireshark's user interface. Figure 3.1, “The Main window” shows Wireshark as you would
usually see it after some packets captured or loaded (how to do this will be described later).

Figure 3.1. The Main window

Wireshark's main window consist of parts that are commonly known from many other GUI programs.

1. The menu (see Section 3.4, “The Menu”) is used to start actions.

2. The main toolbar (see Section 3.13, “The "Main" toolbar”) provides quick access to frequently
used items from the menu.

3. The filter toolbar (see Section 3.14, “The "Filter" toolbar”) provides a way to directly manipulate
the currently used display filter (see Section 6.3, “Filtering packets while viewing”).

4. The packet list pane (see Section 3.15, “The "Packet List" pane”) displays a summary of each pack-
et captured. By clicking on packets in this pane you control what is displayed in the other two
panes.

5. The packet details pane (see Section 3.16, “The "Packet Details" pane”) displays the packet selec-
ted in the packet list pane in more detail.

30
 User Interface

6. The packet bytes pane (see Section 3.17, “The "Packet Bytes" pane”) displays the data from the
packet selected in the packet list pane, and highlights the field selected in the packet details pane.

7. The statusbar (see Section 3.18, “The Statusbar”) shows some detailed information about the cur-
rent program state and the captured data.

Tip!
The layout of the main window can be customized by changing preference settings. See
Section 9.5, “Preferences” for details!

3.3.1. Main Window Navigation

Packet list and detail navigation can be done entirely from the keyboard. Table 3.1, “Keyboard Naviga-
tion” shows a list of keystrokes that will let you quickly move around a capture file. See Table 3.5, “Go
menu items” for additional navigation keystrokes.

Table 3.1. Keyboard Navigation

Accelerator Description
Tab, Shift+Tab
Move between screen elements, e.g. from the toolbars to the packet list to the packet
detail.
Down
Move to the next packet or detail item.
Up
Move to the previous packet or detail item.
Ctrl-Down, F8
Move to the next packet, even if the packet list isn't focused.
Ctrl-Up, F7
Move to the previous packet, even if the packet list isn't focused.
Left
In the packet detail, closes the selected tree item. If it's already closed, jumps to the
parent node.
Right
In the packet detail, opens the selected tree item.
Backspace
In the packet detail, jumps to the parent node.
Return, Enter
In the packet detail, toggles the selected tree item.

Additionally, typing anywhere in the main window will start filling in a display filter.

31
 User Interface

3.4. The Menu

The Wireshark menu sits on top of the Wireshark window. An example is shown in Figure 3.2, “The
Menu”.

Note!
Menu items will be greyed out if the corresponding feature isn't available. For example,
you cannot save a capture file if you didn't capture or load any data before.

Figure 3.2. The Menu

It contains the following items:

File This menu contains items to open and merge capture files, save / print / export capture
files in whole or in part, and to quit from Wireshark. See Section 3.5, “The "File"
menu”.

Edit This menu contains items to find a packet, time reference or mark one or more packets,
set your preferences, (cut, copy, and paste are not presently implemented). See Sec-
tion 3.6, “The "Edit" menu”.

View This menu controls the display of the captured data, including the colorization of pack-
ets, zooming the font, show a packet in a separate window, expand and collapse trees
in packet details, .... See Section 3.7, “The "View" menu”.

Go This menu contains items to go to a specific packet. See Section 3.8, “The "Go"
menu”.

Capture This menu allows you to start and stop captures and to edit capture filters. See Sec-
tion 3.9, “The "Capture" menu”.

Analyze This menu contains items to manipulate display filters, enable or disable the dissection
of protocols, configure user specified decodes and follow a TCP stream. See Sec-
tion 3.10, “The "Analyze" menu”.

Statistics This menu contains menu-items to display various statistic windows, including a sum-
mary of the packets that have been captured, display protocol hierarchy statistics and
much more. See Section 3.11, “The "Statistics" menu”.

Help This menu contains items to help the user, like access to some basic help, a list of the
supported protocols, manual pages, online access to some of the webpages, and the
usual about dialog. See Section 3.12, “The "Help" menu”.

Each of these menu items is described in more detail in the sections that follow.

Tip!
You can access menu items directly or by pressing the corresponding accelerator keys,
which are shown at the right side of the menu. For example, you can press the Control (or

32
 User Interface

Strg in German) and the K keys together to open the capture dialog.

33
 User Interface

3.5. The "File" menu

The Wireshark file menu contains the fields shown in Table 3.2, “File menu items”.

Figure 3.3. The "File" Menu

Table 3.2. File menu items

Menu Item Accelerator Description
Open... Ctrl+O
This menu item brings up the file open dialog box that allows you
to load a capture file for viewing. It is discussed in more detail in
Section 5.2.1, “The "Open Capture File" dialog box”.
Open Recent
This menu item shows a submenu containing the recently opened
capture files. Clicking on one of the submenu items will open the
corresponding capture file directly.
Merge...
This menu item brings up the merge file dialog box that allows
you to merge a capture file into the currently loaded one. It is dis-
cussed in more detail in Section 5.4, “Merging capture files”.

34
 User Interface

Menu Item Accelerator Description

Close Ctrl+W
This menu item closes the current capture. If you haven't saved
the capture, you will be asked to do so first (this can be disabled
by a preference setting).
------
Save Ctrl+S
This menu item saves the current capture. If you have not set a
default capture file name (perhaps with the -w <capfile> option),
Wireshark pops up the Save Capture File As dialog box (which is
discussed further in Section 5.3.1, “The "Save Capture File As"
dialog box”).

Note!
If you have already saved the current capture, this
menu item will be greyed out.

Note!
You cannot save a live capture while it is in pro-
gress. You must stop the capture in order to save.

Save As... Shift+Ctrl+S

This menu item allows you to save the current capture file to
whatever file you would like. It pops up the Save Capture File As
dialog box (which is discussed further in Section 5.3.1, “The
"Save Capture File As" dialog box”).
------
File Set > List
Files This menu item allows you to show a list of files in a file set. It
pops up the Wireshark List File Set dialog box (which is dis-
cussed further in Section 5.5, “File Sets”).
File Set > Next
File If the currently loaded file is part of a file set, jump to the next
file in the set. If it isn't part of a file set or just the last file in that
set, this item is greyed out.
File Set > Pre-
vious File If the currently loaded file is part of a file set, jump to the previ-
ous file in the set. If it isn't part of a file set or just the first file in
that set, this item is greyed out.
------
Export > as
"Plain Text" This menu item allows you to export all, or some, of the packets
file... in the capture file to a plain ASCII text file. It pops up the Wire-
shark Export dialog box (which is discussed further in Sec-
tion 5.6.1, “The "Export as Plain Text File" dialog box”).
Export > as
"PostScript" This menu item allows you to export the (or some) of the packets
file... in the capture file to a PostScript file. It pops up the Wireshark
Export dialog box (which is discussed further in Section 5.6.2,
“The "Export as PostScript File" dialog box”).

35
 User Interface

Menu Item Accelerator Description

Export > as
"CSV" This menu item allows you to export the (or some) of the packet
(Comma Sep- summaries in the capture file to a .csv file (e.g. used by spread-
arated Values sheet programs). It pops up the Wireshark Export dialog box
packet sum- (which is discussed further in Section 5.6.3, “The "Export as
mary) file... CSV (Comma Separated Values) File" dialog box”).
Export > as
"PSML" file... This menu item allows you to export the (or some) of the packets
in the capture file to a PSML (packet summary markup language)
XML file. It pops up the Wireshark Export dialog box (which is
discussed further in Section 5.6.4, “The "Export as PSML File"
dialog box”).
Export > as
"PDML" file... This menu item allows you to export the (or some) of the packets
in the capture file to a PDML (packet details markup language)
XML file. It pops up the Wireshark Export dialog box (which is
discussed further in Section 5.6.5, “The "Export as PDML File"
dialog box”).
Export > Selec- Ctrl+H
ted Packet This menu item allows you to export the currently selected bytes
Bytes... in the packet bytes pane to a binary file. It pops up the Wireshark
Export dialog box (which is discussed further in Section 5.6.6,
“The "Export selected packet bytes" dialog box”)
------
Print... Ctrl+P
This menu item allows you to print all (or some of) the packets in
the capture file. It pops up the Wireshark Print dialog box (which
is discussed further in Section 5.7, “Printing packets”).
------
Quit Ctrl+Q
This menu item allows you to quit from Wireshark. Wireshark
will ask to save your capture file if you haven't saved it before
(this can be disabled by a preference setting).

36
 User Interface

3.6. The "Edit" menu

The Wireshark Edit menu contains the fields shown in Table 3.3, “Edit menu items”.

Figure 3.4. The "Edit" Menu

Table 3.3. Edit menu items

Menu Item Accelerator Description
Find Packet... Ctrl+F
This menu item brings up a dialog box that allows you to find a
packet by many criteria. There is further information on finding
packets in Section 6.7, “Finding packets”.
Find Next Ctrl+N
This menu item tries to find the next packet matching the settings
from "Find Packet...".
Find Previous Ctrl+B
This menu item tries to find the previous packet matching the set-
tings from "Find Packet...".
------

37
 User Interface

Menu Item Accelerator Description

Mark Packet Ctrl+M
(toggle) This menu item "marks" the currently selected packet. See Sec-
tion 6.9, “Marking packets” for details.
Find Next Shift+Ctrl+N
Mark Find the next marked packet.
Find Previous Shift+Ctrl+B
Mark Find the previous marked packet.
Mark All Pack-
ets This menu item "marks" all packets.
Unmark All
Packets This menu item "unmarks" all marked packets.
------
Set Time Refer- Ctrl+T
ence (toggle) This menu item set a time reference on the currently selected
packet. See Section 6.10.1, “Packet time referencing” for more
information about the time referenced packets.
Find Next Ref-
erence This menu item tries to find the next time referenced packet.
Find Previous
Reference This menu item tries to find the previous time referenced packet.
------
Preferences... Shift+Ctrl+P
This menu item brings up a dialog box that allows you to set
preferences for many parameters that control Wireshark. You can
also save your preferences so Wireshark will use them the next
time you start it. More detail is provided in Section 9.5,
“Preferences”.

38
 User Interface

3.7. The "View" menu

The Wireshark View menu contains the fields shown in Table 3.4, “View menu items”.

Figure 3.5. The "View" Menu

Table 3.4. View menu items

Menu Item Accelerator Description
Main Toolbar
This menu item hides or shows the main toolbar, see Sec-
tion 3.13, “The "Main" toolbar”.
Filter Toolbar
This menu item hides or shows the filter toolbar, see Sec-
tion 3.14, “The "Filter" toolbar”.
Statusbar
This menu item hides or shows the statusbar, see Section 3.18,
“The Statusbar”.
------
Packet List
This menu item hides or shows the packet list pane, see Sec-

39
 User Interface

Menu Item Accelerator Description

tion 3.15, “The "Packet List" pane”.
Packet Details
This menu item hides or shows the packet details pane, see Sec-
tion 3.16, “The "Packet Details" pane”.
Packet Bytes
This menu item hides or shows the packet bytes pane, see Sec-
tion 3.17, “The "Packet Bytes" pane”.
------
Time Display
Format > Date Selecting this tells Wireshark to display the time stamps in date
and Time of and time of day format, see Section 6.10, “Time display formats
Day: and time references”.
1970-01-01
01:02:03.12345 Note!
6
The fields "Time of Day", "Date and Time of Day",
"Seconds Since Beginning of Capture" and
"Seconds Since Previous Packet" are mutually ex-
clusive.

Time Display
Format > Time Selecting this tells Wireshark to display time stamps in time of
of Day: day format, see Section 6.10, “Time display formats and time ref-
01:02:03.12345 erences”.
6
Time Display
Format > Selecting this tells Wireshark to display time stamps in seconds
Seconds Since since beginning of capture format, see Section 6.10, “Time dis-
Beginning of play formats and time references”.
Capture:
123.123456
Time Display
Format > Selecting this tells Wireshark to display time stamps in seconds
Seconds Since since previous packet format, see Section 6.10, “Time display
Previous Pack- formats and time references”.
et: 1.123456
Time Display
Format > ------
Time Display
Format > Auto- Selecting this tells Wireshark to display time stamps with the pre-
matic (File cision given by the capture file format used, see Section 6.10,
Format Preci- “Time display formats and time references”.
sion)
Note!
The fields "Automatic", "Seconds" and "...seconds"
are mutually exclusive.

Time Display
Format > Selecting this tells Wireshark to display time stamps with a preci-
Seconds: 0 sion of one second, see Section 6.10, “Time display formats and
time references”.

40
 User Interface

Menu Item Accelerator Description

Time Display
Format > Selecting this tells Wireshark to display time stamps with a preci-
...seconds: 0.... sion of one second, decisecond, centisecond, millisecond, micro-
second or nanosecond, see Section 6.10, “Time display formats
and time references”.
Name Resolu-
tion > Resolve This item allows you to trigger a name resolve of the current
Name packet only, see Section 7.6, “Name Resolution”.
Name Resolu-
tion > Enable This item allows you to control whether or not Wireshark trans-
for MAC Layer lates MAC addresses into names, see Section 7.6, “Name Resolu-
tion”.
Name Resolu-
tion > Enable This item allows you to control whether or not Wireshark trans-
for Network lates network addresses into names, see Section 7.6, “Name Res-
Layer olution”.
Name Resolu-
tion > Enable This item allows you to control whether or not Wireshark trans-
for Transport lates transport addresses into names, see Section 7.6, “Name Res-
Layer olution”.
Colorize Packet
List This item allows you to control whether or not Wireshark should
colorize the packet list.

Note!
Enabling colorization will slow down the display of
new packets while capturing / loading capture files.

Auto Scroll in
Live Capture This item allows you to specify that Wireshark should scroll the
packet list pane as new packets come in, so you are always look-
ing at the last packet. If you do not specify this, Wireshark simply
adds new packets onto the end of the list, but does not scroll the
packet list pane.
------
Zoom In Ctrl++
Zoom into the packet data (increase the font size).
Zoom Out Ctrl+-
Zoom out of the packet data (decrease the font size).
Normal Size Ctrl+=
Set zoom level back to 100% (set font size back to normal).
Resize All
Columns Resize all column widths so the content will fit into it.

Note!
Resizing may take a significant amount of time, es-
pecially if a large capture file is loaded.

------
Expand Sub-
This menu item expands the currently selected subtree in the

41
 User Interface

Menu Item Accelerator Description

trees
packet details tree.
Expand All
Wireshark keeps a list of all the protocol subtrees that are expan-
ded, and uses it to ensure that the correct subtrees are expanded
when you display a packet. This menu item expands all subtrees
in all packets in the capture.
Collapse All
This menu item collapses the tree view of all packets in the cap-
ture list.
------
Coloring
Rules... This menu item brings up a dialog box that allows you to color
packets in the packet list pane according to filter expressions you
choose. It can be very useful for spotting certain types of packets,
see Section 9.3, “Packet colorization”.
------
Show Packet in
New Window This menu item brings up the selected packet in a separate win-
dow. The separate window shows only the tree view and byte
view panes.
Reload Ctrl-R
This menu item allows you to reload the current capture file.

42
 User Interface

3.8. The "Go" menu

The Wireshark Go menu contains the fields shown in Table 3.5, “Go menu items”.

Figure 3.6. The "Go" Menu

Table 3.5. Go menu items

Menu Item Accelerator Description
Back Alt+Left
Jump to the recently visited packet in the packet history, much
like the page history in a web browser.
Forward Alt+Right
Jump to the next visited packet in the packet history, much like
the page history in a web browser.
Go to Packet... Ctrl-G
Bring up a dialog box that allows you to specify a packet number,
and then goes to that packet. See Section 6.8, “Go to a specific
packet” for details.
Go to Corres-
ponding Packet Go to the corresponding packet of the currently selected protocol

43
 User Interface

Menu Item Accelerator Description

field. If the selected field doesn't correspond to a packet, this item

is greyed out.
------
Previous Pack- Ctrl+Up
et Move to the previous packet in the list. This can be used to move
to the previous packet even if the packet list doesn't have key-
board focus.
Next Packet Ctrl+Down
Move to the next packet in the list. This can be used to move to
the previous packet even if the packet list doesn't have keyboard
focus.
First Packet
Jump to the first packet of the capture file.
Last Packet
Jump to the last packet of the capture file.

44
 User Interface

3.9. The "Capture" menu

The Wireshark Capture menu contains the fields shown in Table 3.6, “Capture menu items”.

Figure 3.7. The "Capture" Menu

Table 3.6. Capture menu items

Menu Item Accelerator Description
Interfaces...
This menu item brings up a dialog box that shows what's going
on at the network interfaces Wireshark knows of, see Section 4.4,
“The "Capture Interfaces" dialog box”) .
Options... Ctrl+K
This menu item brings up the Capture Options dialog box
(discussed further in Section 4.5, “The "Capture Options" dialog
box”) and allows you to start capturing packets.
Start
Immediately start capturing packets with the same settings than
the last time.

45
 User Interface

Menu Item Accelerator Description

Stop Ctrl+E
This menu item stops the currently running capture, see Sec-
tion 4.9.1, “Stop the running capture”) .
Restart
This menu item stops the currently running capture and starts
again with the same options, this is just for convenience.
Capture Fil-
ters... This menu item brings up a dialog box that allows you to create
and edit capture filters. You can name filters, and you can save
them for future use. More detail on this subject is provided in
Section 6.6, “Defining and saving filters”

46
 User Interface

3.10. The "Analyze" menu

The Wireshark Analyze menu contains the fields shown in Table 3.7, “Analyze menu items”.

Figure 3.8. The "Analyze" Menu

Table 3.7. Analyze menu items

Menu Item Accelerator Description
Display Fil-
ters... This menu item brings up a dialog box that allows you to create
and edit display filters. You can name filters, and you can save
them for future use. More detail on this subject is provided in
Section 6.6, “Defining and saving filters”
Apply as Filter
> ... These menu items will change the current display filter and apply
the changed filter immediately. Depending on the chosen menu
item, the current display filter string will be replaced or appended
to by the selected protocol field in the packet details pane.
Prepare a Fil-
ter > ... These menu items will change the current display filter but won't
apply the changed filter. Depending on the chosen menu item, the

47
 User Interface

Menu Item Accelerator Description

current display filter string will be replaced or appended to by the

selected protocol field in the packet details pane.
Firewall ACL
Rules This allows you to create command-line ACL rules for many dif-
ferent firewall products, including Cisco IOS, Linux Netfilter
(iptables), OpenBSD pf and Windows Firewall (via netsh). Rules
for MAC addresses, IPv4 addresses, TCP and UDP ports, and
IPv4+port combinations are supported.

It is assumed that the rules will be applied to an outside interface.

------
Enabled Proto- Shift+Ctrl+R
cols... This menu item allows the user to enable/disable protocol dis-
sectors, see Section 9.4.1, “The "Enabled Protocols" dialog box”
Decode As...
This menu item allows the user to force Wireshark to decode cer-
tain packets as a particular protocol, see Section 9.4.2, “User Spe-
cified Decodes”
User Specified
Decodes... This menu item allows the user to force Wireshark to decode cer-
tain packets as a particular protocol, see Section 9.4.3, “Show
User Specified Decodes”
------
Follow TCP
Stream This menu item brings up a separate window and displays all the
TCP segments captured that are on the same TCP connection as a
selected packet, see Section 7.2, “Following TCP streams”
Follow SSL
Stream Same functionality as "Follow TCP Stream" but for SSL streams.
XXX - how to provide the SSL keys?
Expert Info
Open a dialog showing some expert information about the cap-
tured packets in a log style display. The amount of information
will depend on the protocol and varies from very detailed to none
existing. This is currently a work in progress. XXX - add a new
section about this and link from here
Expert Info
Composite Same information as in "Expert Info" but trying to group items
together for faster analysis.

48
 User Interface

3.11. The "Statistics" menu

The Wireshark Statistics menu contains the fields shown in Table 3.8, “Statistics menu items”.

Figure 3.9. The "Statistics" Menu

All menu items will bring up a new window showing specific statistical information.

Table 3.8. Statistics menu items

Menu Item Accelerator Description
Summary
Show information about the data captured, see Section 8.2, “The
"Summary" window”.
Protocol Hier-
archy Display a hierarchical tree of protocol statistics, see Section 8.3,
“The "Protocol Hierarchy" window”.
Conversations
Display a list of conversations (traffic between two endpoints),
see Section 8.5.2, “The "Conversations" window”.

49
 User Interface

Menu Item Accelerator Description

Endpoints
Display a list of endpoints (traffic to/from an address), see Sec-
tion 8.4.2, “The "Endpoints" window”.
IO Graphs
Display user specified graphs (e.g. the number of packets in the
course of time), see Section 8.6, “The "IO Graphs" window”.
------
Conversation
List Display a list of conversations, obsoleted by the combined win-
dow of Conversations above, see Section 8.5.3, “The protocol
specific "Conversation List" windows”.
Endpoint List
Display a list of endpoints, obsoleted by the combined window of
Endpoints above, see Section 8.4.3, “The protocol specific "End-
point List" windows”.
Service Re-
sponse Time Display the time between a request and the corresponding re-
sponse, see Section 8.7, “Service Response Time”.
------
ANSI
See Section 8.8, “The protocol specific statistics windows”
GSM
See Section 8.8, “The protocol specific statistics windows”
H.225...
See Section 8.8, “The protocol specific statistics windows”
ISUP Message
Types See Section 8.8, “The protocol specific statistics windows”
MTP3
See Section 8.8, “The protocol specific statistics windows”
RTP
See Section 8.8, “The protocol specific statistics windows”
SCTP
See Section 8.8, “The protocol specific statistics windows”
SIP
See Section 8.8, “The protocol specific statistics windows”
VoIP Calls...
See Section 8.8, “The protocol specific statistics windows”
WAP-WSP...
See Section 8.8, “The protocol specific statistics windows”
------
BOOTP-DHCP
See Section 8.8, “The protocol specific statistics windows”
HTTP
HTTP request/response statistics, see Section 8.8, “The protocol
specific statistics windows”
ISUP Messages
See Section 8.8, “The protocol specific statistics windows”
ONC-RPC Pro-
grams See Section 8.8, “The protocol specific statistics windows”

50
 User Interface

Menu Item Accelerator Description

TCP Stream
Graph See Section 8.8, “The protocol specific statistics windows”

51
 User Interface

3.12. The "Help" menu

The Wireshark Help menu contains the fields shown in Table 3.9, “Help menu items”.

Figure 3.10. The "Help" Menu

Table 3.9. Help menu items

Menu Item Accelerator Description
Contents F1
This menu item brings up a basic help system.
Supported Pro-
tocols This menu item brings up a dialog box showing the supported
protocols and protocol fields.
Manual Pages
> ... This menu item starts a Web browser showing one of the locally
installed html manual pages.
Wireshark On-
line > ... This menu item starts a Web browser showing the chosen
webpage from: http://www.wireshark.org.
------

52
 User Interface

Menu Item Accelerator Description

About Wire-
shark This menu item brings up an information window that provides
some information on Wireshark, such as the plugins, the used
folders, ...

Note!
Calling a Web browser might be unsupported in your version of Wireshark. If this is the
case, the corresponding menu items will be hidden.

Note!
If calling a Web browser fails on your machine, maybe because just nothing happens or the
browser is started but no page is shown, have a look at the web browser setting in the pref-
erences dialog.

53
 User Interface

3.13. The "Main" toolbar

The main toolbar provides quick access to frequently used items from the menu. This toolbar cannot be
customized by the user, but it can be hidden using the View menu, if the space on the screen is needed to
show even more packet data.

As in the menu, only the items useful in the current program state will be available. The others will be
greyed out (e.g. you cannot save a capture file if you haven't loaded one).

Figure 3.11. The "Main" toolbar

Table 3.10. Main toolbar items

Toolbar Toolbar Item Corresponding Description
Icon Menu Item
Interfaces... Capture/Inter-
faces... This item brings up the Capture Interfaces List dialog
box (discussed further in Section 4.3, “Start Captur-
ing”).
Options... Capture/Options...
This item brings up the Capture Options dialog box
(discussed further in Section 4.3, “Start Capturing”)
and allows you to start capturing packets.
Start Capture/Start
This item starts capturing packets with the options
form the last time.
Stop Capture/Stop
This item stops the currently running live capture
process Section 4.3, “Start Capturing”).
Restart Capture/Restart
This item stops the currently running live capture
process and restarts it again, for convenience.
------
Open... File/Open...
This item brings up the file open dialog box that al-
lows you to load a capture file for viewing. It is dis-
cussed in more detail in Section 5.2.1, “The "Open
Capture File" dialog box”.
Save As... File/Save As...
This item allows you to save the current capture file
to whatever file you would like. It pops up the Save
Capture File As dialog box (which is discussed fur-
ther in Section 5.3.1, “The "Save Capture File As"
dialog box”).

Note!
If you currently have a temporary cap-

54
 User Interface

Toolbar Toolbar Item Corresponding Description

Icon Menu Item

ture file, the Save icon will be

shown instead.

Close File/Close
This item closes the current capture. If you have not
saved the capture, you will be asked to save it first.
Reload View/Reload
This item allows you to reload the current capture
file.
Print... File/Print...
This item allows you to print all (or some of) the
packets in the capture file. It pops up the Wireshark
Print dialog box (which is discussed further in Sec-
tion 5.7, “Printing packets”).
------
Find Packet... Edit/Find Packet...
This item brings up a dialog box that allows you to
find a packet. There is further information on finding
packets in Section 6.7, “Finding packets”.
Go Back Go/Go Back
This item jumps back in the packet history.

Go Forward Go/Go Forward

This item jumps forward in the packet history.

Go to Packet... Go/Go to Packet...

This item brings up a dialog box that allows you to
specify a packet number to go to that packet.
Go To First Go/First Packet
Packet This item jumps to the first packet of the capture file.

Go To Last Pack- Go/Last Packet

et This item jumps to the last packet of the capture file.

------
Colorize View/Colorize
Colorize the packet list (or not).

Auto Scroll in View/Auto Scroll

Live Capture in Live Capture Auto scroll packet list while doing a live capture (or
not).
------
Zoom In View/Zoom In
Zoom into the packet data (increase the font size).

Zoom Out View/Zoom Out

Zoom out of the packet data (decrease the font size).

Normal Size View/Normal Size

Set zoom level back to 100%.

55
 User Interface

Toolbar Toolbar Item Corresponding Description

Icon Menu Item
Resize Columns View/Resize
Columns Resize columns, so the content fits into them.

------
Capture Filters... Capture/Capture
Filters... This item brings up a dialog box that allows you to
create and edit capture filters. You can name filters,
and you can save them for future use. More detail on
this subject is provided in Section 6.6, “Defining and
saving filters”.
Display Filters... Analyze/Display
Filters... This item brings up a dialog box that allows you to
create and edit display filters. You can name filters,
and you can save them for future use. More detail on
this subject is provided in Section 6.6, “Defining and
saving filters”.
Coloring Rules... View/Coloring
Rules... This item brings up a dialog box that allows you col-
or packets in the packet list pane according to filter
expressions you choose. It can be very useful for
spotting certain types of packets. More detail on this
subject is provided in Section 9.3, “Packet coloriza-
tion”.
Preferences... Edit/Preferences
This item brings up a dialog box that allows you to
set preferences for many parameters that control
Wireshark. You can also save your preferences so
Wireshark will use them the next time you start it.
More detail is provided in Section 9.5, “Preferences”
------
Help Help/Contents
This item brings up help dialog box.

56
 User Interface

3.14. The "Filter" toolbar

The filter toolbar lets you quickly edit and apply display filters. More information on display filters is
available in Section 6.3, “Filtering packets while viewing”.

Figure 3.12. The "Filter" toolbar

Table 3.11. Filter toolbar items

Toolbar Toolbar Item Description
Icon
Filter:
Brings up the filter construction dialog, described in Figure 6.8, “The
"Capture Filters" and "Display Filters" dialog boxes”.
Filter input
The area to enter or edit a display filter string, see Section 6.4, “Building
display filter expressions” . A syntax check of your filter string is done
while you are typing. The background will turn red if you enter an in-
complete or invalid string, and will become green when you enter a valid
string. You can click on the pull down arrow to select a previously-
entered filter string from a list. The entries in the pull down list will re-
main available even after a program restart.

Note!
After you've changed something in this field, don't forget to
press the Apply button (or the Enter/Return key), to apply
this filter string to the display.

Note!
This field is also where the current filter in effect is dis-
played.

Expression...
The middle button labeled "Add Expression..." opens a dialog box that
lets you edit a display filter from a list of protocol fields, described in
Section 6.5, “The "Filter Expression" dialog box”
Clear
Reset the current display filter and clears the edit area.

Apply
Apply the current value in the edit area as the new display filter.

Note!
Applying a display filter on large capture files might take
quite a long time!

57
 User Interface

Toolbar Toolbar Item Description

Icon

58
 User Interface

3.15. The "Packet List" pane

The packet list pane displays all the packets in the current capture file.

Figure 3.13. The "Packet List" pane

Each line in the packet list corresponds to one packet in the capture file. If you select a line in this pane,
more details will be displayed in the "Packet Details" and "Packet Bytes" panes.

While dissecting a packet, Wireshark will place information from the protocol dissectors into the
columns. As higher level protocols might overwrite information from lower levels, you will typically see
the information from the highest possible level only.

For example, let's look at a packet containing TCP inside IP inside an Ethernet packet. The Ethernet dis-
sector will write its data (such as the Ethernet addresses), the IP dissector will overwrite this by its own
(such as the IP addresses), the TCP dissector will overwrite the IP information, and so on.

There are a lot of different columns available. Which columns are displayed can be selected by prefer-
ence settings, see Section 9.5, “Preferences”.

The default columns will show:

• No. The number of the packet in the capture file. This number won't change, even if a display filter
is used.

• Time The timestamp of the packet. The presentation format of this timestamp can be changed, see
Section 6.10, “Time display formats and time references”.

• Source The address where this packet is coming from.

• Destination The address where this packet is going to.

• Protocol The protocol name in a short (perhaps abbreviated) version.

• Info Additional information about the packet content.

There is a context menu (right mouse click) available, see details in Figure 6.3, “Pop-up menu of the
"Packet List" pane”.

59
 User Interface

3.16. The "Packet Details" pane

The packet details pane shows the current packet (selected in the "Packet List" pane) in a more detailed
form.

Figure 3.14. The "Packet Details" pane

This pane shows the protocols and protocol fields of the packet selected in the "Packet List" pane. The
protocols and fields of the packet are displayed using a tree, which can be expanded and collapsed.

There is a context menu (right mouse click) available, see details in Figure 6.4, “Pop-up menu of the
"Packet Details" pane”.

Some protocol fields are specially displayed.

• Generated fields Wireshark itself will generate additional protocol fields which are surrounded by
brackets. The information in these fields is derived from the known context to other packets in the
capture file. For example, Wireshark is doing a sequence/acknowledge analysis of each TCP stream,
which is displayed in the [SEQ/ACK analysis] fields of the TCP protocol.

• Links If Wireshark detected a relationship to another packet in the capture file, it will generate a link
to that packet. Links are underlined and displayed in blue. If double-clicked, Wireshark jumps to the
corresponding packet.

60
 User Interface

3.17. The "Packet Bytes" pane

The packet bytes pane shows the data of the current packet (selected in the "Packet List" pane) in a hex-
dump style.

Figure 3.15. The "Packet Bytes" pane

As usual for a hexdump, the left side shows the offset in the packet data, in the middle the packet data is
shown in a hexadecimal representation and on the right the corresponding ASCII characters (or . if not
appropriate) are displayed.

There is a context menu (right mouse click) available, see details in Figure 6.5, “Pop-up menu of the
"Packet Bytes" pane”.

Depending on the packet data, sometimes more than one page is available, e.g. when Wireshark has re-
assembled some packets into a single chunk of data, see Section 7.5, “Packet Reassembling”. In this
case there are some additional tabs shown at the bottom of the pane to let you select the page you want
to see.

Figure 3.16. The "Packet Bytes" pane with tabs

Note!
The additional pages might contain data picked from multiple packets.

The context menu (right mouse click) of the tab labels will show a list of all available pages. This can be
helpful if the size in the pane is too small for all the tab labels.

61
 User Interface

3.18. The Statusbar

The statusbar displays informational messages.

In general, the left side will show context related information, while the right side will show the current
number of packets.

Figure 3.17. The initial Statusbar

This statusbar is shown while no capture file is loaded, e.g. when Wireshark is started.

Figure 3.18. The Statusbar with a loaded capture file

The left side shows information about the capture file, its name, its size and the elapsed time while it
was being captured.

The right side shows the current number of packets in the capture file. The following values are dis-
played:

• P: the number of captured packets

• D: the number of packets currently being displayed

• M: the number of marked packets

Figure 3.19. The Statusbar with a selected protocol field

This is displayed if you have selected a protocol field from the "Packet Details" pane.

Tip!
The value between the brackets (in this example arp.opcode) can be used as a display fil-
ter string, representing the selected protocol field.

62
User Interface

63
Chapter 4. Capturing Live Network
Data
4.1. Introduction
Capturing live network data is one of the major features of Wireshark.

The Wireshark capture engine provides the following features:

• Capture from different kinds of network hardware (Ethernet, Token Ring, ATM, ...).

• Stop the capture on different triggers like: amount of captured data, captured time, captured number
of packets.

• Simultaneously show decoded packets while keep on capturing.

• Filter packets, reducing the amount of data to be captured, see Section 4.8, “Filtering while captur-
ing”.

• Capturing into multiple files while doing a long term capture, and in addition the option to form a
ringbuffer of these files, keeping only the last x files, useful for a "very long term" capture, see Sec-
tion 4.6, “Capture files and file modes”.

The capture engine still lacks the following features:

• Simultaneous capturing from multiple network interfaces (however, you can start multiple instances
of Wireshark and merge capture files later).

• Stop capturing (or doing some other action), depending on the captured data.

64
 Capturing Live Network Data

4.2. Prerequisites
Setting up Wireshark to capture packets for the first time can be tricky.

Tip!
A comprehensive guide "How To setup a Capture" is available at: ht-
tp://wiki.wireshark.org/CaptureSetup.

Here are some common pitfalls:

• You need to have root / Administrator privileges to start a live capture.

• You need to choose the right network interface to capture packet data from.

• You need to capture at the right place in the network to see the traffic you want to see.

• ... and a lot more!.

If you have any problems setting up your capture environment, you should have a look at the guide men-
tioned above.

65
 Capturing Live Network Data

4.3. Start Capturing

One of the following methods can be used to start capturing packets with Wireshark:

• You can get an overview of the available local interfaces using the " Capture Interfaces" dialog

box, see Figure 4.1, “The "Capture Interfaces" dialog box”. You can start a capture from this dialog
box, using (one of) the "Capture" button(s).

• You can start capturing using the " Capture Options" dialog box, see Figure 4.2, “The "Cap-

ture Options" dialog box”.

• If you have selected the right capture options before, you can immediately start a capture using the "
Capture Start" menu / toolbar item. The capture process will start immediately.

• If you already know the name of the capture interface, you can start Wireshark from the command
line and use the following:

wireshark -i eth0 -k

This will start Wireshark capturing on interface eth0, more details can be found at: Section 9.2,
“Start Wireshark from the command line”.

66
 Capturing Live Network Data

4.4. The "Capture Interfaces" dialog box

When you select "Interfaces..." from the Capture menu, Wireshark pops up the "Capture Interfaces" dia-
log box as shown in Figure 4.1, “The "Capture Interfaces" dialog box”.

Warning!
As the "Capture Interfaces" dialog is showing live captured data, it is consuming a lot of
system resources. Close this dialog as soon as possible to prevent excessive system load.

Note!
This dialog box will only show the local interfaces Wireshark knows of. As Wireshark
might not be able to detect all local interfaces, and it cannot detect the remote interfaces
available, there could be more capture interfaces available than listed.

Figure 4.1. The "Capture Interfaces" dialog box

Description The interface description provided by the operating system.

IP The first IP address Wireshark could resolve from this interface. If no

address could be resolved (e.g. no DHCP server available), "unknown"
will be displayed. If more than one IP address could be resolved, only
the first is shown (unpredictable which one in that case).

Packets The number of packets captured from this interface, since this dialog
was opened. Will be greyed out, if no packet was captured in the last
second.

Packets/s Number of packets captured in the last second. Will be greyed out, if no
packet was captured in the last second.

Stop Stop a currently running capture.

Capture Start a capture on this interface immediately, using the settings from the
last capture.

Options Open the Capture Options dialog with this interface selected, see Sec-
tion 4.5, “The "Capture Options" dialog box”.

67
 Capturing Live Network Data

Details (Win32 only) Open a dialog with detailed information about the interface.

Close Close this dialog box.

68
 Capturing Live Network Data

4.5. The "Capture Options" dialog box

When you select Start... from the Capture menu (or use the corresponding item in the "Main" toolbar),
Wireshark pops up the "Capture Options" dialog box as shown in Figure 4.2, “The "Capture Options"
dialog box”.

Figure 4.2. The "Capture Options" dialog box

Tip!
If you are unsure which options to choose in this dialog box, just try keeping the defaults
as this should work well in many cases.

You can set the following fields in this dialog box:

69
 Capturing Live Network Data

4.5.1. Capture frame

Interface This field specifies the interface you want to capture on. You can
only capture on one interface, and you can only capture on inter-
faces that Wireshark has found on the system. It is a drop-down
list, so simply click on the button on the right hand side and select
the interface you want. It defaults to the first non-loopback inter-
face that supports capturing, and if there are none, the first loop-
back interface. On some systems, loopback interfaces cannot be
used for capturing (loopback interfaces are not available on Win-
dows platforms).

This field performs the same function as the -i <interface> com-

mand line option.

IP address The IP address(es) of the selected interface. If no address could be

resolved from the system, "unknown" will be shown.

Link-layer header type Unless you are in the rare situation that you need this, just keep
the default. For a detailed description, see Section 4.7,
“Link-layer header type”

Buffer size: n megabyte(s) Enter the buffer size to be used while capturing. This is the size of
the kernel buffer which will keep the captured packets, until they
are written to disk. If you encounter packet drops, try increasing
this value.

Note
This option is only available on Windows platforms.

Capture packets in promiscuous This checkbox allows you to specify that Wireshark should put
mode the interface in promiscuous mode when capturing. If you do not
specify this, Wireshark will only capture the packets going to or
from your computer (not all packets on your LAN segment).

Note
If some other process has put the interface in
promiscuous mode you may be capturing in promis-
cuous mode even if you turn off this option

Note
Even in promiscuous mode you still won't necessar-
ily see all packets on your LAN segment, see http://
www.wireshark.org/faq.html#promiscsniff for some
more explanations.

Limit each packet to n bytes This field allows you to specify the maximum amount of data that
will be captured for each packet, and is sometimes referred to as
the snaplen. If disabled, the default is 65535, which will be suffi-
cient for most protocols. Some rules of thumb:

70
 Capturing Live Network Data

• If you are unsure, just keep the default value.

• If you don't need all of the data in a packet - for example, if

you only need the link-layer, IP, and TCP headers - you might
want to choose a small snapshot length, as less CPU time is
required for copying packets, less buffer space is required for
packets, and thus perhaps fewer packets will be dropped if
traffic is very heavy.

• If you don't capture all of the data in a packet, you might find
that the packet data you want is in the part that's dropped, or
that reassembly isn't possible as the data required for reas-
sembly is missing.

Capture Filter This field allows you to specify a capture filter. Capture filters are
discussed in more details in Section 4.8, “Filtering while captur-
ing”. It defaults to empty, or no filter.

You can also click on the button labelled Capture Filter, and
Wireshark will bring up the Capture Filters dialog box and allow
you to create and/or select a filter. Please see Section 6.6,
“Defining and saving filters”

4.5.2. Capture File(s) frame

An explanation about capture file usage can be found in Section 4.6, “Capture files and file modes”.

File This field allows you to specify the file name that will be used for
the capture file. This field is left blank by default. If the field is
left blank, the capture data will be stored in a temporary file, see
Section 4.6, “Capture files and file modes” for details.

You can also click on the button to the right of this field to
browse through the filesystem.

Use multiple files Instead of using a single file, Wireshark will automatically switch
to a new one, if a specific trigger condition is reached.

Next file every n megabyte(s) Multiple files only: Switch to the next file after the given number
of byte(s)/kilobyte(s)/megabyte(s)/gigabyte(s) have been cap-
tured.

Next file every n minute(s) Multiple files only: Switch to the next file after the given number
of second(s)/minutes(s)/hours(s)/days(s) have elapsed.

Ring buffer with n files Multiple files only: Form a ring buffer of the capture files, with
the given number of files.

Stop capture after n file(s) Multiple files only: Stop capturing after switching to the next file
the given number of times.

4.5.3. Stop Capture... frame

71
 Capturing Live Network Data

... after n packet(s) Stop capturing after the given number of packets have been cap-
tured.

... after n megabytes(s) Stop capturing after the given number of

byte(s)/kilobyte(s)/megabyte(s)/gigabyte(s) have been captured.
This option is greyed out, if "Use multiple files" is selected.

... after n minute(s) Stop capturing after the given number of

second(s)/minutes(s)/hours(s)/days(s) have elapsed.

4.5.4. Display Options frame

Update list of packets in real time This option allows you to specify that Wireshark should update
the packet list pane in real time. If you do not specify this, Wire-
shark does not display any packets until you stop the capture.
When you check this, Wireshark captures in a separate process
and feeds the captures to the display process.

Automatic scrolling in live cap- This option allows you to specify that Wireshark should scroll the
ture packet list pane as new packets come in, so you are always look-
ing at the last packet. If you do not specify this, Wireshark simply
adds new packets onto the end of the list, but does not scroll the
packet list pane. This option is greyed out if "Update list of pack-
ets in real time" is disabled.

Hide capture info dialog If this option is checked, the following capture info dialog will be
hidden.

4.5.5. Name Resolution frame

Enable MAC name resolution This option allows you to control whether or not Wireshark trans-
lates MAC addresses into names, see Section 7.6, “Name Resolu-
tion”.

Enable network name resolution This option allows you to control whether or not Wireshark trans-
lates network addresses into names, see Section 7.6, “Name Res-
olution”.

Enable transport name resolu- This option allows you to control whether or not Wireshark trans-
tion lates transport addresses into protocols, see Section 7.6, “Name
Resolution”.

4.5.6. Buttons
Once you have set the values you desire and have selected the options you need, simply click on Start to
commence the capture, or Cancel to cancel the capture.

If you start a capture, Wireshark allows you to stop capturing when you have enough packets captured,
for details see Section 4.9, “While a Capture is running ...”.

72
 Capturing Live Network Data

4.6. Capture files and file modes

While capturing, the underlying libpcap capturing engine will grab the packets from the network card
and keep the packet data in a (relatively) small kernel buffer. This data is read by Wireshark and saved
into the capture file(s) the user specified.

Different modes of operation are available when saving this packet data to the capture file(s).

Tip!
Working with large files (several 100 MB's) can be quite slow. If you plan to do a long
term capture or capturing from a high traffic network, think about using one of the "Mul-
tiple files" options. This will spread the captured packets over several smaller files which
can be much more pleasant to work with.

Note!
Using Multiple files may cut context related information. Wireshark keeps context inform-
ation of the loaded packet data, so it can report context related problems (like a stream er-
ror) and keeps information about context related protocols (e.g. where data is exchanged at
the establishing phase and only referred to in later packets). As it keeps this information
only for the loaded file, using one of the multiple file modes may cut these contexts. If the
establishing phase is saved in one file and the things you would like to see is in another,
you might not see some of the valuable context related information.

Tip!
Information about the folders used for the capture file(s), can be found in Appendix A,
Files and Folders.

Table 4.1. Capture file mode selected by capture options

"File" option "Use multiple "Ring buffer Mode Resulting filename(s)
files" option with n files" op- used
tion
- - - Single temporary etherXXXXXX (where
file XXXXXX is a unique
number)
foo.cap - - Single named file foo.cap
foo.cap x - Multiple files, foo_00001_20040205110
continuous 102.cap,
foo_00002_20040205110
102.cap, ...
foo.cap x x Multiple files, foo_00001_20040205110
ring buffer 102.cap,
foo_00002_20040205110
102.cap, ...

Single temporary file A temporary file will be created and used (this is the default).

73
 Capturing Live Network Data

After the capturing is stopped, this file can be saved later under a
user specified name.

Single named file A single capture file will be used. If you want to place the new
capture file to a specific folder, choose this mode.

Multiple files, continuous Like the "Single named file" mode, but a new file is created and
used, after reaching one of the multiple file switch conditions (one
of the "Next file every ..." values).

Multiple files, ring buffer Much like "Multiple files continuous", reaching one of the mul-
tiple files switch conditions (one of the "Next file every ..." val-
ues) will switch to the next file. This will be a newly created file
if value of "Ring buffer with n files" is not reached, otherwise it
will replace the oldest of the formerly used files (thus forming a
"ring").

This mode will limit the maximum disk usage, even for an unlim-
ited amount of capture input data, keeping the latest captured
data.

74
 Capturing Live Network Data

4.7. Link-layer header type

In the usual case, you won't have to choose this link-layer header type. The following paragraphs de-
scribe the exceptional cases, where selecting this type is possible, so you will have a guide of what to
do:

If you are capturing on an 802.11 device on some versions of BSD, this might offer a choice of "Ether-
net" or "802.11". "Ethernet" will cause the captured packets to have fake Ethernet headers; "802.11" will
cause them to have IEEE 802.11 headers. Unless the capture needs to be read by an application that
doesn't support 802.11 headers, you should select "802.11".

If you are capturing on an Endace DAG card connected to a synchronous serial line, this might offer a
choice of "PPP over serial" or "Cisco HDLC"; if the protocol on the serial line is PPP, select "PPP over
serial", and if the protocol on the serial line is Cisco HDLC, select "Cisco HDLC".

If you are capturing on an Endace DAG card connected to an ATM network, this might offer a choice of
"RFC 1483 IP-over-ATM" or "Sun raw ATM". If the only traffic being captured is RFC 1483 LLC-
encapsulated IP, or if the capture needs to be read by an application that doesn't support SunATM head-
ers, select "RFC 1483 IP-over-ATM", otherwise select "Sun raw ATM".

If you are capturing on an Ethernet device, this might offer a choice of "Ethernet" or "DOCSIS". If you
are capturing traffic from a Cisco Cable Modem Termination System that is putting DOCSIS traffic onto
the Ethernet to be captured, select "DOCSIS", otherwise select "Ethernet".

75
 Capturing Live Network Data

4.8. Filtering while capturing

Wireshark uses the libpcap filter language for capture filters. This is explained in the tcpdump man page,
which can be hard to understand, so it's explained here to some extent.

Tip!
You will find a lot of Capture Filter examples at http://wiki.wireshark.org/CaptureFilters.

You enter the capture filter into the Filter field of the Wireshark Capture Options dialog box, as shown
in Figure 4.2, “The "Capture Options" dialog box”. The following is an outline of the syntax of the tcp-
dump capture filter language. See the expression option at the tcpdump manual page for details: http://
www.tcpdump.org/tcpdump_man.html.

A capture filter takes the form of a series of primitive expressions connected by conjunctions (and/or)
and optionally preceded by not:

[not] primitive [and|or [not] primitive ...]

An example is shown in Example 4.1, “ A capture filter for telnet that captures traffic to and from a par-
ticular host ”.

Example 4.1. A capture filter for telnet that captures traffic to and from a
particular host

tcp port 23 and host 10.0.0.5

This example captures telnet traffic to and from the host 10.0.0.5, and shows how to use two primitives
and the and conjunction. Another example is shown in Example 4.2, “ Capturing all telnet traffic not
from 10.0.0.5”, and shows how to capture all telnet traffic except that from 10.0.0.5.

Example 4.2. Capturing all telnet traffic not from 10.0.0.5

tcp port 23 and not host 10.0.0.5

XXX - add examples to the following list.

A primitive is simply one of the following:

[src|dst] host <host> This primitive allows you to filter on a host IP address or name.
You can optionally precede the primitive with the keyword
src|dst to specify that you are only interested in source or destina-
tion addresses. If these are not present, packets where the spe-
cified address appears as either the source or the destination ad-

76
 Capturing Live Network Data

dress will be selected.

ether [src|dst] host <ehost> This primitive allows you to filter on Ethernet host addresses.
You can optionally include the keyword src|dst between the
keywords ether and host to specify that you are only interested in
source or destination addresses. If these are not present, packets
where the specified address appears in either the source or destin-
ation address will be selected.

gateway host <host> This primitive allows you to filter on packets that used host as a
gateway. That is, where the Ethernet source or destination was
host but neither the source nor destination IP address was host.

[src|dst] net <net> [{mask This primitive allows you to filter on network numbers. You can
<mask>}|{len <len>}] optionally precede this primitive with the keyword src|dst to spe-
cify that you are only interested in a source or destination net-
work. If neither of these are present, packets will be selected that
have the specified network in either the source or destination ad-
dress. In addition, you can specify either the netmask or the CIDR
prefix for the network if they are different from your own.

[tcp|udp] [src|dst] port <port> This primitive allows you to filter on TCP and UDP port num-
bers. You can optionally precede this primitive with the keywords
src|dst and tcp|udp which allow you to specify that you are only
interested in source or destination ports and TCP or UDP packets
respectively. The keywords tcp|udp must appear before src|dst.

If these are not specified, packets will be selected for both the
TCP and UDP protocols and when the specified address appears
in either the source or destination port field.

less|greater <length> This primitive allows you to filter on packets whose length was
less than or equal to the specified length, or greater than or equal
to the specified length, respectively.

ip|ether proto <protocol> This primitive allows you to filter on the specified protocol at
either the Ethernet layer or the IP layer.

ether|ip broadcast|multicast This primitive allows you to filter on either Ethernet or IP broad-
casts or multicasts.

<expr> relop <expr> This primitive allows you to create complex filter expressions that
select bytes or ranges of bytes in packets. Please see the tcpdump
man page at http:/ / www.tcpdump.org/ tcpdump_man.html for
more details.

4.8.1. Automatic Remote Traffic Filtering

If Wireshark is running remotely (using e.g. SSH, an exported X11 window, a terminal server, ...), the
remote content has to be transported over the network, adding a lot of (usually unimportant) packets to
the actually interesting traffic.

To avoid this, Wireshark tries to figure out if it's remotely connected (by looking at some specific envir-
onment variables) and automatically creates a capture filter that matches aspects of the connection.

The following environment variables are analyzed:

77
 Capturing Live Network Data

SSH_CONNECTION (ssh) <remote IP> <remote port> <local IP> <local port>

SSH_CLIENT (ssh) <remote IP> <remote port> <local port>

REMOTEHOST (tcsh, others?) <remote name>

DISPLAY (x11) [remote name]:<display num>

SESSIONNAME (terminal server) <remote name>

78
 Capturing Live Network Data

4.9. While a Capture is running ...

While a capture is running, the following dialog box is shown:

Figure 4.3. The "Capture Info" dialog box

This dialog box will inform you about the number of captured packets and the time since the capture
was started. The selection of which protocols are counted cannot be changed.

Tip!
This Capture Info dialog box can be hidden, using the "Hide capture info dialog" option in
the Capture Options dialog box.

4.9.1. Stop the running capture

A running capture session will be stopped in one of the following ways:

79
 Capturing Live Network Data

1. Using the " Stop" button from the Capture Info dialog box .

Note!
The Capture Info dialog box might be hidden, if the option "Hide capture info dialog"
is used.

2. Using the menu item "Capture/ Stop".

3. Using the toolbar item " Stop".

4. Pressing the accelerator keys: Ctrl+E.

5. The capture will be automatically stopped, if one of the Stop Conditions is exceeded, e.g. the max-
imum amount of data was captured.

4.9.2. Restart a running capture

A running capture session can be restarted with the same capture options than the last time, this will re-
move all packets previously captured. This can be useful, if some uninteresting packets are captured and
there's no need to keep them.

Restart is a convenience function and equivalent to a capture stop following by an immediate capture
start. A restart can be triggered in one of the following ways:

1. Using the menu item "Capture/ Restart".

2. Using the toolbar item " Restart".

80
Capturing Live Network Data

81
Chapter 5. File Input / Output and
Printing
5.1. Introduction
This chapter will describe input and output of capture data.

• Open/Import capture files in various capture file formats

• Save/Export capture files in various capture file formats

• Merge capture files together

• Print packets

82
 File Input / Output and Printing

5.2. Open capture files

Wireshark can read in previously saved capture files. To read them, simply select the menu or toolbar
item: "File/ Open". Wireshark will then pop up the File Open dialog box, which is discussed in

more detail in Section 5.2.1, “The "Open Capture File" dialog box”.

It's convenient to use drag-and-drop!

... to open a file, by simply dragging the desired file from your file manager and dropping
it onto Wireshark's main window. However, drag-and-drop is not available/won't work in
all desktop environments.

If you didn't save the current capture file before, you will be asked to do so, to prevent data loss (this be-
haviour can be disabled in the preferences).

In addition to its native file format (libpcap format, also used by tcpdump/WinDump and other libpcap/
WinPcap-based programs), Wireshark can read capture files from a large number of other packet capture
programs as well. See Section 5.2.2, “Input File Formats” for the list of capture formats Wireshark un-
derstands.

5.2.1. The "Open Capture File" dialog box

The "Open Capture File" dialog box allows you to search for a capture file containing previously cap-
tured packets for display in Wireshark. Table 5.1, “The system specific "Open Capture File" dialog box”
shows some examples of the Wireshark Open File Dialog box.

The dialog appearance depends on your system!

The appearance of this dialog depends on the system and GTK+ toolkit version used.
However, the functionality remains basically the same on either system.

Common dialog behaviour on all systems:

• Select files and directories.

• Click the Open/Ok button to accept your selected file and open it.

• Click the Cancel button to go back to Wireshark and not load a capture file.

Wireshark extensions to the standard behaviour of these dialogs:

• View file preview information (like the filesize, the number of packets, ...), if you've selected a cap-
ture file.

• Specify a display filter with the "Filter:" button and filter field. This filter will be used when opening
the new file. The text field background becomes green for a valid filter string and red for an invalid
one. Clicking on the Filter button causes Wireshark to pop up the Filters dialog box (which is dis-
cussed further in Section 6.3, “Filtering packets while viewing”).

XXX - we need a better description of these read filters

83
 File Input / Output and Printing

• Specify which name resolution is to be performed for all packets by clicking on one of the "... name
resolution" check buttons. Details about name resolution can be found in Section 7.6, “Name Resol-
ution”.

Save a lot of time on huge capture files!

You can change the display filter and name resolution settings later while viewing the
packets. However, for huge capture files it can take a significant amount of extra time
changing these settings later, so in such situations it can be a good idea to set at least the
filter in advance here.

Table 5.1. The system specific "Open Capture File" dialog box

Microsoft Windows (GTK2 installed)

Figure 5.1. "Open" on native Windows This is the common Windows file open dialog -
plus some Wireshark extensions.

Specific for this dialog:

• If available, the "Help" button will lead you to

this section of this "User's Guide".

• XXX - the "Filter:" button currently doesn't

work on Windows!

• XXX - missing feature: If Wireshark doesn't

recognize the selected file as a capture file, it
should grey out the "Open" button.

Unix/Linux: GTK version >= 2.4

Figure 5.2. "Open" - new GTK version This is the common Gimp/GNOME file open dia-
log - plus some Wireshark extensions.

Specific for this dialog:

• The "+ Add" button allows you to add a direct-

ory, selected in the right-hand pane, to the fa-
vorites list on the left. Those changes are per-
sistent.

• The "- Remove" button allows you to remove a

selected directory from that list again (the

84
 File Input / Output and Printing

items like: "Home", "Desktop", and "Filesys-

tem" cannot be removed).

• If Wireshark doesn't recognize the selected file

as a capture file, it will grey out the "Open"
button.

Unix/Linux: GTK version < 2.4 / Microsoft

Windows (GTK1 installed)
Figure 5.3. "Open" - old GTK version
This is the file open dialog of former Gimp/
GNOME versions - plus some Wireshark exten-
sions.

Specific for this dialog:

• If Wireshark doesn't recognize the selected file

as a capture file, it will grey out the "Ok" but-
ton.

5.2.2. Input File Formats

The following file formats from other capture tools can be opened by Wireshark:

• libpcap, tcpdump and various other tools using tcpdump's capture format

• Sun snoop and atmsnoop

• Shomiti/Finisar Surveyor captures

• Novell LANalyzer captures

• Microsoft Network Monitor captures

• AIX's iptrace captures

• Cinco Networks NetXray captures

• Network Associates Windows-based Sniffer and Sniffer Pro captures

85
 File Input / Output and Printing

• Network General/Network Associates DOS-based Sniffer (compressed or uncompressed) captures

• AG Group/WildPackets EtherPeek/TokenPeek/AiroPeek/EtherHelp/PacketGrabber captures

• RADCOM's WAN/LAN Analyzer captures

• Network Instruments Observer version 9 captures

• Lucent/Ascend router debug output

• HP-UX's nettl

• Toshiba's ISDN routers dump output

• ISDN4BSD i4btrace utility

• traces from the EyeSDN USB S0

• IPLog format from the Cisco Secure Intrusion Detection System

• pppd logs (pppdump format)

• the output from VMS's TCPIPtrace/TCPtrace/UCX$TRACE utilities

• the text output from the DBS Etherwatch VMS utility

• Visual Networks' Visual UpTime traffic capture

• the output from CoSine L2 debug

• the output from Accellent's 5Views LAN agents

• Endace Measurement Systems' ERF format captures

• Linux Bluez Bluetooth stack hcidump -w traces

• Catapult DCT2000 .out files

Open a file may fail due to invalid packet types!

It may not be possible to read some formats dependent on the packet types captured. Ether-
net captures are usually supported for most file formats, but other packet types (e.g. token
ring packets) may not be possible to read from all file formats.

86
 File Input / Output and Printing

5.3. Saving captured packets

You can save captured packets simply by using the Save As... menu item from the File menu under
Wireshark. You can choose which packets to save and which file format to be used.

Saving may reduce the available information!

Saving the captured packets will slightly reduce the amount of information, e.g. the num-
ber of dropped packets will be lost, see Section A.1, “Capture Files” for details.

5.3.1. The "Save Capture File As" dialog box

The "Save Capture File As" dialog box allows you to save the current capture to a file. Table 5.2, “The
system specific "Save Capture File As" dialog box” shows some examples of this dialog box.

The dialog appearance depends on your system!

The appearance of this dialog depends on the system and GTK+ toolkit version used.
However, the functionality remains basically the same on either system.

Table 5.2. The system specific "Save Capture File As" dialog box

Microsoft Windows (GTK2 installed)

Figure 5.4. "Save" on native Windows This is the common Windows file save dialog -
plus some Wireshark extensions.

Specific for this dialog:

• If available, the "Help" button will lead you to

this section of this "User's Guide".

• If you don't provide a file extension to the file-

name - e.g. .pcap, Wireshark will append the
standard file extension for that file format.

Unix/Linux: GTK version >= 2.4

Figure 5.5. "Save" - new GTK version This is the common Gimp/GNOME file save dia-
log - plus some Wireshark extensions.

Specific for this dialog:

87
 File Input / Output and Printing

• Clicking on the + at "Browse for other folders"

will allow you to browse files and folders in
your file system.

Unix/Linux: GTK version < 2.4 / Microsoft

Windows (GTK1 installed)
Figure 5.6. "Save" - old GTK version
This is the file save dialog of former Gimp/
GNOME versions - plus some Wireshark exten-
sions.

With this dialog box, you can perform the following actions:

88
 File Input / Output and Printing

1. Type in the name of the file you wish to save the captured packets in, as a standard file name in
your file system.

2. Select the directory to save the file into.

3. Select the range of the packets to be saved, see Section 5.8, “The Packet Range frame”

4. Specify the format of the saved capture file by clicking on the File type drop down box. You can
choose from the types, described in Section 5.3.2, “Output File Formats”.

The selection of capture formats may be reduced!

Some capture formats may not be available, depending on the packet types captured.

File formats can be converted!

You can convert capture files from one format to another by reading in a capture file
and writing it out using a different format.

5. Click on the Save/Ok button to accept your selected file and save to it. If Wireshark has a problem
saving the captured packets to the file you specified, it will display an error dialog box. After click-
ing OK on that error dialog box, you can try again.

6. Click on the Cancel button to go back to Wireshark and not save the captured packets.

5.3.2. Output File Formats

Wireshark can save the packet data in it's "native" file format (libpcap) and in the file formats of some
other protocol analyzers, so other tools can read the capture data.

File formats have different time stamp accuracys!

Saving from the currently used to a different file format may reduce the time stamp accur-
acy, see the Section 7.3, “Time Stamps” for details.

The following file formats can be saved by Wireshark (with the known file extensions):

• libpcap, tcpdump and various other tools using tcpdump's capture format (*.pcap,*.cap,*.dmp)

• Accellent 5Views (*.5vw)

• HP-UX's nettl (*.TRC0,*.TRC1)

• Microsoft Network Monitor - NetMon (*.cap)

• Network Associates Sniffer - DOS (*.cap,*.enc,*.trc,*fdc,*.syc)

• Network Associates Sniffer - Windows (*.cap)

• Network Instruments Observer version 9 (*.bfr)

• Novell LANalyzer (*.tr1)

89
 File Input / Output and Printing

• Sun snoop (*.snoop,*.cap)

• Visual Networks Visual UpTime traffic (*.*)

If the above tools will be more helpful than Wireshark is a different question ;-)

Third party protocol analyzers may require specific file

extensions!
Other protocol analyzers than Wireshark may require that the file has a certain file exten-
sion in order to read the files you generate with Wireshark, e.g.:

".cap" for Network Associates Sniffer - Windows

90
 File Input / Output and Printing

5.4. Merging capture files

Sometimes you need to merge several capture files into one. For example this can be useful, if you have
captured simultaneously from multiple interfaces at once (e.g. using multiple instances of Wireshark).

Merging capture files can be done in three ways:

• Use the menu item "Merge" from the "File" menu, to open the merge dialog, see Section 5.4.1,
“The "Merge with Capture File" dialog box”. This menu item will be disabled, until you have loaded
a capture file.

• Use drag-and-drop to drop multiple files on the main window. Wireshark will try to merge the
packets in chronological order from the dropped files into a newly created temporary file. If you
drop only a single file, it will simply replace a (maybe) existing one.

• Use the mergecap tool, which is a command line tool to merge capture files. This tool provides the
most options to merge capture files, see Section D.7, “mergecap: Merging multiple capture files into
one ”.

5.4.1. The "Merge with Capture File" dialog box

This dialog box let you select a file to be merged into the currently loaded file.

You will be prompted for an unsaved file first!

If your current data wasn't saved before, you will be asked to save it first, before this dialog
box is shown.

Most controls of this dialog will work the same way as described in the "Open Capture File" dialog box,
see Section 5.2.1, “The "Open Capture File" dialog box”.

Specific controls of this merge dialog are:

Prepend packets to existing file Prepend the packets from the selected file before the currently
loaded packets.

Merge packets chronologically Merge both the packets from the selected and currently loaded file
in chronological order.

Append packets to existing file Append the packets from the selected file after the currently
loaded packets.

Table 5.3. The system specific "Merge Capture File As" dialog box

Microsoft Windows (GTK2 installed)

Figure 5.7. "Merge" on native Windows This is the common Windows file open dialog -
plus some Wireshark extensions.

91
 File Input / Output and Printing

Unix/Linux: GTK version >= 2.4

Figure 5.8. "Merge" - new GTK version This is the common Gimp/GNOME file open dia-
log - plus some Wireshark extensions.

Unix/Linux: GTK version < 2.4 / Microsoft

Windows (GTK1 installed)
Figure 5.9. "Merge" - old GTK version
This is the file open dialog of former Gimp/
GNOME versions - plus some Wireshark exten-
sions.

92
 File Input / Output and Printing

5.5. File Sets

When using the "Multiple Files" option while doing a capture (see: Section 4.6, “Capture files and file
modes”), the capture data is spread over several capture files, called a file set.

As it can become tedious to work with a file set by hand, Wireshark provides some features to handle
these file sets in a convenient way.

How does Wireshark detect the files of a file set?

A filename in a file set uses the format Prefix_Number_DateTimeSuffix which might look like
this: "test_00001_20060420183910.pcap". All files of a file set share the same prefix (e.g. "test")
and suffix (e.g. ".pcap") and a varying middle part.

To find the files of a file set, Wireshark scans the directory where the currently loaded file resides
and scans for files matching the same filename pattern (prefix and suffix) than the currently
loaded file.

This simple mechanism usually works well, but has it's drawbacks. If several file sets were cap-
tured with the same prefix and suffix, Wireshark will detect them as a single file set. If files were
renamed or spread over several directories the mechanism will fail to find all files of a set.

The following features in the "File Set" submenu of the "File" menu are available to work with file sets
in a convenient way:

• The List Files dialog box will list the files Wireshark has recognized as being part of the current file
set.

• Next File closes the current and opens the next file in the file set.

• Previous File closes the current and opens the previous file in the file set.

5.5.1. The "List Files" dialog box

Figure 5.10. The "List Files" dialog box

93
 File Input / Output and Printing

Each line contains information about a file of the file set:

• Filename the name of the file. If you click on the filename (or the radio button left to it), the current
file will be closed and the corresponding capture file will be opened.

• Created the creation time of the file

• Last Modified the last time the file was modified

• Size the size of the file

The last line will contain info about the currently used directory where all of the files in the file set can
be found.

The content of this dialog box is updated each time a capture file is opened/closed.

The Close button will, well, close the dialog box.

94
 File Input / Output and Printing

5.6. Exporting data

Wireshark provides several ways and formats to export packet data. This section describes general ways
to export data from Wireshark.

Note!
There are more specialized functions to export specific data, which will be described at the
appropriate places.

XXX - add detailed descriptions of the output formats and some sample output, too.

5.6.1. The "Export as Plain Text File" dialog box

Export packet data into a plain ASCII text file, much like the format used to print packets.

Figure 5.11. The "Export as Plain Text File" dialog box

• Export to file: frame chooses the file to export the packet data to.

• The Packet Range frame is described in Section 5.8, “The Packet Range frame”.

• The Packet Details frame is described in Section 5.9, “The Packet Format frame”.

95
 File Input / Output and Printing

5.6.2. The "Export as PostScript File" dialog box

Export packet data into PostScript, much like the format used to print packets.

Tip!
You can easily convert PostScript files to PDF files using ghostscript. For example: export
to a file named foo.ps and then call: ps2pdf foo.ps

Figure 5.12. The "Export as PostScript File" dialog box

• Export to file: frame chooses the file to export the packet data to.

• The Packet Range frame is described in Section 5.8, “The Packet Range frame”.

• The Packet Details frame is described in Section 5.9, “The Packet Format frame”.

5.6.3. The "Export as CSV (Comma Separated Values)

File" dialog box
XXX - add screenshot

96
 File Input / Output and Printing

Export packet summary into CSV, used e.g. by spreadsheet programs to im-/export data.

• Export to file: frame chooses the file to export the packet data to.

• The Packet Range frame is described in Section 5.8, “The Packet Range frame”.

5.6.4. The "Export as PSML File" dialog box

Export packet data into PSML. This is an XML based format including only the packet summary.

Figure 5.13. The "Export as PSML File" dialog box

• Export to file: frame chooses the file to export the packet data to.

• The Packet Range frame is described in Section 5.8, “The Packet Range frame”.

There's no such thing as a packet details frame for PSML export, as the packet format is defined by the
PSML specification.

5.6.5. The "Export as PDML File" dialog box

Export packet data into PDML. This is an XML based format including the packet details. The PDML

97
 File Input / Output and Printing

file specification is available at: PDML specification.

The PDML specification is not officially released and Wireshark's implementation of it is

still in an early beta state, so please expect changes in future Wireshark versions.

Figure 5.14. The "Export as PDML File" dialog box

• Export to file: frame chooses the file to export the packet data to.

• The Packet Range frame is described in Section 5.8, “The Packet Range frame”.

There's no such thing as a packet details frame for PDML export, as the packet format is defined by the
PDML specification.

5.6.6. The "Export selected packet bytes" dialog box

Export the bytes selected in the "Packet Bytes" pane into a raw binary file.

Figure 5.15. The "Export Selected Packet Bytes" dialog box

98
 File Input / Output and Printing

• Name: the filename to export the packet data to.

• The Save in folder: field lets you select the folder to save to (from some predefined folders).

• Browse for other folders provides a flexible way to choose a folder.

99
 File Input / Output and Printing

5.7. Printing packets

To print packets, select the "Print..." menu item from the File menu. When you do this, Wireshark pops
up the Print dialog box as shown in Figure 5.16, “The "Print" dialog box”.

5.7.1. The "Print" dialog box

Figure 5.16. The "Print" dialog box

The following fields are available in the Print dialog box:

Printer This field contains a pair of mutually exclusive radio buttons:

• Plain Text specifies that the packet print should be in plain text.

• PostScript specifies that the packet print process should use PostScript to gen-
erate a better print output on PostScript aware printers.

• Output to file: specifies that printing be done to a file, which name is entered
in the field or selected using the browse button.

100
 File Input / Output and Printing

This field is where you enter the file to print to if you have selected Print to a
file, or you can click the button to browse the filesystem. It is greyed out if
Print to a file is not selected.

• Print command specifies that a command be used for printing.

Note!
These Print command fields are not available on windows plat-
forms.

This field specifies the command to use for printing. It is typically lpr. You
would change it to specify a particular queue if you need to print to a queue
other than the default. An example might be:

lpr -Pmypostscript

This field is greyed out if Output to file: is checked above.

Packet Range Select the packets to be printed, see Section 5.8, “The Packet Range frame”

Packet Format Select the output format of the packets to be printed. You can choose, how each
packet is printed, see Figure 5.18, “The "Packet Format" frame”

101
 File Input / Output and Printing

5.8. The Packet Range frame

The packet range frame is a part of various output related dialog boxes. It provides options to select
which packets should be processed by the output function.

Figure 5.17. The "Packet Range" frame

If the Captured button is set (default), all packets from the selected rule will be processed. If the Dis-
played button is set, only the currently displayed packets are taken into account to the selected rule.

• All packets will process all packets.

• Selected packet only process only the selected packet.

• Marked packets only process only the marked packets.

• From first to last marked packet process the packets from the first to the last marked one.

• Specify a packet range process a user specified range of packets, e.g. specifying 5,10-15,20- will
process the packet number five, the packets from packet number ten to fifteen (inclusive) and every
packet from number twenty to the end of the capture.

102
 File Input / Output and Printing

5.9. The Packet Format frame

The packet format frame is a part of various output related dialog boxes. It provides options to select
which parts of a packet should be used for the output function.

Figure 5.18. The "Packet Format" frame

• Packet summary line enable the output of the summary line, just as in the "Packet List" pane.

• Packet details enable the output of the packet details tree.

• All collapsed the info from the "Packet Details" pane in "all collapsed" state.

• As displayed the info from the "Packet Details" pane in the current state.

• All expanded the info from the "Packet Details" pane in "all expanded" state.

• Packet bytes enable the output of the packet bytes, just as in the "Packet Bytes" pane.

• Each packet on a new page put each packet on a separate page (e.g. when saving/printing to a text
file, this will put a form feed character between the packets).

103
File Input / Output and Printing

104
Chapter 6. Working with captured
packets
6.1. Viewing packets you have captured
Once you have captured some packets, or you have opened a previously saved capture file, you can view
the packets that are displayed in the packet list pane by simply clicking on a packet in the packet list
pane, which will bring up the selected packet in the tree view and byte view panes.

You can then expand any part of the tree view by clicking on the plus sign (the symbol itself may vary)
to the left of that part of the payload, and you can select individual fields by clicking on them in the tree
view pane. An example with a TCP packet selected is shown in Figure 6.1, “Wireshark with a TCP
packet selected for viewing”. It also has the Acknowledgment number in the TCP header selected,
which shows up in the byte view as the selected bytes.

Figure 6.1. Wireshark with a TCP packet selected for viewing

You can also select and view packets the same way, while Wireshark is capturing, if you selected "Up-
date list of packets in real time" in the Wireshark Capture Preferences dialog box.

In addition, you can view individual packets in a separate window as shown in Figure 6.2, “Viewing a

105
 Working with captured packets

packet in a separate window”. Do this by selecting the packet you are interested in the packet list pane,
and then select "Show Packet in New Windows" from the Display menu. This allows you to easily com-
pare two or even more packets.

Figure 6.2. Viewing a packet in a separate window

106
 Working with captured packets

6.2. Pop-up menus

You can bring up a pop-up menu over either the "Packet List", "Packet Details" or "Packet Bytes" pane
by clicking your right mouse button at the corresponding pane.

6.2.1. Pop-up menu of the "Packet List" pane

Figure 6.3. Pop-up menu of the "Packet List" pane

The following table gives an overview of which functions are available in this pane, where to find the
corresponding function in the main menu, and a short description of each item.

Table 6.1. The menu items of the "Packet List" pop-up menu
Item Identical to main Description
menu's item:
Mark Packet Edit
(toggle) Mark/unmark a packet.
Set Time Refer- Edit
ence (toggle) Set/reset a time reference.

107
 Working with captured packets

Item Identical to main Description

menu's item:
-----
Apply as Filter Analyze
Prepare and apply a display filter based on the currently selec-
ted item.
Prepare a Filter Analyze
Prepare a display filter based on the currently selected item.
Conversation Fil- -
ter This menu item applies a display filter with the address inform-
ation from the selected packet. E.g. the IP menu entry will set a
filter to show the traffic between the two IP addresses of the
current packet. XXX - add a new section describing this better.
SCTP -
XXX - add an explanation of this.
Follow TCP Analyze
Stream Allows you to view all the data on a TCP stream between a pair
of nodes.
Follow SSL Analyze
Stream Same as "Follow TCP Stream" but for SSL. XXX - add a new
section describing this better.
-----
Decode As... Analyze
Change or apply a new relation between two dissectors.
Print... File
Print packets.
Show Packet in View
New Window Display the selected packet in a new window.

6.2.2. Pop-up menu of the "Packet Details" pane

Figure 6.4. Pop-up menu of the "Packet Details" pane

108
 Working with captured packets

The following table gives an overview of which functions are available in this pane, where to find the
corresponding function in the main menu, and a short description of each item.

Table 6.2. The menu items of the "Packet Details" pop-up menu
Item Identical to main Description
menu's item:
Copy -
Copy the displayed text of the selected field to the system clip-
board.
-----
Expand Subtrees View
Expand the currently selected subtree.
Expand All View
Expand all subtrees in all packets in the capture.
Collapse All View
Wireshark keeps a list of all the protocol subtrees that are ex-
panded, and uses it to ensure that the correct subtrees are ex-
panded when you display a packet. This menu item collapses
the tree view of all packets in the capture list.
-----
Apply as Filter Analyze
Prepare and apply a display filter based on the currently selec-

109
 Working with captured packets

Item Identical to main Description

menu's item:

ted item. name.

Prepare a Filter Analyze
Prepare a display filter based on the currently selected item.
Follow TCP Analyze
Stream Allows you to view all the data on a TCP stream between a pair
of nodes.
Follow SSL Analyze
Stream Same as "Follow TCP Stream" but for SSL. XXX - add a new
section describing this better.
-----
Wiki Protocol -
Page Show the wiki page corresponding to the currently selected
protocol in your web browser.
Filter Field Ref- -
erence Show the filter field reference web page corresponding to the
currently selected protocol in your web browser.
Protocol Prefer- -
ences... The menu item takes you to the properties dialog and selects
the page corresponding to the protocol if there are properties
associated with the highlighted field. More information on pref-
erences can be found in Figure 9.8, “The preferences dialog
box”.
-----
Decode As... Analyze
Change or apply a new relation between two dissectors.
Resolve Name View
Causes a name resolution to be performed for the selected
packet, but NOT every packet in the capture.
Go to Corres- Go
ponding Packet If the selected field has a corresponding packet, go to it. Cor-
responding packets will usually be a request/response packet
pair or such.

6.2.3. Pop-up menu of the "Packet Bytes" pane

Figure 6.5. Pop-up menu of the "Packet Bytes" pane

110
 Working with captured packets

The following table gives an overview of which functions are available in this pane, where to find the
corresponding function in the main menu, and a short description of each item.

Table 6.3. The menu items of the "Packet Bytes" pop-up menu
Item Identical to main Description
menu's item:
Copy/All Inform- -
ation Copy the selected (XXX - all?) packet data to the clipboard
(XXX - in which format).
Copy/Text Only -
Copy the selected packet data to the clipboard (XXX - in which
format).
Export Selected File
Packet Bytes... This menu item is the same as the File menu item of the same
name. It allows you to export raw packet bytes to a binary file.

111
 Working with captured packets

6.3. Filtering packets while viewing

Wireshark has two filtering languages: One used when capturing packets, and one used when displaying
packets. In this section we explore that second type of filter: Display filters. The first one has already
been dealt with in Section 4.8, “Filtering while capturing”.

Display filters allow you to concentrate on the packets you are interested in while hiding the currently
uninteresting ones. They allow you to select packets by:

• Protocol

• The presence of a field

• The values of fields

• A comparison between fields

• ... and a lot more!

To select packets based on protocol type, simply type the protocol you are interested in in the Filter:
field in the filter toolbar of the Wireshark window and press enter to initiate the filter. Figure 6.6,
“Filtering on the TCP protocol” shows an example of what happens when you type tcp in the filter field.

Note!
All protocol and field names are entered in lowercase. Also, don't forget to press enter after
entering the filter expression.

Figure 6.6. Filtering on the TCP protocol

112
 Working with captured packets

As you might have noticed, only packets of the TCP protocol are displayed now (e.g. packets 1-10 are
hidden). The packet numbering will remain as before, so the first packet shown is now packet number
11.

Note!
When using a display filter, all packets remain in the capture file. The display filter only
changes the display of the capture file but not its content!

You can filter on any protocol that Wireshark understands. You can also filter on any field that a dissect-
or adds to the tree view, but only if the dissector has added an abbreviation for the field. A list of such
fields is available in Wireshark in the Add Expression... dialog box. You can find more information on
the Add Expression... dialog box in Section 6.5, “The "Filter Expression" dialog box”.

For example, to narrow the packet list pane down to only those packets to or from the IP address
192.168.0.1, use ip.addr==192.168.0.1.

Note!
To remove the filter, click on the Clear button to the right of the filter field.

113
 Working with captured packets

6.4. Building display filter expressions

Wireshark provides a simple but powerful display filter language that you can build quite complex filter
expressions with. You can compare values in packets as well as combine expressions into more specific
expressions. The following sections provide more information on doing this.

Tip!
You will find a lot of Display Filter examples at the Wireshark Wiki Display Filter page
at http://wiki.wireshark.org/DisplayFilters.

6.4.1. Display filter fields

Every field in the packet details pane can be used as a filter string, this will result in showing only the
packets where this field exists. For example: the filter string: tcp will show all packets containing the tcp
protocol.

There is a complete list of all filter fields available through the menu item "Help/Supported Protocols" in
the page "Display Filter Fields" of the upcoming dialog.

XXX - add some more info here and a link to the statusbar info.

6.4.2. Comparing values

You can build display filters that compare values using a number of different comparison operators.
They are shown in Table 6.4, “Display Filter comparison operators”.

Tip!
You can use English and C-like terms in the same way, they can even be mixed in a filter
string!

Table 6.4. Display Filter comparison operators

English C-like Description and example
eq
== Equal

ip.addr==10.0.0.5

ne
!= Not equal

ip.addr!=10.0.0.5

gt
> Greater than

frame.pkt_len > 10

114
 Working with captured packets

English C-like Description and example

lt
< Less than

frame.pkt_len < 128

ge
>= Greater than or equal to

frame.pkt_len ge 0x100

le
<= Less than or equal to

frame.pkt_len <= 0x20

In addition, all protocol fields are typed. Table 6.5, “Display Filter Field Types” provides a list of the
types and example of how to express them.

Table 6.5. Display Filter Field Types

Type Example
Unsigned integer (8-bit, 16-bit, 24-bit, 32-bit)
You can express integers in decimal, octal, or
hexadecimal. The following display filters are
equivalent:

ip.len le 1500
ip.len le 02734
ip.len le 0x436

Signed integer (8-bit, 16-bit, 24-bit, 32-bit)

Boolean
A boolean field is present in the protocol decode
only if its value is true. For example, tcp.flags.syn
is present, and thus true, only if the SYN flag is
present in a TCP segment header.

Thus the filter expression tcp.flags.syn will select

only those packets for which this flag exists, that
is, TCP segments where the segment header con-
tains the SYN flag. Similarly, to find source-routed
token ring packets, use a filter expression of tr.sr.
Ethernet address (6 bytes) eth.addr == ff:ff:ff:ff:ff:ff
IPv4 address ip.addr == 192.168.0.1
IPv6 address
IPX network number
String (text)

115
 Working with captured packets

Type Example
Double-precision floating point number

6.4.3. Combining expressions

You can combine filter expressions in Wireshark using the logical operators shown in Table 6.6,
“Display Filter Logical Operations”

Table 6.6. Display Filter Logical Operations

English C-like Description and example
and &&
Logical AND

ip.addr==10.0.0.5 and tcp.flags.fin

or ||
Logical OR

ip.addr==10.0.0.5 or ip.addr==192.1.1.1

xor ^^
Logical XOR

tr.dst[0:3] == 0.6.29 xor tr.src[0:3] == 0.6.29

not !
Logical NOT

not llc

[...]
Substring Operator

Wireshark allows you to select subsequences of a sequence in rather elaborate

ways. After a label you can place a pair of brackets [] containing a comma
separated list of range specifiers.

eth.src[0:3] == 00:00:83

The example above uses the n:m format to specify a single range. In this case
n is the beginning offset and m is the length of the range being specified.

eth.src[1-2] == 00:83

The example above uses the n-m format to specify a single range. In this case

116
 Working with captured packets

English C-like Description and example

n is the beginning offset and m is the ending offset.

eth.src[:4] == 00:00:83:00

The example above uses the :m format, which takes everything from the be-
ginning of a sequence to offset m. It is equivalent to 0:m

eth.src[4:] == 20:20

The example above uses the n: format, which takes everything from offset n to
the end of the sequence.

eth.src[2] == 83

The example above uses the n format to specify a single range. In this case the
element in the sequence at offset n is selected. This is equivalent to n:1.

eth.src[0:3,1-2,:4,4:,2] ==
00:00:83:00:83:00:00:83:00:20:20:83

Wireshark allows you to string together single ranges in a comma separated

list to form compound ranges as shown above.

6.4.4. A common mistake

Warning!
Using the != operator on combined expressions like: eth.addr, ip.addr, tcp.port, udp.port
and alike will probably not work as expected!

Often people use a filter string to display something like ip.addr == 1.2.3.4 which will display all pack-
ets containing the IP address 1.2.3.4.

Then they use ip.addr != 1.2.3.4 to see all packets not containing the IP address 1.2.3.4 in it. Unfortu-
nately, this does not do the expected.

Instead, that expression will even be true for packets where either source or destination IP address
equals 1.2.3.4. The reason for this, is that the expression ip.addr != 1.2.3.4 must be read as "the packet
contains a field named ip.addr with a value different from 1.2.3.4". As an IP datagram contains both a
source and a destination address, the expression will evaluate to true whenever at least one of the two
addresses differs from 1.2.3.4.

If you want to filter out all packets containing IP datagrams to or from IP address 1.2.3.4, then the cor-
rect filter is !(ip.addr == 1.2.3.4) as it reads "show me all the packets for which it is not true that a field
named ip.addr exists with a value of 1.2.3.4", or in other words, "filter out all packets for which there are
no occurrences of a field named ip.addr with the value 1.2.3.4".

117
 Working with captured packets

6.5. The "Filter Expression" dialog box

When you are accustomed to Wireshark's filtering system and know what labels you wish to use in your
filters it can be very quick to simply type a filter string. However if you are new to Wireshark or are
working with a slightly unfamiliar protocol it can be very confusing to try to figure out what to type. The
Filter Expression dialog box helps with this.

Tip!
The "Filter Expression" dialog box is an excellent way to learn how to write Wireshark
display filter strings.

Figure 6.7. The "Filter Expression" dialog box

When you first bring up the Filter Expression dialog box you are shown a tree list of field names, organ-
ized by protocol, and a box for selecting a relation.

Field Name Select a protocol field from the protocol field tree. Every protocol with filterable fields
is listed at the top level. By clicking on the "+" next to a protocol name you can get a
list of the field names available for filtering for that protocol.

Relation Select a relation from the list of available relation. The is present is a unary relation
which is true if the selected field is present in a packet. All other listed relations are
binary relations which require additional data (e.g. a Value to match) to complete.

118
 Working with captured packets

When you select a field from the field name list and select a binary relation (such as the equality relation
==) you will be given the opportunity to enter a value, and possibly some range information.

Value You may enter an appropriate value in the Value text box. The Value will
also indicate the type of value for the field name you have selected (like
character string).

Predefined values Some of the protocol fields have predefined values available, much like
enum's in C. If the selected protocol field has such values defined, you can
choose one of them here.

Range XXX - add an explanation here!

OK When you have built a satisfactory expression click OK and a filter string
will be built for you.

Cancel You can leave the Add Expression... dialog box without any effect by
clicking the Cancel button.

119
 Working with captured packets

6.6. Defining and saving filters

You can define filters with Wireshark and give them labels for later use. This can save time in remem-
bering and retyping some of the more complex filters you use.

To define a new filter or edit an existing one, select the Capture Filters... menu item from the Capture
menu or the Display Filters... menu item from the Analyze menu. Wireshark will then pop up the Filters
dialog as shown in Figure 6.8, “The "Capture Filters" and "Display Filters" dialog boxes”.

Note!
The mechanisms for defining and saving capture filters and display filters are almost
identical. So both will be described here, differences between these two will be marked as
such.

Warning!
You must use Save to save your filters permanently. Ok or Apply will not save the filters,
so they will be lost when you close Wireshark.

Figure 6.8. The "Capture Filters" and "Display Filters" dialog boxes

120
 Working with captured packets

New This button adds a new filter to the list of filters. The currently entered val-
ues from Filter name and Filter string will be used. If any of these fields are
empty, it will be set to "new".

Delete This button deletes the selected filter. It will be greyed out, if no filter is se-
lected.

Filter You can select a filter from this list (which will fill in the filter name and fil-
ter string in the fields down the bottom of the dialog box).

Filter name: You can change the name of the currently selected filter here.

Note!
The filter name will only be used in this dialog to identify the
filter for your convenience, it will not be used elsewhere. You
can add multiple filters with the same name, but this is not
very useful.

121
 Working with captured packets

Filter string: You can change the filter string of the currently selected filter here. Display
Filter only: the string will be syntax checked while you are typing.

Add Expression... Display Filter only: This button brings up the Add Expression dialog box
which assists in building filter strings. You can find more information about
the Add Expression dialog in Section 6.5, “The "Filter Expression" dialog
box”

OK Display Filter only: This button applies the selected filter to the current dis-
play and closes the dialog.

Apply Display Filter only: This button applies the selected filter to the current dis-
play, and keeps the dialog open.

Save Save the current settings in this dialog. The file location and format is ex-
plained in Appendix A, Files and Folders.

Close Close this dialog. This will discard unsaved settings.

122
 Working with captured packets

6.7. Finding packets

You can easily find packets once you have captured some packets or have read in a previously saved
capture file. Simply select the Find Packet... menu item from the Edit menu. Wireshark will pop up the
dialog box shown in Figure 6.9, “The "Find Packet" dialog box”.

6.7.1. The "Find Packet" dialog box

Figure 6.9. The "Find Packet" dialog box

You might first select the kind of thing to search for:

• Display filter

Simply enter a display filter string into the Filter: field, select a direction, and click on OK.

For example, to find the three way handshake for a connection from host 192.168.0.1, use the fol-
lowing filter string:

ip.addr==192.168.0.1 and tcp.flags.syn

For more details on display filters, see Section 6.3, “Filtering packets while viewing”

• Hex Value

Search for a specific byte sequence in the packet data.

For example, use "00:00" to find the next packet including two null bytes in the packet data.

• String

123
 Working with captured packets

Find a string in the packet data, with various options.

The value to be found will by syntax checked while you type it in. If the syntax check of your value suc-
ceeded, the background of the entry field will turn green, if it fails, it will turn red.

You can choose the direction to be searched for:

• Up

Search upwards in the packet list (decreasing packet numbers).

• Down

Search downwards in the packet list (increasing packet numbers).

6.7.2. The "Find Next" command

"Find Next" will continue searching with the same options like in the last "Find Packet" run.

6.7.3. The "Find Previous" command

"Find Previous" will do the same thing as "Find Next", but with reverse search direction.

124
 Working with captured packets

6.8. Go to a specific packet

You can easily jump to specific packets with one of the menu items in the Go menu.

6.8.1. The "Go Back" command

Go back in the packet history, works much like the page history in current web browsers.

6.8.2. The "Go Forward" command

Go forward in the packet history, works much like the page history in current web browsers.

6.8.3. The "Go to Packet" dialog box

Figure 6.10. The "Go To Packet" dialog box

This dialog box will let you enter a packet number. When you press OK, Wireshark will jump to that
packet.

6.8.4. The "Go to Corresponding Packet" command

If a protocol field is selected which points to another packet in the capture file, this command will jump
to that packet.

Note!
As these protocol fields now work like links (just as in your Web browser), it's easier to
simply double-click on the field to jump to the corresponding field.

6.8.5. The "Go to First Packet" command

This command will simply jump to the first packet displayed.

6.8.6. The "Go to Last Packet" command

This command will simply jump to the last packet displayed.

125
 Working with captured packets

6.9. Marking packets

You can mark packets in the "Packet List" pane. A marked packet will be shown with black background,
regardless of the coloring rules set. Marking a packet can be useful to find it later while analyzing in a
large capture file.

Warning!
The packet marks are not stored in the capture file or anywhere else, so all packet marks
will be lost if you close the capture file.

You can use packet marking to control the output of packets when saving/exporting/printing. To do so,
an option in the packet range is available, see Section 5.8, “The Packet Range frame”.

There are three functions to manipulate the marked state of a packet:

• Mark packet (toggle) toggles the marked state of a single packet.

• Mark all packets set the mark state of all packets.

• Unmark all packets reset the mark state of all packets.

These mark function are available from the "Edit" menu, and the "Mark packet (toggle)" function is also
available from the pop-up menu of the "Packet List" pane.

126
 Working with captured packets

6.10. Time display formats and time references

While packets are captured, each packet is timestamped. These timestamps will be saved to the capture
file, so they will be available for later analysis.

A detailed description of timestamps, timezones and alike can be found at: Section 7.3, “Time Stamps”.

The timestamp presentation format and the precision in the packet list can be chosen using the View
menu, see Figure 3.5, “The "View" Menu”.

The available presentation formats are:

• Date and Time of Day: 1970-01-01 01:02:03.123456 The absolute date and time of the day when
the packet was captured.

• Time of Day: 01:02:03.123456 The absolute time of the day when the packet was captured.

• Seconds Since Beginning of Capture: 123.123456 The time relative to the start of the capture file
or the first "Time Reference" before this packet (see Section 6.10.1, “Packet time referencing”).

• Seconds Since Previous Packet: 1.123456 The time relative to the previous packet.

The available precisions (aka. the number of displayed decimal places) are:

• Automatic The timestamp precision of the loaded capture file format will be used (the default).

• Seconds, Deciseconds, Centiseconds, Milliseconds, Microseconds or Nanoseconds The

timestamp precision will be forced to the given setting. If the actually available precision is smaller,
zeros will be appended. If the precision is larger, the remaining decimal places will be cut off.

Precision example: If you have a timestamp and it's displayed using, "Seconds Since Previous Packet", :
the value might be 1.123456. This will be displayed using the "Automatic" setting for libpcap files
(which is microseconds). If you use Seconds it would show simply 1 and if you use Nanoseconds it
shows 1.123456000.

6.10.1. Packet time referencing

The user can set time references to packets. A time reference is the starting point for all subsequent
packet time calculations. It will be useful, if you want to see the time values relative to a special packet,
e.g. the start of a new request. It's possible to set multiple time references in the capture file.

Warning!
The time references will not be saved permanently and will be lost when you close the cap-
ture file.

Note!
Time referencing will only be useful, if the time display format is set to "Seconds Since
Beginning of Capture". If one of the other time display formats are used, time referencing
will have no effect (and will make no sense either).

127
 Working with captured packets

To work with time references, choose one of the "Time Reference" items in the "Edit" menu , see Sec-
tion 3.6, “The "Edit" menu”, or from the pop-up menu of the "Packet List" pane.

• Set Time Reference (toggle) Toggles the time reference state of the currently selected packet to on
or off.

• Find Next Find the next time referenced packet in the "Packet List" pane.

• Find Previous Find the previous time referenced packet in the "Packet List" pane.

Figure 6.11. Wireshark showing a time referenced packet

A time referenced packet will be marked with the string *REF* in the Time column (see packet number
10). All subsequent packets will show the time since the last time reference.

128
Working with captured packets

129
Chapter 7. Advanced Topics
7.1. Introduction
In this chapter some of the advanced features of Wireshark will be described.

130
 Advanced Topics

7.2. Following TCP streams

If you are working with TCP based protocols it can be very helpful to see the data from a TCP stream in
the way that the application layer sees it. Perhaps you are looking for passwords in a Telnet stream, or
you are trying to make sense of a data stream. Maybe you just need a display filter to show only the
packets of that TCP stream. If so, Wireshark's ability to follow a TCP stream will be useful to you.

Simply select a TCP packet in the packet list of the stream/connection you are interested in and then se-
lect the Follow TCP Stream menu item from the Wireshark Tools menu (or use the context menu in the
packet list). Wireshark will set an appropriate display filter and pop up a dialog box with all the data
from the TCP stream laid out in order, as shown in Figure 7.1, “The "Follow TCP Stream" dialog box”.

Note!
It is worthwhile noting that Follow TCP Stream installs a display filter to select all the
packets in the TCP stream you have selected.

7.2.1. The "Follow TCP Stream" dialog box

Figure 7.1. The "Follow TCP Stream" dialog box

The stream content is displayed in the same sequence as it appeared on the network. Traffic from A to B

131
 Advanced Topics

is marked in red, while traffic from B to A is marked in blue. If you like, you can change these colors in
the Edit/Preferences "Colors" page.

Non-printable characters will be replaced by dots. XXX - What about line wrapping (maximum line
length) and CRNL conversions?

The stream content won't be updated while doing a live capture. To get the latest content you'll have to
reopen the dialog.

You can choose from the following actions:

1. Save As Save the stream data in the currently selected format.

2. Print Print the stream data in the currently selected format.

3. Direction Choose the stream direction to be displayed ("Entire conversation", "data from A to B
only" or "data from B to A only").

4. Filter out this stream Apply a display filter removing the current TCP stream data from the dis-
play.

5. Close Close this dialog box, leaving the current display filter in effect.

You can choose to view the data in one of the following formats:

1. ASCII. In this view you see the data from each direction in ASCII. Obviously best for ASCII based
protocols, e.g. HTTP.

2. EBCDIC. For the big-iron freaks out there.

3. HEX Dump. This allows you to see all the data. This will require a lot of screen space and is best
used with binary protocols.

4. C Arrays. This allows you to import the stream data into your own C program.

5. Raw. This allows you to load the unaltered stream data into a different program for further examin-
ation. The display will look the same as the ASCII setting, but "Save As" will result in a binary file.

132
 Advanced Topics

7.3. Time Stamps

Time stamps, their precisions and all that can be quite confusing. This section will provide you with in-
formation about what's going on while Wireshark processes time stamps.

While packets are captured, each packet is time stamped as it comes in. These time stamps will be saved
to the capture file, so they also will be available for (later) analysis.

So where do these time stamps come from? While capturing, Wireshark gets the time stamps from the
libpcap (WinPcap) library, which in turn gets them from the operating system kernel. If the capture data
is loaded from a capture file, Wireshark obviously gets the data from that file.

7.3.1. Wireshark internals

The internal format that Wireshark uses to keep a packet time stamp consists of the date (in days since
1.1.1970) and the time of day (in nanoseconds since midnight). You can adjust the way Wireshark dis-
plays the time stamp data in the packet list, see the "Time Display Format" item in the Section 3.7, “The
"View" menu” for details.

While reading or writing capture files, Wireshark converts the time stamp data between the capture file
format and the internal format as required.

While capturing, Wireshark uses the libpcap (WinPcap) capture library which supports microsecond res-
olution. Unless you are working with specialized capturing hardware, this resolution should be adequate.

7.3.2. Capture file formats

Every capture file format that Wireshark knows support time stamps. The time stamp precision suppor-
ted by a specific capture file format differs widely and varies from one second "0" to one nanosecond
"0.123456789". Most file formats store the time stamps with a fixed precision (e.g. microseconds),
while some file formats are even capable to store the time stamp precision itself (whatever the benefit
may be).

The common libpcap capture file format that is used by Wireshark (and a lot of other tools) supports a
fixed microsecond resolution "0.123456" only.

Note!
Writing data into a capture file format that doesn't provide the capability to store the actual
precision will lead to loss of information. Example: If you load a capture file with nano-
second resolution and store the capture data to a libpcap file (with microsecond resolution)
Wireshark obviously must reduce the precision from nanosecond to microsecond.

7.3.3. Accuracy
It's often asked: "Which time stamp accuracy is provided by Wireshark?". Well, Wireshark doesn't cre-
ate any time stamps itself but simply gets them from "somewhere else" and displays them. So accuracy
will depend on the capture system (operating system, performance, ...) that you use. Because of this, the
above question is difficult to answer in a general way.

Note!
USB connected network adapters often provide a very bad time stamp accuracy. The in-
coming packets have to take "a long and winding road" to travel through the USB cable

133
 Advanced Topics

until they actually reach the kernel. As the incoming packets are time stamped when they
are processed by the kernel, this time stamping mechanism becomes very inaccurate.

Conclusion: don't use USB connected NIC's when you need precise time stamp accuracy!
(XXX - are there any such NIC's that stamps already on the USB hardware?)

134
 Advanced Topics

7.4. Time Zones

If you travel across the planet, time zones can be confusing. If you get a capture file from somewhere
around the world time zones can even be a lot more confusing ;-)

First of all, there are two reasons why you may not need to think about time zones at all:

• You are only interested in the time differences between the packet time stamps and don't need to
know the exact date and time of the captured packets (which is often the case).

• You don't get capture files from different time zones than your own, so there are simply no time
zone problems. For example: everyone in your team is working in the same time zone than yourself.

What are time zones?

People expect that the time reflects the sunset. Dawn should be in the morning maybe around
06:00 and dusk in the evening maybe at 20:00. These times will obviously vary depending on the
season. It would be very confusing if everyone on earth would use the same global time as this
would correspond to the sunset only at a small part of the world.

For that reason, the earth is split into several different time zones, each zone with a local time that
corresponds to the local sunset.

The time zone's base time is UTC (Coordinated Universal Time) or Zulu Time (military and avi-
ation). The older term GMT (Greenwich Mean Time) shouldn't be used as it is slightly incorrect
(up to 0.9 seconds difference to UTC). The UTC base time equals to 0 (based at Greenwich, Eng-
land) and all time zones have an offset to UTC between -12 to +14 hours!

For example: If you live in Berlin you are in a time zone one hour earlier than UTC, so you are in
time zone "+1" (time difference in hours compared to UTC). If it's 3 o'clock in Berlin it's 2 o'clock
in UTC "at the same moment".

Be aware that at a few places on earth don't use time zones with even hour offsets (e.g. New Delhi
uses UTC+05:30)!

Further information can be found at: http://en.wikipedia.org/wiki/Time_zone and ht-

tp://en.wikipedia.org/wiki/Coordinated_Universal_Time.

What is daylight saving time (DST)?

Daylight Saving Time (DST), also known as Summer Time, is intended to "save" some daylight
during the summer months. To do this, a lot of countries (but not all!) add an DST hour to the
already existing UTC offset. So you may need to take another hour (or in very rare cases even two
hours!) difference into your "time zone calculations".

Unfortunately, the date at which DST actually takes effect is different throughout the world. You
may also note, that the northern and southern hemispheres have opposite DST's (e.g. while it's
summer in Europe it's winter in Australia).

Keep in mind: UTC remains the same all year around, regardless of DST!

Further information can be found at: http://en.wikipedia.org/wiki/Daylight_saving.

135
 Advanced Topics

Further time zone and DST information can be found at: http://wwp.greenwichmeantime.com/ and ht-
tp://www.timeanddate.com/worldclock/.

7.4.1. Set your computer's time correct!

If you work with people around the world, it's very helpful to set your computer's time and time zone
right.

You should set your computers time and time zone in the correct sequence:

1. Set your time zone to your current location

2. Set your computer's clock to the local time

This way you will tell your computer both the local time and also the time offset to UTC.

Tip!
If you travel around the world, it's an often made mistake to adjust the hours of your com-
puter clock to the local time. Don't adjust the hours but your time zone setting instead! For
your computer, the time is essentially the same as before, you are simply in a different time
zone with a different local time!

Tip!
You can use the Network Time Protocol (NTP) to automatically adjust your computer to
the correct time, by synchronizing it to Internet NTP clock servers. NTP clients are avail-
able for all operating systems that Wireshark supports (and for a lot more), for examples
see: http://www.ntp.org/.

7.4.2. Wireshark and Time Zones

So what's the relationship between Wireshark and time zones anyway?

Wireshark's native capture file format (libpcap format), and some other capture file formats, such as the
Windows Sniffer, EtherPeek, AiroPeek, and Sun snoop formats, save the arrival time of packets as UTC
values. UN*X systems, and "Windows NT based" systems (Windows NT 4.0, Windows 2000, Windows
XP, Windows Server 2003, Windows Vista) represent time internally as UTC. When Wireshark is cap-
turing, no conversion is necessary. However, if the system time zone is not set correctly, the system's
UTC time might not be correctly set even if the system clock appears to display correct local time. "Win-
dows 9x based" systems (Windows 95, Windows 98, Windows Me) represent time internally as local
time. When capturing, WinPcap has to convert the time to UTC before supplying it to Wireshark. If the
system's time zone is not set correctly, that conversion will not be done correctly.

Other capture file formats, such as the Microsoft Network Monitor, DOS-based Sniffer, and Network In-
struments Observer formats, save the arrival time of packets as local time values.

Internally to Wireshark, time stamps are represented in UTC; this means that, when reading capture files
that save the arrival time of packets as local time values, Wireshark must convert those local time values
to UTC values.

Wireshark in turn will display the time stamps always in local time. The displaying computer will con-
vert them from UTC to local time and displays this (local) time. For capture files saving the arrival time
of packets as UTC values, this means that the arrival time will be displayed as the local time in your

136
 Advanced Topics

time zone, which might not be the same as the arrival time in the time zone in which the packet was cap-
tured. For capture files saving the arrival time of packets as local time values, the conversion to UTC
will be done using your time zone's offset from UTC and DST rules, which means the conversion will
not be done correctly; the conversion back to local time for display might undo this correctly, in which
case the arrival time will be displayed as the arrival time in which the packet was captured.

Table 7.1. Time zone examples for UTC arrival times (without DST)
Los Angeles New York Madrid London Berlin Tokyo
Capture File 10:00 10:00 10:00 10:00 10:00 10:00
(UTC)
Local Offset -8 -5 -1 0 +1 +9
to UTC
Displayed 02:00 05:00 09:00 10:00 11:00 19:00
Time (Local
Time)

An example: Let's assume that someone in Los Angeles captured a packet with Wireshark at exactly 2
o'clock local time and sends you this capture file. The capture file's time stamp will be represented in
UTC as 10 o'clock. You are located in Berlin and will see 11 o'clock on your Wireshark display.

Now you have a phone call, video conference or Internet meeting with that one to talk about that capture
file. As you are both looking at the displayed time on your local computers, the one in Los Angeles still
sees 2 o'clock but you in Berlin will see 11 o'clock. The time displays are different as both Wireshark
displays will show the (different) local times at the same point in time.

Conclusion: You may not bother about the date/time of the time stamp you currently look at, unless you
must make sure that the date/time is as expected. So, if you get a capture file from a different time zone
and/or DST, you'll have to find out the time zone/DST difference between the two local times and "men-
tally adjust" the time stamps accordingly. In any case, make sure that every computer in question has the
correct time and time zone setting.

137
 Advanced Topics

7.5. Packet Reassembling

7.5.1. What is it?
Network protocols often need to transport large chunks of data, which are complete in itself, e.g. when
transferring a file. The underlying protocol might not be able to handle that chunk size (e.g. limitation of
the network packet size), or is stream-based like TCP, which doesn't know data chunks at all.

In that case the network protocol has to handle that chunk boundaries itself and (if required) spreading
the data over multiple packets. It obviously also needs a mechanism to find back the chunk boundaries
on the receiving side.

Tip!
Wireshark calls this mechanism reassembling, although a specific protocol specification
might use a different term for this (e.g. desegmentation, defragmentation, ...).

7.5.2. How Wireshark handles it

For some of the network protocols Wireshark knows of, a mechanism is implemented to find, decode
and display these chunks of data. Wireshark will try to find the corresponding packets of this chunk, and
will show the combined data as additional pages in the "Packet Bytes" pane (for information about this
pane, see Section 3.17, “The "Packet Bytes" pane”).

Figure 7.2. The "Packet Bytes" pane with a reassembled tab

Note!
Reassembling might take place at several protocol layers, so it's possible that multiple tabs
in the "Packet Bytes" pane appear.

Note!
You will find the reassembled data in the last packet of the chunk.

An example: In a HTTP GET response, the requested data (e.g. a HTML page) is returned. Wireshark
will show the hex dump of the data in a new tab "Uncompressed entity body" in the "Packet Bytes"
pane.

Reassembling is enabled in the preferences by default. The defaults were changed from disabled to en-
abled in September 2005. If you created your preference settings before this date, you might look if reas-
sembling is actually enabled, as it can be extremely helpful while analyzing network packets.

The enabling or disabling of the reassemble settings of a protocol typically requires two things:

138
 Advanced Topics

1. the lower level protocol (e.g., TCP) must support reassembly. Often this reassembly can be enabled
or disabled via the protocol preferences.

2. the higher level protocol (e.g., HTTP) must use the reassembly mechanism to reassemble fragmen-
ted protocol data. This too can often be enabled or disabled via the protocol preferences.

The tooltip of the higher level protocol setting will notify you if and which lower level protocol setting
has to be considered too.

139
 Advanced Topics

7.6. Name Resolution

Name resolution tries to resolve some of the numerical address values into a human readable format.
There are two possible ways to do these conversations, depending on the resolution to be done: calling
system/network services (like the gethostname function) and/or evaluate from Wireshark specific con-
figuration files. For details about the configuration files Wireshark uses for name resolution and alike,
see Appendix A, Files and Folders.

The name resolution feature can be en-/disabled separately for the protocol layers of the following sec-
tions.

7.6.1. Name Resolution drawbacks

Name resolution can be invaluable while working with Wireshark and may even save you hours of
work. Unfortunately, it also has it's drawbacks.

• Name resolution will often fail. The name to be resolved might simply be unknown by the name
servers asked or the servers are just not available and the name is also not found in Wireshark's con-
figuration files.

• The resolved names are not stored in the capture file or somewhere else. So the resolved names
might not be available if you open the capture file later or on a different machine. Each time you
open a capture file it may look "slightly different", maybe simply because you can't connect to a
name server (which you could connect before).

• DNS may add additional packets to your capture file. You may see packets to/from your machine
in your capture file, which are caused by name resolution network services of the machine Wire-
shark captures from. XXX - are there any other such packets than DNS ones?

• Resolved DNS names are cached by Wireshark. This is required for acceptable performance.
However, if the name resolution information should change while Wireshark is running, Wireshark
won't notice a change to the name resolution information once it's get cached. If this information
changes while Wireshark is running, e.g. a new DHCP lease takes effect, Wireshark won't notice it.
XXX - is this true for all or only for DNS info?

Tip!
The name resolution in the packet list is done while the list is filled. If a name could be re-
solved after a packet was added to the list, that former entry won't be changed. As the
name resolution results are cached, you can use "View/Reload" to rebuild the packet list,
this time with the correctly resolved names. However, this isn't possible while a capture is
in progress.

7.6.2. Ethernet name resolution (MAC layer)

Try to resolve an Ethernet MAC address (e.g. 00:09:5b:01:02:03) to something more "human readable".

ARP name resolution (system service) Wireshark will ask the operating system to convert an Ethernet
address to the corresponding IP address (e.g. 00:09:5b:01:02:03 -> 192.168.0.1).

Ethernet codes (ethers file) If the ARP name resolution failed, Wireshark tries to convert the Ethernet
address to a known device name, which has been assigned by the user using an ethers file (e.g.
00:09:5b:01:02:03 -> homerouter).

140
 Advanced Topics

Ethernet manufacturer codes (manuf file) If both ARP and ethers didn't returned a result, Wireshark
tries to convert the first 3 bytes of an ethernet address to an abbreviated manufacturer name, which has
been assigned by the IEC (e.g. 00:09:5b:01:02:03 -> Netgear_01:02:03).

7.6.3. IP name resolution (network layer)

Try to resolve an IP address (e.g. 216.239.37.99) to something more "human readable".

DNS/ADNS name resolution (system/library service) Wireshark will ask the operating system (or the
ADNS library), to convert an IP address to the hostname associated with it (e.g. 216.239.37.99 ->
www.1.google.com). The DNS service is using synchronous calls to the DNS server. So Wireshark will
stop responding until a response to a DNS request is returned. If possible, you might consider using the
ADNS library (which won't wait for a network response).

Warning!
Enabling network name resolution when your name server is unavailable may significantly
slow down Wireshark while it waits for all of the name server requests to time out. Use
ADNS in that case.

DNS vs. ADNS here's a short comparison: Both mechanisms are used to convert an IP address to some
human readable (domain) name. The usual DNS call gethostname() will try to convert the address to a
name. To do this, it will first ask the systems hosts file (e.g. /etc/hosts) if it finds a matching entry. If that
fails, it will ask the configured DNS server(s) about the name.

So the real difference between DNS and ADNS comes when the system has to wait for the DNS server
about a name resolution. The system call gethostname() will wait until a name is resolved or an error oc-
curs. If the DNS server is unavailable, this might take quite a while (several seconds). The ADNS ser-
vice will work a bit differently. It will also ask the DNS server, but it won't wait for the answer. It will
just return to Wireshark in a very short amount of time. The actual (and the following) address fields
won't show the resolved name until the ADNS call returned. As mentioned above, the values get cached,
so you can use View/Reload to "update" these fields to show the resolved values.

hosts name resolution (hosts file) If DNS name resolution failed, Wireshark will try to convert an IP
address to the hostname associated with it, using a hosts file provided by the user (e.g. 216.239.37.99 ->
www.google.com).

7.6.4. IPX name resolution (network layer)

ipxnet name resolution (ipxnets file) XXX - add ipxnets name resolution explanation.

7.6.5. TCP/UDP port name resolution (transport layer)

Try to resolve a TCP/UDP port (e.g. 80) to something more "human readable".

TCP/UDP port conversion (system service) Wireshark will ask the operating system to convert a TCP
or UDP port to its well known name (e.g. 80 -> http).

XXX - mention the role of the /etc/services file (but don't forget the files and folders section)!

141
 Advanced Topics

7.7. Checksums
Several network protocols use checksums to ensure data integrity.

Tip!
Applying checksums as described here is also known as redundancy check.

What are checksums for?

Checksums are used to ensure the integrity of data portions for data transmission or storage. A
checksum is basically a calculated summary of such a data portion.

Network data transmissions often produce errors, such as toggled, missing or duplicated bits. As a
result, the data received might not be identical to the data transmitted, which is obviously a bad
thing.

Because of these transmission errors, network protocols very often use checksums to detect such
errors. The transmitter will calculate a checksum of the data and transmits the data together with
the checksum. The receiver will calculate the checksum of the received data with the same al-
gorithm as the transmitter. If the received and calculated checksums don't match a transmission
error has occured.

Some checksum algorithms are able to recover (simple) errors by calculating where the expected
error must be and repairing it.

If there are errors that cannot be recovered, the receiving side throws away the packet. Depending
on the network protocol, this data loss is simply ignored or the sending side needs to detect this
loss somehow and retransmits the required packet(s).

Using a checksum drastically reduces the number of undetected transmission errors. However, the
usual checksum algorithms cannot guarantee an error detection of 100%, so a very small number
of transmission errors may remain undetected.

There are several different kinds of checksum algorithms, an example of an often used checksum
algorithm is CRC32. The checksum algorithm actually chosen for a specific network protocol will
depend on the expected error rate of the network medium, the importance of error detection, the
processor load to perform the calculation, the performance needed and many other things.

Further information about checksums can be found at: http://en.wikipedia.org/wiki/Checksum.

7.7.1. Wireshark checksum validation

Wireshark will validate the checksums of several protocols, e.g.: IP, TCP, ...

It will do the same calculation as a "normal receiver" would do, and shows the checksum fields in the
packet details with a comment, e.g.: [correct], [invalid, must be 0x12345678] or alike.

Checksum validation can be switched off for various protocols in the Wireshark protocol preferences,
e.g. to (very slightly) increase performance.

If the checksum validation is enabled and it detected an invalid checksum, features like packet reas-
sembling won't be processed. This is avoided as incorrect connection data could "confuse" the internal
database.

142
 Advanced Topics

7.7.2. Checksum offloading

The checksum calculation might be done by the network driver, protocol driver or even in hardware.

For example: The Ethernet transmitting hardware calculates the Ethernet CRC32 checksum and the re-
ceiving hardware validates this checksum. If the received checksum is wrong Wireshark won't even see
the packet, as the Ethernet hardware internally throws away the packet.

Higher level checksums are "traditionally" calculated by the protocol implementation and the completed
packet is then handed over to the hardware.

Recent network hardware can perform advanced features such as IP checksum calculation, also known
as checksum offloading. The network driver won't calculate the checksum itself but simply hand over an
empty (zero or garbage filled) checksum field to the hardware.

Note!
Checksum offloading often causes confusion as the network packets to be transmitted are
handed over to Wireshark before the checksums are actually calculated. Wireshark gets
these "empty" checksums and displays them as invalid, even though the packets will con-
tain valid checksums when they leave the network hardware later.

Checksum offloading can be confusing and having a lot of [invalid] messages on the screen can be quite
annoying. As mentioned above, invalid checksums may lead to unreassembled packets, making the ana-
lysis of the packet data much harder.

You can do two things to avoid this checksum offloading problem:

• Turn off the checksum offloading in the network driver, if this option is available.

• Turn off checksum validation of the specific protocol in the Wireshark preferences.

143
Advanced Topics

144
Chapter 8. Statistics
8.1. Introduction
Wireshark provides a wide range of network statistics.

These statistics range from general information about the loaded capture file (like the number of cap-
tured packets), to statistics about specific protocols (e.g. statistics about the number of HTTP requests
and responses captured).

• General statistics:

• Summary about the capture file.

• Protocol Hierarchy of the captured packets.

• Endpoints e.g. traffic to and from an IP addresses.

• Conversations e.g. traffic between specific IP addresses.

• IO Graphs visualizing the number of packets (or similar) in time.

• Protocol specific statistics:

• Service Response Time between request and response of some protocols.

• Various other protocol specific statistics.

Note!
The protocol specific statistics requires detailed knowledge about the specific protocol.
Unless you are familiar with that protocol, statistics about it will be pretty hard to under-
stand.

145
 Statistics

8.2. The "Summary" window

General statistics about the current capture file.

Figure 8.1. The "Summary" window

146
 Statistics

• File general information about the capture file.

• Time the timestamps when the first and the last packet were capturing (and the time between them).

147
 Statistics

• Capture information from the time when the capture was done (only available if the packet data was
captured from the network and not loaded from a file).

• Display some display related information.

• Traffic some statistics of the network traffic seen. If a display filter is set, you will see values in
both columns. The values in the Captured column will remain the same as before, while the values
in the Displayed column will reflect the values corresponding to the packets shown in the display.

148
 Statistics

8.3. The "Protocol Hierarchy" window

The protocol hierarchy of the captured packets.

Figure 8.2. The "Protocol Hierarchy" window

This is a tree of all the protocols in the capture. You can collapse or expand subtrees, by clicking on the
plus / minus icons. By default, all trees are expanded.

Each row contains the statistical values of one protocol.

The following columns containing the statistical values are available:

• Protocol this protocol's name

• % Packets the percentage of protocol packets, relative to all packets in the capture

• Packets the absolute number of packets of this protocol

• Bytes the absolute number of bytes of this protocol

• MBit/s the bandwidth of this protocol, relative to the capture time

• End Packets the absolute number of packets of this protocol (where this protocol were the highest
protocol to decode)

149
 Statistics

• End Bytes the absolute number of bytes of this protocol (where this protocol were the highest pro-
tocol to decode)

• End MBit/s the bandwidth of this protocol, relative to the capture time (where this protocol were the
highest protocol to decode)

Note!
Packets will usually contain multiple protocols, so more than one protocol will be counted
for each packet. Example: In the screenshot IP has 99,17% and TCP 85,83% (which is to-
gether much more than 100%).

Note!
Protocol layers can consist of packets that won't contain any higher layer protocol, so the
sum of all higher layer packets may not sum up to the protocols packet count. Example: In
the screenshot TCP has 85,83% but the sum of the subprotocols (HTTP, ...) is much less.
This may be caused by TCP protocol overhead, e.g. TCP ACK packets won't be counted as
packets of the higher layer).

Note!
A single packet can contain the same protocol more than once. In this case, the protocol is
counted more than once. For example: in some tunneling configurations the IP layer can
appear twice.

150
 Statistics

8.4. Endpoints
Statistics of the endpoints captured.

Tip!
If you are looking for a feature other network tools call a hostlist, here is the right place to
look. The list of Ethernet or IP endpoints is usually what you're looking for.

8.4.1. What is an Endpoint?

A network endpoint is the logical endpoint of separate protocol traffic of a specific protocol layer. The
endpoint statistics of Wireshark will take the following endpoints into account:

• Ethernet an Ethernet endpoint is identical to the Ethernet's MAC address.

• Fibre Channel XXX - insert info here.

• FDDI a FDDI endpoint is identical to the FDDI MAC address.

• IPv4 an IP endpoint is identical to its IP address.

• IPX XXX - insert info here.

• TCP a TCP endpoint is a combination of the IP address and the TCP port used, so different TCP
ports on the same IP address are different TCP endpoints.

• Token Ring a Token Ring endpoint is identical to the Token Ring MAC address.

• UDP a UDP endpoint is a combination of the IP address and the UDP port used, so different UDP
ports on the same IP address are different UDP endpoints.

Broadcast / multicast endpoints

Broadcast / multicast traffic will be shown separately as additional endpoints. Of course, as
these endpoints are virtual endpoints, the real traffic will be received by all (multicast:
some) of the listed unicast endpoints.

8.4.2. The "Endpoints" window

This window shows statistics about the endpoints captured.

Figure 8.3. The "Endpoints" window

151
 Statistics

For each supported protocol, a tab is shown in this window. The tab labels shows the number of end-
points captured (e.g. the tab label "Ethernet: 5" tells you that five ethernet endpoints have been cap-
tured). If no endpoints of a specific protocol were captured, the tab label will be grayed out (although the
related page can still be selected).

Each row in the list shows the statistical values for exactly one endpoint.

Name resolution will be done if selected in the window and if it is active for the specific protocol layer
(MAC layer for the selected Ethernet endpoints page). As you might have noticed, the first row has a
name resolution of the first three bytes "Netgear", the second row's address was resolved to an IP ad-
dress (using ARP) and the third was resolved to a broadcast (unresolved this would still be:
ff:ff:ff:ff:ff:ff), the last two Ethernet addresses remain unresolved.

Tip!
This window will be updated frequently, so it will be useful, even if you open it before (or
while) you are doing a live capture.

8.4.3. The protocol specific "Endpoint List" windows

Before the combined window described above was available, each of its pages were shown as separate
windows. Even though the combined window is much more convenient to use, these separate windows
are still available. The main reason is, they might process faster for very large capture files. However, as
the functionality is exactly the same as in the combined window, they won't be discussed in detail here.

152
 Statistics

8.5. Conversations
Statistics of the captured conversations.

8.5.1. What is a Conversation?

A network conversation is the traffic between two specific endpoints. For example, an IP conversation is
all the traffic between two IP addresses. The description of the known endpoint types can be found in
Section 8.4.1, “What is an Endpoint?”.

8.5.2. The "Conversations" window

Beside the list content, the conversations window work the same way as the endpoint ones, see Sec-
tion 8.4.2, “The "Endpoints" window” for a description how it works.

Figure 8.4. The "Conversations" window

8.5.3. The protocol specific "Conversation List" windows

Before the combined window described above was available, each of its pages were shown as separate
windows. Even though the combined window is much more convenient to use, these separate windows
are still available. The main reason is, they might process faster for very large capture files. However, as
the functionality is exactly the same as in the combined window, they won't be discussed in detail here.

153
 Statistics

8.6. The "IO Graphs" window

User configurable graph of the captured network packets.

You can define up to five differently colored graphs.

Figure 8.5. The "IO Graphs" window

The user can configure the following things:

• Graphs

• Graph 1-5 enable the graph 1-5 (only graph 1 is enabled by default)

• Color the color of the graph (cannot be changed)

• Filter: a display filter for this graph (only the packets that pass this filter will be taken into ac-
count for that graph)

• Style: the style of the graph (Line/Impulse/FBar)

• X Axis

154
 Statistics

• Tick interval an interval in x direction lasts (10/1/0.1/0.01/0.001 seconds)

• Pixels per tick use 10/5/2/1 pixels per tick interval

• Y Axis

• Unit the unit for the y direction (Packets/Tick, Bytes/Tick, Advanced...)

• Scale the scale for the y unit (10,20,50,100,200,500,...)

XXX - describe the Advanced feature.

155
 Statistics

8.7. Service Response Time

The service response time is the time between a request and the corresponding response. This informa-
tion is available for many protocols.

Service response time statistics are currently available for the following protocols:

• DCE-RPC

• Fibre Channel

• H.225 RAS

• LDAP

• MGCP

• ONC-RPC

• SMB

As an example, the DCE-RPC service response time is described in more detail.

Note!
The other Service Response Time windows will work the same way (or only slightly dif-
ferent) compared to the following description.

8.7.1. The "Service Response Time DCE-RPC" window

The service response time of DCE-RPC is the time between the request and the corresponding response.

First of all, you have to select the DCE-RPC interface:

Figure 8.6. The "Compute DCE-RPC statistics" window

156
 Statistics

You can optionally set a display filter, to reduce the amount of packets.

Figure 8.7. The "DCE-RPC Statistic for ..." window

Each row corresponds to a method of the interface selected (so the EPM interface in version 3 has 7
methods). For each method the number of calls, and the statistics of the SRT time is calculated.

157
 Statistics

8.8. The protocol specific statistics windows

The protocol specific statistics windows display detailed information of specific protocols and might be
described in a later version of this document.

Some of these statistics are described at the http://wiki.wireshark.org/Statistics pages.

158
Statistics

159
Chapter 9. Customizing Wireshark
9.1. Introduction
Wireshark's default behaviour will usually suit your needs pretty well. However, as you become more
familiar with Wireshark, it can be customized in various ways to suit your needs even better. In this
chapter we explore:

• How to start Wireshark with command line parameters

• How to colorize the packet list

• How to control protocol dissection

• How to use the various preference settings

160
 Customizing Wireshark

9.2. Start Wireshark from the command line

You can start Wireshark from the command line, but it can also be started from most Window managers
as well. In this section we will look at starting it from the command line.

Wireshark supports a large number of command line parameters. To see what they are, simply enter the
command wireshark -h and the help information shown in Example 9.1, “Help information available
from Wireshark” (or something similar) should be printed.

Example 9.1. Help information available from Wireshark

Version 0.99.0
Copyright 1998-2006 Gerald Combs <[email protected]> and contributors.
Compiled with GTK+ 2.6.9, with GLib 2.6.6, with WinPcap (version unknown),
with libz 1.2.3, with libpcre 6.4, with Net-SNMP 5.2.2, with ADNS, with Lua 5.1.
Running with WinPcap version 3.1 (packet.dll version 3, 1, 0, 27), based on
libpcap version 0.9[.x] on Windows XP Service Pack 2, build 2600.
wireshark [ -vh ] [ -DklLnpQS ] [ -a <capture autostop condition> ] ...
[ -b <capture ring buffer option> ] ...
[ -B <capture buffer size> ]
[ -c <capture packet count> ] [ -f <capture filter> ]
[ -g <packet number> ] [ -i <capture interface> ] [ -m <font> ]
[ -N <name resolving flags> ] [ -o <preference/recent setting> ] ...
[ -r <infile> ] [ -R <read (display) filter> ] [ -s <capture snaplen> ]
[ -t <time stamp format> ] [ -w <savefile> ] [ -y <capture link type> ]
[ -X <eXtension option> ] [ -z <statistics> ] [ <infile> ]

We will examine each of the command line options in turn.

The first thing to notice is that issuing the command wireshark by itself will bring up Wireshark.
However, you can include as many of the command line parameters as you like. Their meanings are as
follows ( in alphabetical order ): XXX - is the alphabetical order a good choice? Maybe better task
based?

-a <capture autostop condition> Specify a criterion that specifies when Wireshark is to stop writ-
ing to a capture file. The criterion is of the form test:value, where
test is one of:

duration:value Stop writing to a capture file after value of

seconds have elapsed.

filesize:value Stop writing to a capture file after it

reaches a size of value kilobytes (where a
kilobyte is 1000 bytes, not 1024 bytes). If
this option is used together with the -b op-
tion, Wireshark will stop writing to the
current capture file and switch to the next
one if filesize is reached.

files:value Stop writing to capture files after value

number of files were written.

161
 Customizing Wireshark

-b <capture ring buffer option> If a maximum capture file size was specified, cause Wireshark to
run in "ring buffer" mode, with the specified number of files. In
"ring buffer" mode, Wireshark will write to several capture files.
Their name is based on the number of the file and on the creation
date and time.

When the first capture file fills up, Wireshark will switch to writ-
ing to the next file, until it fills up the last file, at which point it'll
discard the data in the first file (unless 0 is specified, in which
case, the number of files is unlimited) and start writing to that file
and so on.

If the optional duration is specified, Wireshark will switch also to

the next file when the specified number of seconds has elapsed
even if the current file is not completely fills up.

duration:value Switch to the next file after value seconds

have elapsed, even if the current file is not
completely filled up.

filesize:value Switch to the next file after it reaches a

size of value kilobytes (where a kilobyte is
1000 bytes, not 1024 bytes).

files:value Begin again with the first file after value

number of files were written (form a ring
buffer).

-B <capture buffer size (Win32 Win32 only: set capture buffer size (in MB, default is 1MB). This
only)> is used by the the capture driver to buffer packet data until that
data can be written to disk. If you encounter packet drops while
capturing, try to increase this size.

-c <capture packet count> This option specifies the maximum number of packets to capture
when capturing live data. It would be used in conjunction with the
-k option.

-D Print a list of the interfaces on which Wireshark can capture, and

exit. For each network interface, a number and an interface name,
possibly followed by a text description of the interface, is printed.
The interface name or the number can be supplied to the -i flag to
specify an interface on which to capture.

This can be useful on systems that don't have a command to list

them (e.g., Windows systems, or UNIX systems lacking ifconfig -
a); the number can be useful on Windows 2000 and later systems,
where the interface name is a somewhat complex string.

Note that "can capture" means that Wireshark was able to open
that device to do a live capture; if, on your system, a program do-
ing a network capture must be run from an account with special
privileges (for example, as root), then, if Wireshark is run with
the -D flag and is not run from such an account, it will not list any
interfaces.

-f <capture filter> This option sets the initial capture filter expression to be used
when capturing packets.

162
 Customizing Wireshark

-g <packet number> After reading in a capture file using the -r flag, go to the given
packet number.

-h The -h option requests Wireshark to print its version and usage in-
structions (as shown above) and exit.

-i <capture interface> Set the name of the network interface or pipe to use for live pack-
et capture.

Network interface names should match one of the names listed in

wireshark -D (described above); a number, as reported by wire-
shark -D, can also be used. If you're using UNIX, netstat -i or if-
config -a might also work to list interface names, although not all
versions of UNIX support the -a flag to ifconfig.

If no interface is specified, Wireshark searches the list of inter-

faces, choosing the first non-loopback interface if there are any
non-loopback interfaces, and choosing the first loopback interface
if there are no non-loopback interfaces; if there are no interfaces,
Wireshark reports an error and doesn't start the capture.

Pipe names should be either the name of a FIFO (named pipe) or

``-'' to read data from the standard input. Data read from pipes
must be in standard libpcap format.

-k The -k option specifies that Wireshark should start capturing

packets immediately. This option requires the use of the -i para-
meter to specify the interface that packet capture will occur from.

-l This option turns on automatic scrolling if the packet list pane is

being updated automatically as packets arrive during a capture (
as specified by the -S flag).

-L List the data link types supported by the interface and exit.

-m <font> This option sets the name of the font used for most text displayed
by Wireshark. XXX - add an example!

-n Disable network object name resolution (such as hostname, TCP

and UDP port names).

-N <name resolving flags> Turns on name resolving for particular types of addresses and port
numbers; the argument is a string that may contain the letters m to
enable MAC address resolution, n to enable network address res-
olution, and t to enable transport-layer port number resolution.
This overrides -n if both -N and -n are present. The letter C en-
ables concurrent (asynchronous) DNS lookups.

-o <preference/recent settings> Sets a preference or recent value, overriding the default value and
any value read from a preference/recent file. The argument to the
flag is a string of the form prefname:value, where prefname is the
name of the preference (which is the same name that would ap-
pear in the preference/recent file), and value is the value to which
it should be set. Multiple instances of -o <preference settings>
can be given on a single command line.

An example of setting a single preference would be:

wireshark -o mgcp.display_dissect_tree:TRUE

163
 Customizing Wireshark

An example of setting multiple preferences would be:

wireshark -o mgcp.display_dissect_tree:TRUE -o
mgcp.udp.callagent_port:2627

Tip!
You can get a list of all available preference strings
from the preferences file, see Appendix A, Files and
Folders.

-p Don't put the interface into promiscuous mode. Note that the in-
terface might be in promiscuous mode for some other reason;
hence, -p cannot be used to ensure that the only traffic that is cap-
tured is traffic sent to or from the machine on which Wireshark is
running, broadcast traffic, and multicast traffic to addresses re-
ceived by that machine.

-Q This option forces Wireshark to exit when capturing is complete.

It can be used with the -c option. It must be used in conjunction
with the -i and -w options.

-r <infile> This option provides the name of a capture file for Wireshark to
read and display. This capture file can be in one of the formats
Wireshark understands.

-R <read (display) filter> This option specifies a display filter to be applied when reading
packets from a capture file. The syntax of this filter is that of the
display filters discussed in Section 6.3, “Filtering packets while
viewing”. Packets not matching the filter are discarded.

-s <capture snaplen> This option specifies the snapshot length to use when capturing
packets. Wireshark will only capture <snaplen> bytes of data for
each packet.

-S This option specifies that Wireshark will display packets as it cap-

tures them. This is done by capturing in one process and display-
ing them in a separate process. This is the same as "Update list of
packets in real time" in the Capture Options dialog box.

-t <time stamp format> This option sets the format of packet timestamps that are dis-
played in the packet list window. The format can be one of:

• r relative, which specifies timestamps are displayed relative to

the first packet captured.

• a absolute, which specifies that actual times be displayed for

all packets.

• ad absolute with date, which specifies that actual dates and

times be displayed for all packets.

• d delta, which specifies that timestamps are relative to the pre-

vious packet.

• e epoch, which specifies that timestamps are seconds since

epoch (Jan 1, 1970 00:00:00)

164
 Customizing Wireshark

-v The -v option requests Wireshark to print out its version informa-

tion and exit.

-w <savefile> This option sets the name of the savefile to be used when saving a
capture file.

-y <capture link type> If a capture is started from the command line with -k, set the data
link type to use while capturing packets. The values reported by -
L are the values that can be used.

-X <eXtension option> Specify an option to be passed to a TShark module. The eXten-

sion option is in the form extension_key:value, where exten-
sion_key can be:

lua_script:lua_script_filename Tell Wireshark to load the given

script in addition to the default Lua scripts.

-z <statistics-string> Get Wireshark to collect various types of statistics and display the
result in a window that updates in semi-real time. XXX - add
more details here!

165
 Customizing Wireshark

9.3. Packet colorization

A very useful mechanism available in Wireshark is packet colorization. You can set-up Wireshark so
that it will colorize packets according to a filter. This allows you to emphasize the packets you are usu-
ally interested in.

Tip!
You will find a lot of Coloring Rule examples at the Wireshark Wiki Coloring Rules
page at http://wiki.wireshark.org/ColoringRules.

To colorize packets, select the Coloring Rules... menu item from the View menu, Wireshark will pop up
the "Coloring Rules" dialog box as shown in Figure 9.1, “The "Coloring Rules" dialog box”.

Figure 9.1. The "Coloring Rules" dialog box

Once the Coloring Rules dialog box is up, there are a number of buttons you can use, depending on
whether or not you have any color filters installed already.

Note!
You will need to carefully select the order the coloring rules are listed (and thus applied) as
they are applied in order from top to bottom. So, more specific rules need to be listed be-
fore more general rules. For example, if you have a color rule for UDP before the one for
DNS, the color rule for DNS will never be applied (as DNS uses UDP, so the UDP rule
will be matching first).

If this is the first time you have used Coloring Rules, click on the New button which will bring up the
Edit color filter dialog box as shown in Figure 9.2, “The "Edit Color Filter" dialog box”.

166
 Customizing Wireshark

Figure 9.2. The "Edit Color Filter" dialog box

In the Edit Color dialog box, simply enter a name for the color filter, and enter a filter string in the Filter
text field. Figure 9.2, “The "Edit Color Filter" dialog box” shows the values arp and arp which means
that the name of the color filter is arp and the filter will select protocols of type arp. Once you have
entered these values, you can choose a foreground and background color for packets that match the filter
expression. Click on Foreground color... or Background color... to achieve this and Wireshark will
pop up the Choose foreground/background color for protocol dialog box as shown in Figure 9.3, “The
"Choose color" dialog box”.

Figure 9.3. The "Choose color" dialog box

167
 Customizing Wireshark

Select the color you desire for the selected packets and click on OK.

Note!
You must select a color in the colorbar next to the colorwheel to load values into the RGB
values. Alternatively, you can set the values to select the color you want.

Figure 9.4, “Using color filters with Wireshark” shows an example of several color filters being used in
Wireshark. You may not like the color choices, however, feel free to choose your own.

If you are uncertain which coloring rule actually took place for a specific packet, have a look at the
[Coloring Rule Name: ...] and [Coloring Rule String: ...] fields.

Figure 9.4. Using color filters with Wireshark

168
Customizing Wireshark

169
 Customizing Wireshark

9.4. Control Protocol dissection

The user can control how protocols are dissected.

Each protocol has its own dissector, so dissecting a complete packet will typically involve several dis-
sectors. As Wireshark tries to find the right dissector for each packet (using static "routes" and heuristics
"guessing"), it might choose the wrong dissector in your specific case. For example, Wireshark won't
know if you use a common protocol on an uncommon TCP port, e.g. using HTTP on TCP port 800 in-
stead of the standard port 80.

There are two ways to control the relations between protocol dissectors: disable a protocol dissector
completely or temporarily divert the way Wireshark calls the dissectors.

9.4.1. The "Enabled Protocols" dialog box

The Enabled Protocols dialog box lets you enable or disable specific protocols, all protocols are enabled
by default. When a protocol is disabled, Wireshark stops processing a packet whenever that protocol is
encountered.

Note!
Disabling a protocol will prevent information about higher-layer protocols from being dis-
played. For example, suppose you disabled the IP protocol and selected a packet contain-
ing Ethernet, IP, TCP, and HTTP information. The Ethernet information would be dis-
played, but the IP, TCP and HTTP information would not - disabling IP would prevent it
and the other protocols from being displayed.

Figure 9.5. The "Enabled Protocols" dialog box

170
 Customizing Wireshark

To disable or enable a protocol, simply click on it using the mouse or press the space bar when the pro-
tocol is highlighted.

Warning!
You have to use the Save button to save your settings. The OK or Apply buttons will not
save your changes permanently, so they will be lost when Wireshark is closed.

You can choose from the following actions:

1. Enable All Enable all protocols in the list.

171
 Customizing Wireshark

2. Disable All Disable all protocols in the list.

3. Invert Toggle the state of all protocols in the list.

4. OK Apply the changes and close the dialog box.

5. Apply Apply the changes and keep the dialog box open.

6. Save Save the settings to the disabled_protos, see Appendix A, Files and Folders for details.

7. Cancel Cancel the changes and close the dialog box.

9.4.2. User Specified Decodes

The "Decode As" functionality let you temporarily divert specific protocol dissections. This might be
useful for example, if you do some uncommon experiments on your network.

Figure 9.6. The "Decode As" dialog box

The content of this dialog box depends on the selected packet when it was opened.

Warning!
The user specified decodes can not be saved. If you quit Wireshark, these settings will be
lost.

172
 Customizing Wireshark

1. Decode Decode packets the selected way.

2. Do not decode Do not decode packets the selected way.

3. Link/Network/Transport Specify the network layer at which "Decode As" should take place.
Which of these pages are available, depends on the content of the selected packet when this dialog
box was opened.

4. Show Current Open a dialog box showing the current list of user specified decodes.

5. OK Apply the currently selected decode and close the dialog box.

6. Apply Apply the currently selected decode and keep the dialog box open.

7. Cancel Cancel the changes and close the dialog box.

9.4.3. Show User Specified Decodes

This dialog box shows the currently active user specified decodes.

Figure 9.7. The "Decode As: Show" dialog box

173
 Customizing Wireshark

1. OK Close this dialog box.

2. Clear Removes all user specified decodes.

174
 Customizing Wireshark

9.5. Preferences
There are a number of preferences you can set. Simply select the Preferences... menu item from the Edit
menu, and Wireshark will pop up the Preferences dialog box as shown in Figure 9.8, “The preferences
dialog box”, with the "User Interface" page as default. On the left side is a tree where you can select the
page to be shown.

Note!
Preference settings are added frequently. For a recent explanation of the preference pages
and their settings have a look at the Wireshark Wiki Preferences page at ht-
tp://wiki.wireshark.org/Preferences.

Warning!
The OK or Apply button will not save the preference settings, you'll have to save the set-
tings by clicking the Save button.

• The OK button will apply the preferences settings and close the dialog.

• The Apply button will apply the preferences settings and keep the dialog open.

• The Save button will apply the preferences settings, save the settings on the hard disk and keep the
dialog open.

• The Cancel button will restore all preferences settings to the last saved state.

Figure 9.8. The preferences dialog box

175
Customizing Wireshark

176
Customizing Wireshark

177
Appendix A. Files and Folders
A.1. Capture Files
To understand which information will remain available after the captured packets are saved to a capture
file, it's helpful to know a bit about the capture file contents.

Wireshark uses the libpcap file format as the default format to save captured packets, this format exists
for a long time and it's pretty simple. However, it has some drawbacks: it's not extensible and lacks
some information that would be really helpful (e.g. being able to add a comment to a packet "the prob-
lems start here" would be really nice).

In addition to the libpcap format, Wireshark supports several different capture file formats. However,
the problems described above also applies for these formats too.

A new capture file format "PCAP Next Generation Dump File Format" is currently under development,
which will fix these drawbacks. However, it still might take a while until the new file format is ready
and Wireshark can use it.

A.1.1. Libpcap File Contents

At the start of each libpcap capture file some basic information is stored like a magic number to identify
the libpcap file format. The most interesting information of this file start is the link layer type (Ethernet,
Token Ring, ...).

The following data is saved for each packet:

• the timestamp with millisecond resolution

• the packet length as it was "on the wire"

• the packet length as it's saved in the file

• the packet's raw bytes

A detailed description of the libpcap file format can be found at: http://wiki.wireshark.org/Development/
LibpcapFileFormat

A.1.2. Not Saved in the Capture File

Probably even more interesting for the everyday Wireshark usage is to know the things that are not
saved in the capture file:

• current selections (selected packet, ...)

• name resolution information, see Section 7.6, “Name Resolution” for details

Warning!
The name resolution information is rebuild each time Wireshark is restarted so this in-
formation even might change when the capture file is reopened on the same machine
later!

178
 Files and Folders

• the number of packets dropped while capturing

• packet marks set with "Edit/Mark Packet"

• time references set with "Edit/Time Reference"

• the current display filter

• ...

179
 Files and Folders

A.2. Configuration Files and Folders

Wireshark uses a number of files and folders while it is running. Some of these reside in the personal
configuration folder and are used to maintain information between runs of Wireshark, while some of
them are maintained in system areas.

Tip
A list of the folders Wireshark actually uses can be found under the Folders tab in the dia-
log box coming up, when you select About Wireshark from the Help menu.

The content format of the configuration files is the same on all platforms. However, to match the differ-
ent policies for unix and windows platforms, different folders for these files are used.

Table A.1. Configuration files and folders overview

File/Folder Description Unix/Linux Windows folders
folders
preferences Settings from the / %WIRESHARK%\wireshark.conf,
Preferences dialog etc/wire- %APPDATA%\Wireshark\preferences
box. shark.conf,
$HOME/.wireshar
k/preferences
recent Recent GUI set- $HOME/.wireshar %APPDATA%\Wireshark\recent
tings (e.g. recent k/recent
files lists).
cfilters Capture filters. $HOME/.wireshar %WIRESHARK%\cfilters,
k/cfilters %APPDATA%\Wireshark\cfilters
dfilters Display filters. $HOME/.wireshar %WIRESHARK%\dfilters,
k/dfilters %APPDATA%\Wireshark\dfilters
colorfilters Coloring rules. $HOME/.wireshar %WIRESHARK%\colorfilters,
k/colorfilters %APPDATA%\Wireshark\colorfilters
dis- Disabled proto- $HOME/.wireshar %WIRESHARK%\disabled_protos,
abled_protos cols. k/disabled_protos %APPDATA%\Wireshark\disabled_protos
ethers Ethernet name res- /etc/ethers, %WIRESHARK%\ethers,
olution. $HOME/.wireshar %APPDATA%\Wireshark\ethers
k/ethers
manuf Ethernet name res- /etc/manuf, %WIRESHARK%\manuf,
olution. $HOME/.wireshar %APPDATA%\Wireshark\manuf
k/manuf
hosts IPv4 and IPv6 /etc/hosts, %WIRESHARK%\hosts,
name resolution. $HOME/.wireshar %APPDATA%\Wireshark\hosts
k/hosts
ipxnets IPX name resolu- /etc/ipxnets, %WIRESHARK%\ipxnets,
tion. $HOME/.wireshar %APPDATA%\Wireshark\ipxnets
k/ipxnets
plugins Plugin directories. / %WIRESHARK%\plugins\<version>,
usr/ %APPDATA%\Wireshark\plugins
share/wire-
shark/plugins, /

180
 Files and Folders

File/Folder Description Unix/Linux Windows folders

folders
usr/loc-
al/
share/wire-
shark/plugins,
$HOME/.wireshar
k/plugins
temp Temporary files. Environment: Environment: TMPDIR or TEMP
TMPDIR

Windows folders
%APPDATA% points to the personal configuration folder, typically C:\Documents
and Settings\<username>\Application Data (for further details, have a
look at Section A.3.1, “Windows profiles”), %WIRESHARK% points to the Wireshark
program folder, typically C:\Program Files\Wireshark

Unix/Linux folders
The /etc folder is the global Wireshark configuration folder. The folder actually used on
your system may vary, maybe something like: /usr/local/etc.

preferences/wireshark.conf This file contains your Wireshark preferences, including defaults

for capturing and displaying packets. It is a simple text file con-
taining statements of the form:

variable: value

The settings from this file are read in at program start and written
to disk when you press the Save button in the "Preferences" dia-
log box.

recent This file contains various GUI related settings like the main win-
dow position and size, the recent files list and such. It is a simple
text file containing statements of the form:

variable: value

It is read at program start and written at program exit.

cfilters This file contains all the capture filters that you have defined and
saved. It consists of one or more lines, where each line has the
following format:

"<filter name>" <filter string>

The settings from this file are read in at program start and written

181
 Files and Folders

to disk when you press the Save button in the "Capture Filters"
dialog box.

dfilters This file contains all the display filters that you have defined and
saved. It consists of one or more lines, where each line has the
following format:

"<filter name>" <filter string>

The settings from this file are read in at program start and written
to disk when you press the Save button in the "Display Filters"
dialog box.

colorfilters This file contains all the color filters that you have defined and
saved. It consists of one or more lines, where each line has the
following format:

@<filter name>@<filter string>

@[<bg RGB(16-bit)>][<fg RGB(16-bit)>]

The settings from this file are read in at program start and written
to disk when you press the Save button in the "Coloring Rules"
dialog box.

disabled_protos Each line in this file specifies a disabled protocol name. The fol-
lowing are some examples:

tcp
udp

The settings from this file are read in at program start and written
to disk when you press the Save button in the "Enabled Protocols"
dialog box.

ethers When Wireshark is trying to translate Ethernet hardware ad-

dresses to names, it consults the files listed in Table A.1,
“Configuration files and folders overview”. If an address is not
found in /etc/ethers, Wireshark looks in
$HOME/.wireshark/ethers

Each line in these files consists of one hardware address and name
separated by whitespace. The digits of hardware addresses are
separated by colons (:), dashes (-) or periods(.). The following are
some examples:

ff-ff-ff-ff-ff-ff Broadcast
c0-00-ff-ff-ff-ff TR_broadcast
00.2b.08.93.4b.a1 Freds_machine

The settings from this file are read in at program start and never

182
 Files and Folders

written by Wireshark.

manuf Wireshark uses the files listed in Table A.1, “Configuration files
and folders overview” to translate the first three bytes of an Ether-
net address into a manufacturers name. This file has the same
format as the ethers file, except addresses are three bytes long.

An example is:

00:00:01 Xerox # XEROX CORPORATION

The settings from this file are read in at program start and never
written by Wireshark.

hosts Wireshark uses the files listed in Table A.1, “Configuration files
and folders overview” to translate IPv4 and IPv6 addresses into
names.

This file has the same format as the usual /etc/hosts file in unix
systems.

An example is:

# Comments must be prepended by the # sign!

192.168.0.1 homeserver

The settings from this file are read in at program start and never
written by Wireshark.

ipxnets Wireshark uses the files listed in Table A.1, “Configuration files
and folders overview” to translate IPX network numbers into
names.

An example is:

C0.A8.2C.00 HR
c0-a8-1c-00 CEO
00:00:BE:EF IT_Server1
110f FileServer3

The settings from this file are read in at program start and never
written by Wireshark.

plugins folder Wireshark searches for plugins in the directories listed in Ta-
ble A.1, “Configuration files and folders overview”. They are
searched in the order listed.

temp folder If you start a new capture and don't specify a filename for it,
Wireshark uses this directory to place that file in, see Section 4.6,
“Capture files and file modes”.

183
Files and Folders

184
 Files and Folders

A.3. Windows folders

Here you will find some details about the folders used in Wireshark on different Windows versions.

As already mentioned, you can find the currently used folders in the About Wireshark dialog.

A.3.1. Windows profiles

Windows uses some special directories to store user configuration files in, named the user profile. This
can be confusing, as the default directory location changed from version to version and might also be
different for English and internationalized versions of windows.

Note!
If you upgraded to a new windows version, your profile might be kept in the former loca-
tion, so the defaults mentioned here might not apply.

The following will try to guide you to the right place where to look for Wireshark's profile data.

95/98/ME The default in Windows 95/98/ME is: all users work with the
same profile, which is located at:
C:\windows\Application Data\Wireshark

98/ME (with enabled user pro- In Windows 98 and ME you can enable separate user profiles. In
files) that case, something like:
C:\windows\Profiles\<username>\Application
Data\Wireshark is used.

NT 4 C:\WINNT\Profiles\<username>\Application
Data\Wireshark

2000/XP C:\Documents and Set-

tings\<username>\Application Data, "Documents
and Settings" and "Application Data" might be internationalized.

A.3.2. Windows NT/2000/XP roaming profiles

The following will only be applicable if you are using roaming profiles. This might be the case, if you
work in a Windows domain environment (used in huge company networks). The configurations of all
programs you use won't be saved on the local hard drive of the computer you are currently working on,
but on the domain server.

As Wireshark is using the correct places to store it's profile data, your settings will travel with you, if
you logon to a different computer the next time.

There is an exception to this: The "Local Settings" folder in your profile data (typically something like:
C:\Documents and Settings\<username>\Local Settings) will not be transferred to
the domain server. This is the default for temporary capture files.

A.3.3. Windows temporary folder

Wireshark uses the folder which is set by the TMPDIR or TEMP environment variable. This variable

185
 Files and Folders

will be set by the windows installer.

The default location for temporary files on NT 4 is just C:\TEMP, and in 2000 the default location is
some directory under your profile directory but it might have "Temporary Files" in the path name.

186
Files and Folders

187
Appendix B. Protocols and Protocol
Fields
Wireshark distinguishes between protocols (e.g. tcp) and protocol fields (e.g. tcp.port).

A comprehensive list of all protocols and protocol fields can be found at: ht-
tp://www.wireshark.org/docs/dfref/

188
Appendix C. Wireshark Messages
Wireshark provides you with additional information generated out of the plain packet data or it may
need to indicate dissection problems. Messages generated by Wireshark are usually placed in [] paren-
theses.

C.1. Packet List Messages

These messages might appear in the packet list.

C.1.1. [Malformed Packet]

Malformed packet means that the protocol dissector can't work out the contents of the packet any fur-
ther. This can have various reasons:

• Wrong dissector Wireshark erroneously has chosen the wrong protocol dissector for this packet.
This will happen e.g. if you are using a protocol not on it's well known TCP or UDP port. You may
try Analyze|Decode As to circumvent this problem.

• Packet not reassembled The packet is longer than a single frame and it is not reassembled, see Sec-
tion 7.5, “Packet Reassembling” for further details.

• Packet is malformed The packet is actually wrong (malformed), meaning that a part of the packet is
just not as expected (not following the protocol specifications).

• Dissector is buggy The corresponding protocol dissector is simply buggy or still incomplete.

Any of the above is possible. You'll have to look into the specific situation to determine what it is. You
could disable the dissector by disabling the protocol on the Analyze menu and check how Wireshark dis-
plays the packet then. You could (if it's TCP) enable reassembly for TCP and the specific dissector (if
possible) in the Edit|Preferences menu. You could check the packet contents yourself by reading the
packet bytes and comparing it to the protocol specification. This could reveal a dissector bug. Or you
could find out that the packet is indeed wrong.

C.1.2. [Packet size limited during capture]

The packet size was limited during capture, see "Limit each packet to n bytes" at the Section 4.5, “The
"Capture Options" dialog box”. While dissecting, the current protocol dissector was simply running out
of packet bytes and had to give up. There's nothing else you can do now, except to repeat the whole cap-
ture process again with a higher (or no) packet size limitation.

189
 Wireshark Messages

C.2. Packet Details Messages

These messages might appear in the packet details.

C.2.1. [Response in frame: 123]

The current packet is the request of a detected request/response pair. You can directly jump to the cor-
responding response packet just by double clicking on this message.

C.2.2. [Request in frame: 123]

Same as "Response in frame: 123" above, but the other way round.

C.2.3. [Time from request: 0.123 seconds]

The time between the request and the response packets.

190
Wireshark Messages

191
Appendix D. Related command line
tools
D.1. Introduction
Beside the Wireshark GUI application, there are some command line tools, which can be helpful for do-
ing some more specialized things. These tools will be described in this chapter.

192
 Related command line tools

D.2. tshark: Terminal-based Wireshark

TShark is a terminal oriented version of Wireshark designed for capturing and displaying packets when
an interactive user interface isn't necessary or available. It supports the same options as wireshark. For
more information on tshark, see the manual pages (man tshark).

193
 Related command line tools

D.3. tcpdump: Capturing with tcpdump for

viewing with Wireshark
There are occasions when you want to capture packets using tcpdump rather than wireshark, especially
when you want to do a remote capture and do not want the network load associated with running Wire-
shark remotely (not to mention all the X traffic polluting your capture).

However, the default tcpdump parameters result in a capture file where each packet is truncated, be-
cause tcpdump, by default, does only capture the first 68 bytes of each packet.

To ensure that you capture complete packets, use the following command:

tcpdump -i <interface> -s 1500 -w <some-file>

You will have to specify the correct interface and the name of a file to save into. In addition, you will
have to terminate the capture with ^C when you believe you have captured enough packets.

Note!
tcpdump is not part of the Wireshark distribution. You can get it from: ht-
tp://www.tcpdump.org for various platforms.

194
 Related command line tools

D.4. dumpcap: Capturing with dumpcap for

viewing with Wireshark
Dumpcap is a network traffic dump tool. It lets you capture packet data from a live network and write
the packets to a file. Dumpcap's native capture file format is libpcap format, which is also the format
used by Wireshark, tcpdump and various other tools.

Without any options set it will use the pcap library to capture traffic from the first available network in-
terface and writes the received raw packet data, along with the packets' time stamps into a libpcap file.

Packet capturing is performed with the pcap library. The capture filter syntax follows the rules of the
pcap library.

Example D.1. Help information available from dumpcap

Dumpcap 0.99.0
Capture network packets and dump them into a libpcap file.
See http://www.wireshark.org for more information.
Usage: dumpcap [options] ...
Capture interface:
-i <interface> name or idx of interface (def: first none loopback)
-f <capture filter> packet filter in libpcap filter syntax
-s <snaplen> packet snapshot length (def: 65535)
-p don't capture in promiscuous mode
-B <buffer size> size of kernel buffer (def: 1MB)
-y <link type> link layer type (def: first appropriate)
-D print list of interfaces and exit
-L print list of link-layer types of iface and exit
Stop conditions:
-c <packet count> stop after n packets (def: infinite)
-a <autostop cond.> ... duration:NUM - stop after NUM seconds
filesize:NUM - stop this file after NUM KB
files:NUM - stop after NUM files
Output (files):
-w <filename> name of file to save (def: tempfile)
-b <ringbuffer opt.> ... duration:NUM - switch to next file after NUM secs
filesize:NUM - switch to next file after NUM KB
files:NUM - ringbuffer: replace after NUM files
Miscellaneous:
-v print version information and exit
-h display this help and exit
Example: dumpcap -i eth0 -a duration:60 -w output.pcap
"Capture network packets from interface eth0 until 60s passed into output.pcap"
Use Ctrl-C to stop capturing at any time.

195
 Related command line tools

D.5. capinfos: Print information about capture

files
Included with Wireshark is a small utility called capinfos, which is a command-line utility to print in-
formation about binary capture files.

Example D.2. Help information available from capinfos

$ capinfos -h
Usage: capinfos [-t] [-c] [-s] [-d] [-u] [-a] [-e] [-y]
[-i] [-z] [-h] <capfile>
where -t display the capture type of <capfile>
-c count the number of packets
-s display the size of the file
-d display the total length of all packets in the file
(in bytes)
-u display the capture duration (in seconds)
-a display the capture start time
-e display the capture end time
-y display average data rate (in bytes)
-i display average data rate (in bits)
-z display average packet size (in bytes)
-h produces this help listing.
If no data flags are given, default is to display all statistics

196
 Related command line tools

D.6. editcap: Edit capture files

Included with Wireshark is a small utility called editcap, which is a command-line utility for working
with capture files. Its main function is to remove packets from capture files, but it can also be used to
convert capture files from one format to another, as well as print information about capture files.

Example D.3. Help information available from editcap

$ editcap.exe -h
Editcap 0.99.3
Edit and/or translate the format of capture files.
See http://www.wireshark.org for more information.
Usage: editcap [options] ... <infile> <outfile> [ <packet#>[-<packet#>] ... ]
A single packet or a range of packets can be selected.
Packets:
-C <choplen> chop each packet at the end by <choplen> bytes
-d remove duplicate packets
-E <error probability> set the probability (between 0.0 and 1.0 incl.)
that a particular packet byte will be randomly changed
-r keep the selected packets, default is to delete them
-s <snaplen> truncate packets to max. <snaplen> bytes of data
-t <time adjustment> adjust the timestamp of selected packets,
<time adjustment> is in relative seconds (e.g. -0.5)
-A <start time> don't output packets whose timestamp is before the
given time (format as YYYY-MM-DD hh:mm:ss)
-B <stop time> don't output packets whose timestamp is after the
given time (format as YYYY-MM-DD hh:mm:ss)
Output File(s):
-c <packets per file> split the packet output to different files,
with a maximum of <packets per file> each
-F <capture type> set the output file type, default is libpcap
an empty "-F" option will list the file types
-T <encap type> set the output file encapsulation type,
default is the same as the input file
an empty "-T" option will list the encapsulation types
Miscellaneous:
-h display this help and exit
-v verbose output
$ editcap.exe -F
editcap.exe: option requires an argument -- F
editcap.exe: The available capture file types for "F":
libpcap - Wireshark/tcpdump/... - libpcap
nseclibpcap - Wireshark - nanosecond libpcap
modlibpcap - Modified tcpdump - libpcap
nokialibpcap - Nokia tcpdump - libpcap
rh6_1libpcap - RedHat 6.1 tcpdump - libpcap
suse6_3libpcap - SuSE 6.3 tcpdump - libpcap
5views - Accellent 5Views capture
dct2000 - Catapult DCT2000 trace (.out format)
nettl - HP-UX nettl trace
netmon1 - Microsoft NetMon 1.x
netmon2 - Microsoft NetMon 2.x

197
 Related command line tools

ngsniffer - NA Sniffer (DOS)

ngwsniffer_1_1 - NA Sniffer (Windows) 1.1
ngwsniffer_2_0 - NA Sniffer (Windows) 2.00x
niobserverv9 - Network Instruments Observer (V9)
lanalyzer - Novell LANalyzer
snoop - Sun snoop
rf5 - Tektronix K12xx 32-bit .rf5 format
visual - Visual Networks traffic capture
$ editcap.exe -F
editcap.exe: option requires an argument -- T
editcap.exe: The available encapsulation types for "T":
ether - Ethernet
tr - Token Ring
slip - SLIP
ppp - PPP
fddi - FDDI
fddi-swapped - FDDI with bit-swapped MAC addresses
rawip - Raw IP
arcnet - ARCNET
arcnet_linux - Linux ARCNET
atm-rfc1483 - RFC 1483 ATM
linux-atm-clip - Linux ATM CLIP
lapb - LAPB
atm-pdus - ATM PDUs
atm-pdus-untruncated - ATM PDUs - untruncated
null - NULL
ascend - Lucent/Ascend access equipment
isdn - ISDN
ip-over-fc - RFC 2625 IP-over-Fibre Channel
ppp-with-direction - PPP with Directional Info
ieee-802-11 - IEEE 802.11 Wireless LAN
prism - IEEE 802.11 plus Prism II monitor mode header
ieee-802-11-radio - IEEE 802.11 Wireless LAN with radio information
ieee-802-11-radiotap - IEEE 802.11 plus radiotap WLAN header
ieee-802-11-avs - IEEE 802.11 plus AVS WLAN header
linux-sll - Linux cooked-mode capture
frelay - Frame Relay
frelay-with-direction - Frame Relay with Directional Info
chdlc - Cisco HDLC
ios - Cisco IOS internal
ltalk - Localtalk
pflog-old - OpenBSD PF Firewall logs, pre-3.4
hhdlc - HiPath HDLC
docsis - Data Over Cable Service Interface Specification
cosine - CoSine L2 debug log
whdlc - Wellfleet HDLC
sdlc - SDLC
tzsp - Tazmen sniffer protocol
enc - OpenBSD enc(4) encapsulating interface
pflog - OpenBSD PF Firewall logs
chdlc-with-direction - Cisco HDLC with Directional Info
bluetooth-h4 - Bluetooth H4
mtp2 - SS7 MTP2
mtp3 - SS7 MTP3
irda - IrDA
user0 - USER 0
user1 - USER 1
user2 - USER 2
user3 - USER 3
user4 - USER 4
user5 - USER 5
user6 - USER 6
user7 - USER 7

198
 Related command line tools

user8 - USER 8
user9 - USER 9
user10 - USER 10
user11 - USER 11
user12 - USER 12
user13 - USER 13
user14 - USER 14
user15 - USER 15
symantec - Symantec Enterprise Firewall
ap1394 - Apple IP-over-IEEE 1394
bacnet-ms-tp - BACnet MS/TP
raw-icmp-nettl - Raw ICMP with nettl headers
raw-icmpv6-nettl - Raw ICMPv6 with nettl headers
gprs-llc - GPRS LLC
juniper-atm1 - Juniper ATM1
juniper-atm2 - Juniper ATM2
redback - Redback SmartEdge
rawip-nettl - Raw IP with nettl headers
ether-nettl - Ethernet with nettl headers
tr-nettl - Token Ring with nettl headers
fddi-nettl - FDDI with nettl headers
unknown-nettl - Unknown link-layer type with nettl headers
mtp2-with-phdr - MTP2 with pseudoheader
juniper-pppoe - Juniper PPPoE
gcom-tie1 - GCOM TIE1
gcom-serial - GCOM Serial
x25-nettl - X25 with nettl headers
k12 - K12 protocol analyzer
juniper-mlppp - Juniper MLPPP
juniper-mlfr - Juniper MLFR
juniper-ether - Juniper Ethernet
juniper-ppp - Juniper PPP
juniper-frelay - Juniper Frame-Relay
juniper-chdlc - Juniper C-HDLC
juniper-ggsn - Juniper GGSN
lapd - LAPD
dct2000 - Catapult DCT2000
ber - ASN.1 Basic Encoding Rules

Where each option has the following meaning:

-r This option specifies that the frames listed should be kept, not de-
leted. The default is to delete the listed frames.

-h This option provides help.

-v This option specifies verbose operation. The default is silent oper-

ation.

-T {encap type} This option specifies the frame encapsulation type to use.

It is mainly for converting funny captures to something that Wire-

shark can deal with.

The default frame encapsulation type is the same as the input en-
capsulation.

-F {capture type} This option specifies the capture file format to write the output
file in.

199
 Related command line tools

The default is libpcap format.

-s {snaplen} Specifies that packets should be truncated to {snaplen} bytes of

data.

-t {time adjustment} Specifies the time adjustment to be applied to selected packets.

{infile} This parameter specifies the input file to use. It must be present.

{outfile} This parameter specifies the output file to use. It must be present.

[record#[-][record# ...]] This optional parameter specifies the records to include or ex-
clude (depending on the -r option. You can specify individual re-
cords or a range of records.

200
 Related command line tools

D.7. mergecap: Merging multiple capture files

into one
Mergecap is a program that combines multiple saved capture files into a single output file specified by
the -w argument. Mergecap knows how to read libpcap capture files, including those of tcpdump. In ad-
dition, Mergecap can read capture files from snoop (including Shomiti) and atmsnoop, LanAlyzer,
Sniffer (compressed or uncompressed), Microsoft Network Monitor, AIX's iptrace, NetXray, Sniffer
Pro, RADCOM's WAN/LAN analyzer, Lucent/Ascend router debug output, HP-UX's nettl, and the
dump output from Toshiba's ISDN routers. There is no need to tell Mergecap what type of file you are
reading; it will determine the file type by itself. Mergecap is also capable of reading any of these file
formats if they are compressed using gzip. Mergecap recognizes this directly from the file; the '.gz' ex-
tension is not required for this purpose.

By default, it writes the capture file in libpcap format, and writes all of the packets in both input capture
files to the output file. The -F flag can be used to specify the format in which to write the capture file; it
can write the file in libpcap format (standard libpcap format, a modified format used by some patched
versions of libpcap, the format used by Red Hat Linux 6.1, or the format used by SuSE Linux 6.3),
snoop format, uncompressed Sniffer format, Microsoft Network Monitor 1.x format, and the format
used by Windows-based versions of the Sniffer software.

Packets from the input files are merged in chronological order based on each frame's timestamp, unless
the -a flag is specified. Mergecap assumes that frames within a single capture file are already stored in
chronological order. When the -a flag is specified, packets are copied directly from each input file to the
output file, independent of each frame's timestamp.

If the -s flag is used to specify a snapshot length, frames in the input file with more captured data than
the specified snapshot length will have only the amount of data specified by the snapshot length written
to the output file. This may be useful if the program that is to read the output file cannot handle packets
larger than a certain size (for example, the versions of snoop in Solaris 2.5.1 and Solaris 2.6 appear to
reject Ethernet frames larger than the standard Ethernet MTU, making them incapable of handling gig-
abit Ethernet captures if jumbo frames were used).

If the -T flag is used to specify an encapsulation type, the encapsulation type of the output capture file
will be forced to the specified type, rather than being the type appropriate to the encapsulation type of
the input capture file. Note that this merely forces the encapsulation type of the output file to be the spe-
cified type; the packet headers of the packets will not be translated from the encapsulation type of the in-
put capture file to the specified encapsulation type (for example, it will not translate an Ethernet capture
to an FDDI capture if an Ethernet capture is read and '-T fddi' is specified).

Example D.4. Help information available from mergecap

$ mergecap.exe -h
mergecap version 0.10.5
Usage: mergecap [-hva] [-s <snaplen>] [-T <encap type>]
[-F <capture type>] -w <outfile> <infile> [...]
where -h produces this help listing.
-v verbose operation, default is silent
-a files should be concatenated, not merged
Default merges based on frame timestamps
-s <snaplen>: truncate packets to <snaplen> bytes of data
-w <outfile>: sets output filename to <outfile>
-T <encap type> encapsulation type to use:
ether - Ethernet

201
 Related command line tools

tr - Token Ring
slip - SLIP
ppp - PPP
fddi - FDDI
fddi-swapped - FDDI with bit-swapped MAC addresses
rawip - Raw IP
arcnet - ARCNET
arcnet_linux - Linux ARCNET
atm-rfc1483 - RFC 1483 ATM
linux-atm-clip - Linux ATM CLIP
lapb - LAPB
atm-pdus - ATM PDUs
atm-pdus-untruncated - ATM PDUs - untruncated
null - NULL
ascend - Lucent/Ascend access equipment
isdn - ISDN
ip-over-fc - RFC 2625 IP-over-Fibre Channel
ppp-with-direction - PPP with Directional Info
ieee-802-11 - IEEE 802.11 Wireless LAN
prism - IEEE 802.11 plus Prism II monitor mode header
ieee-802-11-radio - IEEE 802.11 Wireless LAN with radio information
ieee-802-11-bsd - IEEE 802.11 plus BSD WLAN header
ieee-802-11-avs - IEEE 802.11 plus AVS WLAN header
linux-sll - Linux cooked-mode capture
frelay - Frame Relay
frelay-with-direction - Frame Relay with Directional Info
chdlc - Cisco HDLC
ios - Cisco IOS internal
ltalk - Localtalk
pflog-old - OpenBSD PF Firewall logs, pre-3.4
hhdlc - HiPath HDLC
docsis - Data Over Cable Service Interface Specification
cosine - CoSine L2 debug log
whdlc - Wellfleet HDLC
sdlc - SDLC
tzsp - Tazmen sniffer protocol
enc - OpenBSD enc(4) encapsulating interface
pflog - OpenBSD PF Firewall logs
chdlc-with-direction - Cisco HDLC with Directional Info
bluetooth-h4 - Bluetooth H4
mtp2 - SS7 MTP2
mtp3 - SS7 MTP3
irda - IrDA
user0 - USER 0
user1 - USER 1
user2 - USER 2
user3 - USER 3
user4 - USER 4
user5 - USER 5
user6 - USER 6
user7 - USER 7
user8 - USER 8
user9 - USER 9
user10 - USER 10
user11 - USER 11
user12 - USER 12
user13 - USER 13
user14 - USER 14
user15 - USER 15
symantec - Symantec Enterprise Firewall
ap1394 - Apple IP-over-IEEE 1394
bacnet-ms-tp - BACnet MS/TP
default is the same as the first input file
-F <capture type> capture file type to write:

202
 Related command line tools

libpcap - libpcap (tcpdump, Wireshark, etc.)

rh6_1libpcap - RedHat Linux 6.1 libpcap (tcpdump)
suse6_3libpcap - SuSE Linux 6.3 libpcap (tcpdump)
modlibpcap - modified libpcap (tcpdump)
nokialibpcap - Nokia libpcap (tcpdump)
lanalyzer - Novell LANalyzer
ngsniffer - Network Associates Sniffer (DOS-based)
snoop - Sun snoop
netmon1 - Microsoft Network Monitor 1.x
netmon2 - Microsoft Network Monitor 2.x
ngwsniffer_1_1 - Network Associates Sniffer (Windows-based) 1.1
ngwsniffer_2_0 - Network Associates Sniffer (Windows-based) 2.00x
visual - Visual Networks traffic capture
5views - Accellent 5Views capture
niobserverv9 - Network Instruments Observer version 9
default is libpcap

-h Prints the version and options and exits.

-v Causes mergecap to print a number of messages while it's working.

-a Causes the frame timestamps to be ignored, writing all packets from the first input file followed by
all packets from the second input file. By default, when -a is not specified, the contents of the input
files are merged in chronological order based on each frame's timestamp. Note: when merging,
mergecap assumes that packets within a capture file are already in chronological order.

-s Sets the snapshot length to use when writing the data.

-w Sets the output filename.

-T Sets the packet encapsulation type of the output capture file.

-F Sets the file format of the output capture file.

A simple example merging dhcp-capture.libpcap and imap-1.libpcap into out-

file.libpcap is shown below.

Example D.5. Simple example of using mergecap

$ mergecap -w outfile.libpcap dhcp-capture.libpcap imap-1.libpcap

203
 Related command line tools

D.8. text2pcap: Converting ASCII hexdumps to

network captures
There may be some occasions when you wish to convert a hex dump of some network traffic into a libp-
cap file.

Text2pcap is a program that reads in an ASCII hex dump and writes the data described into a libpcap-
style capture file. text2pcap can read hexdumps with multiple packets in them, and build a capture file of
multiple packets. text2pcap is also capable of generating dummy Ethernet, IP and UDP headers, in order
to build fully processable packet dumps from hexdumps of application-level data only.

Text2pcap understands a hexdump of the form generated by od -A x -t x1. In other words, each byte is
individually displayed and surrounded with a space. Each line begins with an offset describing the posi-
tion in the file. The offset is a hex number (can also be octal - see -o), of more than two hex digits. Here
is a sample dump that text2pcap can recognize:

000000 00 e0 1e a7 05 6f 00 10 ........
000008 5a a0 b9 12 08 00 46 00 ........
000010 03 68 00 00 00 00 0a 2e ........
000018 ee 33 0f 19 08 7f 0f 19 ........
000020 03 80 94 04 00 00 10 01 ........
000028 16 a2 0a 00 03 50 00 0c ........
000030 01 01 0f 19 03 80 11 01 ........

There is no limit on the width or number of bytes per line. Also the text dump at the end of the line is ig-
nored. Bytes/hex numbers can be uppercase or lowercase. Any text before the offset is ignored, includ-
ing email forwarding characters '>'. Any lines of text between the bytestring lines is ignored. The offsets
are used to track the bytes, so offsets must be correct. Any line which has only bytes without a leading
offset is ignored. An offset is recognized as being a hex number longer than two characters. Any text
after the bytes is ignored (e.g. the character dump). Any hex numbers in this text are also ignored. An
offset of zero is indicative of starting a new packet, so a single text file with a series of hexdumps can be
converted into a packet capture with multiple packets. Multiple packets are read in with timestamps dif-
fering by one second each. In general, short of these restrictions, text2pcap is pretty liberal about reading
in hexdumps and has been tested with a variety of mangled outputs (including being forwarded through
email multiple times, with limited line wrap etc.)

There are a couple of other special features to note. Any line where the first non-whitespace character is
'#' will be ignored as a comment. Any line beginning with #TEXT2PCAP is a directive and options can
be inserted after this command to be processed by text2pcap. Currently there are no directives imple-
mented; in the future, these may be used to give more fine grained control on the dump and the way it
should be processed e.g. timestamps, encapsulation type etc.

Text2pcap also allows the user to read in dumps of application-level data, by inserting dummy L2, L3
and L4 headers before each packet. The user can elect to insert Ethernet headers, Ethernet and IP, or
Ethernet, IP and UDP headers before each packet. This allows Wireshark or any other full-packet de-
coder to handle these dumps.

Example D.6. Help information available for text2pcap

$ text2pcap.exe -h

204
 Related command line tools

Usage: text2pcap.exe [-h] [-d] [-q] [-o h|o] [-l typenum] [-e l3pid] [-i proto]
[-m max-packet] [-u srcp,destp] [-T srcp,destp] [-s srcp,destp,tag]
[-S srcp,destp,tag] [-t timefmt] <input-filename> <output-filename>
where <input-filename> specifies input filename (use - for standard input)
<output-filename> specifies output filename (use - for standard output)
[options] are one or more of the following
-h : Display this help message
-d : Generate detailed debug of parser states
-o hex|oct : Parse offsets as (h)ex or (o)ctal. Default is hex
-l typenum : Specify link-layer type number. Default is 1 (Ethernet).
See net/bpf.h for list of numbers.
-q : Generate no output at all (automatically turns off -d)
-e l3pid : Prepend dummy Ethernet II header with specified L3PID (in
HEX)
Example: -e 0x800
-i proto : Prepend dummy IP header with specified IP protocol (in
DECIMAL).
Automatically prepends Ethernet header as well.
Example: -i 46
-m max-packet : Max packet length in output, default is 64000
-u srcp,destp : Prepend dummy UDP header with specified dest and source ports
(in DECIMAL).
Automatically prepends Ethernet and IP headers as well
Example: -u 30,40
-T srcp,destp : Prepend dummy TCP header with specified dest and source ports
(in DECIMAL).
Automatically prepends Ethernet and IP headers as well
Example: -T 50,60
-s srcp,dstp,tag: Prepend dummy SCTP header with specified dest/source ports
and verification tag (in DECIMAL).
Automatically prepends Ethernet and IP headers as well
Example: -s 30,40,34
-S srcp,dstp,ppi: Prepend dummy SCTP header with specified dest/source ports
and verification tag 0. It also prepends a dummy SCTP DATA
chunk header with payload protocol identifier ppi.
Example: -S 30,40,34
-t timefmt : Treats the text before the packet as a date/time code; the
specified argument is a format string of the sort supported
by strptime.
Example: The time "10:15:14.5476" has the format code
"%H:%M:%S."
NOTE: The subsecond component delimiter must be specified
(.) but no pattern is required; the remaining number
is assumed to be fractions of a second.

-w <filename> Write the capture file generated by text2pcap to <filename>. The default
is to write to standard output.

-h Display the help message

-d Displays debugging information during the process. Can be used multiple

times to generate more debugging information.

-q Be completely quiet during the process.

-o hex|oct Specify the radix for the offsets (hex or octal). Defaults to hex. This cor-

205
 Related command line tools

responds to the -A option for od.

-l Specify the link-layer type of this packet. Default is Ethernet(1). See net/
bpf.h for the complete list of possible encapsulations. Note that this op-
tion should be used if your dump is a complete hex dump of an encapsu-
lated packet and you wish to specify the exact type of encapsulation. Ex-
ample: -l 7 for ARCNet packets.

-e l3pid Include a dummy Ethernet header before each packet. Specify the L3PID
for the Ethernet header in hex. Use this option if your dump has Layer 3
header and payload (e.g. IP header), but no Layer 2 encapsulation. Ex-
ample: -e 0x806 to specify an ARP packet.

For IP packets, instead of generating a fake Ethernet header you can also
use -l 12 to indicate a raw IP packet to Wireshark. Note that -l 12 does
not work for any non-IP Layer 3 packet (e.g. ARP), whereas generating a
dummy Ethernet header with -e works for any sort of L3 packet.

-u srcport destport Include dummy UDP headers before each packet. Specify the source and
destination UDP ports for the packet in decimal. Use this option if your
dump is the UDP payload of a packet but does not include any UDP, IP
or Ethernet headers. Note that this automatically includes appropriate
Ethernet and IP headers with each packet. Example: -u 1000 69 to make
the packets look like TFTP/UDP packets.

206
 Related command line tools

D.9. idl2wrs: Creating dissectors from CORBA

IDL files
In an ideal world idl2wrs would be mentioned in the users guide in passing and documented in the de-
velopers guide. As the developers guide has not yet been completed it will be documented here.

D.9.1. What is it?

As you have probably guessed from the name, idl2wrs takes a user specified IDL file and attempts to
build a dissector that can decode the IDL traffic over GIOP. The resulting file is "C" code, that should
compile okay as a Wireshark dissector.

idl2wrs basically parses the data struct given to it by the omniidl compiler, and using the GIOP API
available in packet-giop.[ch], generates get_CDR_xxx calls to decode the CORBA traffic on the wire.

It consists of 4 main files.

README.idl2wrs This document

wireshark_be.py The main compiler backend

wireshark_gen.py A helper class, that generates the C code.

idl2wrs A simple shell script wrapper that the end user should use to generate the dis-
sector from the IDL file(s).

D.9.2. Why do this?

It is important to understand what CORBA traffic looks like over GIOP/IIOP, and to help build a tool
that can assist in troubleshooting CORBA interworking. This was especially the case after seeing a lot of
discussions about how particular IDL types are represented inside an octet stream.

I have also had comments/feedback that this tool would be good for say a CORBA class when teaching
students what CORBA traffic looks like "on the wire".

It is also COOL to work on a great Open Source project such as the case with "Wireshark" ( ht-
tp://www.wireshark.org )

D.9.3. How to use idl2wrs

To use the idl2wrs to generate Wireshark dissectors, you need the following:

Prerequisites to using idl2wrs

1. Python must be installed. See http://python.org/

2. omniidl from the the omniORB package must be available. See http://omniorb.sourceforge.net/

3. Of course you need Wireshark installed to compile the code and tweak it if required. idl2wrs is part
of the standard Wireshark distribution

207
 Related command line tools

To use idl2wrs to generate an Wireshark dissector from an idl file use the following procedure:

Procedure for converting a CORBA idl file into a Wireshark dissector

1. To write the C code to stdout.

idl2wrs <your file.idl>

eg:

idl2wrs echo.idl

2. To write to a file, just redirect the output.

idl2wrs echo.idl > packet-test-idl.c

You may wish to comment out the register_giop_user_module() code and that will leave you with
heuristic dissection.

If you don't want to use the shell script wrapper, then try steps 3 or 4 instead.

3. To write the C code to stdout.

Usage: omniidl -p ./ -b wireshark_be <your file.idl>

eg:

omniidl -p ./ -b wireshark_be echo.idl

4. To write to a file, just redirect the output.

omniidl -p ./ -b wireshark_be echo.idl > packet-test-idl.c

You may wish to comment out the register_giop_user_module() code and that will leave you with
heuristic dissection.

5. Copy the resulting C code to your Wireshark src directory, edit the two make files to include the
packet-test-idl.c

cp packet-test-idl.c /dir/where/wireshark/lives/
edit Makefile.am
edit Makefile.nmake

6. Run configure

./configure (or ./autogen.sh)

7. Compile the code

make

208
 Related command line tools

8. Good Luck !!

D.9.4. TODO
1. Exception code not generated (yet), but can be added manually.

2. Enums not converted to symbolic values (yet), but can be added manually.

3. Add command line options etc

4. More I am sure :-)

D.9.5. Limitations
See the TODO list inside packet-giop.c

D.9.6. Notes
1. The "-p ./" option passed to omniidl indicates that the wireshark_be.py and wireshark_gen.py are
residing in the current directory. This may need tweaking if you place these files somewhere else.

2. If it complains about being unable to find some modules (eg tempfile.py), you may want to check if
PYTHONPATH is set correctly. On my Linux box, it is PYTHONPATH=/usr/lib/python1.5/

209
Related command line tools

210
Appendix E. This Document's License
(GPL)
As with the original licence and documentation distributed with Wireshark, this document is covered by
the GNU General Public Licence (GNU GPL).

If you haven't read the GPL before, please do so. It explains all the things that you are allowed to do
with this code and documentation.

GNU GENERAL PUBLIC LICENSE

Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your
freedom to share and change it. By contrast, the GNU General Public
License is intended to guarantee your freedom to share and change free
software--to make sure the software is free for all its users. This
General Public License applies to most of the Free Software
Foundation's software and to any other program whose authors commit to
using it. (Some other Free Software Foundation software is covered by
the GNU Library General Public License instead.) You can apply it to
your programs, too.
When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
this service if you wish), that you receive source code or can get it
if you want it, that you can change the software or use pieces of it
in new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid
anyone to deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if you
distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether
gratis or for a fee, you must give the recipients all the rights that
you have. You must make sure that they, too, receive or can get the
source code. And you must show them these terms so they know their
rights.
We protect your rights with two steps: (1) copyright the software, and
(2) offer you this license which gives you legal permission to copy,
distribute and/or modify the software.
Also, for each author's protection and ours, we want to make certain
that everyone understands that there is no warranty for this free
software. If the software is modified by someone else and passed on, we
want its recipients to know that what they have is not the original, so
that any problems introduced by others will not reflect on the original
authors' reputations.

211
 This Document's License (GPL)

Finally, any free program is threatened constantly by software

patents. We wish to avoid the danger that redistributors of a free
program will individually obtain patent licenses, in effect making the
program proprietary. To prevent this, we have made it clear that any
patent must be licensed for everyone's free use or not licensed at all.
The precise terms and conditions for copying, distribution and
modification follow.
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains
a notice placed by the copyright holder saying it may be distributed
under the terms of this General Public License. The "Program", below,
refers to any such program or work, and a "work based on the Program"
means either the Program or any derivative work under copyright law:
that is to say, a work containing the Program or a portion of it,
either verbatim or with modifications and/or translated into another
language. (Hereinafter, translation is included without limitation in
the term "modification".) Each licensee is addressed as "you".
Activities other than copying, distribution and modification are not
covered by this License; they are outside its scope. The act of
running the Program is not restricted, and the output from the Program
is covered only if its contents constitute a work based on the
Program (independent of having been made by running the Program).
Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program's
source code as you receive it, in any medium, provided that you
conspicuously and appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep intact all the
notices that refer to this License and to the absence of any warranty;
and give any other recipients of the Program a copy of this License
along with the Program.
You may charge a fee for the physical act of transferring a copy, and
you may at your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion
of it, thus forming a work based on the Program, and copy and
distribute such modifications or work under the terms of Section 1
above, provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices
stating that you changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in
whole or in part contains or is derived from the Program or any
part thereof, to be licensed as a whole at no charge to all third
parties under the terms of this License.
c) If the modified program normally reads commands interactively
when run, you must cause it, when started running for such
interactive use in the most ordinary way, to print or display an
announcement including an appropriate copyright notice and a
notice that there is no warranty (or else, saying that you provide
a warranty) and that users may redistribute the program under
these conditions, and telling the user how to view a copy of this
License. (Exception: if the Program itself is interactive but
does not normally print such an announcement, your work based on
the Program is not required to print an announcement.)

212
 This Document's License (GPL)

These requirements apply to the modified work as a whole. If

identifiable sections of that work are not derived from the Program,
and can be reasonably considered independent and separate works in
themselves, then this License, and its terms, do not apply to those
sections when you distribute them as separate works. But when you
distribute the same sections as part of a whole which is a work based
on the Program, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the
entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest
your rights to work written entirely by you; rather, the intent is to
exercise the right to control the distribution of derivative or
collective works based on the Program.
In addition, mere aggregation of another work not based on the Program
with the Program (or with a work based on the Program) on a volume of
a storage or distribution medium does not bring the other work under
the scope of this License.
3. You may copy and distribute the Program (or a work based on it,
under Section 2) in object code or executable form under the terms of
Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable
source code, which must be distributed under the terms of Sections
1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three
years, to give any third party, for a charge no more than your
cost of physically performing source distribution, a complete
machine-readable copy of the corresponding source code, to be
distributed under the terms of Sections 1 and 2 above on a medium
customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer
to distribute corresponding source code. (This alternative is
allowed only for noncommercial distribution and only if you
received the program in object code or executable form with such
an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for
making modifications to it. For an executable work, complete source
code means all the source code for all modules it contains, plus any
associated interface definition files, plus the scripts used to
control compilation and installation of the executable. However, as a
special exception, the source code distributed need not include
anything that is normally distributed (in either source or binary
form) with the major components (compiler, kernel, and so on) of the
operating system on which the executable runs, unless that component
itself accompanies the executable.
If distribution of executable or object code is made by offering
access to copy from a designated place, then offering equivalent
access to copy the source code from the same place counts as
distribution of the source code, even though third parties are not
compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program
except as expressly provided under this License. Any attempt
otherwise to copy, modify, sublicense or distribute the Program is
void, and will automatically terminate your rights under this License.
However, parties who have received copies, or rights, from you under

213
 This Document's License (GPL)

this License will not have their licenses terminated so long as such
parties remain in full compliance.
5. You are not required to accept this License, since you have not
signed it. However, nothing else grants you permission to modify or
distribute the Program or its derivative works. These actions are
prohibited by law if you do not accept this License. Therefore, by
modifying or distributing the Program (or any work based on the
Program), you indicate your acceptance of this License to do so, and
all its terms and conditions for copying, distributing or modifying
the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the
Program), the recipient automatically receives a license from the
original licensor to copy, distribute or modify the Program subject to
these terms and conditions. You may not impose any further
restrictions on the recipients' exercise of the rights granted herein.
You are not responsible for enforcing compliance by third parties to
this License.
7. If, as a consequence of a court judgment or allegation of patent
infringement or for any other reason (not limited to patent issues),
conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot
distribute so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you
may not distribute the Program at all. For example, if a patent
license would not permit royalty-free redistribution of the Program by
all those who receive copies directly or indirectly through you, then
the only way you could satisfy both it and this License would be to
refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under
any particular circumstance, the balance of the section is intended to
apply and the section as a whole is intended to apply in other
circumstances.
It is not the purpose of this section to induce you to infringe any
patents or other property right claims or to contest validity of any
such claims; this section has the sole purpose of protecting the
integrity of the free software distribution system, which is
implemented by public license practices. Many people have made
generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that
system; it is up to the author/donor to decide if he or she is willing
to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to
be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in
certain countries either by patents or by copyrighted interfaces, the
original copyright holder who places the Program under this License
may add an explicit geographical distribution limitation excluding
those countries, so that distribution is permitted only in or among
countries not thus excluded. In such case, this License incorporates
the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions
of the General Public License from time to time. Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.

214
 This Document's License (GPL)

Each version is given a distinguishing version number. If the Program

specifies a version number of this License which applies to it and "any
later version", you have the option of following the terms and conditions
either of that version or of any later version published by the Free
Software Foundation. If the Program does not specify a version number of
this License, you may choose any version ever published by the Free Software
Foundation.
10. If you wish to incorporate parts of the Program into other free
programs whose distribution conditions are different, write to the author
to ask for permission. For software which is copyrighted by the Free
Software Foundation, write to the Free Software Foundation; we sometimes
make exceptions for this. Our decision will be guided by the two goals
of preserving the free status of all derivatives of our free software and
of promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest
to attach them to the start of each source file to most effectively
convey the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.

215
 This Document's License (GPL)

You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA

Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this
when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
This is free software, and you are welcome to redistribute it
under certain conditions; type `show c' for details.
The hypothetical commands `show w' and `show c' should show the appropriate
parts of the General Public License. Of course, the commands you use may
be called something other than `show w' and `show c'; they could even be
mouse-clicks or menu items--whatever suits your program.
You should also get your employer (if you work as a programmer) or your
school, if any, to sign a "copyright disclaimer" for the program, if
necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program
`Gnomovision' (which makes passes at compilers) written by James Hacker.
<signature of Ty Coon>, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into
proprietary programs. If your program is a subroutine library, you may
consider it more useful to permit linking proprietary applications with the
library. If this is what you want to do, use the GNU Library General
Public License instead of this License.

216