Borouge HOE444NP

Polypropylene HOE444NP
Product Data Sheet

March 2015
Polypropylene
HOE444NP
Homopolymer for Injection Moulding
DESCRIPTION
HOE444NP is a versatile polypropylene homopolymer intended for injection
moulding. This product shows very good stiffness and toughness , This grade is
a Near Prime material.
APPLICATIONS
Closures
House ware
Garden furniture
SPECIAL FEATURES
Good flow behavior
High stiffness
PHYSICAL PROPERTIES
Property Typical Value Test Method
----------------------------------------------------------------------------------------------------------------------------
Density 900-910 kg/m³ ISO 1183
Melt Flow Rate (230 °C/2,16 kg) 30 g/10min ISO 1133
Tensile Modulus (1 mm/min) 1550 MPa ISO 527-2
Tensile Strain at Yield (50 mm/min) 9% ISO 527-2
Tensile Stress at Yield (50 mm/min) 34.5 MPa ISO 527-2
Flexural modulus (5 mm/min) 1550 MPa ISO 178
Tensile Strain at Yield 9% ASTM D738
Tensile Stress at Yield 34.5 MPa ASTM D738
Flexural modulus (by 1% secant) 1600 MPa ASTM D790 A

Charpy Impact Strength, notched (23 °C) 3.5 kJ/m² ISO 179/1eA
IZOD Impact Strength, notched (23 °C) 35 J/m ASTM D256
Heat Deflection Temperature (0,45 N/mm²)* 88 °C ISO 75-2
Vicat Softening Temperature (Method A) ** 145 °C ISO 306
Hardness, Rockwell (R-scale) 105 ISO 2039-2
*Data should not be used for specification work
* Measured on injection moulded specimens acc. to ISO 1873-2
** Measured on injection moulded specimens, conditioned at 23°C and 50% Rel. Hum.
PROCESSING TECHNIQUES
This product is easy to process with standard injection moulding machines.
Following moulding parameters should be used as guidelines:
Melt temperature 220 - 260 °C
Holding pressure 200 - 500 bar As required to avoid sink marks.
Mould temperature 20 - 40 °C
Injection speed High
Shrinkage 1 - 2 %, depending on wall thickness and moulding parameters
STORAGE
HOE444NP should be stored in dry conditions at temperatures below 50°C and

protected from UV-light. Improper storage can initiate degradation, which results in odor
generation and
color changes and can have negative effects on the physical properties of this product.
More information on storage can be found in Safety Information Sheet (SIS) for this product.
SAFETY
The product is not classified as a hazardous preparation.
Please see our Safety Information Sheet (SIS) for details on various aspects of safety, recovery
and disposal of the product, for more information contact your Borouge representative.
RECYCLING
The product is suitable for recycling using modern methods of shredding and cleaning. In-house
production waste should be kept clean to facilitate direct recycling.
RELATED DOCUMENTS
The following related documents are available on request, and represent various aspects on the
usability, safety, recovery and disposal of the product.
Safety Information Sheet
Statement on chemicals, regulations and standards
Statement on compliance to food contact regulations

DISCLAIMER
The product(s) mentioned herein are not intended to be used for medical, pharmaceutical or
healthcare applications and we do not support their use for such applications.
To the best of our knowledge, the information contained herein is accurate and reliable as of the date of
publication, however we do not assume any liability whatsoever for the accuracy and completeness of such
information.
Borouge makes no warranties which extend beyond the description contained herein. Nothing
herein shall constitute any warranty of merchantability or fitness for a particular purpose.
It is the customer's responsibility to inspect and test our products in order to satisfy itself as to the
suitability of the products for the customer's particular purpose. The customer is responsible for
the appropriate, safe and legal use, processing and handling of our products.
No liability can be accepted in respect of the use of Borouge products in conjunction with other materials.
The information contained herein relates exclusively to our products when not used in conjunction with any
third party materials.

Borouge HOE444NP

Uploaded by

Copyright:

Available Formats

Borouge HOE444NP

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Borouge HOE444NP

Uploaded by

Copyright:

Available Formats

Polypropylene HOE444NP

Product Data Sheet

a Near Prime material.

Density 900-910 kg/m³ ISO 1183

Melt Flow Rate (230 °C/2,16 kg) 30 g/10min ISO 1133

Tensile Modulus (1 mm/min) 1550 MPa ISO 527-2

Tensile Strain at Yield (50 mm/min) 9% ISO 527-2

Tensile Stress at Yield (50 mm/min) 34.5 MPa ISO 527-2

Flexural modulus (5 mm/min) 1550 MPa ISO 178

Tensile Strain at Yield 9% ASTM D738

Tensile Stress at Yield 34.5 MPa ASTM D738

Flexural modulus (by 1% secant) 1600 MPa ASTM D790 A

IZOD Impact Strength, notched (23 °C) 35 J/m ASTM D256

Heat Deflection Temperature (0,45 N/mm²)* 88 °C ISO 75-2

Vicat Softening Temperature (Method A) ** 145 °C ISO 306

Hardness, Rockwell (R-scale) 105 ISO 2039-2

*Data should not be used for specification work

* Measured on injection moulded specimens acc. to ISO 1873-2

Following moulding parameters should be used as guidelines:

Melt temperature 220 - 260 °C

Holding pressure 200 - 500 bar As required to avoid sink marks.

Injection speed High

Shrinkage 1 - 2 %, depending on wall thickness and moulding parameters

HOE444NP should be stored in dry conditions at temperatures below 50°C and

Safety Information Sheet

Statement on chemicals, regulations and standards

Statement on compliance to food contact regulations

You might also like