REFLEX GAGES QUEST-TEC GLASS-TRAC

Glass-Trac Reflex Gages use prism glass to provide

an excellent indication of the liquid level. All liquids
MATERIALS
appear black in contrast to the mirror-like surface Body (Liquid Chamber): Accurately machined
above. The clean line of separation can be sighted from square tubes to provide perfect seating for
from many yards away. Reflex Gages are made in gage glasses. Glass is recessed for protection.
three pressures series (maximum 4000 psig @100°F) Body materials include 316 stainless steel and
and are tapped for ½” or ¾” NPT connections. carbon steel.
The standard Glass-Trac level gages are
designed for minimum -20°F service. Cover: Glass-Trac gage covers are made of
carbon steel or 316 stainless steel in all sizes
On Glass-Trac Reflex Close Hook-Up Gages with ½” and pressure ratings for higher strength and
NPT connections, the center-to-center dimension is dependable service. All covers are machined to
the same as the overall length on a standard gage. provide recessed seating protection for the glass.
On Close Hook-Up Gages with ¾” NPT connections,
the center-to-center dimension is the same as the Glass: All standard Glass-Trac Reflex Gages use
overall length on standard gages plus 3/8”. tempered borosilicate glass in nine standard
lengths. Each glass has expertly molded reflecting
prisms.

Gaskets: High grade non-asbestos is used in

gaskets and cushions for Glass-Trac gages. The
machined recess in the gage body and cover
protects the gasket and cushion as well as the glass.

Bolts: Glass-Trac gage bolts are made of alloy steel,

ASTM A-193 Grade B7.

Nuts: Gage nuts are made of steel, ASTM A-194

Grade 2H.

(Torque instructions for gage bolts are on the back cover)

Typical Reflex
Top/Bottom

Typical Reflex

Close Hook Up
 MODEL CODE BREAKDOWN
PRESSURE RATINGS & DIMENSIONS
Denotes Window Special Features
Glass Size Close Hook‐Up: CH
1 thru 9 Large Chamber: LC
Non‐Frost Extensions: FP
7 2 ‐ RL FP CH Kel‐F Shield: K
Electrically Heated: E
External Heated: HC
Mica Shield: M
Internal Heating: T
Explosions Proof Illuminator: EP

Type of Glass Series

Number of Sections Low Pressure: L
Reflex= R
Medium Pressure: M
Transparent =T
High Pressure: H
Weld Pad: WP

REFLEX GAGES
SIZE & WEIGHTS
SIZE NUMBERS OVER‐ALL LENGTH (IN.) VISIBLE GLASS CLOSE HOOK‐UP
CENTER‐TO‐CENTER (IN.)
APPROX. WT.
GLASS SIZE
(LBS.)
(IN.) C
LOW MID PRESS. HIGH A (STD)* A (CH) A (CH) B D D LOW MID‐HIGH
PRESS. PRESS. ½” OR ¾” ½” NPT ¾” NPT ½” NPT ¾” NPT PRESS. PRESS.
NPT

SINGLE‐SECTION GAGE
11RL 11RM 11RH 5.25 8.875 9.25 3.75 3.75 5.25 5.625 7 8
21RL 21RM 21RH 6.25 9.875 10.25 4.75 4.75 6.25 6.625 8 9
31RL 31RM 31RH 7.25 10.875 11.25 5.75 5.75 7.25 7.625 9 11
41RL 41RM 41RH 8.25 11.875 12.25 6.75 6.75 8.25 8.625 10 12
1RL 51RM 51RH 9.375 13 13.375 7.875 7.875 9.375 9.75 12 14
61RL 61RM 61RH 10.625 14.25 14.625 9.125 9.125 10.625 11 14 16
71RL 71RM 71RH 11.75 15.375 15.75 10.25 10.25 11.75 12.125 15 18
81RL 81RM 81RH 13.375 17 17.375 11.875 11.875 13.375 13.75 17 20
91RL 91RM 91RH 14.125 17.75 18.125 12.625 12.625 14.125 14.5 18 21

TWO‐SECTION GAGE
32RL 32RM 32RH 14.5 18.125 18.5 13 5.75 14.5 14.875 19 22
42RL 42RM 42RH 16.5 20.125 20.5 15 6.75 16.5 16.875 22 25
52RL 52RM 52RH 18.75 22.375 22.75 17.25 7.875 18.75 19.125 24 28
62RL 62RM 62RH 21.25 24.875 25.25 19.75 9.125 21.25 21.625 27 32
72RL 72RM 72RH 23.5 27.25 27.5 22 10.125 23.5 23.875 29 35
82RL 82RM 82RH 26.75 30.375 30.75 25.25 11.875 26.75 27.125 34 40
92RL 92RM 92RH 28.25 31.875 32.25 26.75 12.625 28.25 28.625 37 43

THREE‐SECTION GAGE
63RL 63RM 63RH 31.875 35.5 35.875 30.375 9.125 31.875 32.25 41 48
73RL 73RM 73RH 35.25 38.875 39.25 33.75 10.25 35.25 35.875 45 53
83RL 83RM 83RH 40.125 43.75 44.125 38.625 11.875 40.125 40.5 52 60
93RL 93RM 93RH 42.375 46 46.375 40.875 12.625 42.375 42.75 55 64

FOUR‐SECTION GAGE
74RL 74RM 74RH 47 50.875 51 45.5 10.25 47 47.375 60 71
84RL 84RM 84RH 53.5 57.125 57.5 52 11.875 53.5 53.875 69 80
94RL 94RM 94RH 56.5 60.125 60.5 55 12.625 56.5 56.875 72 85

FIVE‐SECTION GAGE
75RL 75RM 75RH 58.25 62.375 62.75 57.25 10.25 58.75 59.125 74 88
85RL 85RM 85RH 66.875 70.5 70.875 65.375 11.875 66.875 67.25 86 100
95RL 95RM 95RH 70.625 74.25 74.625 69.125 12.625 70.625 71 90 106

*3/4” NPT Tapped High Pressure Gages Add 1‐1/2” to ‘A’ Dimension
 REFLEX GAGES CONNECTIONS
Reflex Gages -Straight Thru Connections

Item No. Name Material

1 Chamber Carbon Steel
2 Cover Carbon Steel
3 Glass Tempered
4 Gasket Non-Asbestos
5 Cushion Non-Asbestos
6 Bolt ASTM A193 B7
7 Nut ASTM A193 B7

Section “X-X” Section “X-X”

Low Pressure Mid/High Pressure

Pressure Ratings At °F*

Reflex Gages ‐Close Hook‐Up Connections Low Pressure Gage**
100°F 200°F 300°F 400°F 500°F 600°F 700°F
Size

1 2400 2320 2240 2150 2000 1780 1520

2 2325 2250 2170 2090 1940 1720 1470

3 2250 2180 2100 2020 1880 1670 1420

4 2175 2100 2020 1940 1820 1600 1370

5 2100 2030 1960 1880 1750 1550 1320

6 2025 1950 1890 1810 1680 1500 1280

7 1950 1890 1820 1750 1630 1440 1230

8 1875 1820 1750 1680 1560 1390 1180

Section “X-X” Section “X-X”
Low Pressure Mid/High Pressure 9 1800 1740 1680 1620 1510 1340 1140

Mid-Pressure Gage**
100°F 200°F 300°F 400°F 500°F 600°F 700°F
Size

1 3000 2900 2800 2690 2500 2220 1890

2 2910 2820 2720 2600 2420 2150 1840

3 2820 2720 2625 2530 2350 2080 1780

4 2725 2640 2560 2460 2270 2040 1740

5 2630 2540 2460 2360 2190 1950 1660

6 2535 2450 2360 2270 2110 1875 1600

7 2440 2360 2280 2190 2030 1805 1540

8 2345 2270 2190 2110 1960 1740 1480

9 2250 2180 2100 2020 1880 1670 1420

High Pressure Gage**

100°F 200°F 300°F 400°F 500°F 600°F 700°F

Size

ALL 4000 3890 3790 3700 3470 3080 2530

**Gages for service up to 800°F are available. Consult QTS for

applications and ratings
**Saturated steam to 300 WSP. Above 300 WSP, use transparent gage
STANDARD CLOSE HOOK-UP with mica shields.
 INSTALLATION: STANDARD GAGES
(TOP/BOTTOM CONNECTION)

Note: Use the following constants for other level gages.

1. Low pressure (series L) large chamber, add 1” to dimensions “A” and “D”
(VISIBLE GLASS)
(GAGE OVERALL)
(CENTERS)

2. Low pressure (series L), mid pressure (series M) externally heated/ cooled,
‘
‘
‘

add 2-1/4” to above “D” dimensions

3. For valve Types 3, 5, or 7 add 7/8” to Column “D” to obtain minimum centers

4. For High Pressure (series H) with ¾” NPT, add 1 ½” to dimensions “A” and “D”

5. For a ½” NPT Female Spherical Gage Connection add 1-7/8”

D*
MINIMUM VALVE CENTER-TO-CENTER
SIZE NO. WITH GAGE CONNECTION
A B C FOR GAGES FOR GAGES
GAGE VISIBLE VISIBLE TAPPED 1/2" NPT TAPPED 3/4" NPT
OVERALL GLASS GLASS ** 1/2"- ** 1/2"-
**3/4"-NPT 3/4"-NPT
NPT NPT 1/2"-NPT 1/2"-NPT 3/4"-NPT 3/4"-NPT
FEMALE FEMALE
GLASS NO. FEMALE FEMALE MALE MALE MALE MALE
SCREWED SCREWED
NO. SECT. SCREWED SCREWED UNION SPHERICAL
CAT. 1S, 2S, CAT. 1U, 2U,
UNION SPHERICAL
CAT. 1S, 2S. CAT. 1U, 2U. FIG. VIII FIG. XIV FIG. XI FIG. X
4S 4U 4S 4U

1 1 5 1/4 3 3/4 3 3/4 8 1/2 11 11 5/8 12 3/4 8 3/4 11 5/8 11 1/2 12 5/8
2 1 6 1/4 4 3/4 4 3/4 9 1/2 12 12 5/8 13 3/4 9 3/4 12 5/8 12 1/2 13 5/8
3 1 7 1/4 5 3/4 5 3/4 10 1/2 13 13 5/8 14 3/4 10 3/4 13 5/8 13 1/2 14 5/8
4 1 8 1/4 6 3/4 6 3/4 11 1/2 14 14 5/8 15 3/4 11 3/4 14 5/8 14 1/2 15 5/8
5 1 9 3/8 7 7/8 7 7/8 12 5/8 15 1/8 15 3/4 16 7/8 12 7/8 15 3/4 15 5/8 16 3/4
6 1 10 5/8 9 1/8 9 1/8 13 7/8 16 3/8 17 18 1/8 14 1/8 17 16 7/8 18
7 1 11 3/4 10 1/4 10 1/4 15 17 1/2 18 1/8 19 1/4 15 1/4 18 1/8 18 19 1/8
8 1 13 3/8 11 7/8 11 7/8 16 5/8 19 1/8 19 3/4 20 7/8 16 7/8 19 3/4 19 5/8 20 3/4
9 1 14 1/8 12 5/8 12 5/8 17 3/8 19 7/8 20 1/2 21 5/8 17 5/8 20 1/2 20 3/8 21 1/2
3 2 14 1/2 13 5 3/4 17 3/4 20 1/4 20 7/8 22 18 20 7/8 20 3/4 21 7/8
4 2 16 1/2 15 6 3/4 19 3/4 22 1/4 22 7/8 24 20 22 7/8 22 3/4 23 7/8
5 2 18 3/4 17 1/4 7 7/8 22 24 1/2 25 1/8 26 1/4 22 1/4 25 1/8 25 26 1/8
6 2 21 1/4 19 3/4 9 1/8 24 1/2 27 27 5/8 28 3/4 24 3/4 27 5/8 27 1/2 28 5/8
7 2 23 1/2 22 10 1/4 26 3/4 29 1/4 29 7/8 31 27 29 7/8 29 3/4 30 7/8
8 2 26 3/4 25 1/4 11 7/8 30 32 1/2 33 1/8 34 1/4 30 1/4 33 1/8 33 34 1/8
9 2 28 1/4 26 3/4 12 5/8 31 1/2 34 34 5/8 35 3/4 31 3/4 34 5/8 34 1/2 35 5/8
6 3 31 7/8 30 3/8 9 1/8 35 1/8 37 5/8 38 1/4 39 3/8 35 5/8 38 1/4 38 1/8 39 1/4
7 3 35 1/4 33 3/4 10 1/4 38 1/2 41 41 5/8 42 3/4 38 3/4 41 5/8 41 1/2 42 5/8
8 3 40 1/8 38 5/8 11 7/8 43 3/8 45 7/8 46 1/2 47 5/8 43 5/8 46 1/2 46 3/8 47 1/2
9 3 42 3/8 40 7/8 12 5/8 45 5/8 48 1/8 48 3/4 49 7/8 45 7/8 48 3/4 48 5/8 49 3/4
7 4 47 45 1/2 10 1/4 50 1/4 52 3/4 53 3/8 54 1/2 50 1/2 53 5/8 53 1/4 54 3/8
8 4 53 1/2 52 11 7/8 56 3/4 59 1/4 59 7/8 61 57 59 7/8 59 3/4 60 7/8
9 4 56 1/2 55 12 5/8 59 3/4 62 1/4 62 7/8 64 60 62 7/8 62 3/4 63 7/8
7 5 58 3/4 57 1/4 10 1/4 62 64 1/2 65 1/8 66 1/4 62 1/4 65 1/8 65 66 1/8
8 5 66 7/8 65 3/8 11 7/8 70 1/8 12 5/8 73 1/4 74 3/8 70 3/8 73 1/4 73 1/8 74 1/4
9 5 70 5/8 69 1/8 12 5/8 73 7/8 76 3/8 77 78 1/8 74 1/8 77 76 7/8 78
8 6 80 1/4 78 3/4 11 7/8 83 1/2 86 86 5/8 87 3/4 83 3/4 86 5/8 86 1/2 87 5/8
9 6 84 3/4 83 1/4 12 5/8 88 90 1/2 91 1/8 92 1/4 88 1/4 91 1/8 91 92 1/8
8 7 93 5/8 92 1/8 11 7/8 96 7/8 99 3/8 100 101 1/8 97 1/8 100 99 7/8 101
9 7 98 7/8 97 3/8 12 5/8 102 1/8 104 5/8 105 1/4 106 3/8 102 3/8 105 1/4 105 1/8 106 1/4
8 8 107 105 1/2 11 7/8 110 1/4 112 3/4 113 3/8 114 1/2 110 1/2 113 3/8 113 1/4 114 3/8
9 8 113 111 1/2 12 5/8 116 1/4 118 3/4 119 3/8 120 1/2 116 1/2 119 3/8 119 1/4 120 3/8
8 9 120 3/8 118 7/8 11 7/8 123 5/8 126 1/8 126 3/4 127 7/8 123 7/8 126 3/4 126 5/8 127 3/4
9 9 127 1/8 125 5/8 12 5/8 130 3/8 132 7/8 133 1/2 134 5/8 130 5/8 133 1/2 133 3/8 134 1/2

*Dimensions in column “D” apply to low-pressure (series L), mid-pressure (series M), ½” NPT high-pressure (series H), frost free (all series), and internally heated/cooled reflex
and transparent level gages tapped ½” NPT or ¾” NPT. For installation dimensions on other level gages see footnote.
**These dimensions use close pipe nipples. For short ½” nipple add ¾”, for short ¾” nipple add 1-1/4”
 INSTALLATION: CLOSE HOOK-UP GAGES
(SIDE/SIDE CONNECTED GAGE CONNECTIONS)

MINIMUM CENTER-TO-CENTER TANK CONNECTIONS

SIZE
STRAIGHT-THRU OFFSET VALVE HANDLES OFFSET VALVE HANDLES
NO.
1/2" VALVE 3/4" 1/ 2" INSIDE 3/ 4" 1/ 2" OUTSIDE 3/ 4"

11 5 1/4" 5 5/8" 3 1/2" 3 7/8" 7" 7 3/8"

21 6 1/4" 6 5/8" 4 1/2" 4 7/8" 8" 8 3/8"
31 7 1/4" 7 5/8" 5 1/2" 5 7/8" 9" 9 3/8"
41 8 1/4" 8 5/8" 6 1/2" 6 7/8" 10" 10 3/8"
51 9 3/8" 9 3/4" 7 5/8" 8" 11 1/8" 11 1/2"
61 10 5/8" 11" 8 7/8" 9 1/4" 12 3/8" 12 3/4"
71 11 3/4" 12 1/8" 10" 10 3/8" 13 1/2" 13 7/8"
81 13 3/8" 13 3/4" 11 5/8" 12" 15 1/8" 15 1/2"
91 14 1/8" 14 1/2" 12 3/8" 12 3/4" 15 7/8" 16 1/4"
32 14 1/2" 14 7/8" 12 3/4" 13 1/8" 16 1/4" 16 5/8"
42 16 1/2" 16 7/8" 14 3/4" 15 1/8" 18 1/4" 18 5/8"
52 18 3/4" 19 1/8" 17" 17 3/8" 20 1/2" 20 7/8"
62 21 1/4" 21 5/8" 19 1/2" 19 7/8" 23" 23 3/8"
72 23 1/2" 23 7/8" 21 3/4" 22 1/8" 25 1/4" 25 5/8"
82 26 3/4" 27 1/8" 25" 25 3/8" 28 1/2" 28 7/8"
92 28 1/4" 28 5/8" 26 1/2" 26 7/8" 30" 30 3/8"
63 31 7/8" 32 1/4" 30 1/8" 30 1/2" 33 5/8" 34"
73 35 1/4" 35 5/8" 33 1/2" 33 7/8" 37" 37 3/8"
83 40 1/8" 40 1/2" 38 3/8" 38 3/4" 41 7/8" 42 1/4"
93 42 3/8" 42 3/4" 40 5/8" 41" 44 1/8" 44 1/2"
74 47" 47 3/8" 45 1/4" 45 5/8" 48 3/4" 49 1/8"
84 53 1/2" 53 7/8" 51 3/4" 52 1/8" 55 1/4" 55 5/8"
94 56 1/2" 56 7/8" 54 3/4" 55 1/8" 58 1/4" 58 5/8"
75 58 3/4" 59 1/8" 57" 57 3/8" 60 1/2" 60 7/8"
85 66 7/8" 67 1/4" 65 1/8" 65 1/2" 68 5/8" 69"
95 70 5/8" 71" 68 7/8" 69 1/8" 72 3/8" 72 3/4"
86 80 1/4" 80 5/8" 78 1/2" 78 7/8" 82" 82 3/8"
96 84 3/4" 85 1/8" 83" 83 3/8" 86 1/2" 86 7/8"
87 93 5/8" 94" 91 7/8" 92 1/4" 95 3/8" 95 3/4"
97 98 7/8" 99 1/4" 97 1/8" 97 1/2" 100 5/8" 101"
88 107" 107 3/8" 105 1/4" 105 5/8" 108 3/4" 109 1/8"
98 113" 113 3/8" 111 1/4" 111 5/8" 114 3/4" 115 1/8"
89 120 3/8" 120 3/4" 118 5/8" 119" 122 1/8" 122 1/2"
99 127 1/8" 127 1/2" 125 3/8" 125 3/4" 128 7/8" 129 1/4"