Scribd
Upload
26 views

Network Protocols Lab Manual - Lab 10

Uploaded by

Atha Mohammed
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
26 views

Network Protocols Lab Manual - Lab 10

Uploaded by

Atha Mohammed
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 14

10.

DNS, SMTP, FTP, and WEB Server configuration

Objective
• Perform basic configuration tasks on a router
• Configure DNS Server on packet tracer
• Configure Web Server on packet tracer
• Configure Mail Server (SMTP) on packet tracer
• Configure FPT Server on packet tracer
•

• Save the VLAN configuration

Addressing Table

Device IP address Subnet Mask URL


PC0 10.0.0.10 255.0.0.0
PC1 192.168.1.10 255.255.255.0
PC2 192.168.1.11 255.255.255.0
DNS-Server 10.0.0.2 255.0.0.0
WEB Server 10.0.0.3 255.0.0.0 www.webserver.com
SMTP Server 10.0.0.4 255.0.0.0 www.smtpserver.com
FTP Server 10.0.0.5 255.0.0.0 www.ftpserver.com
Step 1: Cable a network that is similar to the one in the topology diagram.
You can use any current switch& routers in your lab as long as it has the required interfaces shown in the
topology. Note: If you use 2900 or 2950 switches, the outputs may appear different. Also, certain commands
may be different or unavailable.

Step 2 Configure the router ports as following


Port IP address Subnet Mask
Fa 0/0 10.0.0.1 255.0.0.0
Fa0/1 192.168.1.1 255.255.255.0

Step 3 Configure the PC hosts as following


Port IP address Subnet Mask Gateway DNS server
PC0 10.0.0.10 255.0.0.0 10.0.0.1 10.0.0.2
PC1 192.168.1.10 255.255.255.0 192.168.1.1 10.0.0.2
PC2 192.168.1.11 255.255.255.0 192.168.1.1 10.0.0.2

Task 3: Configure DNS Server


Step 1: change the Server title to “DNS”.
Step 2: Configure the address of the DNS Server as following
Form Desktop > IP Configuration

Assign the address as the above.


Step 3: do the following Process to add the following names (URL) & addresss to the DNS Server
• Click on DNS Server
• Go to Serveries>DNS
o In Name field type : www.WEBServer.com
o In Address Field type: 10.0.0.3
o Press the Tab: ADD
o In Name field type : www.SMTPServer.com
o In Address Field type: 10.0.0.4
o Press the Tab: ADD
o In Name field type : www.FTPServer.com
o In Address Field type: 10.0.0.5
o Press the Tab: ADD
Task 3: Configure WEB Server
Step 1: change the Server title or Name to “WEB”.
Step 2: Configure the address of the Web server as following
Form Desktop > IP Configuration
Step 3: Enable the HTTP Services
Services > HTTP

• Make Sure HTTP & HTTPS Tab is ON


• You can modify or Edit the First Page (Index.HTML) by press on (edit)
Task 4: Configure SMTP Server
• Step 1: change the Server title or Name to “SMTP”.
• Step 2: Configure the address of the FTP server as following
• Form Desktop > IP Configuration
Step 3: Enable the Email Services
Services > Email

• Make Sure SMTP & POP3 is On


• In Domain Name Tab: mail.com or write any domain you like then Press Set Button
• In User Field write any user name like: Mohammed
• In Password Field write any password for Mohammed like :123
• Press + to add the user
• Repeat these steps to add more users.
Task 5: Configure FTP Server
• Step 1: change the Server title or Name to “FTP”.
• Step 2: Configure the address of the FTP server as following
• Form Desktop > IP Configuration
Step 3: Enable FTP Services
Services > FTP

• Make sure that FTP Services is ON.


• To add FTP User
o In Username field write : Mohammed
o In Password Field write :123
o Assign the permission to the user by choose Write , Read ,Delete ,Rename or List
o Press Add Button.
o Repeat to add more users.
Task 6: Testing Servers
Step 1: Test DNS Server

Ping All Server using their name from any PC like

PC2>Ping www.webserver.com

PC1>Ping www.smtpserver.com

Step 2: Test Web Server

• From any PC Open Web Browser as following Desktop > Web Browser
• In URL write: www.webserver.com
• Press Go Butoon
• You can see now index page
Step 3: Test FTP Server

• From any PC Open Command Prompt Desktop > Command prompt


• Write FTP www.ftpserver.com
• Enter username & password
• type Dir in command prompts to list all files or ? to see the available FTP commands.
Step 3: Test Email Server

• From any PC Open Email , Desktop > Email


• Configure email screen appear enter the following

• Then Press Save


• you can assign an email for each PC
• to Send Email choose Compose Button
You can send any email to any defined email user

You might also like