Tinuvin 765

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

Ciba Specialty Chemicals

Additives

Lubricant Additives

® ®
Ciba TINUVIN 765 Light stabilizer

Typical chemical and TINUVIN 765 ,TINUVIN 320 and CHIMASSORB 81 are ashless light stabilizers for lubricating
physical properties oils

CHIMASSORB 81 TINUVIN 320 TINUVIN 765


2-hydroxy-4-n- Benzotriazole Mixture of hindered
octyloxy derivative amine light stabilisers
benzophenone (HALS)

OH OH O
N
CH N O-C-(CH )
3 2 4
C OR N
2
O N
+
O
C H3 N O-C-(CH2) COOCH3
8

Appearance Pale yellow powder Pale yellow Clear, slightly yellow


crystalline powder liquid
Melting point (°C) 48-49 152-155 -
Viscosity at 20 °C
(mPa.s) - - 400
Density 25 °C(g/cm3) 1.16 (1) 1.18 (1) 0.99 at 20 °C
Flash point (°C) > 200, PM (2) 215 , Marcusson 92 , PM (2)
Solubility (%)
Water < 0.01 < 0.01 < 0.01
Mineral oil >5 1 >5

(1) ASTM D 2638-helium pyknometer (2) Pensky-Martens method

Applications and Mineral oils exposed to UV and daylight where oil film thickness is :
typical treat levels greater than 100 microns (CHIMASSORB 81 and TINUVIN 320) } 0.05-0.1%
recommended less than 100 microns (TINUVIN 765) }

Benefits - Prevents lubricant films from photo oxidation (discolouration)


- Offers good solubility in mineral oil
- Protection against thermooxidation and UV light when used in combination with
Irganox L antioxidants

Restriction TINUVIN 765 may crystallise if stored below 0 °C, but can be easily liquefied by slight warming

Date first Edition: April, 1996 Product Name: TINUVIN 765 page 1 of 3
Printing Date: July, 1997
Performance benefits: Lubricant protection

Colour stabilisation Addition of low concentrations of TINUVIN 765 reduces the rate of colour development in
various process oils at elevated temperature.

Test fluids TINUVIN 765 (%) 0.1


Base oils (A to D) (1) neat balance

Open beaker test Colour (ASTM D 1500)


Temperature 120 °C for 28 8
days
7

0
0 2 4 14 28
Days
A A+Tinuvin 765
B B+Tinuvin 765
C C+Tinuvin 765
D D+Tinuvin 765

(1) Base oil characteristics A B C D


C (aromatic) (%) 11,4 5,3 10,0 11,7
Sulphur (ppm) 400 520 510 8200
N (total) (ppm) 135 162 20 122
N (basic) (ppm) 16 4 9 61

Note: At the end of the test a deposit or haze was observed. It is recommended that an Irganox L
phenolic antioxidant be added in order to avoid this problem.

Date first Edition: April, 1996 Product Name: TINUVIN 765 page 2 of 3
Printing Date: July, 1997
Safety and Handling Please read Material Safety Data Sheet ( MSDS ) before handling.

Product Specification This information is available on request through our local representative.

Packaging This information is available on request through our local representative.

Quality Policy The objective of our quality policy is the continuous fulfilment of the internal and external
requirements agreed upon with our partners with regards to everybody’s performance.
As an integral part of the way we conduct our business, we want to focus all the activities of
Additives Division in the realm of Research, Development, Production, Marketing and
Administration on
- fulfilling continuously agreed upon requirements the first time around
- identifying and eliminating possible defects as early as possible
The Quality System of Additives Division is based on the principles of the
SN-ISO-Standard 9001 / EN 29001.
By means of training and information, all employees are to be familiarised with the divisional
quality principles and, consequently, to commit them to acting correspondingly in their area
of responsibility.

Important The following supercedes Buyer’s documents. SELLER MAKES NO REPRESENTATION


OR WARRANTY, EXPRESS OR IMPLIED, INCLUDING OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. No statements herein are to be construed
as inducements to infringe any relevant patent. Under no circumstances shall Seller be
liable for incidental, consequential or indirect damages for alleged negligence, breach of
warranty, strict liability, tort or contract arising in connection with the product(s). Buyer’s
sole remedy and Seller’s sole liability for any claims shall be Buyer’s purchase price. Data
and results are based on controlled or lab work and must be confirmed by Buyer by testing
for its intended conditions of use. The product(s) has not been tested for, and is therefore
not recommended for, uses for which prolonged contact with mucous membranes,
abraded skin, or blood is intended; or for uses for which implantation within the human
body is intended.

Ciba Specialty Chemicals Inc. Business Unit Lubricant Additives


Additives Ciba Specialty Chemicals Inc., 1997
Reference AD7 Publ. No. 28998/96/e
CH-4002 Basle Edited in Switzerland

Date first Edition: April, 1996 Product Name: TINUVIN 765 page 3 of 3
Printing Date: July, 1997

You might also like