STM32WB

WIRELESS SERIES
Bluetooth 5.0 & IEEE 802.15.4

Deliver best-in class IoT solutions with built-in key storage, OTA firmware
updates and protocol concurrency control

A wireless dual-core brain Bluetooth® 5.0 & IEEE IP Protection

802.15.4 STM32WB devices offer device integrity
The STM32WB series is a and industrial IP protection features
The STM32WB SoC offers multi-
dual-core, multi-protocol and protocol stacks including Bluetooth® to meet manufacturers’ increasing
ultra-low-power 2.4 GHz MCU 5.0, OpenThread and ZigBee® 3.0 as demand for brand protection.
system-on-chip. well as standardized IEEE 802.15.4
It supports Bluetooth® 5.0 as protocols in Concurrent mode for best-
well as IEEE 802.15.4 protocols in-class RF performance and dedicated
core to radio activity provides SW
(in Single and Concurrent flexibility and better user experience.
modes) covering a wide
spectrum of IoT application Features Benefits
needs.
Based on ST’s best-in-class, Dual-core solution with independent clock trees ensures
Dual-core solution in a single die
real-time RF execution and optimized PCB and BOM
ultra-low-power MCU with wide TX: 5.2 mA, RX: 4.5 mA Extended battery life time. Perfect fit for coin cell battery
peripheral set, the STM32WB BLE: –96 dBm, 802.15.4: –100 dBm Comfortable and robust operating distance of connection
series reduces development Integrated balun, USB 2.0 crystal-less, LCD driver Reduces BOM cost and PCB footprint
time, BOM cost, and extends
OTA firmware updates, customer key storage Easy fleet maintenance, brand and IP protection
application battery life.
STM32WB inspires innovation. Note* Features availability or caracteristics depend on STM32WB reference

www.st.com/stm32wb
 STM32WB WIRELESS SERIES| BLUETOOTH 5.0 & IEEE 802.15.4

STM32WB55
STM32WB
BLOCK DIAGRAM HARDWARE TOOLS
This STM32 Nucleo pack is the most cost-effective way to
Memory
Control quickly get started developing STM32WB-based prototypes.
Up to 1-Mbyte
Power supply Arm® Cortex®-M4 Flash memory
1.7 to 3.6 V FPU/DSP 64 MHz
w/ DC/DC + LDO Up to 256-Kbyte SRAM
POR/PDR/PVD/BOR Boot ROM
Nested vector
Xtal oscillators interrupt
controller (NVIC) Secure boot loader
32 MHz (RF)
Memory protected
32.769 kHz (LSE) unit (MPU) Connectivity
JTAG/SW debug 2 x SPI, 2 x I²C
Internal RC oscillators
32 kHz+ 4 ~ 48 MHz + 1 x USART, LIN,
16 MHz (HSI) + Smartcard, IrDA
48 MHz ± 1% acc. Modem control Order code: P-NUCLEO-WB55
over V and T(°C) ART AcceleratorTM
RTC/AWU/CSS AHB Bus matrix
1 x ULP UART EMBEDDED SOFTWARE
2 x DMA 7 channels USB 2.0 FS - Xtal less The STM32CubeWB package includes the STM32Cube
PLL/FLL
Quad-SPI (XIP) hardware abstraction layer (HAL) and low-layer (LL)
SysTick timer Multi-protocol RF stack APIs peripheral drivers, a consistent set of middleware
SAI (full duplex)
2 watchdogs BluetoothTM 5 components (RTOS, USB, FatFS and STM32 touch
(WWDG/IWDG) Timers sensing), as well as Bluetooth 5.0, OpenThread and
IEEE 802 15.4
Up to
AES
4 x 16-bit 32-bit timers ZigBee 3.0 connectivity stacks. All embedded software
72 GPIOs
2 x ULP 16-bit timers components come with a full set of examples running on
Cyclic redundancy check STMicroelectronics boards.
Voltage scaling Sensing
(2 modes) 16-key capacitive touch
Arm® Cortex®-M0+
32 MHz Encryption/security

Analog
256-bit AES/PKA
SOFTWARE TOOLS
TRNG/PCROP STM32CubeMX
2 x ULP comparators Nested vector
interrupt FUS/CKS Enables faster development thanks to
1 x 12-bit ADC controller (NVIC)
SAR 4.25 Msps its MCU pinout and clock configurator,
Display
Temperature sensor 8 x 40 LCD driver
power consumption calculator and code
generation tools.
STM32CubeIDE
STANDARD PROTOCOL Is an Eclipse-based IDE which integrates
the features of the STM32CubeMX
configuration tool.
STM32CubeMonRF
Is a development tool dedicated to
wireless connectivity which helps reduce
STM32WB PORTFOLIO time-to-market by enabling radio testing
Flash memory / RAM size (bytes) and beaconing.
1 M / 256 K STM32WB55CG STM32WB55RG STM32WB55VG
STM32CubeProg
1 M / 128 K STM32WB50CG Is an all-in-one software tool for
programming STM32 devices which can
512 K / 256 K STM32WB55CE STM32WB55RE STM32WB55VE be easily used to interact with the memory
of the STM32WB, including secure
256 K / 128 K STM32WB55CC STM32WB55RC STM32WB55VC Pin count programming of the RF stacks.
48-pin UQFN 68-pin VQFN 100-pin WLCSP 129-pin UFBGA
(0.5 mm pitch) (0.4 mm pitch) (0.4 mm pitch) (0.5 mm pitch)

STM32WBx0 VALUE LINE

Extending our portfolio, the STM32WB50 Value Line focuses
Legend: STM32WBx5 line STM32WBx0 Value line pin-to-pin compatible with STM32WBx5
on the essentials and offers a feature-optimized solution
to help developers meet the design requirements of cost-
sensitive industrial and consumer IoT applications.
Companion chip
STMicroelectronics’ integrated matching RF components are tailored for STM32WB packages : The STM32WB55 Nucleo pack is a useful tool to quickly get
MLPF-WB55-0xE3, QFN: x-0, WLCSP100 : x =2. you started with the STM32WB50 microcontrollers.

© STMicroelectronics - March 2020 - Printed in United Kingdom - All rights reserved

The STMicroelectronics corporate logo is a registered trademark of the STMicroelectronics group of companies
All other names are the property of their respective owners

Order code: FLSTM32WB0320 For more information on ST products and solutions, visit www.st.com