FICHA TECNICA - 23 - PARLANTE - Compressed

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Professional Series

CSS-1S/T Compact Two-Way


100V/70V/8-Ohm
Loudspeaker

Key Features:
cc 10 Watt Multi-Tap Transformer for
100V or 70V Distributed Speaker
Lines
cc 8 Ohm Direct Setting
cc Included Wall-Mounting Bracket
Professional Drivers and Network
Applications:
CSS-1S/T is a versatile, compact
two-way loudspeaker designed for use on
100V or 70V distributed speaker lines,
or in 8 ohm direct mode. The 135 mm
(51⁄4 inch) low frequency loudspeaker and
19 mm (3⁄4 inch) polycarbonate dome
tweeter reproduce full-range sound quality
for foreground or background music and
are voiced for maximum speech clarity and
intelligibility.
The rugged enclosure is fitted with an Specifications:
included, easy-to-install ball-type wall- System:
mount bracket that can pivot to aim the Frequency Range (-10 dB): 85 Hz – 18 kHz
speaker in a variety of directions, or the Frequency Response (+/- 3 dB): 120 Hz – 16 kHz
speaker can be aimed straight out from the Power Capacity1: 60 Watts
wall. The flat bottom surface of the cabinet Sensitivity2: 86 dB SPL, 1W (2.83V) at 1m (3.3 ft)
Maximum SPL3: 106 dB at 8 Ohm Direct setting; 96 dB at 10W setting
allows the speaker to be set on a surface
such as a shelf. Nominal Coverage2: 120oH x 120oV
A multi-tap, multi-voltage Directivity Factor (Q)2: 6.2
transformer provides taps of 10 and Directivity Index (DI): 7.9 dB
Nominal Impedance: 8 ohms (in 8Ω DIRECT mode, selectable on back
5 Watts when driven from a 100V
panel)
distributed speaker line and 10, 5 and 2.5
Transformer Taps: 10 W, 5 W (& 2.5W @ 70V)
Watts when driven from a 70V distributed
Crossover Frequency: 4.3 kHz
speaker line. Tap selection is accomplished Transducers:
via a switch that is accessed from the back
LF Driver: 135 mm (5.25 in) low frequency driver
panel. The speaker has a power handling
HF Driver: 19 mm (0.75 in) polycarbonate dome tweeter
of 60 Watts continuous average pink noise
Input Connectors: Spring-loaded terminals
(100 hrs continuously) when set in its 8
Enclosure:
Ohm Direct setting.
Enclosure Material: Polypropylene Structural Foam
Color: Black
Dimensions: 229 mm x 159 mm x 143 mm (9.0 in x 6.3 in x 5.6 in)
Net Weight (each): 2.0 kg (4.5 lb)
Shipping Weight (pair): 4.8 kg (10.5 lb)
Included Accessories: Wall-mounting bracket assembly
1
IEC Standard, full bandwidth pink noise with 6 dB crest factor, 100 hr duration.
2
Average 1 kHz to 10 kHz
3
Calculated based on power handling and sensitivity, exclusive of power compression at high levels.

JBL continually engages in research related to product improvement. Some materials, production methods and design
refinements are introduced into existing products without notice as a routine expression of that philosophy. For this reason,
any current JBL product may differ in some respect from its published description, but will always equal or exceed the
original design specifications unless otherwise stated.
CSS-1S/T Compact Two-Way 100V/70V/8-Ohm Loudspeaker

Frequency Response and Impedance: Beamwidth:


360

-6 dB Beamwidth (degrees)
100

Horizontal
Vertical
10
20 100 1000 10000 20000
Frequency (Hz)

Horizonal Off-Axis Frequency Response: Mounting Bracket:


10
0 deg
10 deg
0
Attenuation (dB)

20 deg
30 deg
-10 40 deg
50 deg
-20 60 deg
70 deg
-30 80 deg
20 100 1000 10000 20000
Frequency (Hz)

Dimensions:
32
(1.3)

71 57
(2.8) (2.3)

229
(9.0)
52
(2.1)

NOTE: Tighten molded nut using the supplied bar and hand-force
CSS-1S/T
only. Over tightening can damage or break the bracket.
PROFESSIONAL

IMPORTANT: Do NOT re-position/re-aim the speaker when


the molded nut is tightened. Doing so could damage or break the
159
(6.3) bracket assembly.

229
(9.0)

JBL Professional
143 61 8500 Balboa Boulevard, P.O. Box 2200
(5.6) (2.4)
Northridge, California 91329 U.S.A. SS CSS-1ST
Dimensions in mm (inches) © Copyright 2019 JBL Professional SZ
03/19
www.jblpro.com

You might also like