Name____________________________________________________Grade & Section:__________Date_________

Direction: Write your answer on the blank provided.

________ 1. Which is used to measure the voltage, resistance and current of a circuit?
_________2. Which tool is used for removing insulation of medium sized wires ranging from gauge #10 to gauge #16?
_________ 3 . Which pliers are the do-it-all pliers? They cut, twist wires together, and grip wires for pulling.
_________ 4. Which is referred to as the rate at which electrons flow past a point in a complete electrical circuit?
_________ 5. Which material that offers very little resistance where electrons can move easily? Ex: silver, copper, gold.
_________ 6. Which materials that present high resistance and restrict the flow of electrons? Examples: Rubber and plastic.
_________ 7. Which is a needle-shaped rod that moves over the scale of a meter?
_________ 8. What instrument is used to measure the amount of electrical current intensity in a circuit?
_________ 9. Which refers to a pocket- sized tool used to test the line wire or circuit if there is a current in it?
_________ 10.Which is referred to as a series of marking used for reading the value of a quantity?
_________ 11.What measuring tool is used to measure the length of an object in centimeter and inches?
_________ 12. Which is used to measure the diameter of wires /conductors in circular mils?
_________ 13.Which unit of measurement is used to express resistance?
_________ 14. Which is an octagonal shaped electrical material where the connections or joints of wires are being done?
_________ 15. . What is the value of current if the voltage is 220 and resistance is 10 ohms?
_________ 16. Which formula will you apply if you want to compute the voltage in a circuit?
_________ 17. It has cross tip resembling a positive (+) sign. It is used to drive screws with cross slot heads. Which is described
in the sentences?
_________ 18. Which is a circuit protective device that automatically blows and cuts the current when an overload or short
circuit happens?
_________ 19. Which is a unit of measurement for electric current?
_________ 20. Which form is used to request for tools or equipment needed for a particular job?
_________ 21. Which is a written instruction to perform a work according to specified requirements, written specified time frame
and cost estimate?
_________ 22. What document is generated by a user department or storeroom-personnel to notify the purchasing
department items, their quantity and the timeframe?

Name____________________________________________________Grade & Section:__________Date_________

Direction: Write your answer on the blank provided.

________ 1. Which is used to measure the voltage, resistance and current of a circuit?
_________2. Which tool is used for removing insulation of medium sized wires ranging from gauge #10 to gauge #16?
_________ 3 . Which pliers are the do-it-all pliers? They cut, twist wires together, and grip wires for pulling.
_________ 4. Which is referred to as the rate at which electrons flow past a point in a complete electrical circuit?
_________ 5. Which material that offers very little resistance where electrons can move easily? Ex: silver, copper, gold.
_________ 6. Which materials that present high resistance and restrict the flow of electrons? Examples: Rubber and
plastic.
_________ 7. Which is a needle-shaped rod that moves over the scale of a meter?
_________ 8. What instrument is used to measure the amount of electrical current intensity in a circuit?
_________ 9. Which refers to a pocket- sized tool used to test the line wire or circuit if there is a current in it?
_________ 10.Which is referred to as a series of marking used for reading the value of a quantity?
_________ 11.What measuring tool is used to measure the length of an object in centimeter and inches?
_________ 12. Which is used to measure the diameter of wires /conductors in circular mils?
_________ 13.Which unit of measurement is used to express resistance?
_________ 14. Which is an octagonal shaped electrical material where the connections or joints of wires are being
done?
_________ 15. . What is the value of current if the voltage is 220 and resistance is 10 ohms?
_________ 16. Which formula will you apply if you want to compute the voltage in a circuit?
_________ 17. It has cross tip resembling a positive (+) sign. It is used to drive screws with cross slot heads. Which is
described in the sentences?
_________ 18. Which is a circuit protective device that automatically blows and cuts the current when an overload or
short
circuit happens?
_________ 19. Which is a unit of measurement for electric current?
_________ 20. Which form is used to request for tools or equipment needed for a particular job?
_________ 21. Which is a written instruction to perform a work according to specified requirements, written specified
time frame and cost estimate?
_________ 22. What document is generated by a user department or storeroom-personnel to notify the purchasing
department items, their quantity and the timeframe?
1. Illustrate the sign that indicates that a person should observe extra awareness?________________________
2.Ilustrate the symbol that shows any activity which is not allowed as stated by the symbol?_________________
3. Illustrate symbol specifies hazardous situation which,
if not avoided, will result to a serious injury or even death._____________________________
4. What is the electrical symbol of fuse?____________________________
5. What is the electrical symbol of a battery?___________________________
6. Draw the electrical symbol of switch
7. Which formula will you apply if you want to compute the resistance in a circuit?
A. R = V/I B. R = I x V C. R = P x I D. R = I/V
8. What ideas or facts show about chemical hazards?
A. These hazards come from falling debris. C. These hazards come from cleaning products.
B. These hazards come from bacteria . D. These hazards come from accidents.
9. Which is a chance or probability that a person will experience an adverse health effect once to hazard?______________
10. What does PPE stand for?__________________
11. Which is a hazard that comes from heavy workloads and stress? _________________________
12. General cleanliness in the work place /work area is important method of ______.
13.Which is an example of conductors?
14. A small drilling machine with a chuck capacity of ¼‖ to 3/8‖. It is used in making holes on metal
sheets and concrete walls. Which is being described in the sentences?
15. How do we use multi tester?___________________
A. By putting a cable on the conductor. C. By connecting a wire from end to end .
B. By using it as a cleaning tool in the workplace . D. By setting it in a right direction according to
current, voltage and resistance
16 . What ideas are relevant to biological hazards?_______________
A. Acids and fumes B. Electrical materials C. Bacteria and viruses D. Heavy workloads
17. Why do we need to familiarize the different hazards in our surrounding ?
A. To lessen the awareness on the effects of various hazards.
B. To minimize the damage of property, injuries and loss of life.
C. To prevent economic and social problems.
D. To develop our skills in dealing with other people.
18. Lack of personal cleanliness can affect your familyʼs health.
A. This is true based on the method of controlling hazard. C. This is true according to the survey.
B. This is not true based on the method of hazard. D. This is not true according to some writers.
19. What do you think are the causes of ergonomic hazard?
A. Heavy workloads and stress C. Working for long period in an awkward position
B. Conflict with the employer D. Poorly stored medical wastes
20. Which method will you apply when general cleanliness is used in the work place?
A. Administrative control B. Risk assessment C. Hazard control D. Engineering control
21. What is the relationship of stranded wire and solid wire?
A. Both of them are used in protecting circuits.
B. Both of them are used in fixing appliances.
C. Both of them are used in wiring installation.
D. Both of them are used in diagramming.
22. Why is a project plan necessary before undertaking any project?
A. Because it serves as a guide in accomplishing an activity.
B. Because it is part of the processing method.
C. Because it leads you to understand the procedure.
D. Because it helps you determine the atmosphere of the workplace.
23. What is the best thing that you can do to make sure that the tool you need is functional when you need it?
A. Make a good routine of maintenance for your tools. C. Unlimited use of tools and materials
B. Make a checklist on the different tools. D. Arrange the tools regularly.
24. How would you prove that electrical materials are important?
A. Through electrical materials houses and appliances are properly secured.
B. Through electrical materials we can save energy.
C. Through electrical materials we can gain additional income.
D. Through electrical materials we can do whatever we want.
25. Why is it necessary to take extra care of the electrical measuring tools and instruments?
A. Because they are expensive. C. Because they are sensitive.
B. Because they are functional. D. Because they are attractive
26. What would you recommend to support the Philippine Clean Air Act of 1999?
A. Participate in various programs related to environmental protection.
B. Focus primarily on the causes and effects of global warming.
C. Encourage the youth to be involved in sports.
D. Provide information about current issues.
27. How would you test a voltage in a circuit ?
A. By using a Voltmeter C. By using Ammeter
B. By using a test light D. By using Ohmmeter
28. Is Ammeter reliable in measuring current within a circuit? Why?
A. Yes, because it is a tool intended to measure current.
B. Yes, because it is designed to test the voltage.
C. No, because it is used to detect resistance.
D. No, because it is effective in determining the size of wire.
 Grade – 7 Electrical Technology First Quarter Examination
Table of Specification

Understanding
Remembering

Evaluating
Analyzing
Applying

Creating

Total
COMPETENCIES

1-3,
Electrical materials and 7,9,11- 5-6 43,44 14
tools 14,
17-18

Different types of forms 20-22 3

16,29,
Ohm’s Law and 4,19 8,10,29 47,49- 15 11
measurement 50

Signs, Symbols and 23-28 6

Abbreviations

Maintenance of tools and

equipment 37,45 36, 38 46 5

Occupational health and

safety procedures 31 32 30, 33- 39 – 11
35,42, 41,48

14 14 7 8 7 50
TOTAL
 EIM - 7
UNIFIED FIRST QUARTER EXAMINATION
ANSWER KEY

1. D
2. C
3. C
4. C
5. C
6. C
7. C
8. C
9. A
10. C
11. D
12. C
13. A
14. A
15. A
16. C
17. D
18. D
19. B
20. D
21. C
22. A
23. A
24. C
25. B
26. D
27. D
28. D
29. A
30. C
31. B
32. C
33. C
34. C
35. B
36. C
37. D
38. C
39. A
40. A
41. C
42. C
43. C
44. A
45. A
46. A
47. A
48. A
49. A
50. A

Volt-Ohm Micrometer . Ohmmeter Multi tester

Long nose pliers Screw driver Wire stripper Push pull rule
A. Long nose B. Wire stripper C. Combination pliers D. Screw drivers