Industrial Diesel Generator Set - 50 HZ: KOHLER Premium Quality

Download as pdf or txt
Download as pdf or txt
You are on page 1of 7

Industrial Diesel Generator Set – B1250

50 Hz

RATINGS 400 V - 50 Hz
Standby kVA 1250
kWe 1000
Prime kVA 1136
kWe 909

Benefits & features GENERAL SPECIFICATIONS


Engine brand BAUDOUIN
KOHLER premium quality
Alternator commercial brand KOHLER
 KOHLER provides one source responsibility for the
generating set and accessories Voltage (V) 400/230
 The generator set, its components and a wide range of Standard Control Panel APM403
options have been fully developed, prototype tested, Consumption @ 100% load ESP (L/h) 258
factory built, and production tested Consumption @ 100% load PRP (L/h) 233
 The generator sets are designed in accordance to Emission level Fuel consumption optimization
ISO8528 Type of Cooling Mechanical driven fan
 Approved for use with HVO (Hydrotreated Vegetable Oil) Performance class G2
according to EN15940
KOHLER premium performances
GENERATOR SETS RATINGS
Engines
 High reliability enhanced through a simple design for Standby Rating Prime Rating
optimal functional performances Voltage PH Hz kWe kVA Amps kWe kVA
 High performances turbochargers providing high engine 415/240 3 50 912 1140 1586 829 1036
B1250 400/230 50 1000 1250 1804 909 1136
performances under all loads 3
380/220 3 50 1000 1250 1899 909 1136
 Easy operation and maintenance: accessories requiring
daily maintenance are conveniently located on the same DIMENSIONS COMPACT VERSION
side of the engine Length (mm) 4765
Alternator Width (mm) 2250
 Provide industry leading motor starting capability
Height (mm) 2465
 Excitation system to permit sustained overcurrent >
Tank capacity (L) 500
300% In, during 10 sec
 Built with a class H insulation and IP23 Dry weight (kg) 8880
Cooling DIMENSIONS SOUNDPROOFED VERSION NA
 A compact and complete solution using a mechanical
Type soundproofing NOT AVAILABLE
driven fan radiator
Length (mm) 6060
 High temperature and altitude product capacity
available Width (mm) 2440
Control Panel Height (mm) 2896
 The KOHLER wide controller range provides the Tank capacity (L) 500
reliability and performances you expect from your
equipment. You can program, manage and diagnose it Dry weight (kg) 14670
easily and in an efficient way Acoustic pressure level @1m in dB(A) 50Hz
91
(75% PRP)
KOHLER worldwide support Acoustic pressure level @7m in dB(A) 50Hz
82
 A standard two-year or 1000-hours limited warranty for (75% PRP)
standby applications.
 A standard one-year or 2500 hours limited warranty for
prime power applications.
 A worldwide product support

Reference Conditions: 25°C Air Inlet Temperature, 40°C Fuel Inlet Temperature, 100 kPa Barometric Pressure; 10.7 g/kg of dry air Humidity. Intake Restriction
set to maximum allowable limit for clean filter; Exhaust Back pressure set to maximum allowable limit.
Data was taken from a single engine test according to the test methods, fuel specification and reference conditions stated above and is subjected to
instrumentation and engine-to-engine variability. Test conducted with alternate test methods, instrumentation, fuel or reference conditions can yield
different results. Data and specifications subject to change without notice.
Industrial Diesel Generator Set – B1250
50 Hz
Engine

General Lubrication System


Engine brand BAUDOUIN Oil system capacity including filters (l) 160
Engine ref. 12M33G1250_V2_5 * Min. oil pressure (bar) 2
Air inlet system Turbo Max. oil pressure (bar) 7
Fuel Diesel Fuel/HVO Oil sump capacity (l) 155
Fuel consumption Oil consumption 100% ESP 50Hz (l/h) 0,72
Emission level
optimization
Cylinder configuration V Air Intake system

Number of cylinders 12 Max. intake restriction (mm H2O) 663

Displacement (l) 39,23 Combustion air flow (l/s) 1275

Bore (mm) * Stroke (mm) 150 * 185 Exhaust system

Compression ratio 15 : 1 PRP ESP

Speed 50Hz (RPM) 1500 Exhaust gas temperature (°C) 550 550

Maximum stand-by power at rated RPM (kW) 1108 Exhaust gas flow (L/s) 3137 3533

Charge Air coolant Air/Air Max. exhaust back pressure (mm H2O) 765

Injection Type Direct Cooling system

Governor type Electronic Radiator & Engine capacity (l) 240

Air cleaner type, models Dry Fan power 50Hz (kW) 55

Fuel system Fan air flow w/o restriction (m3/s) 27,50

Maximum fuel pump flow (l/h) 1070 Available restriction on air flow (mm H2O) 20

Fuel Inlet Minimum recommended size (mm) 14 Type of coolant Gencool


Fuel Outlet Minimum recommended size (mm) 14 Coolant capacity HT, engine only (l) 240
Max head on fuel return line (m fuel) 5,90 Max coolant temperature, Shutdown (°C) 103
Maximum allowed inlet fuel temperature (°C) 70 Thermostat begin of opening HT (°C) 77
Thermostat end of opening HT (°C) 87
Consumption with cooling system
Specific consumption @ ESP Max Power
199,10
(g/kW.h)
Specific consumption @ PRP Max Power
197
(g/kW.h)
Specific consumption @ 75% of PRP Power
194,60
(g/kW.h)
Specific consumption @ 50% of PRP Power
199,30
(g/kW.h)

* Engine reference may be partially modified depending on genset


application, options selected by the customer and lead time required.
** Fuel consumption is up to 4% higher when using HVO than Diesel Fuel

Reference Conditions: 25°C Air Inlet Temperature, 40°C Fuel Inlet Temperature, 100 kPa Barometric Pressure; 10.7 g/kg of dry air Humidity. Intake Restriction
set to maximum allowable limit for clean filter; Exhaust Back pressure set to maximum allowable limit.
Data was taken from a single engine test according to the test methods, fuel specification and reference conditions stated above and is subjected to
instrumentation and engine-to-engine variability. Test conducted with alternate test methods, instrumentation, fuel or reference conditions can yield
different results. Data and specifications subject to change without notice.
Industrial Diesel Generator Set – B1250
50 Hz
Alternator Specifications Alternator Standard Features
Alternator commercial brand KOHLER - All models are brushless, rotating-field alternators
Kohler Alternator description KH04070T
- NEMA MG1, IEEE, and ANSI standards compliance for
Number of pole 4
temperature rise and motor starting
Number of bearing Single Bearing
Technology Brushless
- The AVR voltage regulator provides superior short
circuit capability
Indication of protection IP23
Insulation class H - Self-ventilated and dip proof construction
Number of wires 12 - Sustained short-circuit current of up to 300% of the
AVR Regulation Yes rated current for up to 10 seconds
Coupling Direct - Superior voltage waveform
Capacity for maintaining short circuit
Yes
at 3 ln for 10 s Note: See Alternator Data Sheets for alternator application data
Application data and ratings, efficiency curves, voltage dip with motor starting
Overspeed (rpm) 2250
curves, and short circuit decrement curves.

Power factor (Cos Phi) 0,80


Voltage regulation at established
0,50
rating (+/- %)
Wave form : NEMA=TIF <40
Wave form : CEI=FHT <2
Total Harmonic Distortion in no-load
2,1
DHT (%)
Total Harmonic Distortion, on linear
1,5
load DHT (%)
Recovery time (Delta U = 20%
200
transcient) (ms)
Performance datas
Continuous Nominal Rating 40°C
1150
(kVA)
Unbalanced load acceptance ratio
8
(%)
Peak motor starting (kVA) based on x% voltage dip power factor at 0.3

Reference Conditions: 25°C Air Inlet Temperature, 40°C Fuel Inlet Temperature, 100 kPa Barometric Pressure; 10.7 g/kg of dry air Humidity. Intake Restriction
set to maximum allowable limit for clean filter; Exhaust Back pressure set to maximum allowable limit.
Data was taken from a single engine test according to the test methods, fuel specification and reference conditions stated above and is subjected to
instrumentation and engine-to-engine variability. Test conducted with alternate test methods, instrumentation, fuel or reference conditions can yield
different results. Data and specifications subject to change without notice.
Industrial Diesel Generator Set – B1250
50 Hz

Dimensions compact version with baseframe fuel tank

Length (mm) * Width (mm) * Height (mm) 4765 * 2250 * 2465


Dry weight (kg) 8880
Tank capacity (L) 500

Container dimensions ISO20 soundproofed version

Length (mm) * Width (mm) * Height (mm) 6060 * 2440 * 2896


Dry weight (kg) 14670
Tank capacity (L) 500
Acoustic pressure level @1m in dB(A) 50Hz (75% PRP) 91
Sound power level guaranteed (Lwa) 50Hz (75% PRP) 112
Acoustic pressure level @7m in dB(A) 50Hz (75% PRP) 82
* dimensions and weight without options

Reference Conditions: 25°C Air Inlet Temperature, 40°C Fuel Inlet Temperature, 100 kPa Barometric Pressure; 10.7 g/kg of dry air Humidity. Intake Restriction
set to maximum allowable limit for clean filter; Exhaust Back pressure set to maximum allowable limit.
Data was taken from a single engine test according to the test methods, fuel specification and reference conditions stated above and is subjected to
instrumentation and engine-to-engine variability. Test conducted with alternate test methods, instrumentation, fuel or reference conditions can yield
different results. Data and specifications subject to change without notice.
Industrial Diesel Generator Set – B1250
50 Hz

BASIC GENERATING SET AND POWER PLANT CONTROL


The APM403 is a versatile control unit which allows operation in manual or
APM403 automatic mode
- Measurements : voltage and current
- kW/kWh/kVA power meters
- Standard specifications: Voltmeter, Frequency meter.
- Optional : Battery ammeter.
- J1939 CAN ECU engine control
- Alarms and faults: Oil pressure, Coolant temperature, Overspeed, Start-
up failure, alternator min/max, Emergency stop button.
- Engine parameters: Fuel level, hour counter, battery voltage.
- Optional (standard at 24V): Oil pressure, water temperature.
- Event log/ Management of the last 300 genset events.
- Mains and genset protection
- Clock management
- USB connections, USB Host and PC,
- Communications : RS485 INTERFACE
- ModBUS protocol /SNMP
- Optional : Ethernet, GPRS, remote control, 3G, 4G,
- Websupervisor, SMS, E-mails

Reference Conditions: 25°C Air Inlet Temperature, 40°C Fuel Inlet Temperature, 100 kPa Barometric Pressure; 10.7 g/kg of dry air Humidity. Intake Restriction
set to maximum allowable limit for clean filter; Exhaust Back pressure set to maximum allowable limit.
Data was taken from a single engine test according to the test methods, fuel specification and reference conditions stated above and is subjected to
instrumentation and engine-to-engine variability. Test conducted with alternate test methods, instrumentation, fuel or reference conditions can yield
different results. Data and specifications subject to change without notice.
Industrial Diesel Generator Set – B1250
50 Hz
STANDARD DELIVERY
All our gensets are fitted with:

- Industrial water-cooled DIESEL engine


- Electric starter & charge alternator
- Standard air filter
- Electric circuit breaker, adapted to the short-circuit current of the generating set
- Single bearing alternator IP 23 T° rise/ insulation to class H/H
- Welded steel base frame with 85% vibration attenuation mounts
- frame height optimized to allow it to be moved safely by forklift
- enclosure made of new high-quality European steel with enhanced corrosion resistance
- enclosures and base frames tested and analyzed by the French Corrosion Institut
- 100% of tanks tested for permeability
- Personal protection ensured by protective grilles on hot and rotating parts
- Separate 9 dB(A) silencer
- Fuel tank welded inside the genset frame
- Retention bund included for gensets up to 250 kVA ESP
- Charged DC starting battery with electrolyte
- Emergency stop button on the outside
- Flexible fuel lines & lub oil drain cock
- Exhaust outlet with flexible and flanges
- User’s manual (1 copy)
- Packing under plastic film
- Delivered with oil and antifreeze liquid

CODES AND STANDARDS


Engine-generators set is designed and manufactured in facilities certified to standards ISO9001:2015 & ISO14001:2015. The generator sets and
its components are prototype-tested, factory built and production tested and are in compliance with the relevant standards:

- Machinery Directive 2006/42/EC of May 17th 2006


- EMC Directive2014/30/UE
- Safety objectives set out in the Low Voltage Directive 2014/35/UE
- EN ISO 8528-13, EN 60034-1, EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 55011, EN 1679-1 et EN 60204-1

Reference Conditions: 25°C Air Inlet Temperature, 40°C Fuel Inlet Temperature, 100 kPa Barometric Pressure; 10.7 g/kg of dry air Humidity. Intake Restriction
set to maximum allowable limit for clean filter; Exhaust Back pressure set to maximum allowable limit.
Data was taken from a single engine test according to the test methods, fuel specification and reference conditions stated above and is subjected to
instrumentation and engine-to-engine variability. Test conducted with alternate test methods, instrumentation, fuel or reference conditions can yield
different results. Data and specifications subject to change without notice.
Industrial Diesel Generator Set – B1250
50 Hz
TERMS OF USE
According to the standard, the nominal power assigned by the genset is given for 25°C Air Intlet Temperature, of a barometric pressure of 100
kPA (100 m A.S.L), and 30% relative humidity. For particular conditions in your installation, refer to the derating table.

WARRANTY INFORMATIONS
Standard Warranty Period:

- for Products in "back-up" service


o 30 months from the date the Product leaves the plant
o 24 months from the Product’s commissioning date
o 1,000 running hours
The warranty expires when one of the above conditions is met.

- for Products in “prime” or "continuous" service (continuous supply of electricity, either in the absence of any normal electricity grid
or to complement the grid),
o 18 months from the date the Product leaves the plant
o 12 months from the Product’s commissioning date
o 2,500 running hours
The warranty expires when one of the above conditions is met.

For more details regarding conditions of application and scope of the warranty please refer to our General “terms & conditions of sales”.

Reference Conditions: 25°C Air Inlet Temperature, 40°C Fuel Inlet Temperature, 100 kPa Barometric Pressure; 10.7 g/kg of dry air Humidity. Intake Restriction
set to maximum allowable limit for clean filter; Exhaust Back pressure set to maximum allowable limit.
Data was taken from a single engine test according to the test methods, fuel specification and reference conditions stated above and is subjected to
instrumentation and engine-to-engine variability. Test conducted with alternate test methods, instrumentation, fuel or reference conditions can yield
different results. Data and specifications subject to change without notice.

You might also like