Scribd Logo
Upload

Welcome to Scribd!

  • 21 views

    Esm 5 Dy

    Uploaded by

    Bam Architecture
    The document describes a terminal block signal conditioner model M5DY. It provides current and voltage signal conditioning and isolation between input and output signals. It has options for fast response, coating, adjustment, and terminal screw material. It specifies electrical and performance characteristics.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Esm 5 Dy

    Uploaded by

    Bam Architecture
    21 views4 pages
    The document describes a terminal block signal conditioner model M5DY. It provides current and voltage signal conditioning and isolation between input and output signals. It has options for fast response, coating, adjustment, and terminal screw material. It specifies electrical and performance characteristics.

    Original Title

    esm5dy

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes a terminal block signal conditioner model M5DY. It provides current and voltage signal conditioning and isolation between input and output signals. It has options for fast response, coating, adjustment, and terminal screw material. It specifies electrical and performance characteristics.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    21 views4 pages

    Esm 5 Dy

    Uploaded by

    Bam Architecture
    The document describes a terminal block signal conditioner model M5DY. It provides current and voltage signal conditioning and isolation between input and output signals. It has options for fast response, coating, adjustment, and terminal screw material. It specifies electrical and performance characteristics.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    MODEL: M5DY

    Super-mini Terminal Block Signal Conditioners M5-UNIT (CE or UKCA not available)

    CURRENT LOOP SUPPLY [2] POWER INPUT


    Functions & Features AC Power
    • Powering a 4 – 20 mA DC current loop M: 85 – 264 V AC (Operational voltage range 85 – 264 V,
    • Applicable to smart transmitters 47 – 66 Hz)
    • Isolation between the input and output (CE or UKCA not available)
    • Fast response type available DC Power
    • High-density mounting R: 24 V DC
    • Power LED (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

    25 [.98]
    [3] OPTIONS (multiple selections)
    Response Time (0 – 90 %)
    blank: Standard (≤ 0.5 sec.)
    97
    [3.82] /K: Fast Response (Approx. 25 msec.)
    Other Options
    blank: none
    41 [1.61] /Q: Option other than the above (specify the specification)
    mm [inch]

    SPECIFICATIONS OF OPTION: Q (multiple selections)


    MODEL: M5DY-[1]-[2][3] COATING (For the detail, refer to our web site.)
    /C01: Silicone coating
    ORDERING INFORMATION /C02: Polyurethane coating
    • Code number: M5DY-[1]-[2][3] /C03: Rubber coating
    Specify a code from below for each of [1] through [3]. ADJUSTMENT
    (e.g. M5DY-A-R/K/Q) /V01: Multi-turn fine adjustment
    • Special output range (For codes Z, 0 & 01) TERMINAL SCREW MATERIAL
    • Specify the specification for option code /Q /S01: Stainless steel
    (e.g. /C01/V01/S01)
    GENERAL SPECIFICATIONS
    INPUT Construction: Terminal block
    Current Connection: M3.5 screw terminals (torque 0.8 N·m)
    4 – 20 mA DC (Input resistance approx. 250 Ω) Screw terminal: Nickel-plated steel (standard) or stainless
    steel
    Housing material: Flame-resistant resin (black)
    [1] OUTPUT Isolation: Input to output to power
    Current Overrange output: Approx. -10 to +110 % at 1 – 5 V
    A: 4 – 20 mA DC (Load resistance 550 Ω max.) Zero adjustment: -2 to +2 % (front)
    D: 0 – 20 mA DC (Load resistance 550 Ω max.) Span adjustment: 98 to 102 % (front)
    Z: Specify current (See OUTPUT SPECIFICATIONS) Power indicator LED: Green LED turns on when the power is
    Voltage supplied.
    1: 0 – 10 mV DC (Load resistance 100 kΩ min.)
    (CE or UKCA not available)
    2: 0 – 100 mV DC (Load resistance 100 kΩ min.) SUPPLY OUTPUT
    (CE or UKCA not available) (across the terminals 3 – 4)
    3: 0 – 1 V DC (Load resistance 100 Ω min.) Output voltage: 24 – 28 V DC with no load
    4: 0 – 10 V DC (Load resistance 1000 Ω min.) 18 V DC min. at 20 mA
    5: 0 – 5 V DC (Load resistance 500 Ω min.) Current rating: ≤ 22 mA DC
    6: 1 – 5 V DC (Load resistance 500 Ω min.) • Shortcircuit Protection
    0: Specify voltage (See OUTPUT SPECIFICATIONS) Current limited: 30 mA max.
    01: Specify voltage (See OUTPUT SPECIFICATIONS) Protected time duration: No limit

    M5DY SPECIFICATIONS ES-2476 Rev.13 Page 1/4

    MG CO., LTD.
    www.mgco.jp
    MODEL: M5DY
    INPUT SPECIFICATIONS
    ■ DC Current: Input resistor incorporated

    OUTPUT SPECIFICATIONS
    ■ DC Current: 0 – 20 mA DC
    Minimum span: 1 mA
    Offset: Max. 1.5 times span
    Load resistance: Output drive 11 V max.
    ■ DC Voltage
    • Output code 0 (CE)
    Voltage range: 0 – 10 V DC
    Minimum span: 1 V
    Offset: Max. 1.5 times span
    Load resistance: Output drive 10 mA max.; at ≥1 V
    • Output code 01 (Not CE)
    Voltage range: 0 – 1 V DC
    Minimum span: 10 mV
    Offset: Max. 1.5 times span
    Load resistance: Min. 100 kΩ

    INSTALLATION
    Power Consumption
    •AC: Approx. 3 VA
    •DC: Approx. 2 W
    Operating temperature: -5 to +55°C (23 to 131°F)
    Operating humidity: 0 to 90 %RH (non-condensing)
    Mounting: DIN rail
    Weight: 80 g (2.8 oz)

    PERFORMANCE in percentage of span


    Accuracy: ±0.1 %
    Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
    Line voltage effect: ±0.1 % over voltage range
    Insulation resistance: ≥ 100 MΩ with 500 V DC
    Dielectric strength (input to output to power to ground)
    DC powered: 2000 V AC @1 minute
    AC powered: 1500 V AC @1 minute

    STANDARDS & APPROVALS


    EU conformity:
    EMC Directive
    EMI EN 61000-6-4
    EMS EN 61000-6-2
    RoHS Directive
    UK conformity (UKCA):
    The UK legislations and designated standards are
    equivalent to the applicable EU directives.
    (Refer to our website for more information about the
    legislations and designated standards.)

    M5DY SPECIFICATIONS ES-2476 Rev.13 Page 2/4

    MG CO., LTD.
    www.mgco.jp
    MODEL: M5DY
    FRONT VIEW

    1 2
    3 4 Power LED

    Span Adj.
    Zero Adj.

    5 6
    7 8

    EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm [inch]


    7.3 [.29]
    8–M3.5 SCREW

    1 2
    DIN RAIL
    3 4 35mm wide
    94 [3.70]

    5 6
    7 8
    3 [.12]

    25 [.98] 41 [1.61] (3.3 [.13])

    • When mounting, no extra space is needed between units.

    M5DY SPECIFICATIONS ES-2476 Rev.13 Page 3/4

    MG CO., LTD.
    www.mgco.jp
    MODEL: M5DY
    SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
    2-WIRE
    TRANSMITTER
    Shortcircuit 24V DC
    + + 3
    Protection Supply
    – – 4 Z S Isolation
    Low Drift Output
    + 1 5 +
    Amplifier Driver
    MONITOR V OUTPUT
    (1 – 5V DC) – 2 6 –
    250Ω
    POWER LED

    7 U(+)
    POWER
    8 V(–)

    ■ When Used as DC Supply ■ When Used as Isolator

    + + 3 + 3
    2-WIRE
    XMTR –
    – 4 – 4

    + 1 + 1
    INPUT
    – 2 – 2
    250Ω 250Ω

    Specifications are subject to change without notice.

    M5DY SPECIFICATIONS ES-2476 Rev.13 Page 4/4

    MG CO., LTD.
    www.mgco.jp

    You might also like