Selectedttt

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 6

If you experience a problem that you can’t fix, you can:

Introduction to computer Basics

INTRODUCTION TO COMPUTERS

Any programming language is implemented on a computer. Right form its inception, to the
present day, all computer system (irrespective of their shape & size) perform the following 5
basic operations. It converts the raw input data into information, which is useful to the users.

1. Inputting: It is the process of entering data & instructions to the computer system.
2. Storing: The data & instructions are stored for either initial or additional processing, as
& when required.
3. Processing: It requires performing arithmetic or logical operation on the saved data to
convert it into useful information.
4. Outputting: It is the process of producing the output data to the end user.
5. Controlling: The above operations have to be directed in a particular sequence to be
completed.

Input Unit: We need to first enter the data & instruction in the computer system, before any
computation begins. This task is accomplished by the input devices. (Eg: keyboard, mouse,
scanner, digital camera etc). This device is responsible for linking the system with the external
environment. The data accepted is in a human readable form. The input device converts it into a
computer readable form.
If you experience a problem that you can’t fix, you can:

 Storage Unit: The data & instruction that are entered have to be stored in the computer.
Similarly, the end results & the intermediate results also have to be stored somewhere before
being passed to the output unit. The storage unit provides solution to all these issues. This
storage unit is designed to save the initial data, the intermediate result & the final result. This
storage unit has 2 units: Primary storage& Secondary storage.

Primary Storage: The primary storage, also called as the main memory, holds the data when the
computer is currently on. As soon as the system is switched off or restarted, the information held
in primary storage disappears (i.e. it is volatile in nature). Moreover, the primary storage
normally has a limited storage capacity, because it is very expensive as it is made up of
semiconductor devices.

Secondary Storage: The secondary storage, also called as the auxiliary storage, handles the
storage limitation & the volatile nature of the primary memory. It can retain information even
when the system is off. It is basically used for holding the program instructions & data on which
the computer is not working on currently, but needs to process them later.

 Central Processing Unit: Together the Control Unit & the Arithmetic Logic Unit are called
as the Central Processing Unit (CPU). The CPU is the brain of the computer. Like in humans, the
major decisions are taken by the brain itself & other body parts function as directed by the brain.
Similarly, in a computer system, all the major calculations & comparisons are made inside the
CPU. The CPU is responsible for activating & controlling the operation of other units of the
computer system.

Arithmetic Logic Unit: The actual execution of the instructions (arithmetic or logical perations)
takes place over here. The data & instructions stored in the primary storage are transferred as &
when required. No processing is done in the primary storage. Intermediate results that are
generated in ALU are temporarily transferred back to the primary storage, until needed later.
Hence, data may move from the primary storage to ALU & back again to storage, many times,
before the processing is done.

Control Unit: This unit controls the operations of all parts of the computer but does not carry out
any actual data processing. It is responsible for the transfer of data and instructions among other
If you experience a problem that you can’t fix, you can:

units of the computer. It manages and coordinates all the units of the system. It also
communicates with Input/ Output devices for transfer of data or results from the storage units.

Output Unit: The job of an output unit is just the opposite of an input unit. It accepts the results
produced by the computer in coded form. It converts these coded results to human readable form.
Finally, it displays the converted results to the outside world with the help of output devices
( Eg :monitors, printers, projectors etc..).

So when we talk about a computer, we actually mean 2 things:

Hardware- This hardware is responsible for all the physical work of the computer.
Software- This software commands the hardware what to do & how to do it.

Together, the hardware & software form the computer system.

This software is further classified as system software & application software.

System Software- System software are a set of programs, responsible for running the computer,
controlling various operations of computer systems and management of computer resources.
They act as an interface between the hardware of the computer & the application software. E.g.:
Operating System Application Software- Application software is a set of programs designed to
solve a particular problem for users. It allows the end user to do something besides simply
running the hardware. E.g.: Web Browser, Gaming Software, etc.

INTRODUCTION TO PROGRAMMING

A language that is acceptable to a computer system is called a computer language or


programming language and the process of creating a sequence of instructions in such a language
is called programming or coding. A program is a set of instructions, written to perform a specific
task by the computer. A set of large program is called software. To develop software, one must
have knowledge of a programming language.

Before moving on to any programming language, it is important to know about the various types

of languages used by the computer. Let us first know what the basic requirements of the

programmers were & what difficulties they faced while programming in that language.
If you experience a problem that you can’t fix, you can:

COMPUTER LANGUAGES

Languages are a means of communication. Normally people interact with each other through a

language. On the same pattern, communication with computers is carried out through a language.

This language is understood both by the user and the machine. Just as every language like

English, Hindi has its own grammatical rules; every computer language is also bounded by rules

known as syntax of that language. The user is bound by that syntax while communicating with
the computer system. Computer languages are broadly classified as:

 Low Level Language: The term low level highlights the fact that it is closer to a language
which the machine understands.

The low level languages are classified as:

o Machine Language: This is the language (in the form of 0’s and 1’s, called binary numbers)
understood directly by the computer. It is machine dependent. It is difficult to learn and even
more difficult to write programs.

o Assembly Language: This is the language where the machine codes comprising of 0’sand 1’s
are substituted by symbolic codes (called mnemonics) to improve their understanding. It is the
first step to improve programming structure. Assembly language programming is simpler and
less time consuming than machine level programming, it is easier to locate and correct errors in
assembly language than in machine language programs. It is also machine dependent.
programmers must have knowledge of the machine on which the program will run.

 High Level Language: Low level language requires extensive knowledge of the hardware

since it is machine dependent. To overcome this limitation, high level language has been evolved
which uses normal English, which is easy to understand to solve any problem. High level
languages are computer independent and programming becomes quite easy and simple. Various
high level languages are given below:

BASIC (Beginners All Purpose Symbolic Instruction Code): It is widely used, easy to
learn general purpose language. Mainly used in microcomputers in earlier days.
If you experience a problem that you can’t fix, you can:

COBOL (Common Business Oriented language): A standardized language used for


commercial applications.
FORTRAN (Formula Translation): Developed for solving mathematical and scientific
problems. One of the most popular languages among scientific community.
C: Structured Programming Language used for all purpose such as scientific application,
commercial application, developing games etc.
C++: Popular object oriented programming language, used for general purpose.

PROGRAMMING LANGUAGE TRANSLATORS

As you know that high level language is machine independent and assembly language though it
is machine dependent yet mnemonics that are being used to represent instructions are not directly
understandable by the machine. Hence to make the machine understand the instructions provided
by both the languages, programming language instructors are used. They transform the
instruction prepared by programmers into a form which can be interpreted & executed by the
computer. Flowing are the various tools to achieve this purpose:

 Compiler: The software that reads a program written in high level language and translates

it into an equivalent program in machine language is called as compiler. The program

written by the programmer in high level language is called source program and the

program generated by the compiler after translation is called as object program.

 Interpreter: it also executes instructions written in a high level language. Both complier &

interpreter have the same goal i.e. to convert high level language into binary instructions,

but their method of execution is different. The complier converts the entire source code

into machine level program, while the interpreter takes 1 statement, translates it, executes

it & then again takes the next statement.

 Assembler: The software that reads a program written in assembly language and translates

it into an equivalent program in machine language is called as assembler.

 Linker: A linker or link editor is a computer program that takes one or more object files
If you experience a problem that you can’t fix, you can:

generated by a compiler and combines them into a single executable file, library file, or

another object file.

Data communication

Computer Data base systems

Cloud Computing

Computer software

You might also like