A

Report
On
Submitted in partial fulfillment of the
Requirements for the award of the degree

Of

ROBTICS
Bachelor of Technology-CSE
SESSION: 2023-24
SEMINAR(BCS6505)

Submitted by

NAME: RISHAV SINGH

ROLL NO: 202110101110084
Group:63
Submitted To

Mr. Neelesh Mishra

FACULTY OF COMPUTER SCIENCE AND ENGINEERING

SHRI RAMSWAPROOP MEMORIAL UNIVERSITY, LUCKNOW-DEWA ROAD UP, INDIA

 ABSTRACT

Robotics is a branch of Artificial Intelligence (AI), it is mainly composed of electrical

engineering, mechanical engineering and computer science engineering for construction,
designing and application of robots. Over the course of human history, the emergence of
certain new technologies has globally transformed life as we know it. Disruptive technologies
like fire, the printing press, oil, and television have dramatically changed both the planet we
live on and mankind itself, most often in extraordinary and unpredictable ways.

In pre-history these disruptions took place over hundreds of years. With the time compression
induced by our rapidly advancing technology, they can now take place in less than a
generation. We are currently at the edge of one such event.

In ten years, robotic systems will fly our planes, grow our food, explore space, discover
lifesaving drugs, fight our wars, sweep our homes and deliver our babies. In the process, this
robotics driven disruptive event will create a new 200-billion-dollar global industry and
change life as you now know it, forever. Just as my children cannot imagine a world without
electricity, your children will never know a world without robots. Come take a bold look at
the future and the opportunities for Mechanical Engineers that wait there.

This paper introduces robotics by explaining what it is, providing a brief history and laws of
robotics. We have even discussed various types of robots and their use.
 TABLE OF CONTENTS

1. Introduction
1.1 History Of Robotics
1.2 Meaning Of Robotics
1.3 Definition of a Robot
1.4 Laws of Robotics

2. Types of Robots

2.1 Mobile Robots

2.1.1 Rolling Robots

2.1.2 Walking Robots

2.2 Stationary Robots

2.3 Autonomous Robots

2.4 Remote-Control Robots

3. Branch Of Robotics
3.1 Biology

3.2 Electronics

3.3 Aesthetics

3.4 Mechanics

4. Components Of Robots
5. Robotics Application

5.1 Rob Surgery

5.2 Robots in danger zones

5.3 AIBO

5.4 Humanoid robots

6.1 Advantages
6.2 Limitations
7.1 Problems With Robots
7.2 The Impact of Robotics on Society
8. Future Scope

9. Conclusion
10. References

CHAPTER 1

INTRODUCTION

With growing developments in the field of mechatronics and mathematic modeling,

robotics has come a long way. From an iron piece that could move only a few inches, there
are now machines capable of jumping from high-rise buildings, detecting landmines,
performing operations and troubleshooting.

Robotics is an interdisciplinary field that integrates computer science and engineering.

Robotics involves design, construction, operation, and use of robots. The goal of robotics is
to design machines that can help and assist humans. Robotics integrates fields of
mechanical engineering, electrical engineering, information engineering, mechatronics,
electronics, bioengineering, computer engineering, control engineering, software
engineering, mathematics, among others.

The very mention of a ‘robot’ reminds one of the Terminators/ Cyborgs with their
menacing steel bodies and reddened eyes, which are out to destroy the world.

From the early Stark Trek days to the current cybernetics’ agents in Matrix and X-Men,
these agents have time and reminded us of the holocaust, and with the emergence of new
found technologies the fears are just confounding.

1.1 History of Robotics:

The term ‘robot’ got prominence way back in the 1950s when Karl Capek in his play
Rossum’s Universal Robots denoted the birth of a superior race that had intelligence similar
to that of humans.

Later on, Issac Asimov introduced his laws of robots and finally Eric Ellenberger, who is
 considered as the father of robotics, introduced real time robots to the world.

Fully autonomous robots only appeared in the second half of the 20th century. The first
digitally operated and programmable robot, the Animate, was installed in 1961 to lift hot
pieces of metal from a die casting machine and stack them.

Commercial and industrial robots are widespread today and used to perform jobs more
cheaply, more accurately and more reliably, than humans. They are also employed in some
jobs which are too dirty, dangerous, or dull to be suitable for humans.

Karl Capek Isaac Asimov

1.2 Meaning of Robotics:

Robotics means the study and application of robot technology.

Robotics is a branch of engineering that involves conception, design, manufacture, and

operation of machines assigned for specific high precision and repetitive tasks.

1.3 Definition of a ‘Robot’:

"A reprogrammable, multifunctional manipulator designed to move material, parts, tools, or

specialized devices through various programmed motions for the performance of a variety of
tasks"
1.4 3 Laws of Robotics:

Popular science fiction writer Isaac Asimov created the Three Laws of
Robotics:
1. A robot must not injure a human being or, through inaction,
allow a human being to come to harm.
2. A robot must always obey orders given to it by a human being,
except where it would conflict with the first law.
3. A robot must protect its own existence, except where it would
conflict with the first or second law.

CHAPTER 2

TYPES OF ROBOTS

There are many types of robots; they are used in many different environments and for many
different uses. Some of them are:

 Mobile Robots
 Rolling Robots
 Walking Robots
 Stationary Robots
 Autonomous Robots
 Remote-control Robots

Ask a number of people to describe a robot and most of them will answer they look like a
human. Interestingly a robot that looks like a human is probably the most difficult robot to
make. Is usually a waste of time and not the most sensible thing to model a robot after a
human being. A robot needs to be above all functional and designed with qualities that suits
its primary tasks. It depends on the task at hand whether the robot is big, small, able to
move or nailed to the ground. Each and every task means different qualities, form and
function, a robot needs to be designed with the task in mind.

2.1 Mobile Robots – Mobile robots are able to move, usually they perform task such as
search areas. A prime example is the Mars Explorer, specifically designed to roam the
mars surface.
Mobile robots are a great help to such collapsed building for survivor’s Mobile robots are
used for task where people cannot go. Either because it is too dangerous of because
people cannot reach the area that needs to be searched.

Mobile robots can be divided in two categories:

2.1.1 Rolling Robots: -

Rolling robots have wheels to move around. These are the type of robots that can
quickly and easily search move around. However, they are only useful in flat areas,
rocky terrains give them a hard time. Flat terrains are their territory.
2.1.2 Walking Robots – Robots on legs are usually brought in when the terrain is rocky and
difficult to enter with wheels. Robots have a hard time shifting balance and keep them from
tumbling. That’s why most robots with have at least 4 of them, usually they have 6 legs or
more. Even when they lift one or more legs, they still keep their balance. Development of
legged robots is often modelled after insects or crawfish

2.2 Stationary Robots: -

Robots are not only used to explore areas or imitate a human being. Most robots perform
repeating tasks without ever moving an inch. Most robots are ‘working’ in industry settings.
Especially dull and repeating tasks are suitable for robots.

A robot never grows tired, it will perform its duty day and night without ever complaining. In
case the tasks at hand are done, the robots will be reprogrammed to perform other tasks.

2.3 Autonomous Robots: -

Autonomous robots are self-supporting or in other words self-contained. In a way they rely
on their own ‘brains’.

Autonomous robots run a program that give them the opportunity to decide on the action
to perform depending on their surroundings. At times these robots even learn new
behaviour. They start out with a short routine and adapt this routine to be more successful
at the task they perform. The most successful routine will be repeated as such their
behaviour is shaped.
Autonomous robots can learn to walk or avoid obstacles they find in their way. Think about a
six-legged robot, at first the legs move ad random, after a little while the robot adjust its
program and performs a pattern which enables it to move in a direction.

Complicated tasks are still best performed by human beings with real brainpower. A
person can guide a robot by remote control. A person can perform difficult and usually
dangerous tasks without being at the spot where the tasks are performed. To detonate a
bomb, it is safer to send the robot to the danger area.

CHAPTER 3

BRANCH OF ROBOTICS

There are basically 4 branches which robotics use.

3.1 Biology: -

Robots are often modeled after nature. A lot of BEAM robots look remarkably like insects.
Insects are easy to build in mechanical form. Not just the mechanics are in inspiration also
the limited behavior can easily be programmed in a limited amount of memory and
processing power.

3.2 Electronics: -

Like all robots they also contain electronics. Without electronic circuits the engines
cannot be controlled. Lots of Beam Robots also use solar power as their main source of
energy.

3.3 Aesthetics: -

A BEAM Robot should look nice and attractive. BEAM robots have no printed circuits
with some parts but an appealing and original appearance.
3.4 Mechanics: -

In contrast with expensive big robots BEAM robots are cheap, simple, built out of
recycled material and running on solar energy.

CHAPTER 4

COMPONENTS OF ROBOTS

• Structure
• Power source
• Actuation
• Sensing
• Manipulation
• Locomotion

4.1 Structure: -

The structure of a robot is usually mostly mechanical and can be called a kinematic chain.
The chain is formed of links (its bones), actuators (its muscles), and joints which can allow
one or more degrees of freedom.

4.2 Power Source: -

 • Suitable power supply is needed to run the motors and associated circuitry
• Typical power requirement ranges from 3V to 24V DC
• 220V AC supply must be modified to suit the needs of our machine
• Batteries can also be used to run robots
• Robots are driven by different motors: -
o DC Motors
o Stepper Motors
o Servo Motors

4.3 Actuation: -

Actuators are the "muscles" of a robot, the parts which convert stored
energy into movement.
The most popular actuators are electric motors.
4.4 Manipulation: -
• Robots which must work in the real world require some way to manipulate
objects; pick up, modify, destroy, or otherwise have an effect. Thus the 'hands' of
a robot are often referred to as end effectors, while the arm is referred to as a
manipulator.
• Some manipulators are:
o Mechanical Grippers
o Vacuum Grippers
o General purpose effectors

4.5 Locomotion: -

• It is concerned with the motion of the robot.

• Robot contains different types of drives: -
o Differential drive
 o Car type
o Skid steer drive
o Synchronous drive
o Pivot drive
o Articulated drive

CHAPTER-5

• ROBOTICS APPLICATION
•
• 5.1 Rob Surgery

• Robots are increasingly being used during certain types of microsurgeries. This
lets surgeons perform delicate procedures that would otherwise be too fine for
human hands.

• The surgeon can control a surgery from a terminal in a room or at times several
miles away from the patient while robots go on with their job. Assisted with
tactile/feedback sensors, the surgeon can ‘feel’ the tissues underneath the robot
instruments.

5.2 Robots is danger zones

Robots form an important part of landmines and bomb detection squads in many
countries.

Besides such land combining operations, the robots go deep down the earth’s crust
where temperatures are unbearable and also search for buried treasures in the deepest
 of oceans and sometimes work in nuclear reactors. The very purpose of deploying
robots is to shield humans from hazards.

However, in most of the robots used, the robot’s operator controls it from a safe
distance and guides the fully armed robot to the danger zone.

5.3 AIBO- the robot pup

When one thinks about robots, AIBO is the name that comes across everyone’s mind.
AIBO can express emotions of happiness, sadness, anger, surprise, etc. and definitively
makes a wonderful companion.

This robot pup responds to your voice commands with flashing lights and sounds. The
newer versions promise more interaction and far better responses with the sensors
corresponding to the senses of humans and animals.

5.4 Humanoid robots

When it comes to human resemblance, one can just marvel at Honda’s ASIMO and
Sony’s SDR-3X and now the more advanced SDR-4X. These humanoid robots walk on
two feet with amazing grace, replicating the walking movements of humans.
Sony’s SDR-4X has advanced features such as the ability to remember faces and recognize
emotions from facial features in addition to improved voice and speech recognition and
technology.
 CHAPTER 6

6.1 ADVANTAGES:

 You can send them to very dangerous places

 You can make them do your job for you
 They are more accurate than humans E.g. no shaking when in a very important
surgery, puts every screw in fabricating a car etc.
 Can do jobs 24/7
 Can guard without being tired just keep doing the same thing 24/7
 No need of nutrients
 You can program them to make them do exactly what you want them to do
 They cannot harm you unless they are programmed to
 can work without doubts E.g. when you think "what do i do now"?
 They can lift very heavy things

6.2 LIMITATIONS:

 You need to get people trained to fix them if anything wrong happens
 Need a very intelligent crew
 They can ruin people’s lives E.g. Take their job away from them
 They are very expensive to make
 You need the right materials to make them, that could be very rare
 If you make a very amazing robot with amazing quality and it brakes, it might
be very hard to fix
 They can be very hard to programmed
 They can reproduce but it could cost money for the materials
 You need highly trained people to make them
 They cannot recharge themselves
 CHAPTER 7

7.1 Problems With Robotics:

Yes, there are problems. As with any machine, robots can even cause disaster. They are
powerful machines that we allow to control certain things. When something goes
wrong, terrible things can happen. Luckily, this is rare because robotic systems are
designed with many safety features that limit the harm they can do.

There's also the problem of evil people using robots for evil purposes. This is true today
with other forms of technology such as weapons, and biological material. Of course,
robots could be used in future wars.

This could be good or bad. If humans perform their aggressive acts by sending
machines out to fight other machines, that would be better than sending humans out to
fight other humans. Teams of robots could be used to defend a country against attacks
while limiting human casualties. Could future wars really just be a video game that
drives robots?

Either way, human nature is the flawed component that's here to stay.

7.2 The Impact Of Robotics On Society:

Since robots are used mainly in manufacturing, we see their impact in the products we
use every day. Usually this results in a cheaper product. Robots are also used in cases
where it can do a better job than a human such as surgery where high precision is a
benefit. And, robots are used in exploration in dangerous places such as in volcanos
which allows us to learn without endangering ourselves.
 CHAPTER 8

FUTURE SCOPE

There is no denying that Robotic technologies are all set to change the way things are done
in the industries in which they are being implemented. Entrepreneurs are voicing a similar
sentiment and are clearly optimistic about the use of Robotics in various industrial
segments. Robotics is mainly capturing industries like manufacturing, pharmaceutical,
FMCG, packaging and inspection. A bit of Robotics would also be seen in the technologies.

The other promising sectors are defence and education. World had come across PC
revolution and mobile revolution in the recent past now it is the time for inevitable robotics.
Considering that the global players, like Google, FESTO and Tesla are investing in Robotics
along with substantial increase in amateur robotic enthusiasts, Open-source tools and
platforms available for robotics, it is assured that significant development in this field will
occur in another 5-10 years.
 CHAPTER 9

CONCLUSION

Today we find most robots working for people in industries, factories,

warehouses, and laboratories. Robots are useful in many ways.

For instance, it boosts economy because businesses need to be efficient to keep up

with the industry competition.

Therefore, having robots helps business owners to be competitive, because robots can do
jobs better and faster than humans can, e.g. robot can build, assemble a car. Yet robots
cannot perform every job; today robots roles include assisting research and industry.

Finally, as the technology improves, there will be new ways to use robots which will
bring new hopes and new potentials.