DOC No : CC/QA-F19

CANNY CONTROL LIST OF RECEIVING GAUGES AND TEMPLATES FOR LMW PARTS
Page No: 1

Validity period : 6 Months once Updated on : 10.04.24

Fixtures/ Template Fixture/Template

S.No Part Name PART Number Photos Details pf process/Parameter/Dimension Calibration Status
No / Receiving gauges Reference

1. 5E1504050-Door handle CD =1634.5mm and handle

length=125mm,width=80mm are controlled.
Rear RH Door Calibration on : 09.04.2024
1 LMW 1 5E1551530 CC-LMW-FIX-01 / 01 2.Spacer height=32mm and Spacer bush CD =1344.5 mm
complete Next Due : 08.10.2024
3.M6 weld nut CD =30mm, Hole dia =8mm.

1. Special CSK spacerCD=1721.5mm and hole reference =101.5mm,

Rear RH Door Hole dia=24mm. Calibration on : 09.04.2024
2 LMW 1 5E1551530 CC-LMW-FIX-01 / 02
complete 2.Door LH side cut out CD=1647.5mm,Cut out Next Due : 08.10.2024
length=74mm,width=18mm.

1. Lock slot Length & width = 20 mm,CD = 1047mm Calibration on : 09.04.2024

3 LMW 1 DOOR LH COMP 5A1056536 CC-LMW-FIX-02
2. Slot pocket width = 25mm, CD = 1175 mm Next Due : 08.10.2024

1. 5E1504050-Door handle CD =1634.5mm and handle

length=125mm,width=80mm are controlled.
Rear LH Door Calibration on : 10.04.2024
4 LMW 1 5E1551550 CC-LMW-FIX-03 / 01 2.Spacer height=32mm and Spacer bush CD =1344.5 mm
complete Next Due : 09.10.2024
3.M6 weld nut CD =30mm, Hole dia =8mm.

1. Special CSK spacerCD=1721.5mm and hole reference =101.5mm,

Rear LH Door Hole dia=24mm. Calibration on : 10.04.2024
5 LMW 1 5E1551550 CC-LMW-FIX-03 / 02
complete 2.Door LH side cut out CD=1647.5mm,Cut out Next Due : 09.10.2024
length=74mm,width=18mm.
 DOC No : CC/QA-F19
CANNY CONTROL LIST OF RECEIVING GAUGES AND TEMPLATES FOR LMW PARTS
Page No: 1

Validity period : 6 Months once Updated on : 10.04.24

Fixtures/ Template Fixture/Template

S.No Part Name PART Number Photos Details pf process/Parameter/Dimension Calibration Status
No / Receiving gauges Reference

1.
1. Stud to Stud CD =handle
5E1504050-Door 40 mm,CDStud to end CDand
=1634.5mm = 144.3 mm
handle
2. Round Cut out Diameter = 220mm
length=125mm,width=80mm are controlled. Calibration on : 10.04.2024
09.04.2024
6 LMW 1 Door LH comp 5A1057672 CC-LMW-FIX-04 3. Rectangle
2.Spacer Cut out Length
height=32mm = 66.2 mm.
and Spacer bushWidth = 100.2
CD =1344.5 mmmm
Next Due : 09.10.2024
08.10.2024
4. Rectangle
3.M6 weld nutcutCD
out to Round
=30mm, Holecutdia
out CD = 501 mm , Round Cut out
=8mm.
to Stud CD = 144.7 mm

Calibration on : 10.04.2024
7 LMW 1 Door RH comp 5A1057690 CC-LMW-FIX-05 Stud to stud CD = 40mm, Stud to End CD = 144.3 mm & 93 mm
Next Due : 09.10.2024

1. Stud to stud CD = 40 mm , Stud to end CD = 121 mm

Calibration on : 10.04.2024
8 LMW 1 Door LH comp 5A1076274 CC-LMW-FIX-06 2. Rectangle Cut out Length = 100.2 mm , Width = 66.2 mm
Next Due : 09.10.2024
3. Rectangle Cut out to Stud CD = 928.8 mm

DOOR FRONT LH 1. Stud to Stud CD = 28.3 mm Calibration on : 10.04.2024

9 LMW 1 5C1870610 CC-LMW-FIX-07
COMPL-SMALL 2. Slot Cutout Width = 25mm and Slot to Slot Pitch = 600 mm Next Due : 09.10.2024

Front Door RH Compl 1. Stud to Stud CD = 28.3 mm Calibration on : 10.04.2024

10 LMW 1 5C1870353 CC-LMW-FIX-08
Small 2. Slot Cutout Width = 25mm and Slot to Slot Pitch = 600 mm Next Due : 09.10.2024
 DOC No : CC/QA-F19
CANNY CONTROL LIST OF RECEIVING GAUGES AND TEMPLATES FOR LMW PARTS
Page No: 1

Validity period : 6 Months once Updated on : 10.04.24

Fixtures/ Template Fixture/Template

S.No Part Name PART Number Photos Details pf process/Parameter/Dimension Calibration Status
No / Receiving gauges Reference

1.
1. 5E1504050-Door handle
Slot to slot CD = 1600 mmCD =1634.5mm
, Slot width 25 and
mmhandle
length=125mm,width=80mm
2. Clamp with weld nut to weld are controlled.
nut pitch = 20 mm, Calibration on : 12.04.2024
MIDDLE DOOR LH 09.04.2024
11 LMW 1 5C1870650 CC-LMW-FIX-09 2.Spacer height=32mm
COMPL 3. Side Hole diameter = and
8mmSpacer
, Holebush CD =1344.5
to hole mm mm
pitch = 777.1 Next Due : 11.10.2024
08.10.2024
3.M6
4. weld
Mesh nut CDand
position =30mm, Hole dia =8mm.
orientation

1. Stud to Stud CD = 40 mm, Stud to End CD = 93 mm , 121 mm

Calibration on : 12.04.2024
12 LMW 1 DOOR LH 5A1076294 CC-LMW-FIX-10 2. Round cut out diameter = 80 mm , Round cut out to end CD =
Next Due : 11.10.2024
146.5 mm

1. Mesh cutting orientaion for both sides.

DOOR LH BACK 2. Slot Width = 25 mm , slot to slot CD = 938 mm Calibration on : 12.04.2024
13 LMW 1 5A1057851 CC-LMW-FIX-11
COMPLETE 3. strip M5 to M5 CD = 5*200 mm , Hole diameter = 2*8mm,Hole to Next Due : 11.10.2024
hole CD = 775 mm

1. Clamp Weld nut CD = 20mm , Clamp to end CD = 137.5 mm

2. Hole Diameter = 15 mm, Hole to end CD =221 mm
3. Lock slot Width & Length = 20 mm , Lock Slot CD = 58.5 mm
REAR DOOR RH Calibration on : 12.04.2024
14 LMW 1 5C1870471 CC-LMW-FIX-12 4. Rectangle cut out Length = 100.2 mm , Width = 66.2 mm, Slot to
COMPLETE Next Due : 11.10.2024
end referance = 48.4 mm
5. "L" Slot cutout width = 25mm, slot to slot CD = 800 mm
6. Mesh cut out position and patterns

1. Mesh cutting orientaion for both sides.

DOOR RH BACK 2. Slot Width = 25 mm , slot to slot CD = 938 mm Calibration on : 12.04.2024
15 LMW 1 5A1057856 CC-LMW-FIX-13
COMPLETE 3. strip M5 to M5 CD = 5*200 mm , Hole diameter = 2*8mm,Hole to Next Due : 11.10.2024
hole CD = 775 mm
 DOC No : CC/QA-F19
CANNY CONTROL LIST OF RECEIVING GAUGES AND TEMPLATES FOR LMW PARTS
Page No: 1

Validity period : 6 Months once Updated on : 10.04.24

Fixtures/ Template Fixture/Template

S.No Part Name PART Number Photos Details pf process/Parameter/Dimension Calibration Status
No / Receiving gauges Reference

1. Lock slot width = 20 mm , Lock to rectangle cut out CD = 90 mm,

1. 5E1504050-Door
Lock to bottom CD =handle
995.65CD
mm =1634.5mm and handle
length=125mm,width=80mm aremm,
2.Rectangle cut out width = 66.2 controlled.
Length 100.2 mm, Rectangle Calibration on : 12.04.2024
REAR DOOR LH 09.04.2024
16 LMW 1 5C1890131 CC-LMW-FIX-14 2.Spacer
COMPL cut out toheight=32mm
left side doorand
CD =Spacer bush CD =1344.5 mm
52.9 mm Next Due : 11.10.2024
08.10.2024
3.M6
3. weld
Clamp nut
nut toCDnut=30mm,
CD = 20Hole
mm,dia =8mm.to round cut out CD =
Clampe
4. Mesh cut out position

1. Lock Holder tap to tap CD = 21 mm & 98 mm , Lock holder to

Bottom of Door CD = 1001 mm
2. Rectangle cut out width =66.2 mm, Length = 100.2 mm , Cut out to
REAR DOOR LH Calibration on : 12.04.2024
17 LMW 1 5C1870673 CC-LMW-FIX-15 Bottom of Door CD = 1100 mm, Lock holder slot width = 22 mm
COMPLETE Next Due : 11.10.2024
3. Rod Holder clamp to clamp CD = 1747 mm
4. slot width = 25 mm , slot to slot CD = 1600 mm
5. Mesh cut out position and rear cross stiffner position

1. Bear clamp width = 60 mm , Bear clamp to Bear clamp CD = 586

mm
Calibration on : 13.04.2024
18 LMW 2 TOP DOOR COMP 5B1071057 CC-LMW-FIX-16 2. Lock hole Squre = 20.2 mm , lock hole to lock hole CD = 590 mm
Next Due : 12.10.2024
3. Adjustable angle with width = 30 mm , Adjustable angle to bottom
of door CD = 40 mm

1. Bear clamp width = 60 mm , Bear clamp to Bear clamp CD = 726

mm
Calibration on : 13.04.2024
19 LMW 2 BOTTOM DOOR COMP 5B1071055 CC-LMW-FIX-17 2. Lock hole Squre = 20.2 mm , lock hole to lock hole CD = 666 mm
Next Due : 12.10.2024
3. Adjustable angle with width = 30 mm , Adjustable angle to bottom
of door CD = 40 mm

1. Lock Guide support to lock guide suport CD = 444.5 mm &517 mm

, Lock Guild support nut CD = 28 mm
DOOR FRONT LH Calibration on : 13.04.2024
20 LMW 1 5A1058414 CC-LMW-FIX-18 2. Lock Holder tap to tap CD = 21 mm & 98 mm
COMPL Next Due : 12.10.2024
3.strip M5 to M5 CD = 5*200 mm , Hole diameter = 2*8mm,Hole to
hole CD = 775 mm
 DOC No : CC/QA-F19
CANNY CONTROL LIST OF RECEIVING GAUGES AND TEMPLATES FOR LMW PARTS
Page No: 1

Validity period : 6 Months once Updated on : 10.04.24

Fixtures/ Template Fixture/Template

S.No Part Name PART Number Photos Details pf process/Parameter/Dimension Calibration Status
No / Receiving gauges Reference

1.
1. Lock Guide support
5E1504050-Door to lock
handle CDguide suport CD
=1634.5mm and= handle
444.5 mm &517 mm
,length=125mm,width=80mm
Lock Guild support nut CD = 28
aremm
controlled.
21
DOOR FRONT RH
2. Lock Holder tap to tapand
CDSpacer
= 21 mm & 98 Calibration on : 13.04.2024
09.04.2024
LMW 1 5A1058416 CC-LMW-FIX-19 2.Spacer height=32mm bush CDmm
=1344.5 mm Next Due : 08.10.2024
12.10.2024
COMPL
3.strip M5 to M5 CD = 5*200 mm , Hole
3.M6 weld nut CD =30mm, Hole dia =8mm. diameter = 2*8mm,Hole to
hole CD = 775 mm

1. Bear clamp to Bear clamp CD = 1356 mm , Bear clamp width = 60

mm
Calibration on : 13.04.2024
22 LMW 2 TOP DOOR RH COMP 5B1073210 CC-LMW-FIX-20 2. M6 stud to stud CD = 2*425 mm , 421 mm , 190 mm
Next Due : 12.10.2024
3. Lock holder Thread to thread CD = 21 mm , Lock holder to bottom
CD = 313 mm

1. Rod holder clamp to roc holder clamp CD = 1352 mm

2. Rectangle cut out width = 66.2mm,Length = 100.2 mm and Cut out
to bottom CD = 1102.4 mm
DOOR FRONT RH Calibration on : 13.04.2024
23 LMW 1 5C1870476 CC-LMW-FIX-21 3. Stud to stud CD = 28.3 mm
COMPLETE LARGE Next Due : 12.10.2024
4. Lock holder clamp M5 to M5 CD = 98mm , 21 mm and Lock holder
clamp to bottom = 1102.4mm
5. Mesh cutout position

1. Rod holder clamp to roc holder clamp CD = 1352 mm

2. Rectangle cut out width = 66.2mm,Length = 100.2 mm and Cut out
DOOR FRONT LH to bottom CD = 1102.4 mm
Calibration on : 13.04.2024
24 LMW 1 COMPLETE (LARGE) - 5C1870630 CC-LMW-FIX-22 3. Stud to stud CD = 28.3 mm
Next Due : 12.10.2024
WO PC 4. Lock holder clamp M5 to M5 CD = 98mm , 21 mm and Lock holder
clamp to bottom = 1102.4mm
5. Mesh cutout position

1. Hinge nut to hinge nut CD = 3*41 mm , Hinge to hinge CD = 2*582

WASTE BOX DOOR mm
FRAME RH COMPLE - 2. Length = 1503 mm , width = 326 mm Calibration on : 13.04.2024
25 LMW 2 SF5G0253090 CC-LMW-FIX-23
326MM W/O 3. Top M6 weld nut to weld nut CD = 209 mm Next Due : 12.10.2024
POWDER COATI 4. slot to slot CD = 3*250mm and 288mm
5. Hole to hole CD = 272 mm Slot to slot CD = 278 mm
 DOC No : CC/QA-F19
CANNY CONTROL LIST OF RECEIVING GAUGES AND TEMPLATES FOR LMW PARTS
Page No: 1

Validity period : 6 Months once Updated on : 10.04.24

Fixtures/ Template Fixture/Template

S.No Part Name PART Number Photos Details pf process/Parameter/Dimension Calibration Status
No / Receiving gauges Reference

1.Hinge nut to hinge nut CD = 4*41 mm , Hinge to hinge CD = 582

mm , 407 mm , 251 handle
1. 5E1504050-Door mm CD =1634.5mm and handle
WASTE BOX DOOR
2. Length = 1503 mm , width =are
length=125mm,width=80mm 326controlled.
mm
FRAME LH COMPLE - Calibration on : 13.04.2024
09.04.2024
26 LMW 2 SF5G0253091 CC-LMW-FIX-24 3. Top M6height=32mm
2.Spacer weld nut to weld nut CD bush
and Spacer = 209CD
mm=1344.5 mm
326MM W/O Next Due : 12.10.2024
08.10.2024
4. slotweld
3.M6 to slot
nutCD
CD= =30mm,
3*250mm anddia
Hole 288mm
=8mm.
POWDER COATI
5. Hole to hole CD = 272 mm Slot to slot CD = 278 mm
6. Side support slot to slot CD = 192 mm

1. Lock Square = 20 mm , Lock to Lock CD = 600 mm

2. Side Weld nut CD = 2*36mm , 628 mm
3. M8 stud to stud CD = 2*57.5mm,2*36.3mm,66mm
Calibration on : 13.04.2024
27 LMW 1 TOP DOOR COMPLETE 5C2650210 CC-LMW-FIX-25 4. Hole to hole Reference = 92.5mm, 49.7mm, 43.3mm
Next Due : 12.10.2024
5. Stiffener position and Gap = 16.5 mm
6. Gas Spring hold holes position and diameter = 7*ø9 mm, hole to
hole CD = 15 mm

INSPECTED BY APPROVED BY: