Validity Unknown

STEEL AUTHORITY OF INOIA LIM ITEO Page No :A-1 of 1
BHILAI STEEL PLANT IS: 2062

RESEARCH & CONTROL LAB (MECHANICAL TESTING LAB)
TEST CERTIFICATE FOR HOT ROLLED MEOIUM ANO HIGH TENSILE STRUCTURAL
STEEL
CM/L-0057534
MTL-11/QR-2
Sold-to-Party: T.C.No : RCUMTUPLM/80750599

BM BSO FARIDABAD T.C. Date : 02.05.2023
GOVIND BHAWAN NEELAM CHOWK NIT SALES ORDER NO : 1100457285
FARIDABAD 121001 DA No : 80750599
Ship-to-Party:
WHM FARIDABAD,Faridabad. Wagon No/ Trailer No : SR21 061810124
Process of Manufacture of Steel : Basic Oxygen Converter> Continuous Casi> Fully Killed Steel
Specification: IS 2062 E250 BR: 2011 RA 2021
We certify that the material described below fully conforms to IS 2062 : 2011 RA 2021. Chemical composition and Mechanical properties of the product, as
tested in accordance with the scheme of testing and inspection contained in the BIS certification mark Number CM/L 0057534 are as indicated against each
Order No.
(Please refer to IS 2062 : 2011 RA 2021 for details of specification requirements)
TEST RESULTS
SECTION (NOMINAL SIZE) MECHANICAL PROPERTIES

Test
THICK WIDTH LENGTH Plate No Heat No YS
14
322
Heat CHEMICAL COMPOSITION (LADLE ANALYSIS)
No C s p Mn Si Al Cu Cr Ni Mo Nb V Ti B CE
% % % % % % % % % % % % % % %
350367 0.14 0.015 0.024 0.76 0.25 0.021 < 0.02 0.030 < 0.015 < 0.015 < 0.010 < 0.010 < 0.005 < 0.0005 0.27
Total Pieces Page/ Sales Order : 1 / 1 Total Pieces/ TC 20
The Material supplied conforms to the standard rolling and weight tolerances.,
CE calculated by formula: [C + Mn/6 + (Cr+ Mo+ V )/5 + (Ni+ Cu )/15],
Size of impact test specimen:10x1 0x55 mm(above 10mm thickness); 7.5x10x55 mm(upto 10mm thickness),
Note:*• M = Mandrel Dia, T = Plate Thickness, Length is the rolling direction of the plate,
TC as per BSEN 10204 Type 3.1,
Validity unknown
Digitally signed by S SAIJU
Date: 2023.05.02 12:32:36 1ST
Reason: Authorized Signatory RCL,
BSP
Authorised Signatory Authorized Signatory

SAIU CMO/ BSO Research & Control Laboratory, Bhilai Steel Plant
STEEL AUTHORITY OF INOIA LIM ITEO Page No :B-1 of 1
TEST CERTIFICATE FOR HOT ROLLED MEOIUM ANO HIGH TENSILE STRUCTURAL
STEEL
CM/L-0057534
MTL-11/QR-2

FARIDABAD 121001 DA No : 80750599
Ship-to-Party:
WHM FARIDABAD,Faridabad. Wagon No/ Trailer No : SR21 06181O124
Process of Manufacture of Steel : Basic Oxygen Converter> Continuous Casi> Fully Killed Steel
Specification: IS 2062 E250 BR: 2011 RA 2021
We certify that the material described below fully conforms to IS 2062 : 2011 RA 2021. Chemical composition and Mechanical properties of the product, as
tested in accordance with the scheme of testing and inspection contained in the BIS certification mark Number CM/L 0057534 are as indicated against each
Order No.
TEST RESULTS

Test
THICK WIDTH LENGTH Plate No Heat No YS UTS %E %E2 CHARPY V NOTCH () Impact Values (J)
OK 2.0 T
OK 2.0 T
No C s p Mn Si Al Cu Cr Ni Mo Nb V Ti N2 B CE
% % % % % % % % % % % % % ppm % %
358014 0.21 0.019 0.024 1.09 0.26 0.017 < 0.02 0.030 < 0.015 < 0.015 < 0.010 < 0.010 < 0.005 60 < 0.0005 0.40
Ultrasonic Testing Level :ASTM A 578 Level B Satisfactory & level of acceptance as per TDC,
Validity unknown
Date: 2023.05.02 12:32:36 1ST
BSP

STEEL AUTHORITY OF INOIA LIM ITEO Page No :C-1 of 1
TEST CERTIFICATE FOR STEEL PLATES FOR PRESSURE VESSELS FOR

INTERMEDIATE ANO HIGH TEMPERATURE SERVICE INCLUDING BOILERS
CM/L-1488364
MTL-11/QR-2

FARIDABAD 121001 DA No : 80750599
Ship-to-Party:
Process of Manufacture of Steel : Basic Oxygen Converter> Continuous Casi> Fully Killed Steel> Normalising Rolling
Specification : IS 2002 GR 3 : 2009 RA 2018
It is certified that the material described below fully conforms to IS 2002 : 2009 RA 2018. Chemical composition and Mechanical properties of the product
as tested in accordance with the scheme of testing and inspection contained in the BIS certification marks Licence Number CM/L 1488364 are as indicated
against each Order No.
TEST RESULTS
SECTION (NOMINAL SIZE) MECHANICAL PROPERTIES Bend

Test
THICK LENGTH Plate No Heat No YS CHARPY V NOTCH() Impact Values (J)
mm
--
CHEMICAL COMPOSITION (LADLE ANALYSIS)
% % % % % % % % % % % % % ppm % %
349290 0.20 0.019 0.021 1.08 0.18 0.006 < 0.02 0.030 < 0.015 < 0.015 < 0.010 < 0.010 < 0.005 70 < 0.0005 0.39
All the plate surfaces & dimension checked by BSP & each plate bears a stamp thus.
Ultrasonic Testing Level :ASTM A 435 Satisfactory & level of acceptance as per TDC,
Validity unknown
Date: 2023.05.02 12:32:36 1ST
BSP

STEEL AUTHORITY OF INOIA LIM ITEO Page No :D-1 of 1

CM/L-1488364
MTL-11/QR-2

FARIDABAD 121001 DA No : 80750599
Ship-to-Party:
TEST RESULTS
SECTION (NOMINAL SIZE) MECHANICAL PROPERTIES Bend M Dia

Test
285 MPa 460-580 11 12 13 lavg oc
mm mm mm /Pc.No. in21(5.6
Min MPa 5SqrtS0)
17 2550 10161 3001036/1 359097 365 555 29 -- OK 3.0 T
17 2550 10161 3001036/2 359097 365 555 29 -- OK 3.0 T
17 2550 10161 3003230/2 359231 367 510 24 -- OK 3.0 T
17 2550 10161 3004083/1 359234 359 508 24 -- OK 3.0 T
17 2550 10161 3004083/2 359234 359 508 24 -- OK 3.0 T
% % % % % % % % % % % % % % %
359097 0.19 0.025 0.028 1.06 0.23 0.016 < 0.02 0.040 0.030 < 0.015 < 0.010 < 0.010 < 0.005 72 < 0.0005 0.38
359231 0.21 0.023 0.020 1.11 0.22 0.016 < 0.02 0.020 < 0.015 < 0.015 < 0.010 < 0.010 < 0.005 62 < 0.0005 0.40
359234 0.21 0.021 0.022 1.08 0.24 0.014 < 0.02 0.030 < 0.015 < 0.015 < 0.010 < 0.010 < 0.005 64 < 0.0005 0.40
Total Pieces Page/ Sales Order : 5 I 5 Total Pieces/ TC 20
Note:** M = Mandrel Dia, T = Plate Thickness, Length is the rolling direction of the plate,
Validity unknown
Date: 2023.05.02 12:32:36 1ST
BSP

STEEL AUTHORITY OF INOIA LIM ITEO Page No :E-1 of 2

CM/L-1488364
MTL-11/QR-2

FARIDABAD 121001 DA No : 80750599
Ship-to-Party:
TEST RESULTS

Test
285 MPa 460-580 11 12 13 lavg oc
mm mm mm /Pc.No. in21(5.6
Min MPa 5SqrtS0)
17 2550 9700 2964684/2 355087 399 545 28 -- OK 3.0 T
17 2550 9500 2964731/2 355090 345 512 29 -- OK 3.0 T
17 2550 9700 2966356/2 355307 380 526 26 -- OK 3.0 T
17 2550 10161 3003192/2 359177 362 527 26 -- OK 3.0 T
17 2550 10161 3003202/2 359177 380 531 25 -- OK 3.0 T
17 2550 9900 3001891/2 359185 355 521 23 -- OK 3.0 T
17 2550 9900 3003221/2 359231 387 533 25 -- OK 3.0 T
% % % % % % % % % % % % % ppm % %
355087 0.22 0.015 0.027 1.13 0.30 0.013 < 0.02 0.030 < 0.015 < 0.015 < 0.010 < 0.010 < 0.005 60 < 0.0005 0.41
355090 0.20 0.012 0.022 1.08 0.23 0.011 < 0.02 0.030 < 0.015 < 0.015 < 0.010 < 0.010 < 0.005 63 < 0.0005 0.39
355307 0.20 0.015 0.023 1.12 0.23 0.016 < 0.02 < 0.015 < 0.015 < 0.015 < 0.010 < 0.010 < 0.005 64 < 0.0005 0.39
359177 0.21 0.024 0.029 1.10 0.24 0.015 < 0.02 0.030 < 0.015 < 0.015 < 0.010 < 0.010 < 0.005 78 < 0.0005 0.40
359185 0.22 0.022 0.024 1.05 0.23 0.014 < 0.02 0.030 < 0.015 < 0.015 < 0.010 < 0.010 < 0.005 65 < 0.0005 0.40
359231 0.21 0.023 0.020 1.11 0.22 0.016 < 0.02 0.020 < 0.015 < 0.015 < 0.010 < 0.010 < 0.005 62 < 0.0005 0.40
Validity unknown
Date: 2023.05.02 12:32:36 1ST
BSP

STEEL AUTHORITY OF INOIA LIM ITEO Page No :E-2 of 2

CM/L-1488364
MTL-11/QR-2

FARIDABAD 121001 DA No : 80750599
Ship-to-Party:
Validity unknown
Date: 2023.05.02 12:32:36 1ST
BSP

STEEL AUTHORITY OF INOIA LIM ITEO Page No :F-1 of 1
RESEARCH & CONTROL LAB (MECHANICAL TESTING LAB) CM/L-1488364

TEST CERTIFICATE FOR STEEL PLATES FOR PRESSURE VESSELS FOR MTL-11/QR-2
FARIDABAD 121001 DA No : 80750599
Ship-to-Party:
Specification: IS 2002 GR 3 : 2009 RA 2018/ASME SA 515 GR 70:2021
TEST RESULTS

Test
THICK WIDTH LENGTH Plate No Heat No 0
mm mm mm /Pc.No. 29; Pa48 :;80r, ,n: 1 5 5 1 : GL.

Min M Pa 5SqrtS0) 00)
12 2500 11000 2983848/2 349478 401 566 25 19 OK 13.0 T

% % % % % % % % % % % % % ppm % %
349478 0.21 0.017 0.022 1.08 0.27 0.009 < 0.02 0.030 < 0.015 < 0.015 < 0.010 < 0.010 < 0.005 65 < 0.0005 0.40
Total Pieces Page/ Sales Order : 1 / 1 Total Pieces/ TC : 20
Yield strength determined by 0.2% offset method,
Validity unknown
Date: 2023.05.02 12:32:36 1ST
BSP

STEEL AUTHORITY OF INOIA LIM ITEO Page No :G-1 of 1
TEST CERTIFICATE FOR STEEL PLATES FOR PRESSURE VESSELS USED AT

MODERATE ANO LOW TEMPERATURE
CM/L-3016535
MTL-11/QR-2

FARIDABAD 121001 DA No : 80750599
Ship-to-Party:
Process of Manufacture of Steel : Basic Oxygen Converter> Continuous Casi> Fully Killed Steel> Normalising Rolling> Fine Grain Practice
Specification: IS 2041 R260: 2009 RA 2018 / ASMESA 516 GR70: 2021
TEST RESULTS

Test
16 2500 7000 3013266/7 359167 374 550 28 22

16 2500 8300 3015345/6 360197 364 515 26 21
% % % % % % % % % % % % % ppm % %
359167 0.23 0.016 0.016 1.14 0.32 0.024 < 0.02 0.020 < 0.015 < 0.015 < 0.010 < 0.010 < 0.005 65 < 0.0005 0.42
360197 0.19 0.016 0.019 1.15 0.29 0.031 < 0.02 0.030 < 0.015 < 0.015 < 0.010 < 0.010 < 0.005 63 < 0.0005 0.39
Validity unknown
Date: 2023.05.02 12:32:36 1ST
BSP

STEEL AUTHORITY OF INOIA LIM ITEO Page No :H-1 of 1
TEST CERTIFICATE FOR STEEL PLATES FOR PRESSURE VESSELS USED AT

MODERATE ANO LOW TEMPERATURE
CM/L-3016535
MTL-11/QR-2

FARIDABAD 121001 DA No : 80750599
Ship-to-Party:
Process of Manufacture of Steel : Basic Oxygen Converter> Continuous Casi> Fully Killed Steel> Normalising Rolling> Fine Grain Practice
Specification: IS 2041 R260: 2009 RA 2018 / ASMESA 516 GR70: 2021
TEST RESULTS

Test
16 2500 8100 3013258/7 359167 380 546 26 21

16 2500 8000 3018532/2 360524 352 547 26 21
% % % % % % % % % % % % % ppm % %
359167 0.23 0.016 0.016 1.14 0.32 0.024 < 0.02 0.020 < 0.015 < 0.015 < 0.010 < 0.010 < 0.005 65 < 0.0005 0.42
360524 0.23 0.021 0.024 1.10 0.32 0.032 < 0.02 0.030 < 0.015 < 0.015 < 0.010 < 0.010 < 0.005 65 < 0.0005 0.42
Validity unknown
Date: 2023.05.02 12:32:36 1ST
BSP


Validity Unknown

Uploaded by

Copyright:

Available Formats

Validity Unknown

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Validity Unknown

Uploaded by

Copyright:

Available Formats

STEEL AUTHORITY OF INOIA LIM ITEO Page No :A-1 of 1

BHILAI STEEL PLANT IS: 2062

Sold-to-Party: T.C.No : RCUMTUPLM/80750599

SECTION (NOMINAL SIZE) MECHANICAL PROPERTIES

Authorised Signatory Authorized Signatory

Sold-to-Party: T.C.No : RCUMTUPLM/80750599

SECTION (NOMINAL SIZE) MECHANICAL PROPERTIES

Authorised Signatory Authorized Signatory

TEST CERTIFICATE FOR STEEL PLATES FOR PRESSURE VESSELS FOR

Sold-to-Party: T.C.No : RCUMTUPLM/80750599

SECTION (NOMINAL SIZE) MECHANICAL PROPERTIES Bend

Authorised Signatory Authorized Signatory

TEST CERTIFICATE FOR STEEL PLATES FOR PRESSURE VESSELS FOR

Sold-to-Party: T.C.No : RCUMTUPLM/80750599

SECTION (NOMINAL SIZE) MECHANICAL PROPERTIES Bend M Dia

Authorised Signatory Authorized Signatory

TEST CERTIFICATE FOR STEEL PLATES FOR PRESSURE VESSELS FOR

Sold-to-Party: T.C.No : RCUMTUPLM/80750599

SECTION (NOMINAL SIZE) MECHANICAL PROPERTIES Bend M Dia

Authorised Signatory Authorized Signatory

TEST CERTIFICATE FOR STEEL PLATES FOR PRESSURE VESSELS FOR

Sold-to-Party: T.C.No : RCUMTUPLM/80750599

TC as per BSEN 10204 Type 3.1,

Authorised Signatory Authorized Signatory

RESEARCH & CONTROL LAB (MECHANICAL TESTING LAB) CM/L-1488364

SECTION (NOMINAL SIZE) MECHANICAL PROPERTIES Bend M Dia

mm mm mm /Pc.No. 29; Pa48 :;80r, ,n: 1 5 5 1 : GL.

12 2500 11000 2983848/2 349478 401 566 25 19 OK 13.0 T

Authorised Signatory Authorized Signatory

TEST CERTIFICATE FOR STEEL PLATES FOR PRESSURE VESSELS USED AT

Sold-to-Party: T.C.No : RCUMTUPLM/80750599

SECTION (NOMINAL SIZE) MECHANICAL PROPERTIES

16 2500 7000 3013266/7 359167 374 550 28 22

Authorised Signatory Authorized Signatory

TEST CERTIFICATE FOR STEEL PLATES FOR PRESSURE VESSELS USED AT

Sold-to-Party: T.C.No : RCUMTUPLM/80750599

SECTION (NOMINAL SIZE) MECHANICAL PROPERTIES

16 2500 8100 3013258/7 359167 380 546 26 21

Authorised Signatory Authorized Signatory

You might also like