ME KZ RE Ds Albedometers EN 230927

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Albedometers

an OTT HydroMet brand


Applications
Solar Monitoring for PV
Weather Services
Climatology
Agriculture
Research

Create an albedometer with


two pyranometers and a mounting fixture
Two pyranometers and a mounting
Large area for satellite data validation
In PV plants for bifacial modules
All ISO 9060 classes available
Analog or digital output
Easy to assemble

Albedometer
Two similar pyranometers are mounted horizontally, to of the surface changes. The albedometer is mounted low,
measure incoming and reflected irradiances in W/m2. The around 1.5 m, and does not need a lower glare screen.
ratio of the two is the albedo of the surface below.
Select your preferred pyranometers
Large area measurement Choose pyranometers depending upon the ISO 9060
For meteorology, climate research and agriculture, the classification and signal output that you require. SP Lite2
mounting is usually high up to measure albedo over a large and CMP3/SMP3 bolt together back-to-back and have a
area and to validate satellite data. A glare screen prevents screw-in mounting rod.
direct radiation reaching the lower detector when the sun
is low. Double-dome CMP/SMP pyranometers can be fixed to
a CMF1 mounting plate and rod, or the larger CMF4 if
Bifacial PV you need CVF4 heating and ventilation units. For both
Bifacial PV modules generate extra power from light on the configurations a glare screen for the lower pyranometer is
rear side that is primarily reflected from the surface below. available if required.
However, this varies with the type of surface, weather
conditions, angle of the sun and shading effects. These
variables make it is necessary to measure how the albedo
Options

SP Lite2 CMP3/SMP3

Mounting rod Mounting rod


length: 300 mm length: 300 mm
ø 12 mm ø 12 mm
order no: 0338720 order no: 0338720

Double dome CMP/SMP Albedometer Kit Ventilated double dome


with the lower glare screen, CMF1 mounting plate, CMP/SMP Albedometer Kit
and mounting rod with CMF4 mounting plate and mounting rod

CMF1 mounting plate


order no: 0362700
length: 350 mm
ø 16 mm

CMF4 mounting plate


order no: 0362703
Compatible with the CMP6, SMP6, CMP10, SMP10, CMP21, length: 350 mm
ME-KZ-RE-ds-Albedometers-EN-230927

CMP22 and SMP22 pyranometers, CGR4 and SGR4 pyrgeometers ø 20 mm


and CUV5 and SUV5 broadband UV radiometers.

OTT HydroMet GmbH | [email protected] | www.otthydromet.com

an OTT HydroMet brand

You might also like