Manual Alien - 7RZ
Manual Alien - 7RZ
mx
BEAM 7RZ
M A N U A L D E U S U A R I O
Foreword
Thank you for your patronage. We are confident that our excellent products and service can satisfy you.
For your own safety, please read this user manual carefully before installing the device.
14 Function 000-015 Unused range
In order to install , operate, and maintain the lighting safety and correctly. We suggest that the installation
016-255 Effcts macro function
and operation should be done by the verified technician and follow the instruction strictly.
15 Reset 000-127 Unused range
128-255 COMPLETE RESET Every person involved with the installation, operation and maintenance of this device has to:
16 Lamp control 000-025 Unused range Be qualified
026-100 Lamp off Follow carefully the instructions of this manual.
101-255 Lamp on
Maintenance
DMX Channel 20CH - To reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture.
- Intermittently using will extend this item’s service life.
DMX - Please clear the fan , fan net , and optical lens in order to keep good work state.
Channel Function Feature
Value
- Do not use the alcohol or any other organic solvent to wipe the shell.
1~16 Functions the same 16 channel mode
17 Pan/ Tilt Speed 000-255 Pan/Tilt speed Fast-slow
18 Color wheel Speed 000-255 Color wheel speed Fast-slow
Statement
19 Dimmer Speed 000-255 Dimmer speed Fast-slow The product has perfect performance and integrity packing. All users should be strictly complying with the
20 Gobo Speed 000-255 Static gobo change speed Fast-slow warning and operating instructions as stated. Or we aren’t in charge of any result by misusing. Any
damage resulting by misuse is not within the Company’s warranty. Any fault or problem caused by
neglecting the manual is also not in the charge of dealers.
Note: All information is subject to change without prior notice.
Statement
The product has perfect performance and integrity packing. All users should be strictly complying with the
warning and operating instructions as stated. Or we aren’t in charge of any result by misusing. Any
damage resulting by misuse is not within the Company’s warranty. Any fault or problem caused by
neglecting the manual is also not in the charge of dealers.
Note: All information is subject to change without prior notice.
Safety Precaution
- In order to guarantee the product’s life, please don’t put it in the damp places or even the environment
over 60degress.
- Always mount this unit in safe and stable matter.
- Install or dismantle should operate by professional engineer.
- Using lamp, the change rate of power voltage should be within±10%, If the voltage is too high, it will
shorten the light’s life; If it’s not enough, will influence the effect.
- Please restart it 20 minutes later after turning off light, until full-cooling. Frequent switching will reduce
the life span of lamps and bulbs; intermittent using will improve the life of bulbs and lamps.
In order to make sure the product is used well, please read the Manual carefully.
w w w . a l i e n p r o . c o m . m x w w w . a l i e n p r o . c o m . m x
12 1
Channel Detail
DMX Channel 16CH
064-067 Gobo 16
Product Instruction 068-071 Gobo 17
- Lamp: 230W (life:2200 hours Color temperature: 8000K) 072-113 Slow to fast rotation
114-117 Stop
- Channel mode:16/20CH DMX512 Channel
118-159 Slow to fast rotation(Backward)
- Pan scan: 540°(16bit) Electric correction 160-166 Gogo2 shake slow-fast speed
- Tilt scan: 270° (16bit) Electric correction 167-172 Gogo3 shake slow-fast speed
- Amazing dot matrix, four tact switch, 180° turning show 173-179 Gogo4 shake slow-fast speed
- Color wheel: one color wheel, 14 kinds of color chips in one color wheel 180-185 Gogo5 shake slow-fast speed
186-191 Gogo6 shake slow-fast speed
- Gobo: 17 gobos
192-198 Gogo7 shake slow-fast speed
- Effect Wheel: Rotation eight prism, effect move , frost 199-204 Gogo8 shake slow-fast speed
- 0-100% mechanical dimming, mechanical dimming and free dimming available. 205-211 Gogo9 shake slow-fast speed
- Strobe macro control available. 212-217 Gogo10 shake slow-fast speed
- Beam angle 0 - 4° 218-223 Gogo11 shake slow-fast speed
224-230 Gogo12 shake slow-fast speed
- Over heat protection
231-236 Gogo13 shake slow-fast speed
- Power Input: 100-240V, 50/60Hz 237-243 Gogo14 shake slow-fast speed
- Power Dissipation: 380W 244-249 Gogo15 shake slow-fast speed
- IP level : IP20 250-255 Gogo16 shake slow-fast speed
- Magnetic ballast and AC/Dc power supply 5 Prism 000-127 Prism excluded
insertion 128-255 Prism inserted
- Product Size: 400×380×530mm
- Net weight: 19.5KG 000-020 Position
021-041 Position 90°
Cable Connection (DMX) 042-062 Position 180°
063-083 Position 270°
Use a cable conforming to specifications EIA RS-485: 2-pole twisted, shielded, 120Ohm characteristic 6 Prism rotation 084-104 Position 360°
impedance, 22-24 AWG, low capacity. Do not use microphone cable or other cable with characteristics 105-126 Position 450°
differing from those specified. The end connections must be made using XLR type 3 or 5-pin male/female 127 Position 540°
128-190 Fast to slow rotation
connectors. A terminating plug must be inserted into the last projector with a resistance of 120Ohm
191-192 Stop
(minimum 1/4 W) between terminals 2 and 3. 193-255 Slow to fast rotation
7 Function 000-255 unused
IMPORTANT: The wires must not make contact with each other or with the metal casing of the connec-
8 Frost 000-127 Frost excluded
tors. The casing itself must be connected to the shield braid and to pin 1 of the connectors.
128-255 Frost inserted
9 Focus 000-255
10 Pan 000-255
12 Tilt 000-255
w w w . a l i e n p r o . c o m . m x w w w . a l i e n p r o . c o m . m x
2 11
Rigging (Optional)
This equipment can be positioned and fixed by clamp in every direction of the stage. Locking system makes
it easy to fasten to the bracket.
Attention! Two clamps are needed to fix the equipment. Every clamp is locked by fastener of 1/4 kind.
Channel Detail Fastener can only be locked clockwise.
DMX Channel 16CH
Channel Function DMX Value Feature
Attention! Fasten a safety string to the additional hole of side aluminum piece. The secondary accessory
can not hang on the delivery handle. Nip the equipment on bracket.
16Bit
000-004 WHITE
005-008 WHITE+RED - Check if rigging clamp (not including the one inside) damaged or not? If stand ten times weight as the
009-012 RED
013-017 RED+ORANGE equipment. Make sure the architecture can stand ten times weight as all the equipments, clamps, wirings
018-021 ORANGE and other additional fixtures.
022-025 ORANGE+AQUAMARINE
026-029 AQUAMARINE
- Screws for clamping must be fixed firmly. Take one M12 screw (Grade 8.8 or higher) to clamp bracket, and
030-034 AQUAMARINE+GREEN then screw the nuts.
035-038 GREEN - Level the two hanging points at the bottom of clamp. Insert fastener to the bottom, lock the two levers
039-042 GREEN+LIGHT GREEN
043-046 LIGHT GREEN by 1/4 rotating clockwise; then install another clamp.
047-051 LIGHT GREEN+LAVENDER - Install on safety string which stands at least ten times weight as equipment. Terminal of the accessory is
052-055 LAVENDER
1 Color wheel 056-059 LAVENDER+PINK designed for clamps.
060-063 PINK - Make sure pan/tilt lock unlocked or not. Keep the distance more than 1M from equipment to flammable
064-068 PINK+YELLOW
069-072 YELLOW
material or lighting source.
073-076 YELLOW+MEGANTA
077-081 MEGANTA
082-085 MAGENTA+CYAN
086-089 CYAN
090-093 CYAN+CTO260
094-098 CTO260
099-102 CTO260+CTO190
103-106 CTO190
107-110 CTO190+CTB8000
111-115 CTB8000
116-119 CTB8000+BLUE
120-123 BLUE
124-127 BLUE+WHITE
128-255 Slow to fast rotation
2 000-003 Closed
004-103 Slow to strobe(1-12flash/sec)
104-107 Open
Stop/strobe
108-207 Slow to fast pulsation Figure 2 Installation
208-212 Open
213-225 Random slow strobe
226-238 Random medium strobe Rigging (Optional)
239-251 Random medium strobe
252-255 Open The light panel diagram show as Figure 3, Left area is TFT Displayer, support touch, and right area is KEY,
3 Dimmer 000-255
000-003
0-100% dimmer
White
both of touch and KEY can operate light and setting.
004-007 Gobo 1 Display & operation just like ‘Android operation system, touch the item will set or modify setting.
008-011 Gobo 2 Note: Prevent damage the touch or TFT displayer, Can not use sharp objects chick displayer.
012-015 Gobo 3
016-019 Gobo 4
020-023 Gobo 5
024-027 Gobo 6
028-031 Gobo 7
032-035 Gobo 8
036-039 Gobo 9
040-043 Gobo 10
044-047 Gobo 11
048-051 Gobo 12
052-055 Gobo 13
056-059 Gobo 14
060-063 Gobo 15 Figure 3 Panel diagram
w w w . a l i e n p r o . c o m . m x w w w . a l i e n p r o . c o m . m x
10 3
Channel Table
DMX Channel 16CH
GOBO COLOR
w w w . a l i e n p r o . c o m . m x w w w . a l i e n p r o . c o m . m x
4 9
Operation
2.2.4 Sub Menu(Parameter)
Chick item of main menu, enter corresponding sub menu, shown in Figure 6, total 6 sub menu, includes
- Tilt Invert: Reverse TILT move class of parameter and status:
OFF--> Tilt Normal move. (Default) - ADDRESS: Set light DMX address.
ON--> Reverse Tilt move. - WORKMOD: Set light work mode, master or slave mode when in auto run mode.
- P/T Rectify: Disable or enable position rectify function. - DISPLAY: Set display parameter, eg. select language.
OFF--> Disable P/T rectify - TEST: Used for test light, modify DMX channel data to test function, the corresponding function of
ON--> Enable P/T rectify-(Default) reference channel function table.
- Pan Offset: Set PAN original position. Default: 10 - ADVANCE: Set light running parameter.
- Tilt Offset: Set TILT original position. Default: 10 - STATUS: View light current status.
- Lamp when: PowerON--> Turn on the lamp when power on.(Default)
RstDone--> Turn on the lamp after reset.
Manual--> Manually turn on the lamp.
- Data hold:
OFF--> When no DMX signal, return to middle position. (Default)
ON--> When no DMX signal, stop in the final position.
- Factory Setting: Restore all parameter to factory setting.
Click to reset.
w w w . a l i e n p r o . c o m . m x w w w . a l i e n p r o . c o m . m x
8 5
Operation
- Touch enable: Disable or enable touch function,.
ON--> Enable touch function.(Default)
2.3.2 MODE--> Work Mode: Set Light Work Mode OFF--> Disable touch function.
Enter the page of ‘Work Mode’ as shown in Figure 8 and modify setting. Can set light work mode, control - Touch adjust: Adjust touch function. Normally, not enter this item.
lamp and DMX channel mode.
2.3.4 TEST--> Test Mode
Enter the page as shown in Figure 10, light will into test mode, in this mode, the light does not receive the
data for DMX controller: