0% found this document useful (0 votes)
10 views28 pages

Service Ether

Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
10 views28 pages

Service Ether

Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 28

Serial Servers

Serial-to-Ethernet

Digi serial servers are configurable, easy-to-use network devices that convert
serial data into network data, providing the flexibility needed to meet a wide range
of demanding application requirements. They consist of all the vital components
required to provide full network connectivity to any device with a serial port: an
optimized and robust TCP/IP protocol stack, remote management capabilities, and
a variety of serial and network interface options. In addition to providing TCP,
UDP, SSH and SSL connectivity for network-aware applications, Digi’s patented
RealPort® technology delivers a fully transparent COM or TTY connection
without any need for modifications to the existing software or hardware
components in your application.

Digi serial server technology combines the inherent benefits of data networking
with proven asynchronous connectivity. It transforms a previously isolated
device with a serial port into a fully network-enabled component, and also
migrates expensive dial-on-demand or “nailed up” phone line solutions to work
over local or wide area networks. The benefits are clear: immediate access to
information, improved flexibility and a significant reduction of operating costs.

With Digi serial servers, you can directly access, manage and control devices
through the network. Wherever you are, you are connected – anytime. All without
the time-consuming hassle and additional cost of separate wiring or the setup of
campus modems, simply by taking advantage of your existing network
infrastructure.

What do you need to do?


+ Add simple, cost-effective network connectivity to one or more serial devices............... Digi One SP,
...................................................................................................................................... Digi Connect SP,
...................................................................................................................................... PortServer TS
+ Add cost-effective network connectivity to one or more RS-232/422/485 devices.......... PortServer TS MEI
+ Ethernet-enable a serial device in extended temperature or hazardous environments .... PortServer TS H MEI,
...................................................................................................................................... PortServer TS Hcc MEI,
...................................................................................................................................... PortServer TS Haz MEI
+ Integrate an RS-232/422/485 serial device to an 802.11b wireless network................... PortServer TS W MEI,
...................................................................................................................................... Digi Connect Wi-SP
+ Migrate industrial devices from basic serial-to-Ethernet functionality to advanced
industrial protocol conversion, even in hazardous environments.................................... Digi One IAP,
...................................................................................................................................... Digi One IAP Haz
+ Gain universal serial to IP network connectivity with versatile powering options
including powered Ethernet and powered serial............................................................. PortServer TS P MEI
+ Add both IP networking and phone line dial-up connectivity for remote
access to serial and Ethernet devices............................................................................... PortServer TS M MEI
+ Add network connectivity to Model 170 traffic signal controller equipment.................. Digi Connect N2S-170
+ Provide extended electrical isolation to connected serial devices for added safety.......... Digi Connect ES
+ Utilize an off-the-shelf development platform for easy embedded networking . ............. Digi Connect SP

12 www.digi.com/serialservers
+ Serial Servers – Serial-to-Ethernet

1 to 4 Ports
Standard
• PortServer® TS 1/2/4...................................................................... pg. 19

Multi-Electrical Interface (RS-232/422/485)


• PortServer® TS 1/2/4 MEI................................................................ pg. 20
• PortServer® TS H MEI (Hardened/Extended Temperature).................... pg. 21
• PortServer® TS Hcc MEI (Conformal Coated)....................................... pg. 22
• PortServer® TS Haz MEI (Hazardous)................................................ pg. 23
• PortServer® TS W MEI (Wireless)...................................................... pg. 24
• PortServer® TS M MEI (Modem)........................................................ pg. 25
• PortServer® TS P MEI (Power)............................................................ pg. 26
• Digi One® SP................................................................................... pg. 27

Customizable
• Digi Connect SP®............................................................................. pg. 28-29
• Digi Connect® Wi-SP........................................................................ pg. 30
• Digi Connect® N2S-170................................................................... pg. 31

Industrial
• Digi One® IAP................................................................................. pg. 32
• Digi One® IAP Haz.......................................................................... pg. 33
• Digi One® IA................................................................................... pg. 34
• Digi One® SP IA.............................................................................. pg. 35

8 or More Ports
• PortServer® TS 8/16......................................................................... pg. 36
• EtherLite®........................................................................................ pg. 37
• Digi Connect® ES (Extended Electrical Safety)..................................... pg. 38

Management Tools/Special Features



• RealPort®........................................................................................ pg. 39
• RealPort® with Encryption................................................................. pg. 39
• Digi Port Authority – Remote............................................................. pg. 40

• Pass-Through Port............................................................................ pg. 40
• Modem Emulation............................................................................ pg. 41
• FIPS Certification.............................................................................. pg. 41

www.digi.com/serialservers 13
EI
e

EI
ac

EI

M
4

EI

EI
rf

EI
M
2/

2/

M
te

M
az

M
c
Hc
1/

1/
In

M
TS
al
TS

TS

TS

TS
s

TS

TS
rt

ic

er
er

er

er

er
tr
Po

er

er
rv
ec
rd

rv

rv

rv

rv

rv

rv
Se
El
Se

Se

Se

Se
da
4

Se

Se
ti-

rt
rt

rt

rt

rt
an
to

rt

rt
ul

Po
Po

Po

Po

Po

Po

Po
M
St
1
Serial Ports 1/2/4 1/2/4 1/2/4 1/2/4 1/2/4 1/2/4 1/3

Serial
RJ-45 RJ-45 RJ-45 RJ-45 RJ-45 RJ-45 RJ-45
Connector
RS-232/ RS-232/ RS-232/ RS-232/ RS-232/ RS-232/
Serial Type RS-232
422/485 422/485 422/485 422/485 422/485 422/485

10/100Base-T • • • • • • •

Baud 230 Kbps 230 Kbps 230 Kbps 230 Kbps 230 Kbps 230 Kbps 230 Kbps

DHCP, RARP, Static IP,


ARP-Ping
• • • • • • •

TCP/UDP • • • • • • •

Modbus/TCP • • • • • • •
External Serial Servers Features Chart

Telnet/Reverse
Telnet
• • • • • • •

HTTP • • • • • • •

HTTPS • • • • • • •
SSHv2 Server,
SSL/TLS • • • • • • •

SNMP • • • • • • •

Port Buffering • • • • • • •

Modem Emulation • • • • • • •

DIN Rail • • • • • • •
(optional) (optional) (optional) (optional) (optional) (optional) (optional)

9-30VDC • • • • • • •
RealPort RealPort RealPort RealPort RealPort RealPort RealPort
COM/TTY Driver with with with with with with with
Encryption Encryption Encryption Encryption Encryption Encryption Encryption
• Extended • Extended • Class 1, • 802.11b • Internal
temp temp Div 2 wireless modem
Special Features • Extended
(-35º C (-35º C
temp
to 74º C) to 74º C) (-35º C
• Conformal to 74º C)
coated • Conformal
circuit coated
board circuit
• NEMA TS 2 board

14 www.digi.com/serialservers
70
EI

-1
P
M

i-S

az
2S
P
P

tW

H
tN
tS
TS

P
bl
SP

IA

IA
ne

ne

ne
er

l
iz

ia
ne

ne

ne
rv

on

on

on
om

r
Se

iO

iO

iO
st
iC

iC

iC

du
st
rt

ig

ig

ig

ig

ig

ig
Po

Cu

In
D

D
1/2/4 1 1 1/2 N/A 1 1
DB-9 and DB-9 and
DB-9 DB-9 DB-9 DB-9 N/A screw screw
terminals terminals
RS-232 or
RS-232/ RS-232/ RS-232/ RS-232/ RS-232/
RS-232/ N/A
422/485 422/485 422/485 422/485 422/485 422/485

• • • • • • •

230 Kbps 230 Kbps 230 Kbps 230 Kbps N/A 230 Kbps 230 Kbps

• • • • • • •

• • • • • • •

• • •

• • • • • • •

• • • • • • •

• • • •

• • •

• • • •

• • •

• • • • • •
• • •
(optional)

• • • • • •
RealPort RealPort
with RealPort RealPort with RealPort RealPort RealPort
Encryption Encryption
• Powered • IPv6 ready • 802.11b • Ethernet • Class 1, • Class 1,
serial • Custom- wireless; network Div 2 Div 2
controller • Extended
• Powered ization WPA2/ • Designed temp
Ethernet options 802.11i for Model (-35º C to
wireless 170 74º C)
security traffic • Conformal
signal coated
controller circuit
equipment board

www.digi.com/serialservers 15
ily
m
Fa
ts

16
r

8/
Po

S
IA

tE
TS
e
SP

c
IA

ne
er
or
l
ia

ne

ne

rv

te

on
M
r

Li
Se
iO

iO
st

iC
r
or
du

he
rt
ig

ig

ig
Po
In

Et
D

D
8
2/8/
Serial Ports 1 1 8/16 4/8/16
16/32
DB-9 and
Serial screw DB-9 RJ-45 RJ-45 RJ-45
Connector terminals
RS-232 or RS-232/
RS-232/ RS-232/
Serial Type RS-232/ 422/485 or RS-232
422/485 422/485 422/485 RS-422/485

10/100Base-T • • • • •

Baud 230 Kbps 230 Kbps 230 Kbps 115 Kbps 230 Kbps

DHCP, RARP, Static IP, •


ARP-Ping • • • (static IP or •
bootp only)

TCP/UDP • • • •

Modbus/TCP • •
External Serial Servers Features Chart

Telnet/Reverse
Telnet • • • •

HTTP • • • •

HTTPS • • •
SSHv2 Server,
SSL/TLS • • •

SNMP • • •

Port Buffering

Modem Emulation • • • •

DIN Rail •
• (via kit)

9-30VDC • •
RealPort RealPort RealPort RealPort
COM/TTY Driver with RealPort with with with
Encryption Encryption Encryption Encryption
• Pass- • DIN rail • 48VDC • Galvanic
through
Special Features and wall models port
port
• Industrial
mount kit isolation
protocol • Ethernet
bridging switch on
• Class 1, 8/16-port
Div 2 models

16 www.digi.com/serialservers
PortServer TS 1/2/4 PortServer TS 1/2/4 MEI PortServer TS 1/2/4 H MEI
Multi-Electrical Interface

5.25” 5.25” 5.25”


(13.34) (13.34) (13.34)
0.95” 0.95” 0.95”
(2.41) (2.41) (2.41)
3.30” 3.30” 3.30”
(8.46) (8.46) (8.46)
PortServer TS 1/2/4 Hcc MEI PortServer TS Haz MEI PortServer TS 1/2/4 W MEI
Multi-Electrical Interface

5.25”
(13.34)

5.25” 5.25” 4.00”


(13.34) (13.34) (10.16)
0.95” 0.95” 0.95”
(2.41) (2.41) (2.41)
3.30” 3.30” 3.30”
(8.46) (8.46) (8.46)
PortServer TS 1/3 M MEI PortServer TS 1/2/4 P MEI Digi One SP
Multi-Electrical Interface

0.93”
(2.30)

5.25”
(13.34)

3.70”
5.25” (9.40)
(13.34)
0.95” 0.95”
(2.41) (2.41)
3.30” 3.30” 1.72”
Serial-to-Ethernet

(8.46) (8.46) (4.30)

Digi Connect SP Digi Connect Wi-SP Digi Connect N2S-170


Customizable

0.74”
(1.87)

0.99”
3.87” (2.51)
(9.83) 9.00”
0.99”
3.87” (22.86)
(2.51)
(9.83) 6.25”
1.68” 1.68”
(4.27) (4.27) (15.88)

Measurements: inch
(cm)

www.digi.com/serialservers 17
Industrial Digi One IA Digi One IAP Digi One IAP Haz

0.90” 0.90”
0.90”
(2.29) (2.29)
(2.29)
4.70” 4.70” 4.70”
(11.94) (11.94) (11.94)
4.00” 4.00” 4.00”
(10.16) (10.16) (10.16)

Digi One SP IA PortServer TS 8 PortServer TS 16

8 or More Ports
Industrial

3.70” 3.70” 6.60”


(9.40) (9.40) (16.76)
1.00”
(2.54) 1.40”
(3.60)
8.30”
0.93” (21.08) 13.40”
(2.30) (34.04)
1.72”
(4.30)
PortServer TS 16 Rack, EtherLite 32 EtherLite 160
PortServer TS 16 8/16 MEI

7.60” 5.40”
6.60” (19.20) (13.80)
(16.76) 1.60”
(4.06) 1.80” 1.20”
(4.50) (2.90)

16.80” 15.10” 11.5”


8 or More Ports

(42.70) (38.40) (29.30)


Serial-to-Ethernet

EtherLite 2 Digi Connect ES

2.10”
(4.20)
3.80”
(9.50) 9.30”
(23.50)
1.20”
(2.90)
6.30”
(16.00) 10.60”
(26.90)

Measurements: inch
(cm)

Digi’s patented RealPort COM/TTY redirector is a standard feature of our serial servers.
Its comprehensive OS support includes:

• Microsoft Windows Server 2003 • Linux


• Microsoft Windows Vista • AIX
• Microsoft Windows XP • True 64
• Microsoft Windows 2000 • Sun Solaris SPARC and Intel
• Microsoft Windows 98 • HP-UX
• Microsoft Windows Me • NCR UNIX MP-RAS
• Microsoft Windows NT
• SCO Open Server and UnixWare See page 39 for more information about RealPort.

18 www.digi.com/serialservers
PortServer® TS 1/2/4 :: Standard Serial Servers
Overview :: The PortServer TS 1/2/4 family + +
delivers simple and reliable serial-to-Ethernet
connectivity in a common serial pinout (also shared
with the PortServer TS 8/16). It addresses the
growing need to connect individual serial devices to
the network over industry standard Ethernet. Power
monitoring and security features make these devices
ideal for large deployments and especially replicated
or remote installments.

+ +
+ Features + Specifications
• Easy configuration using installation CD • 10/100Base-T Ethernet support
• Digi’s patented RealPort® with encryption and authentication • 1, 2 or 4 serial ports (RJ-45)
for COM or TTY port control and management • RS-232
• TCP/UDP Socket Services for broad device connectivity • Baud rates up to 230 Kbps
and application use • Full modem and hardware flow control
• Auto-connect the serial device to networked server • Modem emulation
using raw, Telnet, Rlogin • TCP/UDP Socket Services
• SNMP for easy network management • Telnet and Reverse Telnet
• Reverse SSH for direct SSH socket connectivity to serial ports • DHCP/RARP/ARP-Ping for IP address assignment
• NIST FIPS-197 certified (secure AES) • PPP
• PPP for dial-up network access to serial devices and remote • SNMP
networks • SSH server for secure management of the PortServer TS
• Easy configuration through web interface (HTTP/HTTPS) • SSH server socket support for secure direct connections to
• Modem emulation allows support for devices designed serial ports
only for modem communications • SSL/TLS
• Tunable for low latency or optimized throughput • HTTP configuration
• 5-year warranty • Patented RealPort technology for COM and TTY ports
• 9-30VDC power supply included
PC Server • RFC 2217 support
• LED status for link and power
IP Enabling Serial • DIN rail and mounting options
Retail/POS Equipment
PortServer TS Family - Front
Ethernet

Bar-code Credit Card Ethernet LEDs LEDs Power


Scanner Reader

RS-232 Port
Tse
rv er®
TS

PortServer TS Family - Back


PortServer TS ®

RJ-45 Serial

See page 36 for 8- and 16-port versions.


1-Port
2-Port
4-Port

Part Numbers North America International


Model
PortServer TS 1 – 1 port 70002041 70002042
PortServer TS 2 – 2 ports 70002043 70002044
PortServer TS 4 – 4 ports 70002045 70002046

All cables and accessories: pg. 158-159.

www.digi.com/portserverts 19
PortServer® TS 1/2/4 MEI :: Multi-Electrical Interface Serial Servers

+ + Overview :: PortServer TS MEI (Multi-


Electrical Interface), offers the same features of the
PortServer TS, but adds the capability to support
RS-232/422/485 serial devices. Available in one-,
two- and four-port models, it is ideal for installations
involving specialized devices that require these
different cabling options.

+ +
+ Features + Specifications
• Switch selectable RS-232/422/485 for simple • 10/100Base-T Ethernet support
interfacing to virtually any type of serial device • 1, 2 or 4 serial ports (RJ-45)
• Digi’s patented RealPort® with encryption and authentication • Switch selectable RS-232/422/485
for COM or TTY port control and management • Baud rates up to 230 Kbps
• Management and diagnostic utility for simple and • TCP/UDP/Telnet Socket Services
efficient device monitoring and troubleshooting • Patented RealPort with encryption and authentication
• Modem emulation allows the serial server to function • 9-30VDC input
as a modem • Modem emulation
• NIST FIPS-197-certified (secure AES) • SNMP (read/write)
• Secure communication via SSHv2 and SSL/TLS • PPP
• Port buffering for data capture • SSHv2, SSL/TLS
• Easy configuration through web browser interface • Port buffering
(HTTP/HTTPS) • Modbus to Modbus/TCP conversion
• SNMP for easy network management • HTTP/HTTPS
• PPP for dial-up network access to serial devices and remote • DHCP/RARP/ARP-Ping for IP address assignment
networks • RFC 2217 support
• Tunable for low latency or optimized throughput • DIN rail and mounting options
• 5-year warranty
PortServer TS MEI Family - Front

Central Location
Advanced Serial
Device Networking
Internet Ethernet LEDs LEDs Power

Ethernet
PortServer TS MEI Family - Back

RJ-45 Serial

Router PBX 1-Port


2-Port
4-Port
RS-232/422/485
EI
SM
®T
Se rver
Port

PortServer ® TS MEI

Part Numbers North America International


Model
PortServer TS 1 MEI – 1 port 70001805 70001832
PortServer TS 2 MEI – 2 ports 70001806 70001833
PortServer TS 4 MEI – 4 ports 70001807 70001834

All cables and accessories: pg. 158-159.

20 www.digi.com/portservertsmei
PortServer® TS H MEI :: Multi-Electrical Interface Serial Servers (Hardened)
Overview :: PortServer TS H MEI is designed + +
specifically for traffic management, pipelines or
any remote application requiring a hardened
serial-to-Ethernet solution that can withstand
extreme temperatures (-35° C to 74° C).
Available in one-, two-, and four-port versions,
PortServer TS H MEI makes it easy to network-
enable and remotely manage fuel tank monitors, flow
meters, telemetry equipment, heating and cooling
systems, or any RS-232/422/485 serial device.

+ +
+ Features + Specifications
• Robust, hardened model with extended temperature range • 10/100Base-T Ethernet support
of -35º C to 74º C (-31º F to 165º F) • 1, 2 or 4 serial ports (RJ-45)
• RS-232/422/485 switch selectable on Port 1, RS-232 on • Switch selectable RS-232/422/485
all other ports • Baud rates up to 230 Kbps
• Digi’s patented RealPort® with encryption and authentication • TCP/UDP/Telnet Socket Services
for COM or TTY port control and management • Patented RealPort with encryption and authentication
• Monitoring and diagnostic utility for simple and efficient • 9-30VDC input
device monitoring and troubleshooting • Locking barrel power connector; hardened power supply sold
• NIST FIPS-197 certified (secure AES) separately
• Secure communication via SSHv2 and SSL/TLS • Modem emulation
• Port buffering for data capture • SNMP (read/write)
• Easy configuration through web browser interface (HTTP) • PPP
• Tunable for low latency or optimized throughput • SSHv2
• 9-30VDC power with bare-wire “pigtail” for direct connection • Port buffering
• 5-year warranty • Modbus to Modbus/TCP conversion
• HTTP
SCADA
Server
Utilities • Digi Port Authority – Remote management diagnostics
Master Management and auto-discovery tool
Data
Center • DHCP/RARP/ARP-Ping for IP address assignment
WAN
• RFC 2217 support
• DIN rail and mounting options

PortServer TS H MEI - Front


Ethernet

PortServer® TS
S H ME
M
MEI
EI
4

Ethernet Link Power Power


Activity Status
LEDs LEDs

RS-232/485
485 RS-232/485 PortServer TS H MEI - Back

RJ-45 Serial

1-Port
2-Port
Power Meter Relay 4-Port
Reclosure
RTU

Part Numbers North America International


Model
PortServer TS 1 H MEI - 1 port 70001917 70001917
PortServer TS 2 H MEI - 2 ports 70001918 70001918
PortServer TS 4 H MEI - 4 ports 70001919 70001919
12VDC Extended Temperature Power Supply w/ Locking Barrel Connector 76000752 76000752

All cables and accessories: pg. 158-159.

www.digi.com/portservertshmei 21
PortServer® TS Hcc MEI :: Multi-Electrical Interface Serial Servers (Conformal Coated)

+ + Overview :: The PortServer TS Hcc MEI family


of serial servers delivers high-performance serial-to-
Ethernet connectivity. It is designed with a conformal
coated circuit board for environments that require
extended temperatures, such as traffic management
installations, utility plants and pipelines. Available in
one-, two-, and four-port versions, PortServer TS Hcc
MEI makes it easy to network-enable and remotely
manage variable message signs, loop detectors, ramp
meters or any RS-232/422/485 serial device.

+ +
+ Features + Specifications
• Robust, hardened model with extended temperature range • Conformal coated circuit board
of -35° C to 74° C (-31º F to 165º F) • 10/100Base-T Ethernet support
• NEMA TS 2 certified • 1, 2 or 4 serial ports (RJ-45)
• Conformal coated circuit board • Switch selectable RS-232/422/485
• Ships in “Latency Mode and TCP Keepalive” setting • Baud rates up to 230 Kbps
• RS-232/422/485 switch selectable on all ports • TCP/UDP/Telnet Socket Services
• Digi’s patented RealPort® with encryption and authentication • Patented RealPort with encryption and authentication
for COM or TTY port control and management • 9-30VDC input
• Monitoring and diagnostic utility for simple and efficient • Screw terminal power connector; no power supply included
device monitoring and troubleshooting • Modem emulation
• NIST FIPS-197 certified (secure AES) • SNMP (read/write)
• Data security via SSHv2 and SSL/TLS • PPP
• Port buffering for data capture • SSHv2
• Easy configuration through web interface (HTTP) • Port buffering
• Tunable for low latency or optimized throughput • Modbus to Modbus/TCP conversion
• 9-30VDC power with screw terminal connector • HTTP
• 5-year warranty • Digi Port Authority – Remote management diagnostics and
auto-discovery tool
Traffic • DHCP/RARP/ARP-Ping for IP address assignment
Control Traffic Management • RFC 2217 support
Center
• DIN rail and mounting options

Ethernet PortServer TS Hcc MEI - Front

74˚ C

Reset
-35˚ C PortServer
P
Po r Ser
rt ®
TS HCC MEI
Ethernet Link Power Power Input
RS-232 Activity Status (Screw Terminals)
RS-485 LEDs LEDs
PTZ

FIC
Variable
iable PortServer TS Hcc MEI - Back
AF T Messaging
i
TR DEN
CI IT
AC T EX System
N E X Weather/
Surface
Monitor RJ-45 Serial
Traffic Controller
1-Port
2-Port
4-Port

Part Numbers North America International


Model
PortServer TS 1 Hcc MEI - 1 port 70002038 70002038
PortServer TS 2 Hcc MEI - 2 ports 70002039 70002039
PortServer TS 4 Hcc MEI - 4 ports 70002040 70002040
12VDC, 100-240VAC Extended Temperature Power Supply (no plug) 76000736 76000736

All cables and accessories: pg. 158-159.

22 www.digi.com/portservertshccmei
PortServer® TS Haz MEI :: Multi-Electrical Interface Serial Servers (Hazardous)

Overview :: The PortServer TS Haz MEI makes + +


it easy to connect one to four serial devices to your
network, even in applications where environmental
hazards demand extended safety features and
operating tolerances. With a conformal coated circuit
board, extended temperature tolerance and the ability
to safely perform in flammable environments (Class 1,
Division 2 certified), it is the ideal device connectivity
solution for applications in factory automation and
utility management (gas, electric and water).

+ +
+ Features + Specifications
• Robust, hardened model with extended temperature range • Conformal coated circuit board
of -35° C to 74° C (-31º F to 165º F) • 10/100Base-T Ethernet support
• Class 1, Division 2 rated • 1, 2 or 4 serial ports (RJ-45)
• Conformal coated circuit board • Switch selectable RS-232/422/485
• Ships in “Latency Mode and TCP Keepalive” setting • Baud rates up to 230 Kbps
• RS-232/422/485 switch selectable on all ports • TCP/UDP/Telnet Socket Services
• Digi’s patented RealPort® with encryption and authentication • Patented RealPort with encryption and authentication
for COM or TTY port control and management • 9-30VDC input
• Monitoring and diagnostic utility for simple and efficient • Screw terminal power connector; no power supply included
device monitoring and troubleshooting • Modem emulation
• Data security via SSHv2 and SSL/TLS • SNMP (read/write)
• Port buffering for data capture • PPP
• Easy configuration through web interface (HTTP) • SSHv2
• Tunable for low latency or optimized throughput • Port buffering
• 9-30VDC power with screw terminal connector • Modbus to Modbus/TCP conversion
• 5-year warranty • HTTP
• Digi Port Authority – Remote management diagnostics and
Hazardous auto-discovery tool
• DHCP/RARP/ARP-Ping for IP address assignment
Factory Environment • RFC 2217 support
• DIN rail and mounting options
Ethernet
PortServer TS Haz MEI - Front

PortServer
P
Po r Serv ® TS Haz MEI
rt

Reset
Serial
ial Ethernet Link Power Power Input
Activity Status (Screw Terminals)
LEDs LEDs

PortServer TS Haz MEI - Back


Nitrogen Hydrogen Oxygen
Tank Tank Tank
RJ-45 Serial

Bulk Material Tanks 1-Port


2-Port
4-Port

Part Numbers North America International


Model
PortServer TS 1 Haz MEI - 1 port 70002318 70002318
PortServer TS 2 Haz MEI - 2 ports 70002319 70002319
PortServer TS 4 Haz MEI - 4 ports 70002320 70002320
12VDC, 100-240VAC Extended Temperature Power Supply (no plug) 76000736 76000736

All cables and accessories: pg. 158-159.

www.digi.com/portservertshazmei 23
PortServer® TS W MEI :: Multi-Electrical Interface Serial Servers (Wireless)

+ + Overview :: PortServer TS W MEI is designed to


easily integrate any RS-232/422/485 serial device
to an 802.11b wireless Ethernet network. It is ideal
for use in environments where wired LANs are
not feasible or where serial devices are periodically
moved.

+ +
+ Features + Specifications
• Easily connect serial devices to an 802.11b wireless Ethernet • 10/100Base-T Ethernet support
network interface • 1, 2 or 4 serial ports (RJ-45)
• Digi’s patented RealPort® with encryption and authentication • Switch selectable RS-232/422/485
for COM or TTY port control and management • Baud rates up to 115.2 Kbps
• External antenna connector (SMA) can also be used with • 802.11b wireless radio
third party antenna for extended range/performance • WEP supporting 64-bit and 128-bit encryption
• Includes four-inch 50 ohm swivel dipole antenna • TCP/UDP/Telnet Socket Services
• Switch selectable RS-232/422/485 for simple interfacing to • Patented RealPort with encryption and authentication
any type of serial device • RFC 2217 support
• Monitoring and diagnostics utility for simple and efficient • 9-30VDC input
device monitoring and troubleshooting • Modem emulation
• NIST FIPS-197 certified (secure AES) • SNMP (read/write)
• Data security via SSHv2, and SSL/TLS • PPP
• Wired Equivalent Privacy (WEP) • SSHv2
• Easy configuration through web browser interface (HTTP) • Port buffering
• Tunable for low latency or optimized throughput • Tunable latency
• 5-year warranty • Modbus to Modbus/TCP conversion
• DIN rail and mounting options
Primary Server
Windows XP
Wireless Inventory PortServer TS W MEI - Side
Management

Ethernet
Wi-Fi PortServer TS W MEI - Front Antenna
Access Connector (SMA)
Point

PortServer® TS W MEI
I
ME ries
W s Se
TS Wireles
VER
SER
PORT

RS-232/422/485 4-Inch Ethernet Link Power Power PortServer TS W MEI - Back


RS-232/422/485 Swivel Activity Status
Bar-Code
Scanner Dipole LEDs LEDs
Antenna
Overhead RJ-45 Serial

Scanner
1-Port
2-Port
Shipping/Receiving Dock Printer 4-Port

Part Numbers North America International


Model
PortServer TS 1 W MEI – 1 port 70001954 70001955
PortServer TS 2 W MEI – 2 ports 70001956 70001957
PortServer TS 4 W MEI – 4 ports 70001958 70001959

All cables and accessories: pg. 158-159.

24 www.digi.com/portservertswmei
PortServer® TS M MEI :: Multi-Electrical Interface Serial Servers (Modem)
Overview :: PortServer TS M MEI offers Ethernet + +
and RS-232/422/485 serial connections, with the
added flexibility of an internal modem. The one- and
three-port serial servers are ideal for applications
requiring both IP networking and standard phone
line dial-up connectivity for remote access to serial
devices.

+ +
+ Features + Specifications
• Easily connect to remote networks and devices • 10/100Base-T Ethernet support
• Internal V.92 modem • 1 or 3 serial ports (RJ-45)
• Switch selectable RS-232/422/485 for simple • Switch selectable RS-232/422/485
interfacing to any type of serial device • RJ-45 modem serial port connection
• Digi’s patented RealPort® with encryption and authentication • Baud rates up to 230 Kbps (serial ports)
for COM or TTY port control and management • Internal v.90/v.92 modem
• NIST FIPS-197 certified (secure AES) • Full modem and hardware flow control
• PPP and SSH for creating secure IP network over • DHCP/RARP/ARP-Ping for IP address assignment
serial connection • Low latency
• Easy IP assignment via DHCP, RARP, ARP-Ping or • TCP/UDP Socket Services
Digi-provided tools (included) • Telnet and Reverse Telnet
• Tunable for low latency or optimized throughput • Patented RealPort technology with encryption and
• 5-year warranty authentication
• RFC 2217 support
• PPP
Remote Dial-Up
• SSHv2
Modem • Port buffering
RS-232 Server • Modbus/TCP protocol conversion
• HTTP/HTTPS
WAN
Ethernet • SNMPv1 (read/write)
• DIN rail and mounting options
Telephone Lines Ethernet

I
MESeries
S MModem
RT
VE
SER
PORT

PortServer TS M MEI - Front PortServer TS M MEI - Back


PortServer® TS M ME
MEI
EI
RS-232
232
2

Telephone Lines
RJ-45 Serial

1-Port
Oil & Gas Pipeline RTU Ethernet 3-Port
Link Power Power RJ-11
Activity Status Modem
LEDs LEDs

Part Numbers North America International


Model
PortServer TS 1 M MEI – 1 port 70001898 70001985
PortServer TS 3 M MEI – 3 ports 70001899 70001986

All cables and accessories: pg. 158-159.

www.digi.com/portservertsmmei 25
PortServer® TS P MEI :: Multi-Electrical Interface Serial Servers (Power)

+ + Overview :: The PortServer TS P MEI Power Series


is designed for universal, high-performance serial-
to-Ethernet connectivity with versatile powering
options. It is ideal for RS-232/422/485 applications
where traditional power alternatives such as powered
Ethernet (802.3af) and powered serial are required.
PortServer TS P MEI can be powered by an external
device via the serial port (power in) or can power
an external device via the serial port (power out) for
added flexibility.

+ +
+ Features + Specifications
• Supports powered Ethernet (802.3af) or powered serial for • 10/100Base-T Ethernet support
versatile and redundant powering options • 1, 2 or 4 serial ports
• Easily network-enable multiple serial devices • Switch selectable RS-232/422/485
• RS-232/422/485 for simple interfacing to virtually • Baud rates up to 230 Kbps
any type of serial device • Full modem and hardware flow control
• Digi’s patented RealPort® with encryption and authentication • TCP/UDP Socket Services
for COM or TTY port control and management • Telnet, SSHv2
• Management and diagnostic utility for simple and • 802.3af powered Ethernet (end- and mid-span support)
efficient device monitoring and troubleshooting • SNMP (read/write)
• Modem emulation for easy integration and replacement • PPP
of modems • Tunable latency
• Secure communication via SSHv2 • Modbus to Modbus/TCP conversion
• Port buffering for data capture • HTTP
• Easy configuration through web browser interface • DHCP/RARP/ARP-Ping for IP address assignment
• SNMP for easy network management • RFC 2217 support
• Tunable for low latency or optimized throughput
• 5-year warranty Serial Power Input
• DC input connector, 9-30VDC, 525 mA max
• Serial Port 1, Pin 1 (RI), 9-30VDC, 525 mA max

Central Location Serial Power Output


• Available on all serial ports
Networking with • 1 watt available power with selectable voltage level
Power Flexibility • Pin 1 (RI) 5VDC up to 200 mA max
Internet • Pin 9 (DTR) 9VDC up to 100 mA max

Ethernet

PortServer TS P MEI - Front PortServer TS P MEI - Back

Router PBX
I
ME ries
S PPower Se RJ-45 Serial
RT
VE
RT
SER
PO

RS-232/422/485 1-Port
2-Port
Ethernet Reset Power 4-Port
PortServer® TS P MEI
Link Power
Activity Status
LEDs LEDs

Part Numbers North America North America International



Model
(end-/mid-span PoE) (mid-span PoE) (end-/mid-span PoE)
PortServer TS 1 P MEI – 1 port 70002314 70001988 70001991
PortServer TS 2 P MEI – 2 ports 70002315 70001989 70001992
PortServer TS 4 P MEI – 4 ports 70002316 70001990 70001993

All cables and accessories: pg. 158-159.

26 www.digi.com/portservertspmei
Digi One® SP :: Multi-Electrical Interface Serial Servers
Overview :: The Digi One SP enables easy Ethernet + +
connectivity for any device with a serial port. Its
compact design delivers cost-effective performance
and capability in one of the smallest form factors
available. It is ideal for applications requiring simple
and easy-to-use data communications.

+ +
+ Features + Specifications
• Easy configuration using installation CD • 10/100Base-T Ethernet support
• Compact form factor – only 3.70 in (9.04 cm) in length • 1 serial port (DB-9M)
• Digi’s patented RealPort® redirector for COM or TTY • Switch selectable RS-232/422/485
port control and management • Baud rates up to 230 Kbps
• TCP/UDP Socket Services for broad device connectivity • Full modem and hardware flow control
and application use • Modem emulation
• Auto-connect the serial device to a networked server • TCP/UDP Socket Services
using raw, Telnet, Rlogin • Telnet and Reverse Telnet
• Reverse Telnet for easy access of serial devices • DHCP/RARP/ARP-Ping for IP address assignment
from network • HTTP configuration
• Easy configuration through web interface (HTTP) • Patented RealPort technology
• Switch selectable RS-232/422/485 serial interface supports • LED status for link and power
any type of serial device
• Modem emulation allows support for devices designed
only for modem communications
• 5-year warranty

Digi One SP - Front


Retail/POS
Handheld
Scanner
Digi One ® SP

RS-232/422/485
DB-9M Serial

Digi One SP - Back

Ethernet

Ethernet Power

Information
Management
System

Part Numbers North America International


Model
Digi One SP - 1 port 70001851 70001852

All cables and accessories: pg. 158-159.

www.digi.com/digionesp 27
Digi Connect SP® :: Standard and Customizable Serial Servers

+ + Overview :: The Digi Connect SP serial server


delivers a powerful, compact and cost-effective
off-the-shelf hardware platform for standard
plug-and-play or embedded networking solutions.

+ +
+ Features + Specifications
General Custom Firmware Versions (Development Kit)
• Compact off-the-shelf hardware platform for standard or • Digi Connect SP w/JTAG
custom network applications • Macraigor Raven JTAG debugger
• RS-232 only or switch-selectable RS-232/422/485 interface • NET+OS software components
- Throughput up to 230,400 bps - Microcross™ GNU X-Tools with command line and visual
• Integrated 10/100 Mbit network interface GDB debugger
• Flexible power input of 9-30VDC - ThreadX® Real-Time Operating System with picokernel™
• Digi’s patented RealPort® redirector for COM or TTY port architecture
control and management - Fusion™ TCP/IP stack with full networking protocol and
• IPv6 support for compatibility with next generation extended networking services support
networks - TCP, UDP, ICMP, IGMP, DNS, SNMPv2, LDAP, POP, SMTP,
• Automated security alerts via email and SNMP traps PPP, FTP, SNTP, Telnet, FastIP, Fast Sockets, Multi-Homing
• Standard firmware models for plug-and-play applications - Universal IP address assignment through Address
• Complete serial-to-network connectivity and unique Configuration Executive (ACE)
product customization flexibility - Static IP, DHCP, BOOTP, Auto-IP, RARP, ARP/Ping
• Development Kit for custom applications - Allegro Software embedded web server with HTTPS support
- Based on Digi’s royalty-free NET+OS® development - SSL 3.0/TLS 1.0 with strong encryption
platform - DES (56-bit)
- Integrated building blocks and tools significantly reduce - 3DES (168-bit)
traditional design risk, accelerate overall software - AES (128/256-bit)
development process - Flexible and robust file system supporting RAM and Flash
- Includes Digi Connect SP w/JTAG, Macraigor Raven JTG (with wear leveling)
debugger and NET+OS software components • SMICng MIB compiler
• 5-year warranty • Micro XML SAX parser
• Additional utilities
- HTML-to-C compiler
0.
00
- Flash download
Digi C
Connect
onne
on nect ® SP • Sample code
Deli Scale • Documentation
Serial • Cables
SP

D
C


• Loop-back adapter
• Power supplies

Standard Firmware Versions


Ethernet • Robust on-board TCP/IP stack with built-in web server
• Universal IP address assignment
- Static IP, DHCP, Auto-IP
• Dynamic DNS support (DHCP Option 12)
Retail/POS • Pre-defined and custom device profiles
Information • Customizable web interface with optional Java applet
Management support
System
• Telnet command line interface
• Modem emulation and port logging

28 www.digi.com/digiconnectsp
Digi Connect® SP :: Standard and Customizable Firmware Options

+ Specifications cont.
• Serial configuration interface
Run-Time Environment
- Command line, XML Remote Command Interface (RCI)
• User-defined network service/port configuration Services
Web Server: HTP 1.1
- HTTP/HTTPS, Telnet, Rlogin, Advanced Digi Discovery
Protocol (ADDP), SNMP, RealPort, SSL/TLS, TCP/UDP
Email Services: POP3, SMTP
File Transfer: FTP Client and Server
Development Tools
Installation and Configuration: ACE
• User-configurable TCP/UDP Socket ID Enterprise Connectivity: SNMP, Active Directory, Telnet,

• Data pattern event notification via email/SNMP traps Integrated file system, SSL, SNTP
Microcross
• Intelligent SNMP device management TCP/IP Stack
GNU X-Tools™

• Strong SSL/TLS based encryption TCP, UDP, ICMP, PPP, IGMP

• Patented RealPort COM/TTY port redirection for ThreadX RTOS Utilities


Microsoft® Windows®, UNIX and Linux HTML-to-C compiler
Board Support Package Flash Download

Hardware
• 32-bit NET+ARM high-performance RISC processor RAVEN JTAG Debugger
(NS7520 55 MHz) Digi Connect SP
• 4 MB Flash, 16 MB RAM
• Auto-sensing 10/100 Mbit Ethernet interface and network
link
• RS-232 or switch-selectable RS-232/422/485 serial interface
Digi Connect SP - Front Digi Connect SP - Back
(DB-9M connector)
- Throughput up to 230,400 bps
- 7/8 data bits
- 1/1.5/2 stop bits
- None/even/odd parity
DB-9M Ethernet Power
- Full signal support with software/hardware flow control Serial
• Flexible 9-30VDC power supply

Part Numbers North America International


Development Kit Models
Digi Connect SP Development Kit (GNU) – Includes unit w/JTAG interface, hardware DC-SP-01-GN DC-SP-01-GN
debugger, NET+OS platform CD, documentation, cables and power supplies.

Units for Custom Applications


Digi Connect SP (single-unit pack w/power supply) DC-SP-01-C DC-SP-01-C-W
Digi Connect SP (25-unit pack w/power supply) DC-SP-01-C-25 DC-SP-01-C-W-25
Digi Connect SP, RS-232 Only (single unit w/power supply) DC-SP-01R-C DC-SP-01R-C-W
Digi Connect SP, RS-232 Only - Bulk (25-unit pack w/power supplies) DC-SP-01R-C-25 DC-SP-01R-C-W-25

Units with Standard Firmware


Digi Connect SP, RS-232/422/485 (single unit w/power supply) DC-SP-01-S DC-SP-01-S-W
Digi Connect SP, RS-232 - Bulk (25-unit pack w/power supplies) DC-SP-01R-S-25 DC-SP-01R-S-W-25

www.digi.com/digiconnectsp 29
Digi Connect® Wi-SP :: Wireless Serial Servers

+ + Overview :: Digi Connect Wi-SP is the industry’s


first wireless serial server to provide enterprise-class
wireless security through a complete set of strong
encryption and authentication services, which are
compliant with the WPA2 and 802.11i standards.
It also offers comprehensive product customization
options and intelligent remote management and
monitoring through Digi Connectware® Manager
device management software.

+ +
+ Features + Specifications
• Robust on-board TCP/IP stack with built-in web server • 32-bit NET+ARM high-performance RISC processor
• Universal IP address assignment (NS7520 55 MHz)
- Static IP, DHCP, Auto-IP • 4 MB Flash and 16 MB RAM
• Dynamic DNS support (DHCP Option 12) • Switch-selectable RS-232/422/485 interface (DB-9M)
• Secure web user interface (HTTP/HTTPS) with context- - Throughput up to 230,400 bps
sensitive online help - Full signal support with software/hardware flow control
• Pre-defined and custom device profiles • 802.11b wireless LAN interface
• Customizable web interface with optional Java applet • Infrastructure (BSS) and Ad-Hoc Mode (IBSS)
support • Flexible 9-30VDC power supply
- File system w/512 kb user space
• Telnet command line interface
• Modem emulation and port logging Cisco ACS
• Serial configuration interface Microsoft Windows Authentication
2000 Server Server
- Command line, XML Remote Command Interface (RCI)
• User-defined network service/port configuration
- HTTP/HTTPS, Telnet, Rlogin, Advanced Digi Discovery
Protocol (ADDP), SNMP, RealPort, SSL/TLS, TCP/UDP
• TCP/UDP forwarding characteristics
- Bytes, idle time, data pattern
• User-configurable TCP/UDP Socket ID Ethernet
• Data pattern event notification via email/SNMP traps
Wi-Fi
• Intelligent SNMP device management Access
• Strong SSL/TLS based encryption Point Digi Con
Connect
onne
nect
c ® Wi-SP
- DES (56-bit), 3DES (168-bit), AES (128/256-bit)
• Digi’s patented RealPort® with encryption and authentication
for COM or TTY port control and management
• 5-year warranty

Wireless Retail Seriall


Digi Connect Wi-SP - Front Digi Connect Wi-SP - Back System Integration 0.
00

,37A-.11A
9 to 30VDC

Link Act POWER


Deli Scale

LEDs
DB-9M Antenna Power
Serial Connector (SMA)

Part Numbers North America International


Model
Digi Connect Wi-SP (single-unit pack w/power supply and dipole antenna) DC-WSP-01-S DC-WSP-01-S-W
Digi Connect Wi-SP (25-unit pack w/power supplies and dipole antennas) DC-WSP-01-S-25 DC-WSP-01-S-W-25

30 www.digi.com/digiconnectwisp
Digi Connect® N2S-170 :: Ethernet Network Controller
Overview :: Built on leading Digi embedded device + +
server technology, the Digi Connect N2S-170 card is
an intelligent and highly integrated Ethernet network
controller solution for Model 170 traffic signal
controller equipment. It delivers reliable network
connectivity for Model 170 equipment in a Model
400 modem card-compatible from factor.

+ +
+ Features + Specifications
• Designed for Model 170 traffic signal controller equipment Hardware
• Form factor compatible with Model 400 modem cards • Form factor compatible with Model 400 modem cards
• Seamless network-to-serial conversion • 32-bit NS7520 NET+ARM processor
• 10/100 Mbit Ethernet network interface • 4 MB Flash / 8 MB SDRAM
• Easy configuration through web interface • 10/100 Mbit Ethernet interface
• Serial interface supports data rates from 300 bps up to • High-speed serial interface
230 kbps • Robust on-board TCP/IP stack
• Digi’s patented RealPort® COM port redirector for • Universal IP address assignment
Microsoft Windows, UNIX and Linux environments - Static IP, DHCP, Auto-IP
• Strong NIST-certified data encryption • Secure web user interface (HTTP/HTTPS) with context
• Industrial operating temperature range sensitive online help
-40° C to 85° C (-40° F to 185° F) • Telnet command line interface
• Lead-free and RoHS compliant design • Pre-defined and custom device profiles
• UL/UR safety mark • Modem emulation and port logging
• 5-year warranty • Network service/port control (port block)
- HTTP
- Telnet
Traffic
Control Traffic Management - RealPort
Center - SSL/TLS
- TCP/UDP
Ethernet - Other
• TCP/UDP forwarding characteristics
- Bytes, idle time, data pattern
85˚ C • User-configurable TCP/UDP
Digi
Di gi Co
Connect
onn ® N2S-170 • Socket ID
--40˚
40˚ C • Data pattern event notification via email/SNMP traps
• Intelligent SNMP device management capabilities
• Strong SSL/TLS base encryption
- DES (56-bit)
- 3DES (168-bit)
- AES (128/256-bit)

Traffic Controller Network Interface


• Standard: IEEE 802.3
• Physical layer: 10 Base-T
• Data rate: 10/100 Mbps (auto-sensing)
• Mode: Full or half duplex (auto-sensing)

Part Numbers Worldwide


Model
Digi Connect N2S-170 Card (single-pack) DC-N2S-170-S
Digi Connect N2S-170 Card (10-unit bulk pack) DC-N2S-170-S-10

www.digi.com/digiconnectn2s 31
Digi One® IAP :: Industrial Serial Servers

+ + Overview :: Digi One IAP is a serial server and


industrial protocol bridge rolled into one. It delivers
all the features and functionality of the Digi One IA
plus industrial protocol bridging and multi-master
support. Digi One IAP can bridge any two industrial
serial devices provided they speak one of the
supported serial (Modbus, DF1, ASCII) or Ethernet
(Modbus/TCP, AB/Ethernet, EtherNet/IP) protocols.
Multi-master capability allows multiple masters to
simultaneously communicate with a single slave.

+ +
+ Features + Specifications
• TCP/UDP and Digi’s patented RealPort COM/TTY redirector • 10/100Base-T Ethernet support
for remote COM port access – any serial protocol can be • Switch selectable RS-232/422/485 RJ-45 serial (Port 1)
moved from device over the network to a PC • DB-9M and screw terminal block serial port
• Multi-master/multi-protocol concurrent support for - Can be enabled as second direct RS-232 port
Allen-Bradley and Modbus protocols connection to device on screw terminal
• Serial and Ethernet protocol bridging support for • Baud rates up to 230 Kbps
Allen-Bradley and Modbus protocols promotes • Protocol bridge support
interoperability - Ethernet protocols: Modbus/TCP, EtherNet/IP,
• ASCII to protocol translation for Allen-Bradley and Allen-Bradley Ethernet
Modbus - Serial protocols: ASCII, DF1, Modbus RTU/ASCII
• Integrated DIN rail mounting • Multi-master support for above plus Omron serial
• RS-232/422/485 switch selectable including DB-9 and screw and user-defined protocols
terminal connectors for added flexibility • SSL/TLS for encryption and authentication
• Galvanically isolated (from earth ground) • TCP/UDP Socket Services
• Class 1, Division 2 rated • Support for 64 concurrent socket connections
• Tunable for low latency or optimized throughput • Web-based browser configuration
• NIST FIPS-197 certified (secure AES) • Patented RealPort technology
• 5-year warranty • RFC 2217 support
• SNMP (read/write)
• PPP
• DHCP/RARP, ARP-Ping, Static IP for IP address
assignment
HMI System • Digi Port Authority – Remote management diagnostics
PLC and auto-discovery tool
• 35 mm DIN rail mounting
Etherne
Ethernet
• 9-30VDC input
Industrial • 12 diagnostic LEDs
Automation • Tunable latency
DIG

Digi One® IAP


D
IO
NE

Digi One IAP - Bottom


IA

Digi One IAP - Top

ate
lM
ne
Pa

RS-232/422/485
Modbus
HMI Panel
RTU Sleeve

Serial Port DB-9M


Power Input Ethernet DIP
(Screw Terminals) (Screw Terminals) Serial Switches

Part Numbers North America International


Model
Digi One IAP - 1 port 70001777 70001777

All cables and accessories: pg. 158-159.

32 www.digi.com/digioneiap
Digi One® IAP Haz :: Industrial Serial Servers (Hazardous)
Overview :: The Digi One IAP Haz provides a + +
means of connectivity and interoperability for serial
and Industrial Ethernet devices such as Programmable
Logic Controllers (PLCs), motors, drives, bar-code
readers displays and other types of devices deployed
in harsh environments where exposure to extreme
temperatures and volatile liquids and gases is
common. Applications for the Digi One IAP Haz
will be found in many manufacturing environments,
power or natural resource distribution and water/
wastewater management.
+ +
+ Features + Specifications
• Hardened design with extended operating temperature • 10/100Base-T Ethernet support
-35° C to 74° C (-31° F to 165° F) • Switch selectable RS-232/422/485 RJ-45 serial (Port 1)
• Conformal coated circuit board • DB-9M and screw terminal block serial port
• Class 1, Division 2 rated - Can be enabled as second direct RS-232 port
• TCP/UDP and Digi’s patented RealPort COM/TTY redirector connection to device on screw terminal
for remote COM port access – any serial protocol can be • Baud rates up to 230 Kbps
moved from device over the network to a PC • Protocol bridge support
• Multi-master/multi-protocol concurrent support for - Ethernet protocols: Modbus/TCP, Ethernet/IP,
Allen-Bradley and Modbus protocols Allen-Bradley Ethernet
• Serial and Ethernet protocol bridging support for - Serial protocols: ASCII, DF1, Modbus RTU/ASCII
Allen-Bradley and Modbus protocols promotes • Multi-master support for above plus Omron serial
interoperability and user-defined protocols
• ASCII to protocol translation for Allen-Bradley and • SSL/TLS for encryption and authentication
Modbus • TCP/UDP Socket Services
• Integrated DIN rail mounting • Support for 64 concurrent socket connections
• RS-232/422/485 switch selectable including DB-9 and screw • Web-based browser configuration
terminal connectors for added flexibility • Patented RealPort technology
• Second serial port can be used as a pass-through port • RFC 2217 support
• Galvanically isolated (from earth ground) • SNMP (read/write)
• Tunable for low latency or optimized throughput • PPP
• NIST FIPS-197 certified (secure AES) • DHCP/RARP, ARP-Ping, Static IP for IP address
• 5-year warranty assignment
SCADA
• Digi Port Authority – Remote management diagnostics
and auto-discovery tool
Ethernet Private IP • 35 mm DIN rail mounting
• 9-30VDC input
Broadband • 12 diagnostic LEDs
(e.g., DSL, other)
Remote Pipeline Monitoring Station • Tunable latency

Digi One IAP Haz - Top Digi One IAP Haz - Bottom
Digi One® IAP Haz
D

ate
lM
ne
Pa

Serial
Serial Port DB-9M
RTU Power Input Ethernet DIP
HMI Panel (Screw Terminals) Serial Switches
(Screw Terminals)

Part Numbers North America International


Model
Digi One IAP Haz 70002326 70002326
12VDC, 100-240VAC Extended Temperature Power Supply (no plug) 76000736 76000736

All cables and accessories: pg. 158-159.

www.digi.com/digioneiaphaz 33
Digi One® IA :: Industrial Serial Servers

+ + Overview :: Digi One IA adds serial-to-Ethernet


and Modbus-to-Modbus/TCP network connectivity
to virtually any industrial device with a serial port in
minutes. Designed to meet the specific requirements
of the industrial automation market, it offers an
easy way to network-enable previously isolated
RS-232/422/485 serial devices such as Programmable
Logic Controllers (PLCs), Remote Terminal Units
(RTUs), process and quality equipment, motors,
drives, bar-code readers and operator displays.

+ +
+ Features + Specifications
• Easily Ethernet-enable any industrial serial device • 10/100Base-T Ethernet support
• Modbus serial to Modbus/TCP protocol conversion • 1 serial port (DB-9 and screw terminal connectors)
• Supports serial master and serial slave modes • Switch selectable RS-232/422/485
• Supports up to 10 Modbus masters • 9-30VDC input with screw terminal block power jack
• Industrial DIN rail mounting for use in space- • Patented RealPort technology
prohibitive control cabinets • TCP/UDP Socket Services
• RS-232/422/485 switch selectable including DB-9 and • UDP
screw terminal connectors for added flexibility • Telnet, Reverse Telnet and extended Telnet
• Digi’s patented RealPort® redirector for COM or TTY • HTTP browser configurable
port control and management • DHCP/RARP, APR-Ping for IP addressing assignment
• TCP/UDP Socket Services for broad device connectivity • Flash upgradeable firmware
and application use • Baud rates up to 230 Kbps
• Galvanically isolated (from earth ground) • Full modem and hardware flow control
• Class 1, Division 2 rated • 35 mm DIN rail mounting
• Tunable for low latency or optimized throughput • LED status for serial signals, power, Ethernet and
• Easy configuration though web browser interface (HTTP) diagnostics
• 5-year warranty • RFC 2217 support

Digi One IA - Top

Industrial Automation

Power Input Ethernet Reset


HMI System (Screw Terminals) Button

Ethernet

Digi One IA - Bottom

DIG
IO
NE
IA Digi One® IA

Serial Port DB-9M DIP


RS-232/422/485 (Screw Terminals) Serial Switches

Modbus PLC

Part Numbers North America International


Model
Digi One IA – 1 port 70001862 70001862

34 www.digi.com/digioneia
Digi One® SP IA :: Industrial Serial Servers
Overview :: Digi One SP IA allows any industrial + +
device with a serial port to be easily connected to
Ethernet. The compact serial server is designed
for entry level RS-232/422/485 serial-to-Ethernet
connectivity for industrial automation applications
and includes all DIN rail mounting hardware.

+ +
+ Features + Specifications
• DIN rail and wall mount kits for flexible mounting options • 10/100Base-T Ethernet support
• 9-30VDC power with bare-wire “pigtail” for direct connection • 1 serial port (DB-9M)
included • Switch selectable RS-232/422/485
• Easy configuration using installation CD • Baud rates up to 230 Kbps
• Compact form factor – only 3.70 in (9.04 cm) in length • DIN rail and wall mount kit included
• Digi’s Patented RealPort® redirector for COM or TTY • Full modem and hardware flow control
port control and management • Modem emulation
• TCP/UDP Socket Services for broad device connectivity • TCP/UDP Socket Services
and application use • Telnet and Reverse Telnet
• Auto-connect the serial device to a networked server • DHCP/RARP/ARP-Ping for IP address assignment
using raw, Telnet, Rlogin • HTTP configuration
• Reverse Telnet for easy access of serial devices • Patented RealPort technology
from network • LED status for link and power
• Easy configuration through web interface (HTTP)
• Switch selectable RS-232/422/485 serial interface supports
any type of serial device
• Modem emulation allows support for devices designed
only for modem communications
• 5-year warranty Digi One SP IA - Front

Handheld
Scanner
Industrial Device Connectivity
DB-9M Serial
RS-232/422/485

Digi One® SP IA Digi One SP IA - Back


Ethernet

HMI

Ethernet Power

Part Numbers North America International


Model
Digi One SP IA – 1 port 70001999 70002000

All cables and accessories: pg. 158-159.

www.digi.com/digionespia 35
PortServer® TS 8/16 Family :: Standard Serial Servers

+ + Overview :: The PortServer TS 8/16 family delivers


simple, reliable and cost-effective RS-232/422/485
serial-to-Ethernet connectivity with a robust feature
set for efficient device management. It is ideal for
a wide range of applications including property
management, retail/POS, inventory and logistics
management, and industrial automation. The
PortServer TS 8/16 family also offers additional value
for secure console access applications that do not
require the high-end features of the Digi Passport or
Digi CM.
+ +
+ Features + Specifications
• Cost-effective serial-to-network connectivity • 10/100Base-T Ethernet support
• SSHv2 ensures encrypted connections • 8 or 16 serial ports (RJ-45)
• Digi’s patented RealPort® with encryption and authentication • RS-232 and switch selectable RS-232/422/485 models
for COM or TTY port control and management • Baud rates up to 230 Kbps
• Ports may be shared between multiple hosts running • TCP/UDP/Telnet Socket Services
different operating systems • Patented RealPort with encryption and authentication
• Supports SNMP for easy network management • RFC 2217 support
• Supports RADIUS authentication and accounting • 48VDC power option (RS-232 models only)
• Tunable for low latency or optimized throughput • Modem emulation
• 5-year warranty • SNMP (read/write)
• PPP
Server
• SSHv2, SSL/TLS
Hospitality • Port buffering
Back Office
• Modbus to Modbus/TCP conversion
Ethernet • HTTP
• Digi Port Authority – Remote management diagnostics
PortServer ® TS 16
and auto-discovery tool
• DHCP/RARP/ARP-Ping for IP address assignment
RS-232

S
P

PortServer TS 16 is
PortServer TS 16 - Front internally powered

PortServerTS/16

Receipt PWR U 10/100 ACT COL

Printer
PBX
Credit Card Magnetic Front Desk Power LEDs Ethernet RJ-45 Serial
Reader Key Card Switch
Maker
PortServer TS 8 - Front PortServer TS 8 - Back

PortServer TS 8
12V DC
1.0 AMP
PWR U 10/100 ACT COL

LEDs Ethernet

RJ-45 Serial Power

Part Numbers North America International


Model
PortServer TS 8 - RS-232 70001734 70001741
PortServer TS 8 MEI - RS-232/422/485, 19” rack mountable 70001979 70001981
PortServer TS 8, 48VDC - RS-232, DC power 70001885 70001885
PortServer TS 16 - RS-232 70001733 70001738
PortServer TS 16 MEI - RS-232/422/485, 19” rack mountable 70001978 70001980
PortServer TS 16 Rack - RS-232, 19” rack mountable 70001742 70001743
PortServer TS 16 Rack, 48VDC - RS-232, DC power, 19”/23” rack mountable 70001747 70001747
PortServer TS 16 Enterprise Rack - RS-232, 19” rack mountable 70001928 70001929

Cables and accessories: pg. 158-159.
See www.digi.com for additional cable converters.

36 www.digi.com/portserverts816
EtherLite® :: Standard Terminal Servers
Overview :: The EtherLite family blends the + +
control and performance of asynchronous serial
communications with the convenience of an Ethernet
connection. Available in two- to 32-port versions,
the traffic from all serial ports is serviced by a single
TCP/IP session. EtherLite requires a connection to
a computer with a Digi-supported operating system
and offers network efficiency at a low price per port.
It is ideal for retail/POS, process control and data
collection.

+ +
+ Features + Specifications
• Choose from RS-422, RS-485 and RS-232/422 switch • 2, 8, 16 or 32 asynchronous serial ports
selectable models for added flexibility • 2-port RS-422 or RS-485 serial
• Multiplexes all serial ports into a single TCP/IP session, • 16-port switch selectable RS-232/422 serial
minimizing Ethernet traffic • Up to 115 Kbps on all ports simultaneously
• Digi’s patented RealPort® with encryption and authentication • Auto-detection of either 10 Mbps or 100 Mbps Ethernet
drivers for UNIX, Linux and Windows (EtherLite 80, 160 and 162 models)
• Delivers real serial ports, without Telnet, Rlogin, Reverse • BOOTP or Static IP support
Telnet or other complex networking overhead • Full RAS support for Windows 2000, Windows XP,
• 5-year warranty Windows Server 2003
• 1U rack-mountable 32-port model
RealPort®
EtherLite 32 - Front
Server
Retail/POS

Back Office LED


Ethernet Ethernet

RJ-45 RJ-45
Serial Serial

EtherLite 32 - Back

EtherLite®
E
Et

Receipt
Printer
Power

Credit Card Input

RS-232 Reader
EtherLite 160 - Front

Alpha-Numeric
Bar-Code Cash Register
Scanner

Check-out Ethernet
LEDs
RJ-45 RJ-45
Serial Serial

EtherLite 80 - Front EtherLite 80 - Back EtherLite 160 - Back

Power Power
Ethernet LEDs Input Input
RJ-45
Serial

Part Numbers North America International


Model
EtherLite 2 - 2 ports, RS-232, RJ-45 70001430 70001531
EtherLite 2 - 2 ports, RS-422, RJ-45 70001432 70001532
EtherLite 2 - 2 ports, RS-485, RJ-45 70001683 70001706
EtherLite 160 - 16 ports, RS-232, RJ-45 70001427 70001528
EtherLite 160 - 16 ports, RS-232, 48VDC, RJ-45 70001877 70001877
EtherLite 162 - 16 ports, RS-232/422, RJ-45 70001428 70001529
EtherLite 32 – 32 ports, RS-232, RJ-45 70001429 70001533
EtherLite 80 – 8 ports, RS-232, RJ-45 70001767 70001768

All cables and accessories: pg. 164.

www.digi.com/etherlite 37
Digi Connect® ES :: Serial Server (Extended Electrical Safety)

+ + Overview :: Digi Connect ES is the first IEC


60601/EN60601 compliant device of its kind. It has
four, eight or 16 galvanic isolated RS-232 serial ports,
with a 10/100 Mbps network interface and optional
Ethernet switch (eight-, 16-port models). It may be
used to provide Ethernet connections from serial
devices such as ventilators, EKGs, patient monitoring
systems, infusion pumps and glucose meters to a
central data management system.

+ +
+ Features + Specifications
• 4-, 8- or 16-port RS-232 serial-to-network connectivity • 4, 8 or 16 isolated RS-232 serial ports (2.5 kV)
• IEC 60601 compliant • RJ-45 serial connectors
• Galvanic isolation on all ports • Isolated Ethernet ports (1.5 kV)
- Ensures there is no electrical path from port to port • Connects to 10/100 Mbps Ethernet LAN
- Prevents a ground fault from affecting the operation of • Optional 3-port Ethernet switch on 8- and 16-port models
the Digi Connect ES or any device connected to it • DHCP, RARP and ARP-Ping for easy IP address assignment
• Wall mountable • HTTP for easy browser configuration
• Digi’s patented RealPort® technology provides local serial • Telnet, Reverse Telnet, Rlogin and auto-connect
port functionality; encryption and authentication available • Up to 9 Telnet or Rlogin sessions per port
for SSL-based protection for additional security • TCP and UDP Socket support
• Supports SNMP for easy network management • Password access
• Line Printer Daemon (LPD)
Data • SNMP
Management Medical • HTTPS, SSL/TLS
System • Digi Port Authority-Remote for easy monitoring
Ethernet • Easy firmware upgrades via TFTP
• Surge protection on all ports
Digi Connect® ES • 230 Kbps throughput on all ports
• Full modem and hardware flow control
nf
IInfusion Pump • LEDs for serial and Ethernet activity
• White metal enclosure
KG
EKG
EK RS
RS-23
RS-232
98.74˙

• SSHv2 feature available on all ports simultaneously


98.74˙

Ventilator
Sphygmomanometer

Digi Connect ES - Front Digi Connect ES – Back

Power Power RJ-45 RJ-45


Switch Input Serial Serial

Part Numbers North America International


Model
Digi Connect ES 4 - 4 ports DC-ES-4 DC-ES-4-EU
Digi Connect ES 8 - 8 ports DC-ES-8 DC-ES-8-EU
Digi Connect ES 8 with Ethernet Switch - 8 ports DC-ES-8-SW DC-ES-8-SW-EU
Digi Connect ES 16 - 16 ports DC-ES-16 DC-ES-16-EU
Digi Connect ES 16 with Ethernet Switch - 16 ports DC-ES-16-SW DC-ES-16-SW-EU
Digi Connect ES VESA Mounting Bracket DC-ES-BKT DC-ES-BKT

All cables and accessories: pg. 159.

38 www.digi.com/digiconnectes
RealPort® :: Management Tools/Special Features
Server
RealPort Overview :: Digi’s patented RealPort software
Software allows companies to easily network-enable serial
RealPort® Solution devices without spending valuable time and money
to re-write existing application programs. Many of
Serial Device Data
Ethernet
today’s key business applications were written to talk
to serial devices that are directly connected to servers;
however, these devices are often located far away
PortServer® TS
from servers or PCs.
Data 4

RealPort software leverages the TCP/IP network

A
PD
II
S
P

Data 3
Data 1 Data 2 PDA infrastructure to provide a virtual connection to
serial devices. The software is installed directly on
Bar-code
the server and allows applications to talk to devices
Scanner across a network as though the devices were directly
Printer
Credit Card
• Traffic from multiple
attached to the server. In actuality, the devices are
Reader
serial devices share connected to a Digi external serial server somewhere
the same connection
on the network.
Other COM Redirector RealPort software is unique among COM port
Server Other COM Redirector redirectors. It is the only implementation that allows
multiple connections to multiple ports over a single
TCP/IP connection. This means RealPort supports the
maximum number of remote devices – the number
Serial Device Data
is restricted only by the operating system and server
Ethernet
processing power. Other implementations on the
market require a separate TCP/IP connection for each
serial port, resulting in higher network overhead and
Data 4 more processing demands on the server.
Brand X
A
PD

Data 3
RealPort is a standard feature of all Digi external
Data 1 Data 2 PDA
serial servers. OS support includes Microsoft
Windows Server 2003, Vista, XP, 2000, NT, 98, Me;
Bar-code
Scanner
SCO Open Server and UnixWare; Linux; AIX; True
Credit Card * Four times the overhead
64; Sun Solaris SPARC and Intel; HP-UX; and NCR
Printer
Reader * Four times the proceeding on host UNIX MP-RAS.

RealPort® with Encryption :: Management Tools/Special Features


Overview :: Digi takes RealPort technology a RealPort® with
step further with patent-pending RealPort with Encryption Solution RealPort with
Encryption
Encryption, offering a secure Ethernet connection
between the COM or TTY port and a serial server. [4821 5008 9101 1121] Server
Encryption prevents internal and external snooping of Ethernet

data across the network by encapsulating the TCP/IP


packets in a Secure Sockets Layer (SSL) connection
[¢§ %^&# %*? ¢§*?]
and encrypting the data using Advanced Encryption
Standard (AES), one of the latest, most efficient
security algorithms. Ethernet

PortServer
P
Po rtS
rt ®
TS
RealPort with Encryption is available on all
PortServer TS and Digi Connect models as well as Credit Card
Digi One IAP. Other models run standard RealPort. P S
II Reader

[4821 5008 9101 1121]

www.digi.com/literature 39

You might also like