Parts and Controls Listening to Music/Sound Adjusting the Sound

Rear
What’s in the Box Listening to a TV Listening to Music on a USB Listening to Music from a Mobile Enjoying the Sound Effect that is
• Bar speaker (1) You can listen to TV sound on the system. Device Device with the BLUETOOTH Tailored to Sound Sources
You can play music files stored on a connected Function (Sound Mode)
USB device.

Home Theatre System

You can listen to music stored on a mobile device You can easily enjoy pre-programmed sound
Notes such as a smartphone or tablet via a wireless effects that are tailored to different kinds of sound
• To view the USB content list on the TV screen, make sure connection by connecting the system and the sources.
you connect the system to the TV using an HDMI cable.
mobile device with the BLUETOOTH function.
Operating Instructions • Subwoofer (1) • Change the input of the TV to the input to which the system
is connected. When connecting to the mobile device with the
BLUETOOTH function, you can operate by simply
using the supplied remote control without turning
the TV on. STANDARD
AUTO SOUND
MUSIC
CINEMA

• Surround speaker (2) When Connecting to a TV with an

HDMI Cable (ARC) or Optical Digital
Cable

• Remote control (1)/ Press AUTO SOUND, CINEMA, MUSIC, or

INPUT
R03 (size AAA) battery (2) Listening to Music on a Connected USB STANDARD to select the sound mode.
Device The selected sound mode appears in the front
 ANALOG IN jack panel display.
 HDMI OUT (TV (ARC)) jack Pairing with a Mobile Device
Connect a TV that has an HDMI input jack with Front panel Explanation
an HDMI cable. The system is compatible with INPUT display
Audio Return Channel (ARC). ARC is the [AUTO SOUND] You can enjoy the sound with
• AC power cord (mains lead) (2) function that sends TV sound to an AV device  +/– Sony-recommended sound
(supplied for Middle East and Africa models) such as the system from the TV’s HDMI jack. mode. The sound mode is
 TV IN (OPTICAL) jack automatically optimized
 SPEAKERS jacks according to playback content
SW  +/– and function.
 AC inlet
[STANDARD] Sound effects are optimized
 +/– for the individual source.
Remote Control
• AC power cord (mains lead) (1)  +/– [CINEMA] Sounds are played back with
(supplied for other countries/regions) surround effects, and they are
1 Press INPUT repeatedly to select [TV] in the realistic and powerful, making
front panel display. SW  +/–
them suitable for movies.
2 Adjust the volume. SW  +/– [MUSIC] Sound effects are optimized
MENU
• Stereo Mini cable (1) • Adjust the volume by pressing +/– on the for listening to music.
(supplied for India models only) remote control. /
• Adjust the subwoofer volume by pressing SW ENTER
 +/– on the remote control.
5-010-727-11 (1)  Making Dialogs Clearer (VOICE)
Notes
• When you connect the TV to both the HDMI OUT (TV (ARC)) /  You can make dialogs clearer by setting the voice
and TV IN (OPTICAL) jacks, the jack for audio input is mode.
• Optical digital cable (1)
selected depending on which audio signal is input first. /
(supplied for models other than India models) • When the input source does not contain much bass sound,
HT-S20R 1 Connect the USB device to the (USB) port.
such as in TV programs, the bass sound from the subwoofer
may be difficult to hear. 1 Press and hold the BLUETOOTH button on the
Tip subwoofer for 2 seconds.
You can also select the input by pressing on the The system enters the pairing mode and the
About These Operating Instructions subwoofer.
BLUETOOTH indicator flashes twice repeatedly.

• WALL MOUNT TEMPLATE (1)

When Connecting to a TV with a Stereo
• The instructions in these Operating Instructions describe the controls on the remote control. BLUETOOTH
• Some illustrations are presented as conceptual drawings, and may be different from the actual products. (not supplied for some countries/regions) Mini Cable button VOICE
• The default settings are underlined on each feature description.
• Characters in brackets [ ] appear in the front panel display or on the TV screen.
INPUT
2 Press INPUT repeatedly to select [USB] in the
front panel display.
Installation and Connection [READ] appears in the front panel display and BLUETOOTH indicator
Press VOICE to set the function to on or off.

the system starts reading data of the USB

Front panel Explanation
• Startup Guide device. When the reading of data is completed, 2 On the mobile device, search for the system display
 INPUT the USB content list appears on the TV screen. by performing the pairing operation.
4 Remove WALL MOUNT TEMPLATE. [Vo.ON] The sound of voice is
Connecting a TV with an HDMI Selects the input source.
Each time you press INPUT, the input source  +/–
3 Press / to select the content you want, then The list of the BLUETOOTH devices that are emphasized.
5 Hang the bar speaker on the screws. press ENTER. searched appears on the screen of the mobile
Cable and/or Optical Cable Align the holes on the rear of the bar speaker
changes cyclically as follows.
The selected content starts playing. device.
[Vo.OFF] Off.
[TV]  [ANALOG]  [BT]  [USB] For the operation method to pair the
Refer to Startup Guide (separate document). with the screws, then hang the bar speaker on
 AUTO SOUND 4 Adjust the volume. BLUETOOTH device to the mobile device, refer
the two screws. SW  +/– • Adjust the volume by pressing +/– on the
Selects AUTO SOUND for the sound mode.
 CINEMA remote control.
to the operating instructions of the mobile
device.
Enjoying Clear Sound with Low
Mounting the Bar Speaker and • Operating Instructions (this document) Selects CINEMA for the sound mode. • Adjust the subwoofer volume by pressing SW 3 Pair the system and mobile device by Volume at Midnight (NIGHT)
 +/– on the remote control.
Surround Speakers on a Wall  VOICE selecting “HT-S20R” from the list on the screen You can compress sound in accordance with the
Turns on/off the voice mode. Note of the mobile device.
You can mount the bar speaker and surround 1 Press INPUT repeatedly to select [ANALOG] in information contained in the content by setting
When the input source does not contain much bass sound, If a passkey is requested, enter “0000.”
speakers on a wall.   (volume) +*/– the front panel display. such as in TV programs, the bass sound from the subwoofer the night mode to on. Sound is output at low
Adjusts the volume. may be difficult to hear. 4 Make sure that the BLUETOOTH indicator on volume with minimum loss of fidelity and clarity
2 Adjust the volume. the subwoofer lights in blue. of dialog.
 SW  (subwoofer volume) +/–
• Adjust the volume by pressing +/– on the To select the play mode
Adjusts the subwoofer volume. A connection between the system and mobile
remote control. You can select the play mode for USB playback,
 MENU such as repeat play or random play, from the device has been established.
• Adjust the subwoofer volume by pressing SW
Turns on/off the menu in the front panel  +/– on the remote control. menu. 5 Start audio playback with the music app on
Note display. the connected mobile device.
1 Press MENU.
When sticking WALL MOUNT TEMPLATE, smooth it out fully.
Guide to Parts and Controls / Note
When the input source does not contain much bass sound, The menu item appears in the front panel
Sound is output from the system.
Selects the menu items.
Mounting the Surround Speakers on a Details are omitted from the illustrations. Selects the content on the TV screen for USB
such as in TV programs, the bass sound from the subwoofer
may be difficult to hear.
display. 6 Adjust the volume.
Notes
Wall playback. 2 Select [USB] – [REPEAT] by using //ENTER. • Adjust the volume by pressing  +/– on the
• Prepare screws (not supplied) that are suitable for the wall Tip NIGHT
Subwoofer remote control.
material and strength. As a plasterboard wall is especially 1 Prepare a screw (not supplied) for each ENTER You can also select the input by pressing on the 3 Select the play mode by using //ENTER.
fragile, attach the screws securely in the wall beam. Install subwoofer. • Adjust the subwoofer volume by pressing SW
speaker that is suitable for the wall mount Enters the selection.
the speakers horizontally, hung by screws in studs in a Front • [OFF]: Repeats off. Plays back all tracks.  +/– on the remote control.
hole on the rear of the surround speaker. Plays the content that is selected by / for
continuous flat section of the wall. • [ONE]: Repeats one track. •  and / on the remote control
• Have the installation done by a Sony dealer or licensed USB playback.
• [FOLDER]: Repeats all tracks in a current can be used for the BLUETOOTH function.
contractor and pay special attention to safety during the 4 mm BACK (Searching backward or forward by holding
installation. folder.
Returns to the previous display. down / does not work.) Press NIGHT to set the function to on or off.
• Sony shall not be held responsible for accidents or damage • [RANDOM]: Repeats all tracks in a current
caused by improper installation, insufficient wall strength, Stops USB playback.
More than 30 mm folder in random order. Notes
improper screw installation or natural disaster, etc.  / (previous/next) • You can pair up to 10 BLUETOOTH devices. If an 11th
• [ALL]: Repeats all tracks. Front panel Explanation
Selects the previous/next track or file. BLUETOOTH device is paired, the oldest connected device
4.5 mm 4 Press MENU to turn off the menu. display
Mounting the Bar Speaker on a Wall Hold down to search backward or forward for will be replaced by the new one.
• Perform pairing for the second and subsequent mobile
USB playback. [N.ON] The sound is compressed in
1 Prepare two screws (not supplied) that are Other operations devices.
accordance with the
suitable for the wall mount holes on the rear 10 mm   (power) • When the input source does not contain much bass sound,
To Do this information contained in the
of the bar speaker. Turns on the system or sets it to standby such as in TV programs, the bass sound from the subwoofer
may be difficult to hear. content.
mode. Pause or resume Press .
Hole on the rear of [N.OFF] Off.
4 mm the surround speaker  STANDARD playback Tips
Selects STANDARD for the sound mode. • You can check the connection status of the BLUETOOTH
Select the previous or Press /. function by checking the BLUETOOTH indicator status. Note
 MUSIC next track When you turn the system off, the night mode is set to off
More than 30 mm 2 Fasten the screw into the wall. • While the BLUETOOTH input is being selected, the system
automatically.
Selects MUSIC for the sound mode. Search backward or Press and hold enters the pairing mode by pressing the BLUETOOTH
The screw should protrude as in the illustration. button on the subwoofer shortly.
 NIGHT forward (rewind/fast /.
4.5 mm forward)
Turns on/off the night mode.
  (muting)
Listening to Music of the Paired Checking the Current Sound
Notes Mobile Device
10 mm Mutes the sound temporarily.
Pressing the button while muting cancels
• Do not remove the USB device during operation. To avoid
data corruption or damage to the USB device, turn the
Settings
Hole on the rear of 6 mm to   (power) button muting. system off before connecting or removing the USB device. You can check the settings of the sound, night,
7 mm Turns on the system or sets it to standby • [INVALID USB] appears in the front panel display if you and voice modes and current stream information.
the bar speaker  DIMMER connect an unsupported or broken USB device.
mode. Adjusts the brightness of the front panel • Depending on the file format, rewind and fast forward may
INPUT

2 Stick WALL MOUNT TEMPLATE on a wall.  (input select) button display and BLUETOOTH indicator. not work.
 BLUETOOTH button Each time you press DIMMER, the brightness
Center of the TV
3 Hang the surround speaker on the screw.  +/– (volume) buttons
setting changes cyclically as follows. Information of USB Device on the TV
[BRIGHT]  [DARK]  [OFF]
Align the hole on the rear of the surround  BLUETOOTH indicator Screen
speaker with the screw, then hang the —— Lights in blue: BLUETOOTH connection has The front panel display and BLUETOOTH
surround speaker on the screw. been established. indicator light up in the following statuses
even if you set the brightness setting to [OFF].  +/–
—— Flashes slowly in blue repeatedly:
BLUETOOTH connection is being attempted. —— When operating the system
—— For 10 seconds after you stop operating the
—— Flashes twice in blue repeatedly: During
system
pairing standby status.  Playing time
—— When displaying the system status, such as SW  +/–
Adhesive tape, etc. WALL MOUNT  Front panel display mute, Auto Standby, etc.  Total playing time
TEMPLATE  (USB) port   (play/pause)*  Bit rate
 Remote control sensor Plays, pauses, or resumes playback.  Playback status
1 Align TV CENTER LINE () of WALL MOUNT Point the remote control at the remote control * The  + and  buttons have a tactile dot. Use it as a
TEMPLATE with the center line of your TV. sensor to operate the system. guide during operation.
 Rewind/fast forward speed MENU
2 Align TV BOTTOM LINE () of WALL MOUNT  Play mode
About the replacement of batteries for the  /
TEMPLATE with the bottom of your TV, then  Selected file index/Total files in the folder
stick WALL MOUNT TEMPLATE on a wall by remote control / ENTER
using a commercially available adhesive tape, When the system does not respond by operating
etc. with the remote control, replace two batteries The following messages appear on the TV screen
with new batteries. depending on the status of the USB device. 1 Turn the BLUETOOTH function of the mobile
3 Fasten the screws into the marks () on Use R03 (size AAA) manganese batteries for • [File Unsupported] device to on.
SCREW LINE () of WALL MOUNT TEMPLATE Appears for 2 seconds at the bottom left side
1 Press MENU to turn on the menu in the front
replacement. 2 Press INPUT repeatedly to select [BT] or press panel display.
as in the illustration below. when an unsupported file is skipped. the BLUETOOTH button on the subwoofer
228.5 mm 228.5 mm • [Device Not Support] shortly. 2 Press / to select [CURRENT STATUS], then
—— A USB device is not supported. press ENTER.
The BLUETOOTH indicator flashes and the
—— Device inserted is a non-USB device, a bad system automatically reconnects to the 3 Press  repeatedly to select the item you
USB device, or a USB device that has no files BLUETOOTH device it was most recently want.
on it. connected to. The current setting appears in the following
• [No USB] order.
Screws No USB device is inserted. 3 Make sure that the BLUETOOTH indicator
Marks () lights in blue. Sound mode  Voice mode  Night mode 
• [Waiting] Stream Information
The system is searching the USB device. A connection between the system and mobile
device has been established. The current setting appears in the reverse order
• [This device is empty] by pressing .
There are no playable files in the USB device. 4 Start audio playback with the music app on
the connected mobile device. 4 Press MENU to turn off the menu.
Notes
• Depending on the playback source, some information may Sound is output from the system.
6 mm to not be displayed.
• Depending on the play mode, the information displayed 5 Adjust the volume.
7 mm
may differ. • Adjust the volume by pressing +/– on the
remote control.
• Adjust the subwoofer volume by pressing SW
 +/– on the remote control.
The screw should protrude as in the illustration. •  and / on the remote control
can be used for the BLUETOOTH function.
(Searching backward or forward by holding
down / does not work.)
Note
When the input source does not contain much bass sound,
such as in TV programs, the bass sound from the subwoofer
may be difficult to hear.
 Changing the Settings Using the Control for HDMI Troubleshooting Specifications WARNING
You can set the following items on the menu. Function If the system does not work properly, handle it in USB Device Connection Do not install the system in a confined space,
Your settings are retained even if you disconnect the AC power cord (mains lead).
Connecting a device such as a TV or Blu-ray Disc
the following order.
The USB device is not recognized.
Subwoofer (SA-WS20R) BLUETOOTH device make it impossible to such as a bookcase or built-in cabinet.
connect, or may result in different control
1 Press MENU to turn on the menu in the front panel display. player compatible with the Control for HDMI 1 Search for the cause and solution of the issue Amplifier section
using this troubleshooting. • Try the following: POWER OUTPUT (rated) methods, display or operation. To reduce the risk of fire, do not cover the
2 Press //ENTER repeatedly to select the item and setting you want. function* using an HDMI cable enables you to  Turn the system off. Front L + Front R: 45 W + 45 W (at 4 ohms, 1 kHz, 1% THD) • Noise may occur or the audio may cut off ventilation opening of the system with
To return to the upper layer, press BACK. easily operate the device by using a TV or Blu-ray 2 Reset the system.  Remove and reconnect the USB device. POWER OUTPUT (reference)
depending on the BLUETOOTH device newspapers, tablecloths, curtains, etc.
Front L/Front R/Surround L/Surround R/Center: 67 W (per channel
Disc player remote control. All the settings of the system return to their  Turn the system on. at 4 ohms, 1 kHz) connected with this system, the communications Do not expose the system to naked flame sources
3 Press MENU to turn off the menu. Subwoofer: 65 W (at 4 ohms, 100 Hz) environment, or surrounding conditions.
Note initial status. For details, see “Resetting the • Make sure that the USB device is securely (for example, lighted candles).
Inputs
Note These functions may work with devices other than those System.” connected to the (USB) port. TV IN (OPTICAL)
You can also turn off the menu by performing an operation other than a menu operation such as pressing  +/–, SW  +/–, , manufactured by Sony, but operation is not guaranteed. USB If you have any questions or problems concerning To reduce the risk of fire or electric shock, do not
Should any problems persist, consult your nearest • Check to see if the USB device or a cable is
etc. ANALOG IN your system, please consult your nearest Sony
* Control for HDMI is a standard used by CEC (Consumer damaged. expose this system to dripping or splashing, and
Electronics Control) for allowing HDMI (High-Definition Sony dealer. Output
dealer.
• Make sure that the USB device is on. HDMI OUT (TV (ARC)) do not place objects filled with liquids, such as
Menu List Multimedia Interface) devices to control each other.
• If the USB device is connected via a USB hub, HDMI section vases, on the system.
The default settings are underlined. They may differ depending on the area. Power disconnect it and connect the USB device Connector
Preparing to Use the Control for HDMI The system does not power up. directly to the subwoofer.
Type A (19pin)
Copyrights and Trademarks The system is not disconnected from the mains as
Items Function Function • Check that the AC power cord (mains lead) is
USB section
(USB) port:
long as it is connected to the AC outlet, even if the
Set [HDMI] – [CONTROL FOR HDMI] to [ON]. The connected securely. Mobile Device Connection Type A
This system incorporates Dolby* Digital. system itself has been turned off.
[CURRENT [AUTO SOUND]/ These items are not the setting menu items.
STATUS] default setting is [ON]. • Disconnect the AC power cord (mains lead) from BLUETOOTH section * Manufactured under license from Dolby Laboratories.
[STANDARD]/[CINEMA]/ You can check the settings of the sound, night, and voice BLUETOOTH connection cannot be As the main plug is used to disconnect the system
Enable the Control for HDMI function settings of the wall outlet (mains), and then reconnect after Communication system Dolby, Dolby Audio and the double-D symbol are
[MUSIC] modes and current stream information. completed. BLUETOOTH Specification version 5.0 trademarks of Dolby Laboratories. from the mains, connect the system to an easily
the TV and other device connected to the TV. several minutes.
[Vo. ON]/[Vo.OFF] For details about operation, see “Checking the Current Output
accessible AC outlet.
• Make sure that the BLUETOOTH indicator on the BLUETOOTH Specification Power Class 1
Sound Settings.” Tip
The system is turned off automatically. The terms HDMI, HDMI High-Definition Should you notice an abnormality in the system,
[N.ON]/[N.OFF] If you enable the Control for HDMI function when using a TV subwoofer is lit. Maximum communication range
manufactured by Sony, the Control for HDMI function of the • The auto standby function is working. Set • Make sure the BLUETOOTH device to be
Line of sight approx. 10 m1) Multimedia Interface, and the HDMI Logo are disconnect the main plug from the AC outlet
Frequency band
[NO INFO.]/[LPCM]/ system is also enabled automatically. [SYSTEM] – [AUTO STANDBY] to [OFF]. connected is turned on and the BLUETOOTH 2.4 GHz band (2.4000 GHz - 2.4835 GHz)
trademarks or registered trademarks of HDMI immediately.
[DOLBY DIGITAL] function is enabled. Modulation method Licensing Administrator, Inc.
The system does not turn on even when FHSS (Freq Hopping Spread Spectrum)
[SPEAKER] [MULTI SPEAKER] You can set the output of the speakers of the system. System Power Off Function the TV is turned on.
• Bring the BLUETOOTH device close to the Compatible BLUETOOTH profiles2)
The BLUETOOTH® word mark and logos are
Do not expose batteries or appliances with
• [ON]: The sound is output from all the speakers, regardless When you turn off the TV, the system will turn off subwoofer. A2DP (Advanced Audio Distribution Profile) battery-installed to excessive heat, such as
of the number of audio channels for the playback source. • Set [HDMI] – [CONTROL FOR HDMI] to [ON]. The AVRCP (Audio Video Remote Control Profile) registered trademarks owned by Bluetooth SIG, sunshine and fire.
automatically. • Pair this system and the BLUETOOTH device Supported Codec3)
• [OFF]: The sound is output from the speakers that TV must support the Control for HDMI function. Inc. and any use of such marks by Sony
again. You may need to cancel the pairing with SBC4)
For details, refer to the operating instructions of Transmission range (A2DP) Corporation is under license. Other trademarks Indoor use only.
correspond to the audio channel for the playback source. System Audio Control Function this system using your BLUETOOTH device first.
your TV. 20 Hz - 20,000 Hz (Sampling frequency 32 kHz, 44.1 kHz, 48 kHz) and trade names are those of their respective
[SUR.L.DISTANCE]/ [3.0M]: Adjusts the distance from the seating position to the If you turn on the system while you are watching • If [BT] – [POWER] is set to [OFF], set to [ON].
• Check the speaker settings of the TV. The system The actual range will vary depending on factors such as obstacles
Do not place this product close to
1)

between devices, magnetic fields around a microwave oven,

owners.
[SUR.R.DISTANCE] surround speaker (left or right) from 1.0 meter to 6.0 meters the TV, the TV sound will be output from the power syncs with the speaker settings of the TV. Pairing cannot be achieved.
(0.1 meter intervals).
static electricity, cordless phone use, reception sensitivity, the medical devices
speakers of the system. The volume of the system For details, refer to the operating instructions of • Bring the BLUETOOTH device close to the operating system, software applications, etc. “BRAVIA” logo is a trademark of Sony Corporation. This product (including accessories) has
[SUR.L.LEVEL]/ [0.0]: Adjusts the sound level of the surround speaker (left can be adjusted using the TV remote control. If your TV. subwoofer.
2)
BLUETOOTH standard profiles indicate the purpose of BLUETOOTH
communication between devices. magnet(s) which may interfere with pacemakers,
[SUR.R.LEVEL] or right) from –6.0 dB to +6.0 dB (0.5 dB intervals). the TV sound was output from the speakers of the • Depending on the TV, if the sound was output • Make sure this system is not receiving “PlayStation” is a registered trademark or
3)
Codec: Audio signal compression and conversion format programmable shunt valves for hydrocephalus
system the previous time you watched the TV, the from the speakers of the TV the previous time, interference from a wireless LAN device, other trademark of Sony Interactive Entertainment Inc.
Note
4)
Abbreviation for Subband Codec treatment, or other medical devices. Do not place
system will be turned on automatically when you the system may not turn on by interlocking with 2.4 GHz wireless devices, or a microwave oven. If
Be sure to set [TEST TONE] to [ON] for easy adjustment. Speaker section this product close to persons who use such
turn on the TV again. the TV even when the TV is turned on. a device that generates electromagnetic Speaker system MPEG Layer-3 audio coding technology and medical devices. Consult your doctor before using
[TEST TONE] • [ON]: The test tone is output from each speaker in Operations can also be made by the TV’s menu. radiation is nearby, move the device away from Subwoofer system, Bass reflex patents licensed from Fraunhofer IIS and
The system turns off when the TV is turned Speaker this product if you use any such medical device.
sequence. For details, refer to the operating instructions of this system. Thomson.
• [OFF]: Turns off the test tone. your TV. off. 160 mm cone type

• Check the setting of the Control for HDMI

• Pairing may not be possible if other BLUETOOTH General Recommended cables
Note Notes devices are present around the system. In this Power requirements Windows Media is either a registered trademark Properly shielded and grounded cables and
function. When the Control for HDMI function is Models for Middle East and Africa:
The test tone is not output even though [TEST TONE] is set to [ON] while • Sound is only output from the TV if other than [TV] input is case, turn off the other BLUETOOTH devices. or trademark of Microsoft Corporation in the connectors must be used for connection to host
[USB] input is selected. Select an input other than [USB].
set to on and the input of the system is the TV 120 V - 240 V AC, 50 Hz/60 Hz
selected when using the Twin Picture function on the TV.
input, the system turns off automatically when Models for other countries/regions: United States and/or other countries. computers and/or peripherals.
When you disable the Twin Picture function, the sound is Sound of the connected BLUETOOTH 220 V - 240 V AC, 50 Hz/60 Hz This product is protected by certain intellectual
[AUDIO] [DRC] Useful for enjoying movies at low sound volume. DRC you turn off the TV.
output from the system. mobile device is not output from the Power consumption
property rights of Microsoft Corporation. Use or For the bar speaker and surround
(Dynamic range applies to Dolby Digital sources. • The number for the system’s volume level is displayed on On: 40 W
The system does not turn off even when system. distribution of such technology outside of this
control) • [ON]: Compresses sound according to the information in the TV screen depending on the TV. The volume number
• Make sure that the BLUETOOTH indicator on the
Standby mode: 0.5 W or less (Power Saving mode) speakers
the content. displayed on the TV may differ from the number on the the TV is turned off. (When [CONTROL FOR HDMI] in [HDMI] and [STANDBY] in [BT] are
set to [OFF])
product is prohibited without a license from The nameplates are located on the bottom of the
front panel display of the system.
• Check the setting of the Control for HDMI subwoofer is lit. Microsoft or an authorized Microsoft subsidiary.
• [OFF]: Sound is not compressed. • Depending on the settings of the TV, the System Audio
Standby mode: 2 W or less* bar speaker and surround speakers.
function. When you turn off the TV, the system • Bring the BLUETOOTH device close to the (When [CONTROL FOR HDMI] in [HDMI] and [STANDBY] in [BT] are
[A.VOL] (Auto volume) You can adjust the volume automatically depending on the Control function may not be available. For details, refer to
turns off automatically only if the input of the subwoofer. set to [ON])
All other trademarks are trademarks of their
input level from a connected device. the operating instructions of your TV. * The system will automatically enter Power saving mode when This equipment has been tested and found to
• Depending on the TV, if the TV sound was output from the system is TV input. The TV must support the • If a device that generates electromagnetic there is no HDMI connection and no BLUETOOTH pairing respective owners. comply with the limits set out in the EMC
• [ON]: Adjusts the volume automatically. speakers of the TV the previous time you watched the TV, Control for HDMI function. For details, refer to radiation, such as a wireless LAN device, other history.
• [OFF]: Off. regulation using a connection cable shorter than
the system may not turn on by interlocking with the TV the operating instructions of your TV. BLUETOOTH devices, or a microwave oven is Dimensions* (approx.) (w/h/d)
power even if the TV is turned on. 192 mm × 387 mm × 342 mm 3 meters.
[DUAL] You can enjoy multiplex broadcast sound when the system nearby, move the device away from this system.
* Not Including projection portion
(Dual mono) receives a Dolby Digital multiplex broadcast signal.
Audio Return Channel (ARC) Picture • Move the USB 3.0 device and its cable away Mass (approx.) For the customers in India
• [MAIN]: Sound of the main language will be output. from this system. 7.0 kg

• [SUB]: Sound of the sub language will be output. If the system is connected to a TV’s HDMI IN jack There is no picture or the picture is not • Remove any obstacle between this system and Disposal of old electrical
Bar Speaker (SS-S20R)
• [M/S]: Mixed sound of both the main and sub languages compatible with Audio Return Channel, you can output correctly. the BLUETOOTH device or move this system
listen to TV sound from the speakers of the away from the obstacle.
Speaker system & electronic equipment
will be output. • Select the appropriate input. Full range speaker system, Bass reflex
system without connecting an optical digital • When there is no picture while TV input is • Reposition the connected BLUETOOTH device.
Speaker (applicable in the
Note 42 mm × 100 mm cone type
cable. selected, select the TV channel that you want • Switch the wireless LAN frequency of any nearby Dimensions* (approx.) (w/h/d) European Union and
To receive a Dolby Digital signal, you need to connect a TV or other device
to the TV IN (OPTICAL) jack with an optical digital cable or the HDMI OUT Note using the TV remote control. wireless LAN router or PC to 5 GHz range. 760 mm × 52 mm × 86 mm other countries with
* Not Including projection portion
(TV (ARC)) jack with an HDMI cable. If the TV is not compatible with Audio Return Channel, an • Disconnect an HDMI cable, then connect it • Increase the volume on the connected Mass (approx.) separate collection
[HDMI] [CONTROL FOR HDMI] • [ON]: The Control for HDMI function is enabled. Devices optical digital cable needs to be connected (refer to the again. Make sure that the cable is firmly BLUETOOTH device. 2.0 kg systems)
supplied Startup Guide). inserted.
connected with an HDMI cable can operate each other. Surround Speakers (SS-SS20R)
The sound is not in sync with the image.
• [OFF]: Off. Speaker system
One-Touch Play Function Sound • When you are watching movies, you may hear Full range speaker system, Bass reflex For the customers in UAE
[TV AUDIO] You can set whether the playback sound that is input from When you play content on a device (Blu-ray Disc the sound with a slight delay from the image. Speaker
an HDMI cable or optical digital cable. player, “PlayStation®4”, etc.) connected to the TV, No TV sound is output from the system. 65 mm cone type
Dimensions* (approx.) (w/h/d)
• [AUTO]: Plays the sound that is detected from either an
HDMI cable or optical digital cable. When you connect
the system and TV are turned on automatically,
the input of the system is switched to the TV
• Check the type and connection of an HDMI
cable or optical digital cable that is connected to
Remote Control 86 mm × 171 mm × 86 mm
* Not Including projection portion
TRA
either an HDMI cable or optical digital cable, the system The remote control of this system does not Mass (approx.) REGISTERED No: ER42715/15
input, and sound is output from the speakers of the system and the TV (refer to the supplied
plays by selecting the connected cable for the TV input. function. 0.6 kg DEALER No: DA0063360/11
the system. Startup Guide).
• [OPTICAL]: Plays the sound from the TV IN (OPTICAL) jack • Disconnect the cables that are connected • Point the remote control at the remote control Design and specifications are subject to change without notice.
for the TV input. Notes sensor on the subwoofer.
between the TV and the system, then connect
• If the TV sound was output from the speakers of the TV the
[BT] [POWER] You can turn the BLUETOOTH function on or off. previous time you watched the TV, the system may not turn them firmly again. Disconnect the AC power • Remove any obstacles in the path between the
Precautions
• [ON]: Turns the BLUETOOTH function on. on and the sound and picture may be output from the TV
even if device content is played.
cords (mains leads) of the TV and the system
from the AC outlets (mains), then connect them
remote control and the subwoofer.
• Replace both batteries in the remote control
Playable Types of Files (USB
• [OFF]: Turns the BLUETOOTH function off.
Note
• Depending on the TV, the beginning part of content being
played may not play correctly.
again. with new ones, if they are weak. Input) On safety
• When the system and TV are connected with an • Make sure you are pressing the correct button
When the BLUETOOTH function is set to off, the BLUETOOTH input is
HDMI cable, check the following. • Should any solid object or liquid fall into the
skipped while selecting input by pressing INPUT. on the remote control. system, unplug the system and have it checked
—— The HDMI jack of the connected TV is labeled Codec Extension by qualified personnel before operating it any
[STANDBY] When the system has pairing information, you can turn the
system on and listen to music from a BLUETOOTH device,
Notes on HDMI Connections with “ARC.” The TV remote control does not work.
• Install the bar speaker so that it does not MP3 (MPEG-1 Audio .mp3 further.
—— The Control for HDMI function of the TV is set Layer III) • Do not touch the AC power cord (mains lead)
even when the system is in standby mode, by setting the • Use an HDMI-authorized cable. to on. obstruct the remote control sensor of the TV.
BLUETOOTH standby mode to on. WMA9 Standard .wma with wet hands. Doing so may cause an electric
• Use a Sony High Speed HDMI cable with the —— On the system, the Control for HDMI function shock.
• [ON]: BLUETOOTH standby mode is enabled. Cable Type Logo. is set to on. Others LPCM (2ch) .wav
• Do not climb on the bar speaker, subwoofer and
• [OFF]: BLUETOOTH standby mode is disabled. • We do not recommend using an HDMI-DVI • If your TV is not compatible with Audio Return surround speakers as you may fall down and
conversion cable. The Control for HDMI function does not Notes
Note Channel, connect the optical digital cable (refer injure yourself, or system damage may result.
While the BLUETOOTH standby mode is on, standby power consumption • Check the setup of the connected device if an to the supplied Startup Guide). If the TV is not
work properly. • Some files may not play or may play with no sound
depending on the file format, the file encoding, or the
increases. image is poor or the sound does not come out compatible with Audio Return Channel, TV • Check the connection with the system (refer to recording condition. On power sources
[USB] [REPEAT] • [OFF]: Repeats off. Plays back all tracks. of the device connected via the HDMI cable. sound will not be output from the system even if the supplied Startup Guide). • Some files edited on a PC may not play. • Before operating the system, check that the
• [ONE]: Repeats one track. • Audio signals (sampling frequency, bit length, the system is connected to the TV’s HDMI IN • Enable the Control for HDMI function on the TV. • The system does not play coded files such as DRM and operating voltage is identical to your local power
• [FOLDER]: Repeats all tracks in a current folder. etc.) transmitted from an HDMI jack may be jack. For details, refer to the operating instructions of Lossless.
supply. The operating voltage is indicated on the
your TV. • The system can recognize the following files or folders in
• [RANDOM]: Repeats all tracks in a current folder in random suppressed by the connected device. • If the sound of the device that is connected to USB devices: nameplate at the rear of the subwoofer.
order. the optical input jack of the TV is not output, try • Wait a while, and then try again. If you unplug —— up to 200 folders (including empty folders and root • If you are not going to use the system for a long
• [ALL]: Repeats all tracks. the following. the system, it will take a while before operations folders) time, be sure to disconnect the system from the
—— Connect the cable box or satellite box directly can be made. Wait for 15 seconds or longer, and —— up to 200 tracks in one folder wall outlet (mains). To disconnect the AC power
[SYSTEM] [AUTO STANDBY] • [ON]: Turns on the auto standby function. When you do
not operate the system for about 20 minutes, the system Saving Power to the TV IN (OPTICAL) jack of the system. then try again.
• Make sure the devices connected to the system
—— up to folders in the 8th layer (including the root folder)
• Some USB devices may not work with this system.
cord (mains lead), grasp the plug itself; never
pull the cord.
enters standby mode automatically.
• [OFF]: Off.
Consumption • Press INPUT repeatedly to select the TV input.
• Increase the volume on the TV or cancel muting.
support the Control for HDMI function. • The system can recognize Mass Storage Class (MSC)
devices. • AC power cord (mains lead) must be changed
• Enable the Control for HDMI function of the only at a qualified service shop.
• Depending on the order in which you turn on • The sampling frequency is up to 48kHz.
[VERSION] The current firmware version information appears in the To use the system with saving power devices connected to the system. For details,
the TV and the system, the system may be On heat buildup
front panel display. consumption, change the following settings. refer to the operating instructions of your device.
muted. If this happens, turn on the TV first, then Although the system heats up during operation,
the system. • The type and number of devices that can be
[RESET] [ALL RESET] You can reset the system settings to the factory default.
For details, see “Resetting the System.” Turning the System Off by Detecting • Set the speakers setting of the TV (BRAVIA) to
controlled by the Control for HDMI function is Supported Input Audio Formats this is not a malfunction. If you continuously use
this system at high volume, the system
[UPDATE] [START] Start the software update after connecting the USB memory the Using State Audio System. Refer to the operating
restricted by the HDMI CEC standard as follows:
—— Recording devices (Blu-ray Disc recorder, DVD
(HDMI OUT (TV (ARC)) or TV IN temperature rises considerably. To avoid burning
instructions of your TV regarding how to set the
on which the software update file is stored to the system. When you set the auto standby function to on,
the system enters standby mode automatically
TV. recorder, etc.): up to 3 devices (OPTICAL)) yourself, do not touch the system.
For information about the software updates, visit the —— Playback devices (Blu-ray Disc player, DVD
following website: when you do not operate the system for about 20 • Check the sound output of the TV. Refer to the Audio formats supported by this system are as On placement
operating instructions of the TV for the TV player, etc.): up to 3 devices • Place the system in a location with adequate
https://www.sony-asia.com/section/support minutes and the system is not receiving an input follows.
settings. —— Tuner-related devices: up to 4 devices ventilation to prevent heat buildup and prolong
signal. • Dolby Digital
Note • The system supports the Dolby Digital and PCM —— Audio system (receiver/ headphone): up to 1 the life of the system.
You can update the software of the system by pressing and holding  Set [SYSTEM] – [AUTO STANDBY] to [ON]. device (used by this system) • Linear PCM 2ch (up to 48kHz)
audio formats. When you play back an • Do not place the system near heat sources or in
and BLUETOOTH on the subwoofer for 7 seconds. The default setting is [OFF]. unsupported format, set the digital audio out a place subject to direct sunlight, excessive dust,
[CANCEL] Cancels the software update. setting of the TV (BRAVIA) to “PCM.” For details,
[PROTECT] appears in the front panel
or mechanical shock.
display of the subwoofer, the sound is
Saving Power in Standby Mode refer to the operating instructions of your TV.
muted, and buttons on the remote control
On BLUETOOTH Communication • Do not place the bar speaker, subwoofer and
To save power consumption during the standby surround speakers on a soft surface (rugs,
The sound is output from both the system or subwoofer other than  (power) do not • BLUETOOTH devices should be used within
mode, set [BT] - [STANDBY] and [HDMI] - blankets, etc.) or place anything at the rear of
and the TV. work. approximately 10 meters (33 feet) (unobstructed
[CONTROL FOR HDMI] to [OFF]. the bar speaker, subwoofer and surround
• Change the audio output setting of the TV so • The protection feature is activated. distance) of each other. The effective speakers that might block the ventilation holes
The default settings for them are [ON]. that the TV sound is output from the external Press  (power) to turn the system off and communication range may become shorter and cause malfunctions.
speaker. disconnect the AC power cord (mains lead) and under the following conditions.
• If the system is being used in combination with
• Set the TV volume to minimum. check the items below. —— When a person, metal object, wall or other a TV, VCR, or tape deck, noise may result and
Resetting the System No sound or only a very low-level sound is
—— Make sure that the ventilations of the
subwoofer are not covered and turn on the
obstruction is between the devices with a
BLUETOOTH connection
picture quality may be affected. In this case,
place the system away from the TV, VCR, or tape
heard from the subwoofer. system after a while. —— Locations where a wireless LAN is installed deck.
If the system does not operate properly, reset the • Make sure the AC power cord (mains lead) of —— When the system is using the USB connection, —— Around microwave ovens that are in use
the subwoofer is connected properly (refer to • Use caution when placing the system on a
system as follows. remove the USB device and turn on the —— Locations where other electromagnetic waves surface that has been specially treated (with
the supplied Startup Guide). system. If the system operates properly, the
1 Press MENU to turn on the menu in the front occur wax, oil, polish, etc.), as staining or discoloration
panel display. • Press SW  + to increase the subwoofer current of the connected USB device is over of the surface may result.
• BLUETOOTH devices and wireless LAN (IEEE
volume. the maximum output current of the system
2 Press / to select [RESET], then press ENTER. 802.11b/g/n) use the same frequency band (2.4 • Take care to avoid any possible injury from the
• A subwoofer is for reproducing bass sound. If 500 mA, or the USB device may have an GHz). When using your BLUETOOTH device near corners of the bar speaker, subwoofer and
3 Press / to select [ALL RESET], then press the input sources contain very little bass sound abnormality. a device with wireless LAN capability, surround speakers.
ENTER. components (i.e., a TV broadcast), the sound electromagnetic interference may occur. This
from the subwoofer may be difficult to hear. The front panel display of the subwoofer • Keep 3 cm or more space under the bar speaker
4 Press / to select [START], then press ENTER. is not lit. could result in lower data transfer rates, noise, or and surround speakers when you hang it on a
• When you play content compatible with inability to connect. If this happens, try the
All the settings return to their initial status. • Press DIMMER to set the brightness to [BRIGHT] wall.
copyright protection technology (HDCP), it is not following remedies:
output from the subwoofer. or [DARK] if set to [OFF]. On operation
To cancel resetting —— Use this system at least 10 meters (33 feet)
Sensors of the TV do not work properly. away from the wireless LAN device. Before connecting other device, be sure to turn off
Select [CANCEL] in step 4. No sound or only a very low-level sound
• The bar speaker may block some sensors (such —— Turn off the power to the wireless LAN device and unplug the system.
of the device connected to the system is
when using your BLUETOOTH device within 10
If You Cannot Perform Resetting Using heard from the system. as the brightness sensor), the remote control
receiver of your TV or the emitter for 3D glasses meters (33 feet).
If you encounter color irregularity on a
the Menu • Press  + and check the volume level.
(infrared transmission) of a 3D TV that supports —— Install this system and BLUETOOTH device as
nearby TV screen
• Press  or  + to cancel the muting function. Color irregularities may be observed on certain
Press and hold  and – (volume) on the the infrared 3D glass system, or wireless closer to each other as possible.
• Make sure the input source is selected correctly. types of TV.
subwoofer for more than 5 seconds. communication. Move the bar speaker away • The radio waves broadcast by this system may
You should try other input sources by pressing from the TV within a range that allows those • If color irregularity is observed... Turn off the TV,
All the settings return to their initial status. interfere with the operation of some medical then turn it on again after 15 to 30 minutes.
INPUT repeatedly. parts to operate properly. For the locations of devices. Since this interference may result in
Tip • Check that all the cables and cords of the the sensors and remote control receiver, refer to malfunction, always turn off the power on this • If color irregularity is observed again...
The default settings are underlined on each feature system and the connected device are firmly Place the system further away from the TV.
the operating instructions supplied with the TV. system and BLUETOOTH device in the following
description.
inserted. locations:
• If the connected device supports the up- The system does not work properly On cleaning
([.DEMO] appears in the front panel —— In hospitals, on trains, in airplanes, at gas Clean the system with a soft, dry cloth. Do not use
sampling feature, you need to turn it off. stations, and any place where flammable
display). any type of abrasive pad, scouring powder, or
No sound or only very low-level sound is gasses may be present solvent such as alcohol or benzine.
• The system is in demo mode. To cancel demo
heard from the surround speakers. —— Near automatic doors or fire alarms
mode, reset the system. On handling the subwoofer
• Make sure that the cables of the surround Press and hold  (power) and – (volume) on the • This system supports security functions that
comply with the BLUETOOTH specification to Do not place your hand into the slit of the
speakers are connected properly to the subwoofer for more than 5 seconds.
subwoofer (refer to the supplied Startup Guide). ensure secure connection during subwoofer when lifting it. The speaker driver may
When you change to the TV input from the communication using BLUETOOTH technology. be damaged. When lifting it, hold the bottom of
• Check that [SPEAKER] – [MULTI SPEAKER] is set
USB input by pressing INPUT, the message However, this security may be insufficient the subwoofer.
to [ON]. If [SPEAKER] – [MULTI SPEAKER] is set to
[OFF], the sound is not output from the surround appears. depending on the setting contents and other
speakers when playing the sound of 2-channel factors, so always be careful when performing If you have any question or problem concerning
source. communication using BLUETOOTH technology. your system, please consult your nearest Sony
• Multi-channel sound which has not been • Sony cannot be held liable in any way for dealer.
recorded as surround sound is not output from damages or other loss resulting from
the surround speakers. information leaks during communication using
BLUETOOTH technology.
The surround effect cannot be obtained. • BLUETOOTH communication is not necessarily
• Depending on the input signal and the sound guaranteed with all BLUETOOTH devices that
mode setting, surround sound processing may have the same profile as this system.
not work effectively. The surround effect may be * This screen is an example for English. • BLUETOOTH devices connected with this system
subtle, depending on the program or disc. • Select the TV program by using the TV remote must comply with the BLUETOOTH specification
• To play multi channel audio, check the digital control. prescribed by the Bluetooth SIG, Inc., and must
audio output setting on the device connected to be certified to comply. However, even when a
the system. For details, refer to the operating device complies with the BLUETOOTH
instructions supplied with the connected device. specification, there may be cases where the
characteristics or specifications of the ©2020  Sony Corporation Printed in China