Autodesk

Talbot Way Telephone: 91-2030613909 E-mail: [email protected]

Small Heath Business Park Fax: 91-2030613999 Web Site: www.autodesk.com
Birmingham B10 0HJ, UK

JOB NO.: 01 PURPOSE: CMM INSPECATION

CUSTOMER: JBM AUTO TRAIL NO.& DATE: 23-09-2023
PART NO.: 2302AB200730N INSPECTED BY: SKKATO (SANTOSH )
BRACKET REINF FRRT
PART NAME: DESIGN:
BEAM LH
MODEL: DATUM: AS PAR MODEL
Measure: Master part

REFER GROUP

REFERANCE GROUP

TH-01
Lo-Tol Hi-Tol Nominal Measured Deviation Error
X -0.100 0.100 788.911 788.911 -0.000 -
Centre Y -0.100 0.100 616.124 616.124 0.000 -
Z -0.100 0.100 184.103 184.103 0.000 -
 REFER GROUP
Number of points: 5

TH-02
Lo-Tol Hi-Tol Nominal Measured Deviation Error
X -0.100 0.100 844.947 844.912 -0.035 -
Centre Y -0.100 0.100 393.055 393.120 0.065 -
Z -0.100 0.100 184.102 183.968 -0.134 -0.034

Number of points: 5

TH-03
Lo-Tol Hi-Tol Nominal Measured Deviation Error
X -0.100 0.100 844.947 844.947 -0.000 -
Centre Y -0.100 0.100 393.055 393.101 0.046 -
Z -0.100 0.100 -65.898 -66.022 -0.124 -0.024

Number of points: 5

TH-04
Lo-Tol Hi-Tol Nominal Measured Deviation Error
X -0.100 0.100 788.911 788.911 -0.000 -
Centre Y -0.100 0.100 616.124 616.124 0.000 -
Z -0.100 0.100 -65.897 -65.913 -0.015 -

Number of points: 5

GD&T DATUM POINTS

DATUM SURFACE POINTS

Nominal Measured TOL. Deviation To.Dev
Name X Y Z X Y Z -Tol +Tol dX dY dZ DL
DATUM A/1 761.664 508.873 125.709 761.766 508.901 125.709 -0.100 0.100 0.102 0.028 0.000 -0.105
DATUM A/2 771.745 469.095 125.596 771.849 469.119 125.596 -0.100 0.100 0.104 0.024 0.000 -0.106
DATUM A/3 724.330 458.655 19.699 724.255 458.636 19.699 -0.100 0.100 -0.075 -0.019 0.000 0.077
DATUM A/4 713.586 501.424 3.475 713.844 501.489 3.475 -0.100 0.100 0.258 0.065 0.000 -0.266
 DATUM SURFACE POINTS

0.119

0.052

-0.016
DATUM A/1 DATUM A/2 DATUM A/3 DATUM A/4
-0.083

-0.150

-0.217

-0.284

Number of points 4 Mean -0.100 Upper Tolerance 0.100

Number of failures 0 Standard deviation 0.140 Lower Tolerance -0.100
Number of points within tolerance 1 Maximum value 0.077
Number of points below tolerance 3 Minimum value -0.266
Number of points above tolerance 0 Performance 25%
0.5
2
0.4
0.3
1 0.2
0.1
0 0.0
-0.525

-0.496

-0.467

-0.437

-0.408

-0.379

-0.349

-0.320

-0.291

-0.261

-0.232

-0.203

-0.173

-0.144

-0.115

-0.085

-0.056

-0.027

0.003

0.032

0.061

0.091

0.120

0.149

0.179

0.208

0.237

0.267

0.296

0.325
DATUM POINTS
DATUM C
Lo-Tol Hi-Tol Nominal Measured Deviation Error
Centre Y -0.100 0.100 487.763 488.019 0.256 0.156

Number of points: 7

DATUM B
Lo-Tol Hi-Tol Nominal Measured Deviation Error
Y -0.100 0.100 466.000 465.839 -0.161 -0.061
Centre
Z -0.100 0.100 14.000 13.757 -0.243 -0.143

Number of points: 5

Geometric Group 1
 Geometric Group 1

CAD View Image 2

P1 HOLE
Lo-Tol Hi-Tol Nominal Measured Deviation Error
X -0.500 0.500 716.307 716.541 0.234 -
Centre Y -0.500 0.500 490.592 490.784 0.191 -
Z -0.500 0.500 10.203 10.081 -0.122 -

Number of points: 4

P2 HOLE
Lo-Tol Hi-Tol Nominal Measured Deviation Error
X -0.500 0.500 721.671 721.570 -0.101 -
Centre Y -0.500 0.500 469.239 469.263 0.024 -
Z -0.500 0.500 -0.797 -0.900 -0.103 -

Number of points: 5

MATING SURFACE WITH BEAM BUMPER

 MATING SURFACE WITH BEAM BUMPER

MATING SURFACE WITHBEAM BUMPER FRT OTRMARKED AS"Y"

Nominal Measured TOL. Deviation To.Dev

Name X Y Z X Y Z -Tol +Tol dX dY dZ DL
SP-1 771.610 469.673 127.874 771.812 469.720 127.874 -0.500 0.500 0.202 0.047 0.000 -0.208
SP-2 770.573 474.045 113.500 770.547 474.039 113.500 -0.500 0.500 -0.026 -0.006 0.000 0.027
SP-3 767.579 486.297 128.181 767.837 486.362 128.181 -0.500 0.500 0.258 0.065 0.000 -0.266
SP-4 765.948 492.721 116.351 766.028 492.741 116.351 -0.500 0.500 0.080 0.020 -0.000 -0.082
SP-5 765.861 493.063 127.535 766.103 493.125 127.535 -0.500 0.500 0.243 0.062 -0.000 -0.251
SP-6 762.317 506.474 129.630 762.546 506.536 129.630 -0.500 0.500 0.229 0.062 0.000 -0.237
SP-7 760.475 513.189 125.425 760.713 513.255 125.425 -0.500 0.500 0.238 0.066 0.000 -0.247
SP-8 760.339 513.338 111.022 760.350 513.341 111.021 -0.500 0.500 0.011 0.003 -0.001 -0.012
SP-9 725.035 455.848 -8.142 724.838 455.799 -8.142 -0.500 0.500 -0.197 -0.050 -0.000 0.203
SP-10 724.779 456.866 10.178 724.634 456.829 10.178 -0.500 0.500 -0.146 -0.037 -0.000 0.150
SP-11 718.150 483.255 -9.455 718.128 483.249 -9.455 -0.500 0.500 -0.022 -0.006 0.000 0.023
SP-12 718.444 482.087 17.556 718.620 482.131 17.556 -0.500 0.500 0.177 0.044 0.000 -0.182
SP-13 712.942 503.989 17.804 713.263 504.070 17.804 -0.500 0.500 0.322 0.081 0.000 -0.332
SP-14 712.930 504.035 -10.636 712.998 504.052 -10.636 -0.500 0.500 0.068 0.017 0.000 -0.070

0.551

0.367

0.184

0.000
SP-1 SP-2 SP-3 SP-4 SP-5 SP-6 SP-7 SP-8 SP-9 SP-10 SP-11 SP-12 SP-13 SP-14
-0.184

-0.367

-0.551
 MATING SURFACE WITH BEAM BUMPER
Number of points 14 Mean -0.106 Upper Tolerance 0.500
Number of failures 0 Standard deviation 0.166 Lower Tolerance -0.500
Number of points within tolerance 14 Maximum value 0.203
Number of points below tolerance 0 Minimum value -0.332
Number of points above tolerance 0 Performance 100%
0.5
3
0.4

2 0.3
0.2
1
0.1
0 0.0
-0.609

-0.574

-0.540

-0.505

-0.470

-0.436

-0.401

-0.366

-0.331

-0.297

-0.262

-0.227

-0.193

-0.158

-0.123

-0.088

-0.054

-0.019

0.016

0.050

0.085

0.120

0.154

0.189

0.224

0.259

0.293

0.328

0.363

0.397
PROFILE SURFACE POINTS

PROFILE SURFACE POINTS

Nominal Measured TOL. Deviation To.Dev

Name X Y Z X Y Z -Tol +Tol dX dY dZ DL
SP-1 725.421 454.789 36.577 725.390 454.781 36.580 -1.500 1.500 -0.031 -0.008 0.003 0.032
SP-2 731.351 456.615 53.774 730.931 456.514 54.075 -1.500 1.500 -0.419 -0.100 0.301 0.526
SP-3 744.035 458.378 66.048 743.561 458.269 66.627 -1.500 1.500 -0.474 -0.109 0.579 0.756
SP-4 758.025 460.705 78.086 757.504 460.585 78.640 -1.500 1.500 -0.521 -0.119 0.553 0.770
SP-5 765.476 463.070 87.759 764.870 462.931 88.144 -1.500 1.500 -0.606 -0.139 0.384 0.731
SP-6 771.794 464.681 104.353 771.445 464.601 104.423 -1.500 1.500 -0.349 -0.080 0.071 0.365
SP-7 757.550 513.716 97.905 757.469 513.693 97.934 -1.500 1.500 -0.081 -0.023 0.029 0.089
SP-8 748.662 511.191 81.647 748.495 511.145 81.794 -1.500 1.500 -0.167 -0.047 0.147 0.227
SP-9 738.196 508.171 71.590 738.030 508.125 71.795 -1.500 1.500 -0.165 -0.046 0.205 0.267
SP-10 728.251 505.208 62.884 728.118 505.171 63.047 -1.500 1.500 -0.132 -0.037 0.163 0.213
SP-11 718.845 503.307 52.790 718.870 503.313 52.774 -1.500 1.500 0.025 0.007 -0.017 -0.031
SP-12 713.006 504.517 37.570 713.372 504.610 37.530 -1.500 1.500 0.366 0.093 -0.040 -0.380
SP-13 723.048 479.380 40.704 722.733 479.301 40.779 -1.500 1.500 -0.315 -0.079 0.074 0.334
SP-14 741.751 467.585 62.027 741.198 467.453 62.705 -1.500 1.500 -0.553 -0.132 0.677 0.884
SP-15 735.949 496.913 63.361 735.593 496.818 63.801 -1.500 1.500 -0.356 -0.096 0.439 0.574
SP-16 748.887 487.815 71.923 748.483 487.711 72.420 -1.500 1.500 -0.404 -0.104 0.497 0.649
SP-17 761.136 504.293 92.205 760.927 504.237 92.303 -1.500 1.500 -0.209 -0.056 0.098 0.237
SP-18 766.373 499.439 104.333 766.199 499.393 104.366 -1.500 1.500 -0.174 -0.046 0.034 0.183
SP-19 764.667 470.846 83.783 764.146 470.723 84.155 -1.500 1.500 -0.522 -0.124 0.373 0.653
SP-20 771.122 474.565 98.443 770.718 474.469 98.571 -1.500 1.500 -0.405 -0.097 0.128 0.435
 PROFILE SURFACE POINTS

1.653

1.102

0.551

-0.000

SP-10

SP-11

SP-12

SP-13

SP-14

SP-15

SP-16

SP-17

SP-18

SP-19

SP-20
SP-1

SP-2

SP-3

SP-4

SP-5

SP-6

SP-7

SP-8

SP-9
-0.551

-1.102

-1.653

Number of points 20 Mean 0.376 Upper Tolerance 1.500

Number of failures 0 Standard deviation 0.321 Lower Tolerance -1.500
Number of points within tolerance 20 Maximum value 0.884
Number of points below tolerance 0 Minimum value -0.380
Number of points above tolerance 0 Performance 100%
0.5
4
0.4
3 0.3
2 0.2
1 0.1
0 0.0
-0.599

-0.532

-0.464

-0.397

-0.330

-0.263

-0.196

-0.128

-0.061

0.006

0.073

0.140

0.208

0.275

0.342

0.409

0.476

0.544

0.611

0.678

0.745

0.813

0.880

0.947

1.014

1.081

1.149

1.216

1.283

1.350
SURFACE PONTS

SIDE SURFACE POINTS

Nominal Measured TOL. Deviation To.Dev

Name X Y Z X Y Z -Tol +Tol dX dY dZ DL
SP-1 714.586 511.895 -10.420 714.756 511.514 -10.420 -1.500 1.500 0.170 -0.381 -0.000 -0.417
SP-2 714.597 511.900 8.347 714.781 511.487 8.347 -1.500 1.500 0.184 -0.412 0.000 -0.452
SP-3 714.457 511.837 30.052 714.573 511.577 30.052 -1.500 1.500 0.116 -0.259 0.000 -0.284
SP-4 716.046 509.828 44.073 715.957 510.023 44.174 -1.500 1.500 -0.088 0.195 0.100 0.237
SP-5 726.877 509.883 57.765 726.821 510.017 57.791 -1.500 1.500 -0.056 0.134 0.025 0.147
SP-6 745.943 515.138 75.181 745.889 515.268 75.199 -1.500 1.500 -0.054 0.130 0.018 0.142
 SURFACE PONTS
Nominal Measured TOL. Deviation To.Dev
Name X Y Z X Y Z -Tol +Tol dX dY dZ DL
SP-7 757.379 518.309 92.470 757.260 518.564 92.490 -1.500 1.500 -0.119 0.255 0.020 0.282
SP-8 761.572 519.450 127.478 761.417 519.773 127.478 -1.500 1.500 -0.156 0.322 0.000 0.358
SP-9 778.042 460.326 129.948 778.010 461.004 129.948 -1.500 1.500 -0.032 0.678 0.000 -0.678
SP-10 778.409 460.342 113.205 778.388 460.790 113.204 -1.500 1.500 -0.021 0.447 -0.001 -0.448
SP-11 766.394 457.952 82.392 766.398 457.895 82.398 -1.500 1.500 0.005 -0.056 0.006 0.057
SP-12 751.816 454.650 67.859 751.831 454.516 67.877 -1.500 1.500 0.015 -0.134 0.018 0.136
SP-13 735.037 450.697 49.421 735.055 450.470 49.439 -1.500 1.500 0.018 -0.227 0.018 0.229
SP-14 731.711 449.885 17.864 731.740 449.481 17.864 -1.500 1.500 0.029 -0.403 -0.000 0.404
SP-15 730.890 449.826 -9.275 730.943 449.087 -9.275 -1.500 1.500 0.053 -0.739 0.000 0.741

1.653

1.102

0.551

-0.000
SP-1 SP-2 SP-3 SP-4 SP-5 SP-6 SP-7 SP-8 SP-9 SP-10 SP-11 SP-12 SP-13 SP-14 SP-15
-0.551

-1.102

-1.653

Number of points 15 Mean 0.030 Upper Tolerance 1.500

Number of failures 0 Standard deviation 0.396 Lower Tolerance -1.500
Number of points within tolerance 15 Maximum value 0.741
Number of points below tolerance 0 Minimum value -0.678
Number of points above tolerance 0 Performance 100%
0.5
3
0.4

2 0.3
0.2
1
0.1
0 0.0
-1.173

-1.090

-1.007

-0.924

-0.841

-0.758

-0.675

-0.592

-0.509

-0.426

-0.343

-0.260

-0.177

-0.094

-0.011

0.072

0.155

0.238

0.321

0.404

0.487

0.570

0.653

0.736

0.819

0.902

0.984

1.067

1.150

1.233
TRIM POINTS
 TRIM POINTS

TRIM POINTS VIEW-1

Nominal Measured TOL. Deviation To.Dev

Name X Y Z X Y Z -Tol +Tol dX dY dZ DL
SP-1 776.266 461.229 131.036 776.505 461.240 131.878 -1.000 1.000 0.239 0.011 0.842 0.876
SP-2 769.653 481.278 131.227 769.661 481.266 131.454 -1.000 1.000 0.008 -0.012 0.227 0.228
SP-3 763.061 505.420 131.417 763.062 505.420 131.488 -1.000 1.000 0.000 -0.001 0.071 0.071
SP-4 762.044 519.594 131.582 762.016 519.580 131.450 -1.000 1.000 -0.028 -0.014 -0.132 -0.136
SP-5 729.864 449.982 -13.219 729.922 449.986 -13.471 -1.000 1.000 0.058 0.004 -0.252 0.258
SP-6 724.415 461.285 -13.297 724.415 461.285 -13.657 -1.000 1.000 0.000 0.000 -0.360 0.360
SP-7 718.247 485.116 -13.297 718.247 485.116 -14.084 -1.000 1.000 0.000 0.000 -0.787 0.787
SP-8 714.011 510.756 -13.297 714.011 510.756 -14.687 -1.000 1.000 0.000 0.000 -1.390 1.390
SP-9 720.471 478.343 46.275 720.712 478.404 46.142 -1.000 1.000 0.242 0.061 -0.133 -0.283
SP-10 727.577 468.348 54.939 727.148 468.336 55.244 -1.000 1.000 -0.429 -0.011 0.305 0.527
SP-11 723.867 490.067 57.177 723.866 490.067 57.177 -1.000 1.000 -0.000 -0.000 0.000 0.000
SP-12 733.033 481.429 63.363 732.172 481.211 64.108 -1.000 1.000 -0.861 -0.218 0.745 1.159

1.512

1.073

0.634

0.195

SP-1
-0.244 SP-2 SP-3 SP-4 SP-5 SP-6 SP-7 SP-8 SP-9 SP-10 SP-11 SP-12

-0.683

-1.122
 TRIM POINTS
Number of points 12 Mean 0.436 Upper Tolerance 1.000
Number of failures 0 Standard deviation 0.523 Lower Tolerance -1.000
Number of points within tolerance 10 Maximum value 1.390
Number of points below tolerance 0 Minimum value -0.283
Number of points above tolerance 2 Performance 83%
0.5
2
0.4
0.3
1 0.2
0.1
0 0.0
-1.150

-1.041

-0.932

-0.822

-0.713

-0.603

-0.494

-0.384

-0.275

-0.165

-0.056

0.053

0.163

0.272

0.382

0.491

0.601

0.710

0.819

0.929

1.038

1.148

1.257

1.367

1.476

1.586

1.695

1.804

1.914

2.023
Number of controlled parts

Autodesk www.powerinspect.com www.autodesk.com