Joystick Module with Bluetooth quick start guide

iDevice Bluetooth switch access for iPhone, iPad & iOS software

ACTIVATING BLUETOOTH MODE 1 3 SETTING UP IDEVICE SWITCH CONTROL ON IOS DEVICE

1. Press and hold soft key #1 (blue button in upper left corner) to enter settings 1. Enable Accessibility Shortcut for Switch Control (Settings > General > Accessibility)
menu. 13:2
0
For OMNI2: Press Button #1 to enter settings menu M3 2. Turn on Switch Control

2. Using joystick, scroll down to “Bluetooth”, right command of joystick to select. 3. Recommend Scanning Style: Manual
For OMNI2: use navigation, buttons to scroll to “Bluetooth”, press right to select.
4. Add Switches (Settings > General > Accessibility > Switch Control > Switches >
3. Scroll/Navigate to enable desired iDevice (“iDevice” or “R-Net iDevice2”), right or 2 4 Add New Switches > External)
left command of joystick to turn <on>. – Short= 0.1-2.0 sec; Medium= 2.0- 3.5 sec; Long= 3.5-5.0

4. Scroll/Navigate to “Exit” at bottom of screen, right command to “Exit” to 5. Name Switch and assign command (Example Short Forward = Tap)
settings menu.
6. Turn Switch Control On
5. Scroll/Navigate to “Exit” at bottom of settings menu, right command to “Exit”.
EXAMPLE EXTERNAL SWITCH
6. Power cycle chair, twice. P-M SETUP USING DRIVE CONTROL
ON
Short Command Forward — Tap
Short Command Right — Move to Next
OFF
Short Command Left — Move to Previous
PAIRING PERMOBIL JOYSTICK MODULE WITH Short Command Reverse — Scanner Menu
DEVICE Long Command Reverse — Siri

1. Press and hold soft key #3 (blue button in upper right corner) to enter
Bluetooth Mode (“M3”). Option to use power/mode toggle to access Mode
3. 1
For OMNI2: Enter user menu and select Bluetooth with the alternative drive 1
13:20
input device “right” command.

2. Select desired device, if more than one device is active, by scrolling and
selecting with right command of joystick.
For OMNI2: Select desired device, if more than one device is active, by scrolling
and selecting with the alternative drive input device “right” command.
2
3. Put in discoverable mode by holding joystick forward for 15 seconds until
you hear a beep, repeat by holding joystick in reverse for 15 seconds until P M
you hear a second beep.
For OMNI: Put in discoverable mode by holding the alternative drive input
device forward for 15 seconds until you hear a beep, repeat by holding the
alternative drive input device in reverse for 15 seconds until you hear a second
beep.
- +
4. Enter Bluetooth settings on device being paired, and if required search for
new device. Pair with “iDevice 1” or “iDevice 2”.

www.permobil.com
Joystick Module with Bluetooth quick start guide

Bluetooth™ mouse emulation for PC, Mac & Android phone or tablet,
iOS (version 13 and higher) iPhone or iPad

ACTIVATING BLUETOOTH MODE

1. Press and hold soft key #1 (blue button in upper left corner) to enter settings menu.
For OMNI2: Press Button #1 to enter settings menu

2. Using joystick, scroll down to “Bluetooth”, right command of joystick to select.

For OMNI2: use navigation, buttons to scroll to “Bluetooth”, press right to select.

3. Scroll/Navigate to enable desired Bluetooth device (“R-net Mouse 1” or “R-net

Mouse ”),
“right or left command of joystick to turn <on>.

4. Scroll/Navigate to “Exit” at bottom of screen, right command to “Exit” to settings

menu.

5. Scroll/Navigate to “Exit” at bottom of settings menu, right command to “Exit”.

6. Power cycle chair, twice.

1 3 1
PAIRING PERMOBIL JOYSTICK MODULE WITH DEVICE 13:20 1 13:20

1. Press and hold soft key #3 (blue button in upper right corner) to enter Bluetooth M1
Mode (“M3”) or press “Mode” button access Mode 3.
For OMNI2: Enter user menu and select Bluetooth with the alternative drive input device
“right” command.

2. Select desired device, if more than one device is active, by scrolling and selecting 2 4
with right command of joystick.
For OMNI2: Select desired device, if more than one device is active, by scrolling and
selecting with the alternative drive input device “right” command. P M

3. Put in discoverable mode by holding joystick forward for 15 seconds until you hear a
beep, repeat by holding joystick in reverse for 15 seconds until you hear a second
beep.
5
For OMNI: Put in discoverable mode by holding the alternative drive input device forward
for 15 seconds until you hear a beep, repeat by holding the alternative drive input device
P-M
ON
- +
in reverse for 15 seconds until you hear a second beep. OFF

4. For Mac, PC and Android: Enter Bluetooth settings on device being paired, and if
required search for new device. Pair with “R-net Mouse 1” or “R-net Mouse ”. If
prompted for a passcode, enter 0000. Default settings in “Mouse Mode” (Joystick only)
For iOS 13 and higher: Settings - Accessibility - Touch
Assistive touch: ON Softkey #2 – Short hold is left click
Pointing devices - Device - Bluetooth Devices: Softkey #3 – Long hold is return to drive mode (“M1”)
Search and select “R-net Mouse 1” or “R-net Mouse ”. Softkey #4 - Short hold is right click;
Speed toggle up/down long command = Scroll up/down

www.permobil.com