Mad Winter 22 Model Answer

lOMoARcPSD|24721702
Mad Winter 22 - model answer
Diploma in Computer Engineering (Government Polytechnic Thane)
Scan to open on Studocu
Studocu is not sponsored or endorsed by any college or university

Downloaded by Shailesh Koshe ([email protected])
lOMoARcPSD|24721702
MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION

(Autonomous)
(ISO/IEC - 27001 - 2013 Certified)
__________________________________________________________________________________________________
WINTER – 2022 EXAMINATION
Subject Name Mobile Application Development Model Answer Subject Code: 22617
Important Instructions to examiners: XXXXX
1) The answers should be examined by key words and not as word-to-word as given in the model answer
scheme.
2) The model answer and the answer written by candidate may vary but the examiner may try to assess the
understanding level of the candidate.
3) The language errors such as grammatical, spelling errors should not be given more Importance (Not
applicable for subject English and Communication Skills.
4) While assessing figures, examiner may give credit for principal components indicated in the figure. The
figures drawn by candidate and model answer may vary. The examiner may give credit for any equivalent
figure drawn.
5) Credits may be given step wise for numerical problems. In some cases, the assumed constant values may
vary and there may be some difference in the candidate’s answers and model answer.
6) In case of some questions credit may be given by judgement on part of examiner of relevant answer based
on candidate’s understanding.
7) For programming language papers, credit may be given to any other program based on equivalent concept.
8) As per the policy decision of Maharashtra State Government, teaching in English/Marathi and Bilingual
(English + Marathi) medium is introduced at first year of AICTE diploma Programme from academic year
2021-2022. Hence if the students in first year (first and second semesters) write answers in Marathi or
bilingual language (English +Marathi), the Examiner shall consider the same and assess the answer based
on matching of concepts with model answer.
Q. Sub Note: As Android programs contain many of the auto generated code statements from IDE, Marking
No. Q. while assessing such answers correct logical steps taken to obtain the required output can be Scheme
N. considered.
Answer
1 Attempt any FIVE of the following: 10 M
a) Define OHA and state goal of OHA. 2M
Ans The OHA is the group that is in charge of the Android smartphones operating system. It was (Define : 1
created by Google. The Open Handset Alliance (OHA) is consortium of multiple companies M, Stating
like Samsung, Sony, Intel and many more to provide services and deploy handsets using goal 1 M)
android platform.
The Open Handset Alliance (OHA) is an association whose goal is to develop open standards
for mobile devices, promote innovation in mobile phones and provide a better experience for
consumers at a lower cost.
b) Define Android Virtual Devices (AVD). 2M
Ans An Android Virtual Device (AVD) is a configuration that defines the characteristics of an (Define : 2
Android phone, tablet, Wear OS, Android TV, or Automotive OS device that you want to M ,any valid
simulate in the Android Emulator. The AVD Manager is an interface you can launch from definition
Android Studio that helps you create and manage AVDs. should be
considered)
Page No: 1 | 41

lOMoARcPSD|24721702

(Autonomous)
__________________________________________________________________________________________________
c) State how the APK files are built? 2M
Ans  The javac compiler compiles the java source file into the class file. (For each
 The dx tool takes all the class files of your application and generates a single .dex file which step 1/2 M)
is a platform specific tool.
 Then Android Assets Packaging Tool (aapt) handles the packaging process and finally
creates an executable file with extension .apk.
 An APK file contains all of a program's code (such as .dex files), resources, assets,
certificates, and manifest file.
d) Enlist the elements of UI. 2M
Ans Elements of UI. (1/2 mark

for each UI
 EditText element,
 TextView any 4 UI
elements
 ListView
expected)
 GridView
 ScrollView
 ImageView
 ToggleButton
 CheckBox
 RadioButton
OR
Components of UI
 Menu Bar
 Toolbar
 Navigation Bar
 Editor Tabs
 Editor
 Project Explorer
 Status Bar
 Tool Buttons
e) State the uses of Intent in Android. 2M
Ans An Intent is a messaging object you can use to request an action from another app component. (1 M for
Intents are used for facilitating communication between components like Activities, Services each use, 2
and Broadcast Receivers. uses
expected)
f) Name any four methods to get location data in android. 2M
Ans •float distanceTo(Location dest) (1/2 M for

•float getAccuracy() each
•float getBearing() method,
Page No: 2 | 41

lOMoARcPSD|24721702

(Autonomous)
__________________________________________________________________________________________________
•double getAltitude() any 4
•double getLatitude() methods
•float getSpeed() expected)
•boolean hasAccuracy()
•boolean hasAltitude()
•boolean hasBearing()
•boolean hasBearing()
•boolean hasSpeed()
•void reset()
•void setAccuracy(float accuracy)
•void setAltitude(double altitude)
g) Explain significance of content provider. 2M
Ans Content Providers are used to share data between two applications. This can be implemented (1 M for
in two ways: each
1. When you want to implement the existing content provider in another application. significance
2. When you want to create a new content provider that can share its data with other ,
Applications
2. Attempt any THREE of the following: 12 M
a) Describe the different features of Android. 4M
Ans User Interface: The user interface of the Android operating system is straight forward, and (1 M for
these features make it very user friendly. each
feature, 4
Multiple Language Support: Android supports multiple languages in its operating system and features
one can change the language very easily based on one’s requirement, the International expected)
languages supported are English, Germany, Chinese, Dutch, French, German, Japanese,
Korean, Russian, and many more also some native language of India is also Supported Like
Hindi, Marathi, Gujarati, Punjabi and many more.
Multi-tasking: Android provides support to run apps and services in the background with ease
which allows the users to use multiple apps at the same time.
Connectivity: Android has extensive support to the connectivity and it supports connectivity
such as WiFi, Bluetooth, Hotspot, CDMA, GSM, NFC, VOLTE, UBB, VPN, 3G network
band, and 4G Network Band.
Extensive Application Support: Android have Play store which is used as the major tool to
download and update applications on the operating system, however, one can download the
installer(often called as APK file) and install it manually, but it is not much recommended as
third party applications could be prone to some security breach in the smartphones.
b) Explain features of Android SDK. 4M
Ans Android SDK is a collection of libraries and Software Development tools that are essential for (1 M for
Developing Android Applications. Whenever Google releases a new version or update of each
Page No: 3 | 41

lOMoARcPSD|24721702

(Autonomous)
__________________________________________________________________________________________________
Android Software, a corresponding SDK also releases with it. In the updated or new version of feature, any
SDK, some more features are included which are not present in the previous version. Android 4 features
SDK consists of some tools which are very essential for the development of Android expected)
Application. These tools provide a smooth flow of the development process from developing
and debugging. Android SDK is compatible with all operating systems such as Windows,
Linux, macOS, etc.
1. Android Tool: This tool helps in managing the Android Virtual Device projects as well as
the installed components of the software development kit.
2. Emulator Tool: It helps us in testing the applications without the need of using the
application on an actual device.
3. Dalvik Debug Monitor Server(DDMS): DDMS is very useful for debugging the Android
Application.
4. Android Debug Bridge (ADB): It is a very versatile command-line tool and is helpful for
the communication between the developer and the Emulator or the Android device that is
connected.
c) Explain the Android security model. 4M
Ans The Android security model is primarily based on a sandbox and permission mechanism. Each 2 M for
application is running in a specific Dalvik virtual machine with a unique user ID assigned to it, explanation
which means the application code runs in isolation from the code of all other applications. , 2 M for
Therefore, one application has not granted access to other applications’ files. explaining
permissions
Android application has been signed with a certificate with a private key Know the owner of , any 2
the application is unique. This allows the author of the application will be identified if needed. permissions
When an application is installed in the phone is assigned a user ID, thus avoiding it from expected)
affecting it other applications by creating a sandbox for it. This user ID is permanent on which
devices and applications with the same user ID are allowed to run in a single process. This is a
way to ensure that a malicious application has Cannot access / compromise the data of the
genuine application. It is mandatory for an application to list all the resources it will Access
during installation. Terms are required of an application, in the installation process should be
user-based or interactive Check with the signature of the application.
Declaring and Using Permissions
The purpose of a permission is to protect the privacy of an Android user. Android apps must
request permission to access sensitive user data (such as contacts and SMS), as well as certain
system features (such as camera and internet). Depending on the feature, the system might grant
the permission automatically or might prompt the user to approve the request.
Permissions are divided into several protection levels. The protection level affects whether
runtime permission requests are required. There are three protection levels that affect third-
party apps: normal, signature, and dangerous permissions.
Normal permissions: Normal permissions cover areas where your app needs to access data or
resources outside the app’s sandbox, but where there’s very little risk to the user’s privacy or
Page No: 4 | 41

lOMoARcPSD|24721702

(Autonomous)
__________________________________________________________________________________________________
the operation of other apps. For example, permission to set the time zone is a normal
permission. If an app declares in its manifest that it needs a normal permission, the system
automatically grants the app that permission at install time. The system doesn’t prompt the user
to grant normal permissions, and users cannot revoke these permissions.
Signature permissions: The system grants these app permissions at install time, but only when
the app that attempts to use permission is signed by the same certificate as the app that defines
the permission.
Dangerous permissions: Dangerous permissions cover areas where the app wants data or
resources that involve the user’s private information, or could potentially affect the user’s
stored data or the operation of other apps. For example, the ability to read the user’s contacts is
a dangerous permission. If an app declares that it needs a dangerous permission, the user must
explicitly grant the permission to the app. Until the user approves the permission, your app
cannot provide functionality that depends on that permission. To use a dangerous permission,
your app must prompt the user to grant permission at runtime. For more details about how the
user is prompted, see Request prompt for dangerous permission.
d) Elaborate the need of permissions in Android. Explain the permissions to set 4M
system functionalitics like SEND-SMS, bluetooth.
Ans The purpose of a permission is to protect the privacy of an Android user. Android apps must(2 M for
request permission to access sensitive user data (such as contacts and SMS), as well as certain
explanation
system features (such as camera and internet). Depending on the feature, the system might grant
of need, 1
the permission automatically or might prompt the user to approve the request. M each for
explaining
 android. permission. SEND_SMS permissions
Allows the app to send SMS messages. This may result in unexpected charges. of Sms and
Malicious apps may cost you money by sending messages without your confirmation. bluetooth)
Following is the code snippet to set SEND_SMS permissions in manifest file.

<uses-permission android: name="android.permission.SEND_SMS"/>
 android. permission. BLUETOOTH

You need to provide following permissions in AndroidManifest.xml file.
<uses-permission android:name="android.permission.BLUETOOTH" />
<uses-permission android:name="android.permission.BLUETOOTH_ADMIN" />
a) Explain data and time picker with its method. 4M
Ans Date Picker: Date picker

In Android, DatePicker is a widget used to select a date. It allows to select date by day, month (any two
and year in our custom UI (user interface). If we need to show this view as a dialog then we methods) 2
have to use a DatePickerDialog class. M and time
Methods of DatePicker:
picker (any
Page No: 5 | 41

lOMoARcPSD|24721702

(Autonomous)
__________________________________________________________________________________________________
1. setSpinnersShown(boolean shown): This method is used to set whether the spinner of the two
date picker in shown or not. In this method you have to set a Boolean value either true or false. methods) 2
True indicates spinner is shown, false value indicates spinner is not shown. Default value for M
this function is true.
Syntax:
DatePicker simpleDatePicker = (DatePicker)findViewById(R.id.simpleDatePicker);
simpleDatePicker.setSpinnersShown(false);
2. getDayOfMonth(): This method is used to get the selected day of the month from a date
picker.
This method returns an integer value.
DatePicker simpleDatePicker = (DatePicker) findViewById(R.id.simpleDatePicker);
int day = simpleDatePicker.getDayOfMonth();
3. getMonth(): This method is used to get the selected month from a date picker. This method
returns an integer value.
int month = simpleDatePicker.getMonth();
4. getYear(): This method is used to get the selected year from a date picker. This method
int year = simpleDatePicker.getYear();
5. getFirstDayOfWeek(): This method is used to get the first day of the week. This method
int firstDay=simpleDatePicker.getFirstDayOfWeek();
TimePicker:
In Android, TimePicker is a widget used for selecting the time of the day in either AM/PM
mode or 24 hours mode. The displayed time consist of hours, minutes and clock format. If we
need to show this view as a Dialog then we have to use a TimePickerDialog class.
Methods of TimePicker:
1. setCurrentHour(Integer currentHour): This method is used to set the current hours in a
time picker.
setHour(Integer hour): setCurrentHour() method was deprecated in API level 23. From api
level 23 we have to use setHour(Integer hour). In this method there is only one parameter of
integer type which is used to set the value for hours.
TimePicker simpleTimePicker=(TimePicker)findViewById(R.id.simpleTimePicker);
simpleTimePicker.setCurrentHour(5);
simpleTimePicker.setHour(5);
2. setCurrentMinute(Integer currentMinute): This method is used to set the current minutes
in a time picker. setMinute(Integer minute): setCurrentMinute() method was deprecated in API
level 23. From api level 23 we have to use setMinute(Integer minute). In this method there is
only one parameter of integer type which set the value for minutes.
TimePicker simpleTimePicker=(TimePicker)findViewById(R.id.simpleTimePicker);
simpleTimePicker.setCurrentMinute(35);
simpleTimePicker.setMinute(35);
4. getCurrentMinute(): This method is used to get the current minutes from a time picker.
Page No: 6 | 41

lOMoARcPSD|24721702

(Autonomous)
__________________________________________________________________________________________________
getMinute(): getCurrentMinute() method was deprecated in API level 23. From api level 23
we have to use getMinute(). This method returns an integer value.
TimePicker simpleTimePicker = (TimePicker)findViewById(R.id.simpleTimePicker);
int minutes = simpleTimePicker.getCurrentMinute();
int minutes = simpleTimePicker.getMinute();
5. setIs24HourView(Boolean is24HourView): This method is used to set the mode of the
Time picker either 24 hour mode or AM/PM mode. In this method we set a Boolean value
either true or false. True value indicate 24 hour mode and false value indicate AM/PM mode.
simpleTimePicker.setIs24HourView(true);
6. is24HourView(): This method is used to check the current mode of the time picker. This
method returns true if its 24 hour mode or false if AM/PM mode is set.
Boolean mode=simpleTimePicker.is24HourView();
7.setOnTimeChangedListener(TimePicker.OnTimeChangedListener
onTimeChanged(): This method is used to set the callback that indicates the time has been
adjusted by the user.
onTimeChanged(TimePicker view, int hourOfDay, int minute) is an override function of this
listener in which we have three parameters first is for TimePicker, second for getting hour of
the day and last is for getting the minutes after changing the time of the time picker.
simpleTimePicker.setOnTimeChangedListener(new TimePicker.OnTimeChangedListener() {
@Override
public void onTimeChanged(TimePicker view, int hourOfDay, int minute) {
}
});
b) Explain the steps to install and configure Android studio and SDK. 4M
Ans  Download the latest version of Android Studio from above URL and launch Android 4 M for
Studio.exe file by double clicking on it. steps
 The initial android studio setup screen will open in that click Next to continue for further
steps of environment setup
 Now we need to select a required components to setup an android environment. Here
we selected all three components (Android Studio, Android SDK and Android Virtual
Device) and click Next.
 Now we need to agree the License agreements to proceed further, click on I Agree
button
 Now we need to specify the local machine drive location to install Android Studio and
Android SDK.
 After selecting the location path to install required components, click Next.
 Now select the start menu folder to create a shortcut for android studio and click Install
 Once we click Install button the installation process will start and click Next after
completion of Installation.
 After that it will show installation completion wizard in that click Finish to launch
android studio While launching Android Studio it will give you an option to import
Page No: 7 | 41

lOMoARcPSD|24721702

(Autonomous)
__________________________________________________________________________________________________
settings from previous version of studio. In case if you don’t have any previous version,
select second option and click OK
 Now android studio will open a welcome wizard window in that click Next to validate
our current Android SDK and development environment setup
 Now select a Standard installation type and click Next to install a common settings and
options
 Now verify settings and click Finish to complete android studio setup process
 After completion of required components installation click on Finish
 After completion of all required components installation, we will be able to see Android
Studio welcome window
c) Explain the activity life cycle. 4M
Ans Diagram 2
M
explanation
2M
Activities have a predefined life-cycle methods as follows:
Page No: 8 | 41

lOMoARcPSD|24721702

(Autonomous)
__________________________________________________________________________________________________
onCreate (): Called then the activity is created. Used to initialize the activity, for
example create the user interface.
onStart ():called when activity is becoming visible to the user.
onResume (): Called if the activity get visible again and the user starts interacting
with the activity again. Used to initialize fields, register listeners, bind
to services, etc.
onPause (): Called once another activity gets into the foreground. Always called
before the activity is not visible anymore. Used to release resources or
save application data. For example you unregister listeners, intent
receivers, unbind from services or remove system service listeners.
onStop (): Called once the activity is no longer visible. Time or CPU intensive shutdown
operations, such as writing information to a database should be down in the onStop() method.
This method is guaranteed to be called as
of API 11.
onDestroy (): called before the activity is destroyed.
d) Explain the steps to deploy app on Google Play Store. 4M
Ans Step 1: Create a Developer Account 4 M for all

Before you can publish any app on Google Play, you need to create a Developer Account. You steps
can easily sign up for one using your existing Google Account. You’ll need to pay a one-time
registration fee of $25 using your international credit or debit card. It can take up to 48 hours
for your registration to be fully processed.
Step 2: Plan to Sell? Link Your Merchant Account

If you want to publish a paid app or plan to sell in-app purchases, you need to create a payments
center profile, i.e. a merchant account. A merchant account will let you manage your app sales
and monthly payouts, as well as analyze your sales reports right in your Play Console.
Step 3: Create an App

After creating application by clicking on ‘Create Application'. Here you have to select your
app’s default language from the drop-down menu and then type in a title for your app. The title
of your app will show on Google Play after you’ve published.
Step 4: Prepare Store Listing

Before you can publish your app, you need to prepare its store listing. These are all the details
that will show up to customers on your app’s listing on Google Play. You not necessarily
complete it at once, you can always save a draft and revisit it later when you’re ready to publish.
The information required for your store listing is divided into several categories such as
Product Details containing title, short and full description of the app, your app’s title and
description should be written with a great user experience in mind. Use the right keywords, but
don’t overdo it. Make sure your app doesn’t come across as spam-y or promotional, or it will
risk getting suspended on the Play Store.
Page No: 9 | 41

lOMoARcPSD|24721702

(Autonomous)
__________________________________________________________________________________________________
Graphic Assets where you can add screenshots, images, videos, promotional graphics, and
icons that showcase your app’s features and functionality.
Languages & Translations, Categorization where in category can be selected to which your
app belong to. Contact Details, Privacy Policy for apps that request access to sensitive user
data or permissions, you need to enter a comprehensive privacy policy that effectively discloses
how your app collects, uses, and shares that data.
Step 5: Upload APK to an App Release

Finally upload your app, by uploading APK file. Before you upload APK, you need to create
an app release. You need to select the type of release you want to upload your first app version
to. You can choose between an internal test, a closed test, an open test, and a production release.
The first three releases allow you to test out your app among a select group of users before you
make it go live for everyone to access.
This is a safer option because you can analyze the test results and optimize or fix your app
accordingly if you need to before rolling it out to all users.
Once you create a production release, your uploaded app version will become accessible to
everyone in the countries you choose to distribute it in and click on ‘Create release.’
Step 6: Provide an Appropriate Content Rating

If you don’t assign a rating to your app, it will be listed as ‘Unrated’. Apps that are ‘Unrated’
may get removed from Google Play.
To rate your app, you need to fill out a content rating questionnaire An appropriate content
rating will also help you get to the right audience, which will eventually improve your
engagement rates.
Step 7: Set Up Pricing & Distribution

Before you can fill out the details required in this step, you need to determine your app’s
monetization strategy. Once you know how your app is going to make money, you can go ahead
and set up your app as free or paid.
You can always change your app from paid to free later, but you cannot change a free app to
paid. For that, you’ll need to create a new app and set its price.
Step 8: Rollout Release to Publish Your App

The final step involves reviewing and rolling out your release after making sure you’ve taken
care of everything else.
Before you review and rollout your release, make sure the store listing, content rating, and
pricing and distribution sections of your app each have a green check mark next to them.
Once you’re sure about the correctness of the details, select your app and navigate to ‘Release
management’ – ‘App releases.’ You can always opt for reviews by clicking on ‘Review’ to be
taken to the ‘Review and rollout release’ screen. Here, you can see if there are any issues or
warnings you might have missed out on.
Finally, select ‘Confirm rollout.’ This will also publish your app to all users in your target
countries on Google Play.
Page No: 10 | 41

lOMoARcPSD|24721702

(Autonomous)
__________________________________________________________________________________________________
a) Explain the fundamentals of Ul design in detail. 4M
Ans 1. Views: 1 M for

• The basic building block for user interface in Android is a View, which is created from the each
View class and occupies a rectangular area on the screen and is responsible for drawing and
event handling.
• Views are the base class for all visual interface elements (commonly known as controls or
widgets). All user interface UI controls, including the layout classes, are derived from View.
• A View is an object/widget that draws something on the sreen by the help of user interact.
• Examples of widgets are buttons, text boxes, labels etc.
2. View Groups:
• The ViewGroup is a subclass of View and provides invisible container that hold other Views
or other ViewGroups and define their layout properties.
• View groups are extensions of the View class that can contain multiple child Views. In order
to Extend the ViewGroup class to create compound controls made up of interconnected child
views.
• A ViewGroup provides the layout in which we can order the appearance and sequence of
views.
Examples of ViewGroup are FrmaeLayout, LineourLayout etc.
3. Fragments:
• Fragments represents a portion of user interface in an Activity. Fragments, introduced in
Android 3.0 which uses API level 11, are used to encapsulate portions of your UI. This
encapsulation makes fragments particularly useful when optimizing our UI layouts for different
screen sizes and creating reusable user interface (UI) elements.
• Each Fragment includes its own user interface (UI) layout and receives the related input events
but is tightly bound to the activity into which each must be embedded. Fragments are similar
to UI view controller in iPhone development.
4. Activities:
• Activities dictate the UI and handle the user interaction to the smart phone screen. Activities
represent a single screen that user interact.
• Activities are the Android equivalent of Forms in traditional windows desktop development.
To display a UI we assign a View (Usually a layout or Fragment) to an Activity
b) Write a program to display a rectangular progress bar. 4M
Ans Xml File: xml file

<?xml version="1.0" encoding="utf-8"?> 2M,
<RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android"
xmlns:tools="http://schemas.android.com/tools" java file 2
android:layout_width="match_parent" M
android:layout_height="match_parent"
tools:context=".MainActivity">
Page No: 11 | 41

lOMoARcPSD|24721702

(Autonomous)
__________________________________________________________________________________________________
<ProgressBar
android:id="@+id/progressBar"
style="@android:style/Widget.ProgressBar.Horizontal"
android:layout_width="match_parent"
android:layout_height="wrap_content"
android:layout_alignParentLeft="true"
android:layout_alignParentTop="true"
android:layout_marginLeft="20dp"
android:layout_marginRight="20dp"
android:layout_marginTop="20dp"
android:indeterminate="false"
android:max="100"
android:minHeight="50dp"
android:minWidth="200dp"
android:progress="1" />
<TextView
android:id="@+id/textView"
android:layout_width="wrap_content"
android:layout_alignLeft="@+id/progressBar"
android:layout_below="@+id/progressBar"/>
</RelativeLayout>
Java file:
package in.edu.vpt.progressbar;
import androidx.appcompat.app.AppCompatActivity;
import android.os.Bundle;
import android.os.Handler;
import android.os.Looper;
import android.widget.ProgressBar;
import android.widget.TextView;
public class MainActivity extends AppCompatActivity {
private ProgressBar progressBar;
private int progressStatus = 0;
private TextView textView;
@Override
protected void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
setContentView(R.layout.activity_main);
progressBar = (ProgressBar) findViewById(R.id.progressBar);
textView = (TextView) findViewById(R.id.textView);
// Start long running operation in a background thread
new Thread(new Runnable() {
public void run() {
Page No: 12 | 41

lOMoARcPSD|24721702

(Autonomous)
__________________________________________________________________________________________________
while (progressStatus < 100) {
progressStatus += 1;
new Handler(Looper.getMainLooper()).post(new Runnable() {
public void run() {
progressBar.setProgress(progressStatus);
textView.setText(progressStatus+"/"+progressBar.getMax());
}
});
try {
// Sleep for 200 milliseconds.
Thread.sleep(200);
} catch (InterruptedException e) {
e.printStackTrace();
}
}
}
}).start();
}
}
c) Explain Android system architecture in detail. 4M
Ans Diagram
2 M,
Explanation
2M
1. Applications:
• The top layer of android architecture is Applications. The native and third party applications
like Contacts, Email, Music, Gallery, Clock, Games, etc. whatever we will build those will be
installed on this layer only.
Page No: 13 | 41

lOMoARcPSD|24721702

(Autonomous)
__________________________________________________________________________________________________
• The application layer runs within the Android run time using the classes and services made
available from the application framework.
2. Application Framework:
• The Application Framework provides the classes used to create an Android application. It also
provides a generic abstraction for hardware access and manages the user interface and
application resources.
• It basically provides the services through which we can create the particular class and make
that class helpful for the Applications creation.
• The application framework includes services like telephony service, location services,
notification manager, NFC service, view system, etc. which we can use for application
development as per our requirements.
3. Android Runtime:
• Android Runtime environment is an important part of Android rather than an internal part and
it contains a components like core libraries and the Dalvik virtual machine.
• The Android run time is the engine that powers our applications along with the libraries and
it forms the basis for the application framework.
(i) Dalvik Virtual Machine (DVM) is a register-based virtual machine like Java Virtual
Machine (JVM).
It is specially designed and optimized for android to ensure that a device can run multiple
instances efficiently. It relies on the Linux kernel for threading and low-level memory
management.
(ii) The core libraries in android runtime will enable us to implement an android applications
using standard JAVA programming language.
4. Platform Libraries:
• The Platform Libraries includes various C/C++ core libraries and Java based libraries such as
SSL, libc, Graphics, SQLite, Webkit, Media, Surface Manger, OpenGL etc. to provide a
support for android development.
5. Linux Kernel:
• Linux Kernel is a bottom layer and heart of the android architecture. It is heart of Android
architecture that exists at the root of android architecture and contains all the low-level device
drivers for the various hardware components of an Android device.
• Linux Kernel is responsible for device drivers, power management, memory management,
device management and resource access. It manage all the drivers such as display drivers,
camera drivers, Bluetooth drivers, audio drivers, memory drivers, etc. which are mainly
required for the android device during the runtime.
• The Linux Kernel will provide an abstraction layer between the device hardware and the
remainder of the stack. It is responsible for memory management, power management, device
management, resource access, etc.
d) Explain the procedure of Geo-coding and reverse Geo-coding. 4M
Ans Geo-Coding: geocoding 2

• If we know the latitude and longitude of a location, we can find out its address using a process M
known as Geocoding. Google Maps in Android supports this via the Geocoder class.
Page No: 14 | 41

lOMoARcPSD|24721702

(Autonomous)
__________________________________________________________________________________________________
• The following code shows how we can find out the address of a location we have just touched and
using the getFromLocation() method: reverse
classMapOverlay extends com.google.android.maps.Overlay geocoding 2
M
{
@Override
publicboolean draw(Canvas canvas, MapViewmapView,
boolean shadow, long when)
{
//...
}
@Override
publicbooleanonTouchEvent(MotionEvent event, MapViewmapView)
{
//---when user lifts his finger---
if (event.getAction() == 1) {
GeoPoint p = mapView.getProjection().fromPixels(
(int) event.getX(),
(int) event.getY());
Geocoder geoCoder = new Geocoder(
getBaseContext(), Locale.getDefault());
try {
List<Address> addresses = geoCoder.getFromLocation(
p.getLatitudeE6() / 1E6,
p.getLongitudeE6() / 1E6, 1);
String add = "";
if (addresses.size() > 0)
{
for (inti=0; i<addresses.get(0).getMaxAddressLineIndex();
i++)
add += addresses.get(0).getAddressLine(i) + "n";
}
Toast.makeText(getBaseContext(), add, Toast.LENGTH_SHORT).show();
}
catch (IOException e) {
}
return true;
}
else
return false;
}
}
Page No: 15 | 41

lOMoARcPSD|24721702

(Autonomous)
__________________________________________________________________________________________________
Reverse-geocoding:
If we know the address of a location but want to know its latitude and longitude, we can do so
via reverse-Geocoding. Again, we can use the Geocoder class for this purpose.
• The following code shows how we can find the exact location of the Empire State Building
by using the getFromLocationName() method:
Geocoder geoCoder = new Geocoder(this, Locale.getDefault());
try {
List<Address> addresses = geoCoder.getFromLocationName(
"empire state building", 5);
String add = "";
if (addresses.size() > 0) {
p = new GeoPoint(
(int) (addresses.get(0).getLatitude() * 1E6),
(int) (addresses.get(0).getLongitude() * 1E6));
mc.animateTo(p);
mapView.invalidate();
}
} catch (IOException e) {
}
Once. the location is found, the above code navigates the map to the location.
e) Develop an application to send and receive SMS (Write only Java and 4M
permission tag in manifest file).
Ans Permissions and <receiver> tag required in AndroidManifest.xml Manifest
<uses-permission android:name="android.permission.RECEIVE_SMS" /> File:1M
<uses-permission android:name="android.permission.SEND_SMS"/>
<uses-permission android:name="android.permission.READ_SMS"/> Java Code:
<uses-permission android:name="android.permission.WRITE_SMS"/> 3M
<receiver
android:name=".SmsReceiver"
android:enabled="true"
android:exported="true">
<intent-filter>
<action android:name="android.provider.Telephony.SMS_RECEIVED" />
</intent-filter>
</receiver>
MainActivity.java
(Cosidering appropriate layout file with 2 edit text boxes namely for phone number,
message and a button for sending sms)
package com.example.testreceivesms;
import androidx.core.app.ActivityCompat;
Page No: 16 | 41

lOMoARcPSD|24721702

(Autonomous)
__________________________________________________________________________________________________
import androidx.core.content.ContextCompat;
import android.Manifest;
import android.content.IntentFilter;
import android.content.pm.PackageManager;
import android.telephony.SmsManager;
import android.view.View;
import android.widget.Button;
import android.widget.EditText;
import android.widget.Toast;

SmsReceiver sms= new SmsReceiver();
EditText et1,et2;
Button b1;
@Override
protected void onCreate (Bundle savedInstanceState) {
et1=findViewById(R.id.etPhno);
et2=findViewById(R.id.etmsg);
b1=findViewById(R.id.btnSms);
if(ContextCompat.checkSelfPermission(MainActivity.this,Manifest.permission.SEND_S
MS)!=
PackageManager.PERMISSION_GRANTED)
{
ActivityCompat.requestPermissions(MainActivity.this,new
String[]{Manifest.permission.SEND_SMS},100);
}
b1.setOnClickListener(new View.OnClickListener() {
@Override
public void onClick(View v) {
try {
String phno= et1.getText().toString();
String msg=et2.getText().toString();
SmsManager smsManager= SmsManager.getDefault();
smsManager.sendTextMessage(phno,null,msg,null,null);
Toast.makeText(MainActivity.this,"Sms sent successfully",
Toast.LENGTH_LONG).show();
}
catch(Exception e)
{
Toast.makeText(MainActivity.this,"Sms failed to send... try again",
}
}
});
}
@Override
Page No: 17 | 41

lOMoARcPSD|24721702

(Autonomous)
__________________________________________________________________________________________________
protected void onStart() {
super.onStart();
IntentFilter filter=new IntentFilter("android.provider.Telephony.SMS_RECEIVED");
registerReceiver(sms,filter);
}
@Override
protected void onStop() {
super.onStop();
unregisterReceiver(sms);
}
}
SmsReceiver.java
package com.example.testreceivesms;
import android.content.BroadcastReceiver;
import android.content.Context;
import android.content.Intent;
import android.telephony.SmsMessage;
public class SmsReceiver extends BroadcastReceiver {

SmsReceiver(){}
@Override
public void onReceive(Context context, Intent intent) {
Bundle bundle = intent.getExtras();
if (bundle != null) {
// Retrieve the SMS Messages received
Object[] sms = (Object[]) bundle.get("pdus");
// For every SMS message received

for (int i=0; i < sms.length; i++) {
// Convert Object array
SmsMessage smsMessage = SmsMessage.createFromPdu((byte[]) sms[i]);
String phone = smsMessage.getOriginatingAddress();

String message = smsMessage.getMessageBody().toString();
Toast.makeText(context, “Received from “+ phone + ": " + message,

Toast.LENGTH_SHORT).show();
}
}
}
}
5. Attempt any TWO of the following: 12 M
Page No: 18 | 41

lOMoARcPSD|24721702

(Autonomous)
__________________________________________________________________________________________________
a) Develop a program to send and receive an Email. 6M
Ans Program to send Email Any correct

activity_main.xml logic
<?xml version="1.0" encoding="utf-8"?> program
<RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android" should be
xmlns:tools="http://schemas.android.com/tools" considered,
android:layout_width="match_parent" 3M for
android:layout_height="match_parent" send logic,
tools:context=".MainActivity"> 3M for
receive
<EditText logic
android:id="@+id/editText1"
android:layout_alignParentRight="true"
android:layout_marginRight="22dp" />
<EditText
android:layout_below="@+id/editText1"
android:layout_alignLeft="@+id/editText1"
android:layout_marginTop="20dp" />
<EditText
android:layout_marginTop="30dp" />
<TextView
android:id="@+id/textView1"
android:layout_alignBaseline="@+id/editText1"
android:layout_alignBottom="@+id/editText1"
android:text="Send To:"
android:textColor="#0F9D58" />
<TextView
Page No: 19 | 41

lOMoARcPSD|24721702

(Autonomous)
__________________________________________________________________________________________________
android:text="Email Subject:"
<TextView
android:text="Email Body:"
<Button
android:id="@+id/button"
android:text="Send email!!" />
</RelativeLayout>
MainActivity.java
// define objects for edit text and button
Button button;
EditText sendto, subject, body;
@Override
// Getting instance of edittext and button

sendto = findViewById(R.id.editText1);
subject = findViewById(R.id.editText2);
body = findViewById(R.id.editText3);
button = findViewById(R.id.button);
Page No: 20 | 41

lOMoARcPSD|24721702

(Autonomous)
__________________________________________________________________________________________________
// attach setOnClickListener to button with Intent object define in it
button.setOnClickListener(view -> {
String emailsend = sendto.getText().toString();
String emailsubject = subject.getText().toString();
String emailbody = body.getText().toString();
// define Intent object with action attribute as ACTION_SEND

Intent intent = new Intent(Intent.ACTION_SEND);
// add three fields to intent using putExtra function

intent.putExtra(Intent.EXTRA_EMAIL, new String[]{emailsend});
intent.putExtra(Intent.EXTRA_SUBJECT, emailsubject);
intent.putExtra(Intent.EXTRA_TEXT, emailbody);
// set type of intent

intent.setType("message/rfc822");
// startActivity with intent with chooser as Email client using

createChooser function
startActivity(Intent.createChooser(intent, "Choose an Email client :"));
});
}
}
Program to receive Email

(Note: Receiving email is not the service of Android OS, instead it uses some third party
applicaton like Gmail, so instead of receiving email in android app, a code which broadcasts
message if email comes using broadcast receiver or any relevant logic can be considered.)
MainActivity.java
package com.example.myemailprog;
import android.content.IntentFilter;

GmailReceiver gml;
IntentFilter intf;
@Override
gml = new GmailReceiver();
intf = new IntentFilter("android.intent.action.VIEW");
}
@Override
protected void onResume() {
super.onResume();
Page No: 21 | 41

lOMoARcPSD|24721702

(Autonomous)
__________________________________________________________________________________________________
registerReceiver(gml, intf);
}
@Override
protected void onDestroy() {
super.onDestroy();
unregisterReceiver(gml);
}
}
Gmailrerciever..java
package com.example.myemailprog;
import android.app.Notification;
import android.app.NotificationManager;
import android.app.PendingIntent;
import android.content.BroadcastReceiver;
import android.content.res.Resources;
import android.graphics.BitmapFactory;
public class GmailReceiver extends BroadcastReceiver

{
@Override
public void onReceive(Context context, Intent intent)
{
Toast.makeText(context, "Email Received", Toast.LENGTH_LONG).show();
}
}
AndroidManifest.xml
<?xml version="1.0" encoding="utf-8"?>
<manifest xmlns:android="http://schemas.android.com/apk/res/android"
package="com.example.myemailprog">
<application
android:allowBackup="true"
android:icon="@mipmap/ic_launcher"
android:label="@string/app_name"
android:roundIcon="@mipmap/ic_launcher_round"
android:supportsRtl="true"
android:theme="@style/Theme.MyEmailProg">
<activity
android:name=".MainActivity"
android:exported="true">
<intent-filter>
<action android:name="android.intent.action.MAIN" />
<category android:name="android.intent.category.LAUNCHER" />
Page No: 22 | 41

lOMoARcPSD|24721702

(Autonomous)
__________________________________________________________________________________________________
</intent-filter>
</activity>
<receiver android:name="GmailReceiver"
android:exported="false">
<intent-filter>
<action android:name="android.intent.action.PROVIDER_CHANGED"
android:priority="-10">
</action>
<action android:name="android.intent.action.VIEW" />
<data android:scheme="content" android:host="gmail-ls"
android:pathPattern="/unread/.*">
</data>
</intent-filter>
</receiver>
</application>
</manifest>
b) Develop a program for providing bluetooth connectivity. 6M
Ans activity_main.xml Layout file

<RelativeLayout xmlns:androclass="http://schemas.android.com/apk/res/android" : 2M
xmlns:tools="http://schemas.android.com/tools"
android:layout_width="match_parent" Java File :
android:layout_height="match_parent" 3M
tools:context=".MainActivity" >
Manifest
file : 1M
<TextView android:text=""
android:id="@+id/out"
android:layout_height="wrap_content">
</TextView>
<Button
android:id="@+id/button1"
android:text="TURN_ON" />
<Button
android:layout_alignLeft="@+id/button1"
android:layout_below="@+id/button1"
android:text="DISCOVERABLE" />
Page No: 23 | 41

lOMoARcPSD|24721702

(Autonomous)
__________________________________________________________________________________________________
<Button
android:layout_alignLeft="@+id/button2"
android:layout_below="@+id/button2"
android:text="TURN_OFF" />
</RelativeLayout>
AndroidManifest.xml
<manifest xmlns:androclass="http://schemas.android.com/apk/res/android"
package="com.example.bluetooth"
android:versionCode="1"
android:versionName="1.0" >
<uses-sdk
android:minSdkVersion="8"
android:targetSdkVersion="16" />
<uses-permission android:name="android.permission.BLUETOOTH" />
<uses-permission android:name="android.permission.BLUETOOTH_ADMIN" />
<application
android:icon="@drawable/ic_launcher"
android:theme="@style/AppTheme" >
<activity
android:name="com.example.bluetooth.MainActivity"
android:label="@string/app_name" >
<intent-filter>
</intent-filter>
</activity>
</application>
</manifest>
MainActivity.java
package com.example.bluetooth;
import android.app.Activity;
import android.view.Menu;
import android.app.Activity;
import android.bluetooth.BluetoothAdapter;
Page No: 24 | 41

lOMoARcPSD|24721702

(Autonomous)
__________________________________________________________________________________________________
import android.util.Log;
public class MainActivity extends Activity {

private static final int REQUEST_ENABLE_BT = 0;
private static final int REQUEST_DISCOVERABLE_BT = 0;
@Override
final TextView out=(TextView)findViewById(R.id.out);
final Button button1 = (Button) findViewById(R.id.button1);
final BluetoothAdapter mBluetoothAdapter = BluetoothAdapter.getDefaultAdapter();
if (mBluetoothAdapter == null) {
out.append("device not supported");
}
button1.setOnClickListener(new View.OnClickListener() {
public void onClick(View v) {
if (!mBluetoothAdapter.isEnabled()) {
Intent enableBtIntent = new Intent(BluetoothAdapter.ACTION_REQUEST_ENABLE);
startActivityForResult(enableBtIntent, REQUEST_ENABLE_BT);
}
}
});
@Override
public void onClick(View arg0) {
if (!mBluetoothAdapter.isDiscovering()) {
//out.append("MAKING YOUR DEVICE DISCOVERABLE");
Toast.makeText(getApplicationContext(), "MAKING YOUR DEVICE DISCOVERA
BLE",
Toast.LENGTH_LONG);
Intent enableBtIntent = new Intent(BluetoothAdapter.ACTION_REQUEST_DISCOVER

ABLE);
startActivityForResult(enableBtIntent, REQUEST_DISCOVERABLE_BT);
}
}
});
@Override
public void onClick(View arg0) {
Page No: 25 | 41

lOMoARcPSD|24721702

(Autonomous)
__________________________________________________________________________________________________
mBluetoothAdapter.disable();
//out.append("TURN_OFF BLUETOOTH");
Toast.makeText(getApplicationContext(), "TURNING_OFF BLUETOOTH", Toast.LENGT
H_LONG);
}
});
}
@Override
public boolean onCreateOptionsMenu(Menu menu) {
// Inflate the menu; this adds items to the action bar if it is present.
getMenuInflater().inflate(R.menu.activity_main, menu);
return true;
}
}
c) Develop a program to implement 6M
i) List view of 5 items

ii) Grid view of 4 x 4 items
iii) Image view.
Ans <?xml version="1.0" encoding="utf-8"?> Correct

<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" Logics for
xmlns:app="http://schemas.android.com/apk/res-auto" ListView :
android:layout_width="match_parent" 2M
android:layout_height="match_parent"
GridView :
android:orientation="vertical"
2M
ImageView
<ListView : 2M
android:id="@+id/sample_list"
android:layout_height="wrap_content" >
</ListView>
<GridView
android:id="@+id/gridview1"
android:layout_width="fill_parent"
android:columnWidth="50dp"
android:gravity="center"
android:numColumns="auto_fit"
android:stretchMode="columnWidth" >
</GridView>
<ImageView
android:id="@+id/full_logo"
Page No: 26 | 41

lOMoARcPSD|24721702

(Autonomous)
__________________________________________________________________________________________________
app:srcCompat="@drawable/android_logo" />
</LinearLayout>
Placed image that has to be displayed in drawable folder
package in.msbte.controls_exam_ques;
import android.widget.ArrayAdapter;
import android.widget.GridView;
import android.widget.ListView;

String[] sampleArray = {"Item 1","Item 2","Item 3","Item 4", "Item 5"};
GridView gridView;
static final String[] alphabets = new String[]{
"A", "B", "C", "D", "E",
"F", "G", "H", "I", "J",
"K", "L", "M", "N", "O",
"P", "Q", "R", "S", "T",
"U", "V", "W", "X", "Y", "Z"
};
ArrayAdapter adapter, adapter1;
@Override
//List View
adapter = new ArrayAdapter<String>(this, R.layout.simple_item, sampleArray);
ListView listView = (ListView) findViewById(R.id.sample_list);
listView.setAdapter(adapter);
//Grid View
gridView = (GridView) findViewById(R.id.gridview1);
adapter1 = new ArrayAdapter<String>(this, R.layout.simple_item, alphabets);
gridView.setAdapter(adapter1);
}
}
6. Attempt any TWO of the following: 12 M
Page No: 27 | 41

lOMoARcPSD|24721702

(Autonomous)
__________________________________________________________________________________________________
a) Develop an application to store customer's details like, customer-id, customer-name, 6M
mobile number, address, pin-code and retrieve customer information using customer-id
in SQLite databases.
(Any other relevant logic can be considered)
Ans activity_main.xml Layout File
<?xml version="1.0" encoding="utf-8"?> : 1M
<RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android" Java File :
android:layout_width="match_parent" Correct
android:layout_height="match_parent" Logics for
Create
table : 1M
<TextView Insertion of
android:text="Insert Customer Details" record : 2M
android:layout_width="wrap_content" Retrival of
android:layout_height="wrap_content" data : 2M
android:layout_centerHorizontal="true"
android:id="@+id/textView"
android:textSize="20dp"
android:textColor="#000000"/>
<EditText
android:hint="ID"
android:id="@+id/editid"
android:layout_below="@+id/textView"/>
<EditText
android:hint="Name"
android:id="@+id/editname"
android:layout_below="@+id/editid"/>
<EditText
android:hint="Mobile No."
android:id="@+id/editmobile"
android:layout_below="@+id/editname"/>
Page No: 28 | 41

lOMoARcPSD|24721702

(Autonomous)
__________________________________________________________________________________________________
<EditText
android:hint="Address"
android:lines="3"
android:id="@+id/editaddress"
android:layout_below="@+id/editmobile"/>
<EditText
android:hint="Pin Code"
android:id="@+id/editpincode"
android:layout_below="@+id/editaddress"/>
<Button
android:text="Insert Data"
android:layout_below="@+id/editpincode"
android:id="@+id/button" />
<TextView
android:text="Search Customer Details"
android:textSize="20dp"
android:layout_below="@+id/button"
android:textColor="#000000"/>
<EditText
android:hint="Enter ID"
android:id="@+id/editsearchid"
android:layout_below="@+id/textView1"/>
Page No: 29 | 41

lOMoARcPSD|24721702

(Autonomous)
__________________________________________________________________________________________________
<Button
android:text="Search Data"
android:layout_below="@+id/editsearchid"
android:id="@+id/button1" />
</RelativeLayout>
MainActivity.java
package in.msbte.database;
import android.database.Cursor;
import android.database.sqlite.SQLiteDatabase;

SQLiteDatabase sqLiteDatabaseObj;
EditText editTextID, editTextName, editMobileNo, editAddress, editPincode,
editSearchid;
String cid, cname, cmobile, caddress, cpincode, sql_query, sid;
Button EnterData, SearchData;
@Override
EnterData = (Button)findViewById(R.id.button);
SearchData = (Button)findViewById(R.id.button1);
editTextID = (EditText)findViewById(R.id.editid);
editTextName = (EditText)findViewById(R.id.editname);
editMobileNo = (EditText)findViewById(R.id.editmobile);
editAddress = (EditText)findViewById(R.id.editaddress);
editPincode = (EditText)findViewById(R.id.editpincode);
editSearchid = (EditText)findViewById(R.id.editsearchid);
EnterData.setOnClickListener(new View.OnClickListener() {
@Override
Page No: 30 | 41

lOMoARcPSD|24721702

(Autonomous)
__________________________________________________________________________________________________
public void onClick(View view) {
sqLiteDatabaseObj = openOrCreateDatabase("AndroidJSonDataBase",
Context.MODE_PRIVATE, null);
sqLiteDatabaseObj.execSQL("CREATE TABLE IF NOT EXISTS
AndroidJSonTable(id INTEGER PRIMARY KEY AUTOINCREMENT NOT NULL, cid
VARCHAR, name VARCHAR, mobile VARCHAR, address VARCHAR, pincode
VARCHAR);");
cid = editTextID.getText().toString();
cname = editTextName.getText().toString() ;
cmobile = editMobileNo.getText().toString();
caddress = editAddress.getText().toString();
cpincode = editPincode.getText().toString();
sql_query = "INSERT INTO AndroidJSonTable (cid, name, mobile, address,
pincode) VALUES('"+cid+"', '"+cname+"', '"+cmobile+"', '"+caddress+"', '"+cpincode+"');";
sqLiteDatabaseObj.execSQL(sql_query);
Toast.makeText(getApplicationContext(), "Data Inserted Successfully",
}
});
SearchData.setOnClickListener(new View.OnClickListener() {
@Override
sid = editSearchid.getText().toString();
Cursor cursor = sqLiteDatabaseObj.rawQuery( "select * from AndroidJSonTable
where cid="+sid+"", null );
StringBuffer buffer= new StringBuffer();
while (cursor.moveToNext())
{
String cid =cursor.getString(1);
String name =cursor.getString(2);
String mob =cursor.getString(3);
String addr =cursor.getString(4);
String pcode =cursor.getString(5);
buffer.append(cid+ " " + name + " " + mob +" " + addr +" " + pcode +"
\n");
Toast.makeText(getApplicationContext(), buffer,
} }); } }
b) Write a program to find the direction from user's current location to MSBTE, 6M
Bandra. (Write only Java and manitest file).
(Note : Any other relevant logic to get the required output can also be considered.)
Page No: 31 | 41

lOMoARcPSD|24721702

(Autonomous)
__________________________________________________________________________________________________
Ans AndroidManifest.xml Manifest
file :2M
<manifest xmlns:android="http://schemas.android.com/apk/res/android" Java File :
package="com.example.msbte.google_map_currentlocationroute"> 4M
<uses-permission android:name="android.permission.INTERNET" />

<uses-permission android:name="android.permission.ACCESS_FINE_LOCATION" />
<uses-permission android:name="android.permission.ACCESS_COARSE_LOCATION"
/>
<application
android:icon="@mipmap/ic_launcher"
android:roundIcon="@mipmap/ic_launcher_round"
android:supportsRtl="true"
android:theme="@style/AppTheme">
<meta-data
android:name="com.google.android.gms.version"
android:value="@integer/google_play_services_version" />
<meta-data
android:name="com.google.android.geo.API_KEY"
android:value="@string/google_maps_key" />
<activity android:name=".MainActivity">
<intent-filter>

</intent-filter>
</activity>
</application>
</manifest>
MainActivity.java
import android.Manifest;
import android.content.DialogInterface;
import android.content.pm.PackageManager;
import android.location.Location;
import android.net.Uri;
import android.provider.Settings;
import android.support.v4.app.ActivityCompat;
import android.support.v7.app.AlertDialog;
import android.support.v7.app.AppCompatActivity;
import android.util.Log;
Page No: 32 | 41

lOMoARcPSD|24721702

(Autonomous)
__________________________________________________________________________________________________
import com.google.android.gms.common.ConnectionResult;
import com.google.android.gms.common.api.GoogleApiClient;
import com.google.android.gms.location.LocationRequest;
import com.google.android.gms.location.LocationServices;
import com.google.android.gms.maps.CameraUpdateFactory;
import com.google.android.gms.maps.GoogleMap;
import com.google.android.gms.maps.MapFragment;
import com.google.android.gms.maps.OnMapReadyCallback;
import com.google.android.gms.maps.model.CameraPosition;
import com.google.android.gms.maps.model.LatLng;
import com.google.android.gms.maps.model.MarkerOptions;
import com.google.android.gms.maps.model.Polyline;
import com.google.android.gms.maps.model.PolylineOptions;
import com.karumi.dexter.Dexter;
import com.karumi.dexter.MultiplePermissionsReport;
import com.karumi.dexter.PermissionToken;
import com.karumi.dexter.listener.DexterError;
import com.karumi.dexter.listener.PermissionRequest;
import com.karumi.dexter.listener.PermissionRequestErrorListener;
import com.karumi.dexter.listener.multi.MultiplePermissionsListener;
import java.util.List;
public class MainActivity extends AppCompatActivity implements

GoogleApiClient.ConnectionCallbacks, GoogleApiClient.OnConnectionFailedListener,
com.google.android.gms.location.LocationListener , OnMapReadyCallback,
TaskLoadedCallback{
//variables for map and route
private GoogleMap mMap;

private MarkerOptions place1, place2;
Button getDirection;
private Polyline currentPolyline;
private MapFragment mapFragment;
private boolean isFirstTime = true;
//variables for current location

private static final String TAG = "MainActivity";
private TextView tvLocation;

private GoogleApiClient mGoogleApiClient;
private Location mLocation;
private LocationRequest mLocationRequest;
private com.google.android.gms.location.LocationListener listener;
private long UPDATE_INTERVAL = 2 * 1000; /* 10 secs */
Page No: 33 | 41

lOMoARcPSD|24721702

(Autonomous)
__________________________________________________________________________________________________
private long FASTEST_INTERVAL = 2000; /* 2 sec */
@Override
//code for getting current location

requestMultiplePermissions();
tvLocation = (TextView) findViewById((R.id.tv));
mGoogleApiClient = new GoogleApiClient.Builder(this)
.addConnectionCallbacks(this)
.addOnConnectionFailedListener(this)
.addApi(LocationServices.API)
.build();
}
//code for drawing route
@Override
public void onMapReady(GoogleMap googleMap) {
mMap = googleMap;
mMap.clear();
Log.d("mylog", "Added Markers");
mMap.addMarker(place1);
mMap.addMarker(place2);
CameraPosition googlePlex = CameraPosition.builder()

.target(new LatLng(22.7739,71.6673))
.zoom(7)
.bearing(0)
.tilt(45)
.build();
mMap.animateCamera(CameraUpdateFactory.newCameraPosition(googlePlex), 5000,
null);
}
private String getUrl(LatLng origin, LatLng dest, String directionMode) {

// Origin of route
String str_origin = "origin=" + origin.latitude + "," + origin.longitude;
// Destination of route
String str_dest = "destination=" + dest.latitude + "," + dest.longitude;
// Mode
String mode = "mode=" + directionMode;
// Building the parameters to the web service
String parameters = str_origin + "&" + str_dest + "&" + mode;
// Output format
String output = "json";
Page No: 34 | 41

lOMoARcPSD|24721702

(Autonomous)
__________________________________________________________________________________________________
// Building the url to the web service
String url = "https://maps.googleapis.com/maps/api/directions/" + output + "?" +
parameters + "&key=" + getString(R.string.google_maps_key);
return url;
}
@Override
public void onTaskDone(Object... values) {
if (currentPolyline != null)
currentPolyline.remove();
currentPolyline = mMap.addPolyline((PolylineOptions) values[0]);
}
//runtime permission method
private void requestMultiplePermissions(){

Dexter.withActivity(this)
.withPermissions(
Manifest.permission.ACCESS_FINE_LOCATION,
Manifest.permission.ACCESS_COARSE_LOCATION )
.withListener(new MultiplePermissionsListener() {
@Override
public void onPermissionsChecked(MultiplePermissionsReport report) {
// check if all permissions are granted
if (report.areAllPermissionsGranted()) {
Toast.makeText(getApplicationContext(), "All permissions are granted by
user!", Toast.LENGTH_SHORT).show();
}
// check for permanent denial of any permission

if (report.isAnyPermissionPermanentlyDenied()) {
// show alert dialog navigating to Settings
openSettingsDialog();
}
}
@Override
public void onPermissionRationaleShouldBeShown(List<PermissionRequest>
permissions, PermissionToken token) {
token.continuePermissionRequest();
}
}).
withErrorListener(new PermissionRequestErrorListener() {
@Override
public void onError(DexterError error) {
Toast.makeText(getApplicationContext(), "Some Error! ",
Toast.LENGTH_SHORT).show();
}
})
Page No: 35 | 41

lOMoARcPSD|24721702

(Autonomous)
__________________________________________________________________________________________________
.onSameThread()
.check();
}
private void openSettingsDialog() {

AlertDialog.Builder builder = new AlertDialog.Builder(MainActivity.this);
builder.setTitle("Required Permissions");
builder.setMessage("This app require permission to use awesome feature. Grant them in
app settings.");
builder.setPositiveButton("Take Me To SETTINGS", new
DialogInterface.OnClickListener() {
@Override
public void onClick(DialogInterface dialog, int which) {
dialog.cancel();
Intent intent = new
Intent(Settings.ACTION_APPLICATION_DETAILS_SETTINGS);
Uri uri = Uri.fromParts("package", getPackageName(), null);
intent.setData(uri);
startActivityForResult(intent, 101);
}
});
builder.setNegativeButton("Cancel", new DialogInterface.OnClickListener() {
@Override
public void onClick(DialogInterface dialog, int which) {
dialog.cancel();
}
});
builder.show();
}
//methods for getting current location

@Override
public void onConnected(Bundle bundle) {
if (ActivityCompat.checkSelfPermission(this,
Manifest.permission.ACCESS_FINE_LOCATION) !=
PackageManager.PERMISSION_GRANTED && ActivityCompat.checkSelfPermission(this,
Manifest.permission.ACCESS_COARSE_LOCATION) !=
PackageManager.PERMISSION_GRANTED) {
return;
}
startLocationUpdates();
mLocation = LocationServices.FusedLocationApi.getLastLocation(mGoogleApiClient);
if(mLocation == null){
startLocationUpdates();
}
if (mLocation != null) {
// mLatitudeTextView.setText(String.valueOf(mLocation.getLatitude()));
//mLongitudeTextView.setText(String.valueOf(mLocation.getLongitude()));
Page No: 36 | 41

lOMoARcPSD|24721702

(Autonomous)
__________________________________________________________________________________________________
} else {
Toast.makeText(this, "Location not Detected", Toast.LENGTH_SHORT).show();
} }
@Override
public void onConnectionSuspended(int i) {
Log.i(TAG, "Connection Suspended");
mGoogleApiClient.connect();
}
@Override
public void onConnectionFailed(ConnectionResult connectionResult) {
Log.i(TAG, "Connection failed. Error: " + connectionResult.getErrorCode());
}
@Override
protected void onStart() {
super.onStart();
if (mGoogleApiClient != null) {
mGoogleApiClient.connect();
} }
@Override
protected void onStop() {
super.onStop();
if (mGoogleApiClient.isConnected()) {
mGoogleApiClient.disconnect();
} }
protected void startLocationUpdates() {

// Create the location request
mLocationRequest = LocationRequest.create()
.setPriority(LocationRequest.PRIORITY_HIGH_ACCURACY)
.setInterval(UPDATE_INTERVAL)
.setFastestInterval(FASTEST_INTERVAL);
if (ActivityCompat.checkSelfPermission(this,
Manifest.permission.ACCESS_FINE_LOCATION) !=
PackageManager.PERMISSION_GRANTED && ActivityCompat.checkSelfPermission(this,
Manifest.permission.ACCESS_COARSE_LOCATION) !=
PackageManager.PERMISSION_GRANTED) {
return;
}
LocationServices.FusedLocationApi.requestLocationUpdates(mGoogleApiClient,
mLocationRequest, this);
}
@Override
public void onLocationChanged(Location location) {
String msg = "Updated Location: " +

Double.toString(location.getLatitude()) + "," +
Page No: 37 | 41

lOMoARcPSD|24721702

(Autonomous)
__________________________________________________________________________________________________
Double.toString(location.getLongitude());
tvLocation.setText(String.valueOf(location.getLatitude() +"
"+String.valueOf(location.getLongitude())));
Toast.makeText(this, msg, Toast.LENGTH_SHORT).show();
if(isFirstTime){
//code to draw path on map
getDirection = findViewById(R.id.btnGetDirection);
getDirection.setOnClickListener(new View.OnClickListener() {
@Override
new FetchURL(MainActivity.this).execute(getUrl(place1.getPosition(),
place2.getPosition(), "driving"), "driving");
}
});
place1 = new MarkerOptions().position(new LatLng(location.getLatitude(),

location.getLongitude())).title("Location 1");
place2 = new MarkerOptions().position(new
LatLng(19.021824,72.8662016)).title("MSBTE");
mapFragment = (MapFragment)
getFragmentManager().findFragmentById(R.id.mapNearBy);
mapFragment.getMapAsync(this);
isFirstTime = false;
} }}
c) Develop a simple calculator using relative layout. 6M
Ans activity_main.xml Use of

<?xml version="1.0" encoding="utf-8"?> Relative
<RelativeLayout Layout
xmlns:android="http://schemas.android.com/apk/res/android" with
appropriate
xmlns:app="http://schemas.android.com/apk/res-auto" attributes :
xmlns:tools="http://schemas.android.com/tools" 3M
android:layout_height="match_parent" Logic for
simple
calculator
with basic
<TextView arithmetic
android:id="@+id/heading" operations :
android:layout_width="wrap_content" 3M
android:text=" Calculator"
android:textSize="30dp" />
Page No: 38 | 41

lOMoARcPSD|24721702

(Autonomous)
__________________________________________________________________________________________________
<EditText
android:id="@+id/num1"
android:layout_below="@+id/heading"
android:hint="Enter Number 1"
android:inputType="number" />
<EditText
android:id="@+id/num2"
android:layout_below="@+id/num1"
android:hint="Enter Number 2"
android:inputType="number" />
<TextView
android:id="@+id/result"
android:layout_below="@+id/num2"
android:layout_marginBottom="20dp"
android:text="Result" />
<Button
android:id="@+id/sum"
android:layout_below="@id/result"
android:text="+" />
<Button
android:id="@+id/sub"
android:layout_toRightOf="@id/sum"
android:text="-" />
<Button
Page No: 39 | 41

lOMoARcPSD|24721702

(Autonomous)
__________________________________________________________________________________________________
android:id="@+id/div"
android:layout_toRightOf="@id/sub"
android:text="/" />
<Button
android:id="@+id/mul"
android:layout_toRightOf="@id/div"
android:text="x"/>
</RelativeLayout>
MainActivity.java
package in.msbte.calculator;
public EditText e1, e2;
Button add, sub , mul, div;
TextView t1;
int num1, num2;
@Override
e1 = (EditText) findViewById(R.id.num1);
e2 = (EditText) findViewById(R.id.num2);
t1 = (TextView) findViewById(R.id.result);
add = (Button) findViewById(R.id.sum);
mul = (Button) findViewById(R.id.mul);
div = (Button) findViewById(R.id.div);
sub = (Button) findViewById(R.id.sub);
add.setOnClickListener(new View.OnClickListener() {
Page No: 40 | 41

lOMoARcPSD|24721702

(Autonomous)
__________________________________________________________________________________________________
@Override
num1 = Integer.parseInt(e1.getText().toString());
int sum = num1 + num2;
t1.setText(Integer.toString(sum));
}
});
sub.setOnClickListener(new View.OnClickListener() {
@Override
int sum = num1 - num2;
}
});
mul.setOnClickListener(new View.OnClickListener() {
@Override
int sum = num1 * num2;
}
});
div.setOnClickListener(new View.OnClickListener() {
@Override
int sum = num1 / num2;
}
});
}
}
Page No: 41 | 41

Mad Winter 22 Model Answer

Uploaded by

Copyright:

Available Formats

Mad Winter 22 Model Answer

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Mad Winter 22 Model Answer

Uploaded by

Copyright:

Available Formats

lOMoARcPSD|24721702

Mad Winter 22 - model answer

Diploma in Computer Engineering (Government Polytechnic Thane)

Scan to open on Studocu

Studocu is not sponsored or endorsed by any college or university

MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION

1 Attempt any FIVE of the following: 10 M

a) Define OHA and state goal of OHA. 2M

b) Define Android Virtual Devices (AVD). 2M

Downloaded by Shailesh Koshe ([email protected])

MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION

d) Enlist the elements of UI. 2M

Ans Elements of UI. (1/2 mark

f) Name any four methods to get location data in android. 2M

Ans •float distanceTo(Location dest) (1/2 M for

Downloaded by Shailesh Koshe ([email protected])

MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION

2. Attempt any THREE of the following: 12 M

a) Describe the different features of Android. 4M

b) Explain features of Android SDK. 4M

Downloaded by Shailesh Koshe ([email protected])

MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION

c) Explain the Android security model. 4M

Downloaded by Shailesh Koshe ([email protected])

MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION

Following is the code snippet to set SEND_SMS permissions in manifest file.

 android. permission. BLUETOOTH

3. Attempt any THREE of the following: 12 M

a) Explain data and time picker with its method. 4M

Ans Date Picker: Date picker

Downloaded by Shailesh Koshe ([email protected])

MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION

Downloaded by Shailesh Koshe ([email protected])

MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION

Downloaded by Shailesh Koshe ([email protected])

MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION

Activities have a predefined life-cycle methods as follows:

Downloaded by Shailesh Koshe ([email protected])

MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION

onStart ():called when activity is becoming visible to the user.

onDestroy (): called before the activity is destroyed.

d) Explain the steps to deploy app on Google Play Store. 4M

Ans Step 1: Create a Developer Account 4 M for all

Step 2: Plan to Sell? Link Your Merchant Account

Step 3: Create an App

Step 4: Prepare Store Listing

Downloaded by Shailesh Koshe ([email protected])

MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION

Step 5: Upload APK to an App Release

Step 6: Provide an Appropriate Content Rating

Step 7: Set Up Pricing & Distribution

Step 8: Rollout Release to Publish Your App

Downloaded by Shailesh Koshe ([email protected])

MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION

4. Attempt any THREE of the following: 12 M

a) Explain the fundamentals of Ul design in detail. 4M

Ans 1. Views: 1 M for

Ans Xml File: xml file

Downloaded by Shailesh Koshe ([email protected])