Technical Support and E-Warranty Certificate www.vevor.

com/support

LATHE
USER MANUAL

We continue to be committed to provide you tools with competitive price.

"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
 LATHE

MODEL:MX-S716G

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to
contact us:
[email protected]

This is the original instruction, please read all manual instructions

carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.

-1-
Matters needing attention：

The information contained in this handbook is intended as a guide to the

operation of these machines and does not form part of any
contract. The data it contains has been obtained from the
machine manufacturer and from other sources. Whilst every effort has
been made to ensure the accuracy of these transcriptions it would be
impracticable to verify each and every item. Furthermore, development of
the machine may mean that the equipment supplied may differ in detail
from the descriptions herein. The responsibility therefore lies with the user
to satisfy himself that the equipment or process described is suitable for
the purpose intended.

Quality assurance：

We will make every effort to ensure the quality of our products, and we
promise to consumers that we will guarantee our products for one year,
except for machine damage caused by improper operation of customers,
and accidents resulting therefrom, or abnormal wear and damage caused
by lack of maintenance.
In order to fulfill the warranty commitment, the product or part with quality
problems, please return to us for verification, postage prepaid. Goods sent
back should be accompanied by a note of the date of purchase and a
written explanation of the quality of the product. After our inspection and
confirmation, we will repair or replace their products, or refund the payment;
If we fail to provide repair or replacement in a timely manner, we shall bear
the costs arising from the repair or replacement of the products; If the
damage is not due to the quality of the product, but due to the user's
improper operation or other reasons, the cost shall be borne by the
customer .

-2-
Our company reserves the right to make changes to this specification and
product specifications. We will make continuous efforts to improve the
quality of our products.

All rights reserved. Reproduction or reproduction is not allowed without

permission.

SYMBOL GUIDE

Symbol Symbol Description

Warning - To reduce the risk of injury, user must read

instructions manual carefully.

This symbol, placed before a safety comment, indicates a kind

of precaution, warning, or danger. Ignoring this warning may
lead to an accident. To reduce the risk of injury, fire, or
electrocution, please always follow the recommendation
shown below.
Danger!
Risk of personal injury or environmental damage! Risk of
electric shock! Risk of personal injury by electric shock!

Alternating current

Beware of clamping

Warning- Be sure to wear ear protectors when using this

product.

Warning- Be sure to wear eye protectors when using this

product.

-3-
Do not put hands into safety guard when machine is working

To signify that the mains plug must be disconnected from

electrical outlet for the purposes of maintenance of electrical
equipment, in the case of malfunction or when left unattended

To signify that safety footwear must be worn

To signify that protective gloves must be worn

To signify that head protection must be worn

This device complies with Part 15 of the FCC Rules. Operation

is subject to the following two conditions:(1)This device may
not cause harmful interference, and (2)this device must accept
any interference received, including interference that may
cause undesired operation.

This product is subject to the provision of European Directive

2012/19/EC. The symbol showing a wheelie bin crossed
through indicates that the product requires separate refuse
collection in the European Union. This applies to the product
and all accessories marked with this symbol. Products marked
as such may not be discarded with normal domestic waste, but
must be taken to a collection point for recycling electrical and
electronic devices

-4-
 SAFETY INFORMATION

Warning!Read all safety warnings, instructions, illustrations and

specifications provided with this machine. Failure to follow all instructions
listed below may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
Workspace Safety
 Keep the work area clean and well-lit. Cluttered or dark areas invite
accidents.
 DO NOT allow individuals unfamiliar with this product to use it. Keep
children and bystanders away while using this product.
 Ensure that this machine is anchored on a stable, level, and hefty
surface before beginning operation.
 DO NOT operate this device in the presence of any explosive,
flammable, or caustic liquids, gases, or dust.

Electrical Safety
 ONLY use this machine with stable compatible power sources.
 ALWAYS make sure the power switch is off before plugging in this
device.
 Do not use this device if the power switch does not steadily turn it on or
off. Repair or replace the damaged component before further use.
 Avoid body contact with grounded surfaces such as pipes, radiators,
ranges, and refrigerators while using this device.
 Do not expose the electrical components to water, including rain or
excessive humidity.
 This device MUST be electrically grounded for safe use. DO NOT
remove the grounding prong, modify the plug in any way, or use any
adapter plugs.
 Keep the power cord away from heat, oil, sharp edges, or moving
parts.

-5-
Personal Safety
 DO NOT use this device while you are tired or under the influence of
drugs, alcohol, or medication.
 Always wear appropriate personal protective equipment, such as a
dust mask, a hard hat, goggles, nonskid safety shoes, and earplugs
when using this machine.
 DO NOT overreach. Keep proper footing and balance at all times.
 DO NOT wear jewellery or loose clothing and tie back long hair during
operation. Keep your clothing, hair, and gloves away from moving
parts.
 Remove any adjusting keys or spanners before turning the device on.
 People with pacemakers should consult their physician before using
this device. Electromagnetic fields in close proximity to a pacemaker
can cause interference and even failure.

Lathe Use and Care

 DO NOT change gears while the machine is in operation.
 DO NOT force this device. Clean and lubricate as needed if parts
begin to move slowly.
 Disconnect the power cord plug from the power source before making
any adjustments, changing accessories, or storing the device.
 Use only accessories that are recommended by the manufacturer for
your model.
 Never leave the device unattended when it is plugged into an electrical
outlet.
 Maintain all labels and nameplates on the device. If any come loose or
become illegible, replace them before further use.

Maintenance Safety
 Always unplug the mini lathe from its electrical outlet before performing
any inspection, maintenance, or cleaning procedures.
 Maintain this product. Check for misalignment or binding of parts,
breakage of parts, or any other condition that may affect the device’s
operation. If damage is detected, have the part repaired or replaced

-6-
 before further use.
 Maintain tools with care. Keep cutting tools sharp and clean.
 Service for this device must be performed only by qualified repair
personnel.
 Store this device and its components out of reach of children and other
untrained persons.

SPECIFICATIONS

Technical parameter：

Model MX-S716G
Drive Type Direct drive motor, no belt drive, Metal gear
EU 220V-240V/50 Hz
Input Power AUS 220V-240V/50 Hz
US 110V/60 Hz
Rated Power 800W
Wood, Plastics, Soft Metals (Brass, Copper,
Material Compatibility
Aluminium, etc.)
Swing over Bed 200 mm
Swing over Cross Slide 110 mm
Bed Width 80 mm
Tool Post Type 4 Way
Max. Compound Slide Travel 80mm
Max. Cross Slide Travel 75 mm
Tailstock Spindle Travel 60 mm
Tailstock Taper MT2
Spindle Taper MT4
Range of Metric Threads 0.5–3 mm
Range of Imperial Threads 10–44 TPI
Range of Longitudinal Feed 0.1–0.2 mm
Centre Distance 400 mm

-7-
 Chuck Diameter 100
Spindle Bore Diameter 32 mm
Max. Spindle Speed 150-2500 RPM ±10%
Product Dimensions 960 x 490 x 530 mm
N.W.:39 kg
Weight
G.W.:45 kg

PACKAGE LIST

Unpacking
Carefully unpack the mini lathe and check all items. Do not discard any
packing material until the machine is fully assembled and operational. If
any parts are missing or broken, please contact us.

-8-
 B C D E

F G H J
I

No. Name Qty.

A Mini lathe 1

B Screwdrivers 2

C Chuck Key 1

D Spanners 3

E Chuck Jaws 3

F Metal Gears 6

G Oil Can 1

H Allen Keys 5

I Dead Centre 1

J Tool Box 1

* Instruction Manual 1

-9-
 UNPACKING AND CLEANING

1. Finish removing the wooden crate from around the lathe

2. Check all the accessories of the machine tool according to the packing
list.
3. Unbolt the lathe from the shipping crate bottom.
4. Choose a location for the lathe that is dray, has good lighting and has
enough room to be able to service the lathe on all four sides.
5. With adequate lifting equipment, slowly raise the lathe off the shipping
crate bottom. Do not lift by spindle. Make sure lathe is balanced before
moving to sturdy bench or stand.
6. To avoid twisting the bed, the lathe's location must be absolutely flat and
level. Bolt the lathe to the stand (if used). 1f using a bench, through bolt
for best performance.
7. Clean all rust protected surfaces using a mild commercial solvent,
kerosene or diesel fuel. Do not use paint thinner, gasoline or lacquer
thinner. These will damage painted surfaces. Cover all cleaned surfaces
with a light film of 20W machine oil.
8. Remove the end gear cover. Clean all components of the end gear
assembly and coat all gears with heavy, non-slinging grease.

LATHE ADJUSTMENTS

MAKE SURE THE POWER SWITCH IS IN THE OFF POSITION

AND THE SPEED IS TURNED DOWN TO ZERO BEFORE MAKING ANY
ADJUSTMENTS TO THIS DEVICE.
 Chuck Replacement: Turn the lathe off and unplug it from its power
source. Place the tailstock as far away from the chuck as possible and
place a piece of wood or a cloth underneath the chuck to protect the
machine. Remove the three bolts holding the chuck in place by
- 10 -
 removing their nuts and subsequently removing the chuck. Tapping the
chuck with a soft mallet might be required. To place a new chuck onto
the spindle, follow the above steps in reverse order.
 Jaw Replacement: Place the chuck key into the chuck hole and rotate
anti-clockwise until the jaws are at their maximum open distance. The
jaws can now be manually pulled out. To place new jaws into the chuck,
choose the #1 jaw and place it into the desired chuck slot. Ensure that
the top groove of that slot is not visible when inserting the jaw. Once
the jaw is seated into the slot, rotate the chuck clockwise to drag down
and secure the jaw. Repeat this with jaws #2 and #3.
 Tailstock Adjustment: To adjust the placement of the tailstock rest,
loosen the nut on its base, change its position, and retighten the nut.
Offset the tailstock in order to cut bevels or tapers.
 Tailstock Locking: Turn the clamping lever clockwise to lock the
tailstock in place, or anti-clockwise to unlock.
 Tool Post Adjustment: To adjust the tool post, simply loosen both bolts
holding it in place, move it to the desired position, and retighten the
bolts. Loosen the bolts on top of the tool post to replace work cutters.
 Carriage Adjustment: Rotate the carriage handwheel clockwise to
move the carriage towards the tailstock. Rotate the handwheel
anti-clockwise to move the carriage towards the chuck.
 Carriage Locking: Turn the toolpost control handle clockwise to tighten
and anti-clockwise to loosen. This handle must be loosened before
automatic feeds are used.
 Cross Slide Adjustment: Turning the cross slide handwheel will slide
the tool post perpendicular to the ways. Turn the handwheel clockwise
to move it back, and anti-clockwise to move forward.
 Carriage Feed Control: Move the half nut lever down to engage the
half nut and move the carriage under power. Make sure to disengage
the half nut before making any adjustments to avoid unexpected
carriage movement.
 Compound Control: Turn the compound control wheel anti-clockwise
to move the compound outwards and clockwise to move it inwards,
changing the cutting angle.

- 11 -
 Quill Locking: Rotate the lever clockwise to lock the spindle and
anti-clockwise to unlock.
 Tail Feed Adjustment: Rotate the tail feed handwheel clockwise to
advance the tailstock towards the chuck. Rotate the handwheel
anti-clockwise to move the tailstock away from the chuck

OPERATION

1. Emergency Button: 0N/0FF Switch

2. The machine is switched on and off with ON/OFF button. Depress to stop all
machine functions. To restart, lift the cover and press ON button.

3. Change-over Switch
After the machine is switched on, turn the switch to "F" position for
counter-clockwise spindle rotation(forward). Turn the switch to"R" position for
clockwise spindle rotation(reverse) ."O"position is OFF and the spindle remains
idle.

4. Variable Speed Control Switch

Turn the switch clockwise to increase the spindle speed. Turn the switch
counter-clockwise to decrease the spindle speed. The possible speed range is
dependent on the position of the drive belt.

5. Carriage Lock
Turn hex socket cap screw clockwise and tighten to lock. Turn counter-clockwise
and loosen to unlock.

- 12 -
Caution: carriage lock screw must be UN locked before engaging automatic feeds
or damage to lathe may occur.

6. Longitudinal Traverse Handwheel

Rotate handwheel clockwise to move the apron assembly toward the tailstock
(right). Rotate the hand wheel counter-clockwise to move the apron assembly to
ward the Headstock(left).
7. Cross Traverse Lever
Clockwise rotation moves the cross slide toward the rear of the machine.
8. Half Nut Engage Lever
Move the lever down to engage. Move the lever up to disengage.
9. Compound Rest Traverse Lever
Rotate clockwise or counter-clockwise to move or position.
10. Tool Post Clamping Lever
Rotate counter-clockwise to loosen and clockwise to tighten. Rotate the tool post
when the lever is unlocked.

- 13 -
11. tailstock Clamping screw
Turn hex nut clockwise to lock and
counter-clockwise to unlock.
12. tailstock Quill Clamping Lever
Rotate the lever clockwise to lock the
spindle and counter-clockwise
to unlock.
13. tailstock Quill Traverse Handwheel
Rotate clockwise to advance the quill.
Rotate counter-clockwise to retract the
quill.
14. tailstock off-set Adjustment
Three sets screws located on the tails stock base are used to off-set the tailstock
for cutting tapers. Loosen lock screw on tailstock end. Loosen one side set screw
while tightening the other until the amount of off-set is indicated on scale. Tighten
lock screw.

- 14 -
 OPERATION

Replacement of Chuck
The head spindle holding fixture is cylindrical. Loose three set screws and
nuts (A, Fig. 13 only two are shown)on the la the chuck flange to remove
the chuck. Position the new chuck and fix it using the same set screws and
nuts.

Fig. 13

TOOL SET UP
Clamp the turning tool into the tool holder.
The tool must be clamped firmly. When turning, the tool has a tendency to
bend under the cutting force generated during the chip formation.
For best results, tool overhang should be kept to a minimum of 3/8" or less.
The cutting angle is correct when the cutting edge is in line with the center
axis of the workpiece. The correct height of the tool can be achieved by
comparing the tool point with the point of the center-mounted in the
tailstock. If necessary, use steel spacer shims under the tool to get the
required height. (Fig. 14)

- 15 -
 Longitudinal Turning with
Auto Feed:
Use the table(A,Fig.18) on the
lathe for selecting the feed speed
or the thread pitch. Adjust the
change gear if there quired feed
or thread pitch that can not be
obtained with the installed gear
set.

 Workpiece Holding and

Drilling: Use the chuck to
hold a workpiece firmly in
place. Use the tailstock to
press a drill into the rotating
workpiece.
 Face Cutting: Use the chuck
to hold a workpiece firmly in
place. Use the tool post to
press a cutter into the face of
the workpiece. The edge of
the cutter must be the same
height as the centre.
 Internal Cutting: Use the
chuck to hold a workpiece
firmly in place. Rotate the tool
post such that the cutter is
placed in the middle of the
front face of the workpiece.
 Bevel Cutting: Use the chuck to hold a workpiece firmly in place.
Adjust the angle of the tool post to cut bevels into the workpiece.
 Thread Cutting: To cut threads, use the chuck to hold a workpiece
firmly in place and engage the half nut. Use the tool post to press a
cutter into the face of the workpiece.

- 16 -
 WIRING DIAGRAM

Key
A Ammeter PE Ground Line
M Motor U Integrated Circuit
L Load Wire P Connector
N Neutral Wire FU Fuse

WARNING!
Connection of the lathe and all other electrical
work may only be carried out by an authorized
electrician!
Failure to comply may cause serious injury and
damage to the machinery and property!

- 17 -
The MX-S716G Lathe is rated at 800W. Confirm power available at the
lathe' s location is the same rating as the lathe. Using the wiring diagram
for connecting the lathe to the mains supply. Make sure the lathe is
properly grounded.

MAINTENANCE

Keep maintenance of the machine tool during the operation to guarantee

the accuracy and service life of the machine tool.
1. In order to retain the machine's precision and functionality. It is essential
to treat it with care. Keep it clean and grease and lubricate it regularly. Only
through good care. You can be sure that the working quality of the machine
will remain constant.

NOTES: Disconnect the machine plug from the mains supply whenever
you carry out cleaning, maintenance or repair work!

Oil, grease and cleaning agents are pollutants and must not be disposed of
through the drains or in normal refuse. Dispose of those agents in
accordance with current legal requirements on the environment. Cleaning
rags impregnated with oil, grease and cleaning agents are easily
inflammable. Collect cleaning rags or cleaning wool in a suitable closed
vessel and dispose of them in an environmentally sound way - do not put
them with normal refuse!
2. Lubrication all slide ways lightly before every use. The change gears and
the lead screw must also be lightly lubricated with grease.
3. During the operation, the chips which fall onto the sliding surface should
be cleaned timely, and the inspection should be often made to prevent
chips from falling into the position between the machine tool saddle and
lathe bed guideway. Asphalt felt should be cleaned at a certain time.

NOTES: Do not remove the chips with your bare hands. There is a risk of

- 18 -
cuts due to sharp-edged chips. Never use flammable solvents or cleaning
agents or agents that generate noxious fumes!
Protect electrical components, such as motors, switches, switch boxes,
etc., against humidity when cleaning.

4. After the operation every day, eliminate all the chips and clean different
parts of the machine tool and apply machine tool oil to prevent rusting.
5. In order to maintain machining accuracy, take care of the center. The
surface of the machine tool for the chuck and the guideway and avoid
mechanical damage and wear due to improper guide.
6. If the damage is found, maintenance should be done immediately.

NOTES: Repair work may only be carried out by qualified personnel with
the corresponding mechanical and electrical knowledge.

TROUBLESHOOTING

Potential Problems Common Solutions

Re-sharpen the cutting tool.

The workpiece’s surface is Reduce the feed rate.
too rough. Clamp the cutting tool with less overhang.
Increase the tool tip’s radius.
Reduce the cutting speed.
The cutting tool has a short
Lower the crossfeed distance.
lifespan.
Add more lubricant to the workpiece.
Increase the wedge angle.
The cutting edge breaks off. Lubricate the workpiece uniformly.
Tighten the spindle bearing.
Adjust the cutting tool’s grinding angle.
The cutting thread is wrong.
Adjust the cutting tool’s pitch.

- 19 -
 Adjust the workpiece’s diameter.
Adjust the tailstock to the centre of the
The workpiece becomes
workpiece.
conned.
Align the top slide properly.
Reduce the feed rate.
The lathe is chattering.
Tighten the main bearing.
Increase the clearance angle.
Flank wear is too high. Properly centre the cutting tool onto the
workpiece.
Loosen the tailstock.
The centre runs hot.
Unlock the emergency stop switch.

Made In China

- 20 -
- 21 -
Technical Support and E-Warranty Certificate
www.vevor.com/support