Automatic Water Level Controller For Overhead and Underground Water Tank

International Journal of Advanced Engineering, Management and
Science (IJAEMS)
Peer-Reviewed Journal
ISSN: 2454-1311 | Vol-10, Issue-3; Mar-Apr, 2024
Journal Home Page: https://ijaems.com/
DOI: https://dx.doi.org/10.22161/ijaems.103.6
Automatic Water Level Controller for Overhead and

Underground Water Tank
Jitendra Singh, Mustafa, Mohammad Sahil, Lokesh Kumar Kumawat
Department of Electrical Engineering, Swami Keshvanand Institute of Technology, Management & Gramothan, Jaipur
Email: [email protected], [email protected], [email protected], [email protected]
Received: 27 Feb 2024; Received in revised form: 01 Apr 2024; Accepted: 12 Apr 2024; Available online: 22 Apr 2024
Abstract— This is an Arduino-based automatic water level controller. Here, we are going to measure the water
level with the help of Float switch fluid level controller sensors. The Float switch fluid level controller sensors
use the principle of a “2-way switch”. The motor pump automatically turns ON when the water level is low.
There is a lot of drinking water crisis in India and also in other countries. Today we need to preserve water at
any cost. In India, we can see many houses as overhead tanks and they keep on overflowing water. It wastes a lot
of water as well as electricity. If we do not do anything on this matter, then we can face a huge scarcity of water.
In this project, implement an automatic water level controller so that we no longer have to manually switch ON
and switch OFF the motor. The device automatically detects the water level, when it is low, hence triggering the
relay which turns on the motor. This helps in reducing wastage of water as well as electricity. This also reduces
manpower as we no longer need to operate it manually.
Keywords— Water Level Detector, water crisis, overhead tanks, water level controller, Float switch.
I. INTRODUCTION An automatic water level controller for both overhead and

An automatic water level controller for overhead and underground water tanks is a comprehensive solution
underground water tanks is a smart device designed to designed to streamline the process of managing water
efficiently manage water levels in both types of tanks. This supply. It comprises a network of sensors, valves, and a
innovative system utilizes sensors to detect water levels control unit that work seamlessly to maintain optimal
and activates pumps to fill or empty the tanks as needed, water levels in the tanks [2].
ensuring a consistent supply of water. By automatically The automatic water level controller for overhead and
regulating the water flow, it prevents overflow or dry underground water tanks offers numerous benefits,
running, optimizing water usage and reducing wastage. including improved efficiency, reduced water wastage, and
With its user-friendly interface and reliable operation, this enhanced convenience for users. By leveraging cutting-
controller offers convenience and peace of mind to users, edge technology, it addresses the challenges associated
making it an indispensable solution for maintaining with water management, contributing to sustainable usage
optimal water levels in residential, commercial, and and conservation efforts [3].
industrial settings [1].
In modern water management systems, ensuring efficient II. RESEARCH MOTIVATION
utilization and conservation of water resources. The
The research aims to develop an automatic water level
effective control of water levels in both overhead and
controller for both overhead and underground tanks to
underground tanks. To address this need, automatic water
address inefficiencies in manual monitoring, reduce water
level controllers have emerged as invaluable tools. These
wastage, and ensure consistent supply. By integrating
controllers employ technology to monitor and regulate
advanced sensors and control systems, the solution offers
water levels, offering convenience, reliability, and
convenience and efficiency in water management, crucial
conservation benefits.
for regions facing water scarcity. This technology
This article can be downloaded from here: www.ijaems.com 42

©2024 The Author(s). Published by Infogain Publication, This work is licensed under a Creative Commons Attribution 4.0 License.
http://creativecommons.org/licenses/by/4.0/
Singh et al. International Journal of Advanced Engineering, Management and Science, 10(3) -2024
promotes sustainability by optimizing water usage and IV. COMPONENT USED

minimizing human error. Additionally, it caters to diverse 1. Water pump: A water pump is used to move,
user needs by accommodating different types of storage compress, or transfer water from a lower level to a
systems. Overall, the research is motivated by the pressing higher one. The main purpose of a water pump is to
need for improved water management solutions to meet transfer water between two points and to get rid of
the challenges of the modern world. excess water. It is often used in construction sites,
tunnels, riverbeds, residential buildings, etc [8]. water
III. OBJECTIVES pump is physically shown in Fig.1.
The objectives of developing an Automatic Water Level

Controller for both overhead and underground water tanks
are multifaceted, addressing key concerns in water
management and conservation.
The primary aim is to enhance efficiency in water usage.
By automating the process of maintaining desired water
levels in tanks, the system ensures that water resources are
utilized optimally without unnecessary wastage. This is Fig.1: Water Pump
particularly crucial in regions facing water scarcity or
where water is a precious commodity [4].
2. Float switch sensor: A float switch is a type of 2-
Secondly, the objective is to reduce manual intervention in way switch which operates the float of the sensor as
water level management. Traditional methods of shown in Fig.2. If the water level is low then 1 switch
monitoring and adjusting water levels in tanks require is ON but the water is filled then the sensor floats and
constant human oversight, which can be time-consuming then the 2 switches are operated then the water motor
and prone to errors. The automatic controller eliminates is OFF [8].
the need for such manual intervention, providing
convenience to users and freeing up time for other tasks.
Thirdly, safety is a key objective of the Automatic Water
Level Controller. Overflow from tanks can lead to
property damage and pose safety hazards. By preventing
overflow through automated monitoring and adjustment of
water levels, the system helps to mitigate these risks,
ensuring the safety of both property and individuals [5].
Moreover, the versatility of the controller is an important
objective. It should be adaptable to different settings and
Fig.2: Float Switch Sensor
applications, including residential, commercial, and
agricultural contexts. This ensures that the benefits of
efficient water management can be realized across various 3. LED 3V: LED, or light-emitting diodes, are
sectors, contributing to overall water conservation efforts. semiconductor devices that emit light when an electric
Reliability and durability are also crucial objectives. The current passes through them. LEDs are physically
controller should be designed to withstand environmental shown in Fig.3. Commonly operated at 3 volts, LEDs
factors and operate consistently over the long term. This offer energy-efficient illumination in various
ensures that users can depend on the system for applications such as lighting [9].
uninterrupted water level management, thereby promoting
sustained water conservation practices [6].
Overall, the objectives of developing an Automatic Water
Level Controller for overhead and underground water
tanks encompass efficiency, convenience, safety,
versatility, reliability, and durability. By addressing these
objectives, the system aims to contribute to sustainable
water usage practices and environmental conservation Fig.3: LED 3V
efforts [7].

4. Relay 12V: A relay is an electrically operated switch

that controls the flow of electricity in circuits. Rated at
12 volts, relays are commonly used to control high-
power devices with low-power signals [9]. 12 V Relay
is physically shown in Fig. 4.
Fig.7: Transistor
8. Diode: A diode is a semiconductor device that allows

current flow in one direction while blocking it in the
opposite direction. It is physically shown in Fig. 8.
Fig. 4: 12 V Relay
5. Resistance: Resistance is a fundamental property of

materials that opposes the flow of electric current.
Measured in ohms (Ω), it determines how much a
material impedes the flow of electricity [10]. It is
physically shown in Fig. 8. Fig. 8: diodes
9. Buzzer: The buzzer is an electromechanical device

that produces a buzzing sound when an electrical
current passes through it. Commonly used in alarms,
timers, and signalling systems, it consists of a coil of
wire and a vibrating armature that creates the buzzing
noise, alerting users to a particular event or condition
[9]. A buzzer is shown in Fig. 9.
Fig. 5: Resistance
6. Arduino Nano: The Arduino Nano is a compact,

versatile microcontroller board based on the
ATmega328P chip as shown in Fig.6. It offers a wide
range of features including digital and analog Fig.9: Buzzer
input/output pins, USB connectivity, and
compatibility with the Arduino IDE [2]. 10. Switch: A control is defined as an on-off switch when
its function is to open or close an electrical circuit in a
stable manner as shown in Fig.10.
Fig.6: Arduino Nano
Fig. 10: Switch

7. Transistor: Transistors are semiconductor devices
crucial in electronic circuits for amplification,
switching, and signal modulation. They control the 11. Breadboard PCB: A breadboard is a reusable
flow of current between two terminals based on the solderless prototyping tool used to build and test
voltage applied to a third terminal [9]. It is physically electronic circuits as shown in Fig. 11. It consists of a
shown in Fig. 7.

grid of holes for inserting components and metal strips the underground tank. If the level falls below the lower
for connectivity. threshold, indicating insufficient water, it triggers an alarm
or notification to alert the user. This ensures timely
refilling of the underground tank to maintain a continuous
water supply. The controller relies on microcontroller-
based circuitry to process sensor inputs and control the
pump operation accordingly. It may incorporate additional
features such as LCD displays for real-time monitoring,
manual override switches, and battery backups for
uninterrupted operation during power outages. Overall, the
working principle of the automatic water level controller
involves intelligent monitoring of water levels in both
overhead and underground tanks, coupled with automated
pump control to maintain desired levels and prevent
Fig.11: Breadboard PCB wastage or shortage of water. The picture of the completed
system is shown in Fig. 13.
12. Wire: A wire is a flexible metallic conductor as

shown in Fig. 12, especially one made of copper,
usually insulated, and used to carry electric current in
a circuit.
Fig. 12: Wire (a)
13. Storage tank: A storage water tank is a container

designed to hold water for domestic, industrial, or
agricultural use, providing a reserve for when water
demand exceeds supply or during emergencies.
V. WORKING
The automatic water level controller for overhead and
underground tanks operates through a simple yet effective
mechanism to ensure consistent water levels and prevent
overflow or dry-running situations. It typically comprises
sensors placed at different levels within the tanks. For the
overhead tank, sensors are installed at the desired high and (b)
low water levels, while for the underground tank, sensors Fig.13: Pictures of the Project
are positioned at the upper and lower thresholds.
When the water level in the overhead tank drops below the
VI. CONCLUSION
set low level, the controller activates the water pump to
refill the tank from the underground reservoir. Conversely, The automatic water level controller for both overhead and
when the water level in the overhead tank reaches a high underground tanks present a pragmatic solution for
level, the controller stops the pump to prevent overflow. effective water management. By automating the
Simultaneously, the controller monitors the water level in maintenance of desired water levels, it promotes the

optimal use of water resources while reducing waste and [10] Water level indicator: What, how, types, purpose, benefits
the need for manual intervention. This system brings (2022) Water Level Controls. Available at:
convenience and reassurance to users by eliminating the https://waterlevelcontrols.com/water-level-indicator/.
necessity for constant monitoring and manual adjustments
of water levels in tanks. Furthermore, it improves safety by
preventing overflow and potential property damage due to
water overflow. Its adaptability makes it suitable for
various settings, including residential, commercial, and
agricultural applications. With its proven reliability and
durability, it ensures prolonged functionality, thus
fostering sustainable water usage practices. Overall,
investing in the automatic water level controller for
overhead and underground tanks is a worthwhile endeavor,
delivering tangible benefits to users and contributing to
environmental sustainability efforts.
REFERENCES
[1] Saurabh, S. et al. (2023) ‘Automatic water level indicator
and Controller’, i-manager’s Journal on Instrumentation and
Control Engineering, 11(1), p. 20.
doi:10.26634/jic.11.1.20166.
[2] Baballe, M. A., Muhammad, A. S., Usman, F. A., Mustapha,
N. A. K., Naisa, A. H. K., & Shehu, A. K. (2022). A review
of an automatic water level indicator. Global Journal of
Research in Engineering & Computer Sciences, 2(03), 13-
17.
[3] Kantono, M., & Akamumpa, P. (2023). Construction of an
automated water level controller for both overhead and
underground tanks with a solar power supply.
[4] Jitendra Singh, Rehan Mohammed, MradulKankaria,
Roshan Panchal, Sachin Singh, Rahul Sharma, Arduino
Based Weather Monitoring System, International Journal of
Advanced in Management, Technology and Engineering
Sciences Volume 8, Issue III, MARCH/2018, ISSN NO :
2249-7455.
[5] Barbade, G. M., Shreyas, C., Vedant, S., Vaibhav, N., &
Umesh, P. (2021). Automatic Water Tank Filling System
with Water Level Indicator. Indian Journal of
Microprocessors and Microcontroller (IJMM). ISSN, 2582-
8835.
[6] Kikomeko, I. (2022). Design and construction of a digital
water level controller that automatically controls, monitors
and ensures a continuous reserve of water in the storage
tank (Doctoral dissertation, Makerere University).
[7] Olisa, S. C., Asiegbu, C. N., Olisa, J. E., Ekengwu, B. O.,
Shittu, A. A., & Eze, M. C. (2021). Smart two-tank water
quality and level detection system via IoT. Heliyon, 7(8).
[8] Pushpalatha, N., Cheran, T., Ramya, V., Selvanayakam, S.,
& Yamunaa, V. (2024, January). Hydrolink-Automatic
Water Level Controller. In 2024 2nd International
Conference on Intelligent Data Communication
Technologies and Internet of Things (IDCIoT) (pp. 242-
246). IEEE.
[9] https://waterlevelcontrols.com/automatic-water-level-
controller-working-principle/


Automatic Water Level Controller For Overhead and Underground Water Tank

Uploaded by

Copyright:

Available Formats

Automatic Water Level Controller For Overhead and Underground Water Tank

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Automatic Water Level Controller For Overhead and Underground Water Tank

Uploaded by

Copyright:

Available Formats

International Journal of Advanced Engineering, Management and

Automatic Water Level Controller for Overhead and

I. INTRODUCTION An automatic water level controller for both overhead and

This article can be downloaded from here: www.ijaems.com 42

promotes sustainability by optimizing water usage and IV. COMPONENT USED

The objectives of developing an Automatic Water Level

This article can be downloaded from here: www.ijaems.com 43

4. Relay 12V: A relay is an electrically operated switch

8. Diode: A diode is a semiconductor device that allows

5. Resistance: Resistance is a fundamental property of

9. Buzzer: The buzzer is an electromechanical device

6. Arduino Nano: The Arduino Nano is a compact,

Fig.6: Arduino Nano

Fig. 10: Switch

This article can be downloaded from here: www.ijaems.com 44

12. Wire: A wire is a flexible metallic conductor as

Fig. 12: Wire (a)

13. Storage tank: A storage water tank is a container

This article can be downloaded from here: www.ijaems.com 45

This article can be downloaded from here: www.ijaems.com 46

You might also like