ADRIANO E.

LACAR JR
Zone 3, Aplaya, Jasaan,Misamis Oriental
Philippines 9003
09284634374 / 09271329706
[email protected]

To further enhance my skills and abilities that would give me the opportunity to prove myself as
productive and competent employee and be a part of the company’s goal and success.

PERSONAL INFORMATION

AGE: 35 YEARS OLD

BIRTHDATE: SEPTEMBER 23, 1987

HEIGHT: 5’4”

WEIGHT: 156 LBS

STATUS: SINGLE

EDUCATIONAL BACKGROUND
Vocational course
2005
Regional Training Center (TESDA)
ELECTRICAL TECHNOLOGY

Secondary
2000-2004
Aplaya National High School
Aplaya, Jasaan Misamis Oriental

Primary
1994-2000
Aplaya Elemantary School
Aplaya, Jasaan Misamis Oriental

SKILLS AND ABILITIES

• House and Building Wiring installation
• Can work with less supervision
• Can easily adjust to working environment and co-workmates

WORK EXPERIENCE

1
EEI Corporation
July 2022 – Present
FGLNG Multi-Purpose Jetty – Mc Connell Dowell Project
Batangas City
Philippines
Industrial Electrician
 Conduct test and assessments of systems and repair to work quality
 Assemble and install electrical parts and equipment.
 Respond quickly to service request and troubleshoots and repair electrical system
 Prepare report of test results
 Assist in commission test of power circuits, equipment and control system
 Check wiring diagram for correct installation, operation and installation of control circuits.
 Work efficiency and efficiently with the client and other onsite personnel
 Assemble, install, test and maintain electrical and electronic wiring
 Constructing and fabricating cable tray and cable tray support using electrical power tools such as
grinder and electrical drill
 Pulling electrical wiring through electrical conduit
 Install wiring, conduit and electrical apparatus in buildings
 Running conduit, electrical wiring and peripheral device
 Test electrical systems and continuity of circuits in electrical
 Wiring equipment and fixtures using testing device to ensure compatibility and safety of system
 Measure, cut, bend, thread, assemble and install electrical conduit
 Plan layout of electrical wiring, equipment and fixtures consistent with specifications and local
codes
 Install control and distribution apparatus such as switches, outlets, relays and circuit breaker
panels.
 Execute test plan, record data, discuss test results with other test personnel and provide general
feedback as required

EEI Corporat
March 2022 – May 2022
Petron Bataan Project
Bataan, Philippines
Industrial Electrician
 Conduct continuity and Insulation Resistance testing of Power and control cables.
 Rewiring of Electrical Panel
 Termination of power and control cables.
 Prepare report of test results
 Assist in commission test of power circuits, equipment and control system
 Check wiring diagram for correct installation, operation and installation of control circuits.
 Work efficiency and efficiently with the client and other onsite personnel
 Pulling electrical wiring through electrical conduit
 Install or repair electrical wiring and equipment
 Rewired and installed panel boards and switches
 Test electrical systems and continuity of circuits in electrical
 Wiring equipment and fixtures using testing device to ensure compatibility and safety of system

2
 Plan layout of electrical wiring, equipment and fixtures consistent with specifications and local
codes
EEI Corporation
Januaruy 2020 – February 2022
Siemens Electrification Installation works for UPPC Expansion project
Iba Este, Calumpit
Bulacan, Philippines
Industrial Electrician
 Conduct test and assessments of systems and repair to work quality
 Assemble and install electrical parts and equipment.
 Respond quickly to service to service request and troubleshoots and repair electrical system
 Prepare report of test results
 Assist in commission test of power circuits, equipment and control system
 Check wiring diagram for correct installation, operation and installation of control circuits.
 Work efficiency and efficiently with the client and other onsite personnel
 Adhere to LOTO ( Lock Out Tag Out ) procedure
 Assemble, install, test and maintain electrical and electronic wiring
 Constructing and fabricating cable tray and cable tray support using electrical power tools such as
grinder and electrical drill
 Pulling electrical wiring through electrical conduit
 Install or repair electrical wiring and equipment
 Install wiring, conduit and electrical apparatus in buildings
 Reviewing blueprints and wiring diagrams
 Rewired and installed panel boards and switches
 Test electrical systems and continuity of circuits in electrical
 Wiring equipment and fixtures using testing device to ensure compatibility and safety of system
 Measure, cut, bend, thread, assemble and install electrical conduit
 Plan layout of electrical wiring, equipment and fixtures consistent with specifications and local
codes
 Install control and distribution apparatus such as switches, outlets, relays and circuit breaker
panels.
 Execute test plan, record data, discuss test results with other test personnel and provide general
feedback as required

FDC Power Corporation

August 2019 – September 2019
Alae- PHIVIDEC Bypass Rd, Villanueva
Misamis Oriental, Philippines
Industrial Electrician
 Conduct continuity and Insulation Resistance testing of CE and DE rapping motors and Hopper
heaters.
 Respond quickly to service to service request and troubleshoots and repair electrical system
 Prepare report of test results
 Check wiring diagram for correct installation, operation and installation of control circuits.
 Work efficiency and efficiently with the client and other onsite personnel
 Adhere to LOTO ( Lock Out Tag Out ) procedure
 Install or repair electrical wiring and equipment
 Test electrical systems and continuity of circuits in electrical

3
STEAG Power Plant
July 2019 – August 2019
Villanueva Misamis Oriental
Philippines
Industrial Electrician
 Conduct continuity and Insulation Resistance testing works for Generator, circuit breakers and
neutral grounding resistors.

EEI Corporation
June 2018 – January 2019 ``
Bohol Panglao International Airport
Bohol, Philippines
Industrial Electrician
 Installation and testing of Fire Alarm and Detection System (FDAS)
 Installation of BMS, CCTV and public address speaker.
 Assemble and install electrical parts and equipment.
 Install new equipment and wiring to infrastructure as needed
 Assist in commission test of power circuits, equipment and control system
 Constructing and fabricating cable tray and cable tray support using electrical power tools such as
grinder and electrical drill
 Pulling electrical wiring through electrical conduit
 Install or repair electrical wiring and equipment
 Install wiring, conduit and electrical apparatus in buildings
 Running conduit, electrical wiring and peripheral device
 Reviewing blueprints and wiring diagrams
 Installed video surveillance cameras
 Measure, cut, bend, thread, assemble and install electrical conduit
 Install control and distribution apparatus such as switches, outlets, relays and circuit breaker
panels.
 Execute test plan, record data, discuss test results with other test personnel and provide general
feedback as required

EEI Corporation
February 2017 – May 2018
Malayan Colleges Mindanao, A Mapua School
Davao City, Philippines
Industrial Electrician
 Conduct test and assessments of systems and repair to work quality
 Assemble and install electrical parts and equipment.
 Respond quickly to service to service request and troubleshoots and repair electrical system
 Install new equipment and wiring to infrastructure as needed
 Check wiring diagram for correct installation, operation and installation of control circuits.
 Work efficiency and efficiently with the client and other onsite personnel
 Constructing and fabricating cable tray and cable tray support using electrical power tools such as
grinder and electrical drill
 Pulling electrical wiring through electrical conduit

4
 Install or repair electrical wiring and equipment
 Install wiring, conduit and electrical apparatus in buildings
 Running conduit, electrical wiring and peripheral device
 Installed video surveillance cameras
 Wiring equipment and fixtures using testing device to ensure compatibility and safety of system
 Measure, cut, bend, thread, assemble and install electrical conduit
 Install control and distribution apparatus such as switches, outlets, relays and circuit breaker
panels.

EEI Corporation
November 2015 – April 2016
First Gas power plant
Batangas, Philippines
Industrial Electrician
 Installation of conduits and raceways.
 Installation and testing of Fire Alarm and Detection System (FDAS)
 Installation of instrument devices.
 Assemble and install electrical parts and equipment.
 Assemble, install, test and maintain electrical and electronic wiring
 Constructing and fabricating cable tray and cable tray support using electrical power tools such as
grinder and electrical drill
 Pulling electrical wiring through electrical conduit
 Install wiring, conduit and electrical apparatus in buildings
 Running conduit, electrical wiring and peripheral device
 Wiring equipment and fixtures using testing device to ensure compatibility and safety of system
 Measure, cut, bend, thread, assemble and install electrical conduit


EEI Corporation
August 2015 – September 2015
Oceana Gold Project
Didipio Nueva Vizcaya, Philippines
Industrial Electrician
 Grounding system installation including Cad welding.

EEI Corporation
April 2015 – July 2015
PASAR Project
LIDE Isabel Leyte, Philippines
Industrial Electrician
 Roughing ins and cable ladder/tray and installation.
 Assist in cable pulling works.

APC By Schneider Electric

May 2014 – March 2015
EPZA II , Rosario Cavite
Production Operator

5
 Assemble of UPS: Scope of works such as battery inserting, bezel attachment, covering and
boxing of an assembled unit.
 Discharge test
 Hipot

SCAD Services Pte.,Ltd.

November 2013 – April 2014
EPZA II , Rosario Cavite
Electrician
 Electrical Maintenance

House Technology Industries Pte.,Ltd.

May 2013 – October 2013
EPZA II , Rosario Cavite
Production Operator
 Machine Operator

Selegna Holdings Corporation

June 2010 – February 2013
EPZA II , Rosario Cavite
Rebarman/Steelman
 Steel fixer
 Fabricator

Safety Plus Erectors & Developers

June 2007 – July 2008
Consolacion Cagayan de Oro City
Rebarman/Steelman
 Steel fixer
 Fabricator

Vercide Engineering Works Inc.

March 2006– July 2007
Tagoloan Misamis Oriental
Electrician
 Electrical Maintenance

6
CHARACTER REFERENCES

ENGR. ERWIN G. PALLO

E&I Construction Manager
EEI Corporation
Quezon City, Philippines
Tel no: +639059348501

JEROME NAOE
QC Supervisor
EEI Corporation
Quezon City, Philippines
Tel no: +639662252801

WIGBERT ROMERO
Electrical Supervisor
EEI Corporation
Quezon City, Philippines
Tel no: +639298586705