Scribd
Upload
30 views2 pages

LinearDigi LINEARANDDIGITALINTEGRATEDIISemester

The document outlines the curriculum for a semester course on linear and digital integrated circuits. It covers operational amplifiers, number systems, logic gates, combinational logic, sequential circuits, arithmetic circuits, timers, flip-flops, and analog to digital conversion. It also lists experiments to be performed in the accompanying laboratory course.

Uploaded by

Proshenjit Barua
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
30 views2 pages

LinearDigi LINEARANDDIGITALINTEGRATEDIISemester

The document outlines the curriculum for a semester course on linear and digital integrated circuits. It covers operational amplifiers, number systems, logic gates, combinational logic, sequential circuits, arithmetic circuits, timers, flip-flops, and analog to digital conversion. It also lists experiments to be performed in the accompanying laboratory course.

Uploaded by

Proshenjit Barua
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Semester II

ELECTRONICS-GRE-2: LINEAR AND DIGITAL INTEGRATED


CIRCUITS

(Credits: Theory-04, Practicals-02)


Theory: 60 Lectures

Operational Amplifiers (Black box approach):Characteristics of an Ideal and Practical


Operational Amplifier (IC 741), Open and closed loop configuration, Frequency Response.
CMRR. Slew Rate and concept of Virtual Ground.
Applications of Op-Amps: (1) Inverting and non-inverting amplifiers, (2) Summing and
Difference Amplifier, (3) Differentiator, (4) Integrator, (5) Wein bridge oscillator, (6)
Comparator and Zero-crossing detector, and (7) Active low pass and high pass Butterworth
filter (1 st order only). (15 Lectures)

Number System and Codes: Decimal, Binary, Octal and Hexadecimal number systems,
base conversions. Representation of signed and unsigned numbers, BCD code. Binary,

multiplication.
Logic Gates and Boolean algebra:Truth Tables of OR, AND, NOT, NOR, NAND, XOR,
XNOR, Universal Gates, Basic postulates and fundamental theorems of Boolean algebra.

Combinational Logic Analysis and Design:Standard representation of logic functions (SOP


and POS), Minimization Techniques (Karnaugh map minimization up to 4 variables for
SOP).
Arithmetic Circuits:Binary Addition. Half and Full Adder. Half and Full Subtractor, 4- bit
binary Adder/Subtractor.
Data processing circuits:Multiplexers, De-multiplexers, Decoders, Encoders.
Clock and Timer (IC 555): Introduction, Block diagram of IC 555, Astable and Monostable
multivibrator circuits. (15 Lectures)

Sequential Circuits: SR, D, and JK Flip-Flops. Clocked (Level and Edge Triggered) Flip-Flops.
Preset and Clear operations. Race-around conditions in JK Flip-Flop. Master-slave JK Flip-Flop.
Shift registers: Serial-in-Serial-out, Serial-in-Parallel-out, Parallel-in-Serial-out and Parallel-in-
Parallel-out Shift Registers (only up to 4 bits).
Counters (4 bits):Ring Counter. Asynchronous counters, Decade Counter. Synchronous Counter.

D-A and A-D Conversion: 4 bit binary weighted and R-2R D-A converters, circuit and working.
Accuracy and Resolution.A-D conversion characteristics, successive approximation ADC.
(Mention of relevant ICs for all). (15 Lectures)
Recommended Books:

Thomas L. Flyod, Digital Fundamentals, Pearson Education Asia (1994)


- Hill (1994)
Operational Amplifiers and Linear ICs, David A. Bell, 3rd Edition, 2011, Oxford University
Press.
Digital Principles and Applications, A.P. Malvino, D.P.Leach and Saha, 7th Ed, Tata McGraw
Hill.
Digital Systems: Principles & Applications, R.J.Tocci, N.S.Widmer, 2001, PHI Learning.

Semester II

ELECTRONICS LABORATORY GRE-2

LAB: LINEAR AND DIGITAL INTEGRATED CIRCUITS


60 Lectures
At least 05 experiments each from section A and B

Section-A: Op-Amp. Circuits (Hardware)

1. To design an inverting amplifier using Op-amp (741,351)for dc voltage of given


gain
2. (a) To design inverting amplifier using Op-amp (741,351) & study its frequency
response
(b) To design non-inverting amplifier using Op-amp (741,351) & study frequency
response
3. (a) To add two dc voltages using Op-amp in inverting and non-inverting mode
(b) To study the zero-crossing detector and comparator.
4. To design a precision Differential amplifier of given I/O specification using Op-
amp.
5. To investigate the use of an op-amp as an Integrator.
6. To investigate the use of an op-amp as a Differentiator.
7. To design a Wien bridge oscillator for given frequency using an op-amp.
8. To design a circuit to simulate the solution of simultaneous equation and 1st /2nd
order differential equation.
9. Design a Butterworth Low Pass active Filter (1st order) & study Frequency
Response

Section-B: Digital circuits (Hardware)

1. (a) To design a combinational logic system for a specified Truth Table. (b) To
convert Boolean expression into logic circuit & design it using logic gate ICs. (c)
To minimize a given logic circuit.
2. Half Adder and Full Adder.
3. Half Subtractor and Full Subtractor.
4. 4 bit binary adder and adder-subtractor using Full adder IC.
5. To design a seven segment decoder.
6. To design an Astable Multivibrator of given specification using IC 555 Timer.
7. To design a Monostable Multivibrator of given specification using IC 555 Timer.
8. To build Flip-Flop (RS, Clocked RS, D-type and JK) circuits using NAND gates.
9. To build JK Master-slave flip-flop using Flip-Flop ICs

You might also like