0% found this document useful (0 votes)
81 views9 pages

sf300 24pp

The document describes the Cisco SF300-24PP 24-port 10/100 PoE managed switch. It provides details on the switch's performance, features, layer 2 and 3 switching capabilities, security features, and more.

Uploaded by

dark mus
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
81 views9 pages

sf300 24pp

The document describes the Cisco SF300-24PP 24-port 10/100 PoE managed switch. It provides details on the switch's performance, features, layer 2 and 3 switching capabilities, security features, and more.

Uploaded by

dark mus
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

Cisco SF300-24PP

24-port 10/100 PoE Managed Switch

Description
The Cisco 300 Series, part of the Cisco Small Business line of network solutions, is a portfolio of affordable managed
switches that provides a reliable foundation for your business network. These switches deliver the features you need
to improve the availability of your critical business applications, protect your sensitive information, and optimize your
network bandwidth to deliver information and applications more effectively. Easy to set up and use, the Cisco 300
Series provides the ideal combination of affordability and capabilities for small businesses, and helps you create a
more efficient, better-connected workforce.

The Cisco 300 Series is broad portfolio of fixed-configuration managed Ethernet switches. Models are available with 8
to 48 ports of Fast Ethernet and 10 to 52 ports of Gigabit Ethernet connectivity, providing optimal flexibility to create
exactly the right network foundation for your business. However, unlike other small business switching solutions that
provide managed network capabilities only in the costliest models, all Cisco 300 Series Switches support the advanced
security management capabilities and network features you need to support business-class data, voice, security, and
wireless technologies. At the same time, these switches are simple to deploy and configure, allowing you to take
advantage of the managed network services your business needs.

Features
High performance and reliability
Fast, easy setup and configuration
Strong security
Power over Ethernet
IP telephony support
Networkwide Automatic Voice Deployment
Advanced network management capabilities
Optimal energy efficiency
Expansion ports
Multiple languages
Performance

Capacity 9.52 Mpps

Switching Capacity 12.8 Gbps

Layer 2 Switching

Spanning Tree Protocol (STP) Standard 802.1d Spanning Tree support

Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default 8 instances
are supported

Multiple Spanning Tree instances using 802.1s (MSTP)

Port grouping Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP)

Up to 8 groups

Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation

VLAN Support for up to 4096 VLANs simultaneously Port-based and 802.1Q tag-based
VLANs MAC-based VLAN

Management VLAN

Private VLAN Edge (PVE), also known as protected ports, with multiple uplinks

Guest VLAN Unauthenticated VLAN

Dynamic VLAN assignment via Radius server along with 802.1x client authentication

CPE VLAN

Voice VLAN Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate
levels of QoS.

Auto voice capabilities deliver network-wide zero touch deployment of voice endpoints and
call control devices

Multicast TV VLAN Multicast TV VLAN allows the single multicast VLAN to be shared in the network while
subscribers remain in separate VLANs (Also known as MVR)

Q-in-Q VLAN VLANs transparently cross a service provider network while isolating traffic among customers

Generic VLAN Registration Protocol (GVRP)/Generic Attribute RegistrationProtocols for automatically propagating and configuring VLANs in a
bridged domainP tocol (GARP)

Unidirectional Link Detection (UDLD) UDLD monitors physical connection to detect unidirectional links caused by incorrect wiring
or cable/port faults to prevent forwarding loops and blackholing of traffic in switched
networks

Dynamic Host Configuration Protocol (DHCP) Relay at Layer 2Relay of DHCP traffic to DHCP server in different VLAN. Works with DHCP Option 82

Internet Group Management Protocol (IGMP) versions 1, 2,IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports
1Kand 3 snooping multicast groups (source-specific multicasting is also supported)

IGMP Querier IGMP querier is used to support a Layer 2 multicast domain of snooping switches in
the absence of a multicast router
Head-of-line (HOL) blocking HOL blocking prevention

Jumbo Frames Up to 9K (9216) bytes

Layer 3
IPv4 routing Wirespeed routing of IPv4 packets

Up to 512 static routes and up to 128 IP interfaces

Classless Inter-Domain Routing (CIDR) Support for CIDR


Layer 3

Layer 3 Interface Configuration of layer 3 interface on physical port, LAG, VLAN interface or Loopback interface

DHCP relay at Layer 3 Relay of DHCP traffic across IP domains

User Datagram Protocol (UDP) relay Switch functions as an IPv4 DHCP Server serving IP addresses for multiple DHCP pools/scopes

Support for DHCP options

Security

Secure Shell (SSH) Protocol SSH is a secure replacement for Telnet traffic. SCP also uses SSH. SSH v1 and v2 are supported

Secure Sockets Layer (SSL) SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browserbased
management GUI in the switch

IEEE 802.1X (Authenticator role) 802.1X: RADIUS authentication and accounting, MD5 hash; guest VLAN; unauthenticated
VLAN, single/multiple host mode and single/multiple sessions

Supports time-based 802.1X Dynamic VLAN assignment

Web Based Authentication Web based authentication provides network admission control through web browser to any
host devices and operating systems.

STP Bridge Protocol Data Unit (BPDU) Guard A security mechanism to protect the network from invalid configurations. A port enabled for
BPDU Guard is shut down if a BPDU message is received on that port.

STP Root Guard This prevents edge devices not in the network administrators control from becoming
Spanning Tree Protocol root nodes.

DHCP snooping Filters out DHCP messages with unregistered IP addresses and/or from unexpected or
untrusted interfaces. This prevents rogue devices from behaving as a DHCP Server.

IP Source Guard (IPSG) When IP Source Guard is enabled at a port, the switch filters out IP packets received from the
port if the source IP addresses of the packets have not been statically configured or
dynamically learned from DHCP snooping. This prevents IP Address Spoofing.

Dynamic ARP Inspection (DAI) The switch discards ARP packets from a port if there is no static or dynamic IP/MAC bindings
or if there is a discrepancy between the source or destination address in the ARP packet. This
prevents man-in-the-middle attacks.

IP/Mac/Port Binding (IPMB) The features (DHCP Snooping, IP Source Guard, and Dynamic ARP Inspection) above work
together to prevent DOS attacks in the network, thereby increasing network availability.

Secure Core Technology (SCT) Ensures that the switch will receive and process management and protocol traffic no matter
how much traffic is received.

Secure Sensitive Data (SSD) A mechanism to manage sensitive data (such as passwords, keys, etc) securely on the switch,
populating this data to other devices, and secure autoconfig. Access to view the sensitive data
as plaintext or encrypted is provided according to the user configured access level and the
access method of the user.

Layer 2 isolation Private VLAN Edge (PVE) with community VLANPVE (also known as protected ports) provides Layer 2 isolation between devices in
the same VLAN, supports multiple uplinks.

Port security The ability to lock Source MAC addresses to ports, and limits the number of learned MAC
addresses.
Security

RADIUS/TACACS+ Supports RADIUS and TACACS authentication. Switch functions as a client.

Storm control Broadcast, multicast, and unknown unicast

RADIUS accounting The RADIUS accounting functions allow data to be sent at the start and end of services,
indicating the amount of resources (such as time, packets, bytes, and so on) used during the
session.

DoS prevention Denial-of-Service (DOS) attack prevention

ACLs Support for up to 512 rules

Drop or rate limit based on source and destination MAC, VLAN ID or IP address, protocol,
port, differentiated services code point (DSCP)/IP precedence, TCP/UDP source and
destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP)
packets, IGMP packets, TCP flag, Time-based ACLs supported.

Quality of Service

Priority levels 4 hardware queues

Scheduling Strict priority and weighted round-robin (WRR) Queue assignment based on DSCP and class of
service (802.1p/CoS)

Class of service Port based; 802.1p VLAN priority based; IPv4/v6 IP precedence/type of service (ToS)/DSCP
based; Differentiated Services (DiffServ); classification and re-marking ACLs, trusted QoS.

Rate limiting Ingress policer; egress shaping and rate control; per VLAN, per port, and flow based

Congestion avoidance A TCP congestion avoidance algorithm is required to minimize and prevent global TCP loss
synchronization.

Standards
Standards IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE
802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3ad LACP, IEEE 802.3z Gigabit
Ethernet, IEEE 802.3x Flow Control, IEEE 802.1D (STP, GARP, and GVRP),IEEE
802.1Q/p VLAN, IEEE 802.1w RSTP, IEEE 802.1s Multiple STP, IEEE 802.1X Port
Access Authentication, IEEE 802.3af, IEEE 802.3at, RFC 768, RFC 783, RFC 791, RFC
792, RFC 793, RFC 813, RFC 879, RFC 896, RFC 826, RFC 854, RFC 855, RFC 856,
RFC 858, RFC 894, RFC 919, RFC 922, RFC 920, RFC 950, RFC 1042, RFC 1071, RFC
1123, RFC 1141, RFC 1155, RFC 1157, RFC 1350, RFC 1533, RFC 1541, RFC 1624,
RFC 1700, RFC 1867, RFC 2030, RFC 2616, RFC 2131, RFC 2132, RFC 3164, RFC
3411, RFC 3412, RFC 3413, RFC 3414, RFC 3415, RFC 2576, RFC 4330, RFC 1213,
RFC 1215, RFC 1286, RFC 1442, RFC 1451, RFC 1493, RFC 1573, RFC 1643, RFC
1757, RFC 1907, RFC 2011, RFC 2012, RFC 2013, RFC 2233, RFC 2618, RFC 2665,
RFC 2666, RFC 2674, RFC 2737, RFC 2819, RFC 2863, RFC 1157, RFC 1493, RFC
1215, RFC 3416

IPv6

IPv6 IPv6 host mode


IPv6 over Ethernet Dual IPv6/IPv4 stack
IPv6

IPv6 neighbor and router discovery (ND) IPv6 stateless address auto-configuration

Path maximum transmission unit (MTU) discovery

Duplicate address detection (DAD) ICMP version 6

IPv6 over IPv4 network with Intra-Site Automatic Tunnel Addressing Protocol (ISATAP)
support

USGv6 and IPv6 Gold Logo certified

IPv6 QoS Prioritize IPv6 packets in hardware

IPv6 ACL Drop or rate limit IPv6 packets in hardware

IPv6 First Hop Security RA guard

ND inspection

DHCPv6 guard

Neighbor binding table (Snooping and static entries)

Neighbor binding integrity check


Multicast Listener Discovery (MLD v1/2) snoopingDeliver IPv6 multicast packets only to the required receivers
IPv6 applications Web/SSL, Telnet server/SSH, ping, traceroute, Simple Network Time Protocol (SNTP),
Trivial File Transfer Protocol (TFTP), SNMP, RADIUS, syslog, DNS client, Telnet Client,
DHCP Client, DHCP Autoconfig, IPv6 DHCP Relay, TACACS

IPv6 RFCs supported RFC 4443 (which obsoletes RFC2463) ICMP version 6

RFC 4291 (which obsoletes RFC 3513) IPv6 address architecture

RFC 4291 IPv6 addressing architecture

RFC 2460 IPv6 specification

RFC 4861 (which obsoletes RFC 2461) Neighbor discovery for IPv6

RFC 4862 (which obsoletes RFC 2462) IPv6 stateless address auto-configuration

RFC 1981 Path MTU discovery

RFC 4007 IPv6 scoped address architecture

RFC 3484 Default address selection mechanism

RFC 5214 (which obsoletes RFC 4214) ISATAP tunneling RFC 4293 MIB IPv6: Textual
conventions and general group RFC 3595 Textual conventions for IPv6 flow label

Management

Web user interface Built-in switch configuration utility for easy browser-based device configuration
(HTTP/HTTPS). Supports configuration, system dashboard, system maintenance, and
monitoring.

SNMP SNMP versions 1, 2c, and 3 with support for traps, and SNMP version 3 user-based security
model (USM)

Remote Monitoring (RMON) Embedded RMON software agent supports 4 RMON groups (history, statistics, alarms, and
events) for enhanced traffic management, monitoring, and analysis

IPv4 and IPv6 dual stack Coexistence of both protocol stacks to ease migration

Firmware upgrade Web browser upgrade (HTTP/HTTPS) and TFTP and upgrade over SCP running over
SSH

Upgrade can be initiated through console port as well


Dual images for resilient firmware upgrades
Management
Port mirroring Traffic on a port can be mirrored to another port for analysis with a network analyzer or
RMON probe. Up to 8 source ports can be mirrored to one destination port. A single session
is supported.

VLAN mirroring Traffic from a VLAN can be mirrored to a port for analysis with a network analyzer or
RMON probe. Up to 8 source VLANs can be mirrored to one destination port. A single session
is supported.

DHCP (Options 12, 66, 67, 82, 129, and 150) DHCP Options facilitate tighter control from a central point (DHCP server) to obtain IP
address, auto-configuration (with configuration file download), DHCP relay, and hostname.

Secure Copy (SCP) Securely transfer files to and from the switch

Autoconfiguration with Secure Copy (SCP) file downloadEnables secure mass deployment with protection of sensitive data
Text-editable config files Config files can be edited with a text editor and downloaded to another switch, facilitating
easier mass deployment

Smartports Simplified configuration of QoS and security capabilities

Auto Smartports Applies the intelligence delivered through the Smartport roles and applies it automatically to
the port based on the devices discovered over CDP or LLDP-MED.
This facilitates zero touch deployments

Textview CLI Scriptable command-line interface. A full CLI as well as a menu-based CLI is supported. User
privilege levels 1, 7, and 15 is supported for the CLI.

Cloud services Support for Cisco Small Business FindIT Network and Cisco OnPlus

Localization Localization of GUI and documentation into multiple languages

Other management Traceroute; single IP management; HTTP/HTTPS; SSH; RADIUS; port mirroring; TFTP upgrade;
DHCP client; BOOTP; SNTP; Xmodem upgrade; cable diagnostics; ping; syslog; Telnet client
(SSH secure support)

Time-based port operation Link up or down based on user-defined schedule (when the port is administratively up)

Login banner Configurable multiple banners for web as well as CLI

Power Efficiency
EEE Compliant (802.3az) Supports 802.3az on all copper ports (SG300 models)

Energy Detect Automatically turns off power off on Gigabit Ethernet and 10/100 RJ-45 port when detecting
link down

Active mode is resumed without loss of any packets when the switch detects the link up

Cable length detection Adjusts the signal strength based on the cable length for Gigabit Ethernet models. Reduces
the power consumption for cables shorter than 10m.

Disable port LEDs LEDs can be manually turned off to save on Energy

General

Jumbo frames Frame sizes up to 9K (9216) bytes supported on 10/100 and Gigabit interfaces
MAC table Up to 16K (16384) MAC addresses

Discovery
Discovery
Bonjour The switch advertises itself using the Bonjour protocol.
Link Layer Discovery Protocol (LLDP) (802.1ab) with LLDP-MED
LLDP allowsextensions
the switch to advertise its identification, configuration, and capabilities to
neighboring devices that store the data in a MIB. LLDP-MED is an enhancement to LLDP that
adds the extensions needed for IP phones.

Cisco Discovery Protocol (CDP) The switch advertises itself using the Cisco Discovery Protocol. It also learns the connected
device and its characteristics via CDP.

Power over Ethernet (PoE)

Power Dedicated to PoE 180W

Number of Ports That Support PoE 24

Power consumption (worst case)

Power Savings Mode Energy Detect

System Power Consumption 110V=25.8W

220V=27.3W

Power Consumption: Case (with PoE) 110V=223W

220V=220V=217.9W

Heat Dissipation Worst Case (BTU/hr) 760.88

Ports

Total System Ports 24 Fast Ethernet + 4 Gigabit Ethernet

RJ-45 Ports 24 Fast Ethernet 2 Gigabit Ethernet

Combo Ports (RJ-45 + SFP) 2 Gigabit Ethernet combo

Buttons Reset button

Cabling type Unshielded twisted pair (UTP) Category 5 or better for 10BASE-T/100BASE-TX; UTP
Category 5 Ethernet or better for 1000BASE-T

LEDs:System, Link/Act, PoE, Speed, LED power saving option

Flash 16 MB

CPU memory 128 MB

Packet buffer All numbers are aggregate across all ports as the buffers are dynamically shared

8Mb

Environmental

Dimensions (W x H x D) 17.3 x 1.45 x 10.1 in. (440 x 44.45 x 257 mm)

Unit weight 8.22 lb (3.73 kg)

Power 100-240V 47-63 Hz, internal, universal

Certification UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A

Operating temperature 32°to 104°F (0°to 40°C)

Storage temperature -4°to 158°F (-20°to 70°C)


Operating humidity 10% to 90%, relative, noncondensing

Storage humidity 10% to 90%, relative, noncondensing

Acoustic Noise and MTBF

Acoustic Noise and MTBF

FAN (Number) 2 pcs

Acoustic Noise 41.0 dB

MTBF @40°C (hr) 241,995.9

Ordering Info

SF300-24P 24-port 10/100 PoE Managed Switch


Powered by TC PDF ( www.tc pdf.org)

You might also like