The document provides product specifications and installation instructions for SIKASHIELD P24 PE 4mm reinforced bituminous waterproofing membrane. Key details include composition of APP modified bitumen and polyester fabric, packaging and storage requirements, mechanical properties, temperature and humidity operating ranges, and description of installation process and requirements.
The document provides product specifications and installation instructions for SIKASHIELD P24 PE 4mm reinforced bituminous waterproofing membrane. Key details include composition of APP modified bitumen and polyester fabric, packaging and storage requirements, mechanical properties, temperature and humidity operating ranges, and description of installation process and requirements.
The document provides product specifications and installation instructions for SIKASHIELD P24 PE 4mm reinforced bituminous waterproofing membrane. Key details include composition of APP modified bitumen and polyester fabric, packaging and storage requirements, mechanical properties, temperature and humidity operating ranges, and description of installation process and requirements.
The document provides product specifications and installation instructions for SIKASHIELD P24 PE 4mm reinforced bituminous waterproofing membrane. Key details include composition of APP modified bitumen and polyester fabric, packaging and storage requirements, mechanical properties, temperature and humidity operating ranges, and description of installation process and requirements.
SPECIFICATION CONTRACTING, SPECIFICATIONS AND QUANTITIES – ECL X21
RAHMA MOHAMED ALI
19015657 SIKASHIELD® P24 PE 4 MM DATA SHEET Composition Composition APP modified bitumen
Reinforcing material non-woven polyester fabric
Packaging Roll width 1.0 m (EN 1848-1)
Roll length 10.0 m
Shelf life 12 months from date of production
Storage conditions The Product must be stored in original unopened and undamaged
packaging in dry conditions and temperatures between +5 °C and +35 °C.
Store in a vertical position. Do not stack pallets of the rolls on top of each
other, or under pallets of any other materials during transport or storage.
Always refer to packaging
Appearance and color Top surface Polyethylene film
Bottom surface Polyethylene film
Effective thickness Effective thickness 4.0 mm ± 0.2 mm (EN 1849-1)
Maximum tensile force Longitudinal (MD) 600 N/50 mm ± 120 N/50mm
Transversal (CMD) 400 N/50 mm ± 80 N/50mm
Elongation at maximum Longitudinal (MD) 35% ± 20%
tensile force
Resistance to tear Longitudinal (MD) 150 N ± 45 N
Transversal (CMD) 150 N ± 45 N
Joint shear resistance Longitudinal 500 N/50 mm ± 100 N/50mm
Transversal 350 N/50 mm ± 70 N/50mm
Flexibility at low temperature ≤ 0 °C
Watertightness Method B: 24 hours at 60kPa Pass
Ambient air temperature Minimum +5 °C
Maximum +40 °C
Relative air humidity Maximum 80 %
Substrate temperature Minimum +5 °C
Maximum +40 °C
ITEM DESCRIPTION Per meter squared / square meter, supply, install and, test waterproofing of reinforced concrete flat roof, using reinforced Plastomeric bituminous membrane with thickness 4.0 mm ± 0.2 mm on single layer/2 perpendicular layers, manufactured by SIKA or similar.
The item includes the following; clearing and ensuring the concrete surface is ready to be insulated by curing any possible cracks, patches, bare reinforcement. Then leveling the brickwork of chords to prepare the slopeto-fall concrete heading to the stormwater drainage points, horizontal/vertical concrete cove not less than 20 cm in radius.
Besides grooving the parapet to interpolate the vertical membrane. Also, it includes laydown the hot liquid bitumen under the membrane as the polyester reinforcement melts at +260 °C and laying the membrane with overlapping not less than 15 cm, as well as, treating the connection with drainage points as shown in construction drawings.
Item should include slope to-fall concrete with 7cm thick avg. besides all needed accessories and equipment. This work must conform the site engineer’s instructions as prescribed in Egyptian Code for Water and Damp proofing, approved product specifications and datasheet.
