Scribd
Upload
70 views3 pages

Data Sheet Basket Filter-ATF R1

The document provides specifications for a basket filter with tag number F-1001 A/B to be used in an ATF pipeline project. It includes details like materials of construction, design codes, nozzle details, dimensions, accessories, and inspection and testing requirements. The vendor must provide additional required data marked with a #. The filter is to withstand a differential pressure of 1 kg/cm2 without failing.

Uploaded by

Suaib VCS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
70 views3 pages

Data Sheet Basket Filter-ATF R1

The document provides specifications for a basket filter with tag number F-1001 A/B to be used in an ATF pipeline project. It includes details like materials of construction, design codes, nozzle details, dimensions, accessories, and inspection and testing requirements. The vendor must provide additional required data marked with a #. The filter is to withstand a differential pressure of 1 kg/cm2 without failing.

Uploaded by

Suaib VCS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

PROJECT NUMBER: C241112

MECHANICAL DATA SHEET FOR BASKET FILTER Client Job Number C241112
F-1001 A/B Total Sheets 4

DOCUMENT NO. C241112 0 ME MDS 3002

BHARAT PETROLEUM CORPORATION


LIMITED

Providing Design, Detailed Engineering Including Residual Engineering


Consultancy, Procurement & Inspection Services For Piyala Jewar ATF
Pipeline (PJPL) Project of BPCL

B2 27.10.2023 ISSUED FOR BID MS AB SKN


B1 30.09.2023 ISSUED FOR IDC MS AB SKN
REV DATE DESCRIPTION PREP CHKD APPR
Providing Design, Detailed Engineering Including Residual
Engineering Consultancy, Procurement & Inspection Services For
Piyala Jewar ATF Pipeline (PJPL) Project of BPCL
GENERAL SPECIFICATION
Sr.No. Description UOM Data
1 BASKET FILTER TYPE Simplex, Vertical, Cylindrical, Skirt Mounted Vessel

2 TAG NO./ QTY F-1001 A/B / 2 Nos (1W+1S)

3 SERVICE ATF
5 LIQUID DENSITY kg/m 3 775 - 840

6 OPERATING CAPACITY (MIN./NOR./MAX) m3/hr 330 / ~ / 660


2
7 OPERATING PRESSURE (MIN./NOR./MAX.) kg/cm g 15 / ~ / 35
o
8 OPERATING TEMPERATURE (MIN./NOR./MAX.) C 5 / ~ / 40.0
9 PARTICLE / MESH SIZE micron 100
99.5 % for > 75 micron
10 FILTRATION EFFICIENCY %
100 % for >= 100 micron
11 ALLOWABLE PRESSURE DROP (CLEAN/DIRTY) kg/cm 2g 0.1/0.5

12 LIQUID VISCOSITY Cst 8


MATERIAL OF CONSTRUCTION
13 SHELL, TUBE SHEET & DISHED ENDS SA 516 GR.70 N
14 NOZZLES NECK SA 106 GR.B/ SA 105
15 NOZZLE FLANGES SA 105

16 EXTERNAL BOLTING ASTM A 193 GRADE B7 & ASTM A194 GR 2H

17 INTERNAL BOLTING SA 193 Gr. B8 / SA 194 Gr. 4


18 QOC SIZE VTC
19 QOC HUB ASSEMBLY SA 350 GR LF2, CL1/ SA 516 GR.70
20 QOC HEAD COVER SA 350 GR LF2, CL1 / SA 516 GR.70
21 NO OF CARTRIGE FOR DESIRED FILTRATION VTC

22 PIPE-FITTINGS SA 234 GR.WPB

23 SKIRT SUPPORT & OTHER EXTERNAL PARTS SA A516 GR.70

24 INTERNAL GASKET, IF ANY # (Suitable for ATF)


4.5MM SPIRAL WOUND GRAPHITE FILLED SS 304 METAL WINDING WITH
25 EXTERNAL GASKET / O-RING, IF ANY SS304 INNER RING & CS OUTER RING / SOFT IRON OCTAGONAL RING
TYPE JOINT GASKET
26 FILTER ELEMENT / MESH SS316

OTHER INTERNAL ATTACHMENT PERFORATED


27 STAINLESS STEEL
PLATE , IF ANY

28 OTHER PRESSURE PARTS, IF ANY # (Suitable for ATF)

DESIGN CONSIDERATION
28 DESIGN CODE ASME -SEC VIII DIV-1 (LATEST EDITION)

29 CODE STAMPING (U STAMPED) Required

30 CORROSION ALLOWANCE mm 3.0


31 DESIGN CAPACITY m3/hr 330.0
2
32 DESIGN PRESSURE kg/cm g 49.0
2
33 HYDROSTATIC TEST PRESSURE kg/cm g 73.5
o
34 DESIGN TEMPERATURE (MIN. / MAX.) C 0 to 65

35 LIQUID HOLDING CAPACITY Ltr NA


36 SIZE OF BASKET ELEMENT ( DIA x LENGTH) mm #
37 FIXING DETAIL OF FILTER ELEMENT #

38 PRESSURE RATING OF FLANGES psi / class 300

39 FINISHED SURFACE OF FLANGES AARH 125

40 DESIGN WIND VELOCITY (AS PER IS-875 PART-IV) m/s 47

41 SEISMIC ZONE (AS PER IS-1893) ZONE-IV

Document No. Rev


MECHANICAL DATA SHEET FOR BASKET FILTER
F-1001 A/B C241112-00-ME-MDS-3002 C1

Page 2 of 4
Providing Design, Detailed Engineering Including Residual
Engineering Consultancy, Procurement & Inspection Services For
Piyala Jewar ATF Pipeline (PJPL) Project of BPCL
GENERAL SPECIFICATION
NOZZLE DETAIL
12.04.20
C1 ISSUED FOR CLIENT COMMENTS UOM Size, Pressure Rating & Flange Type/End Details
19
B1 N1 LIQUID INLET Inch 10" NB, 300#, WNRF 30 HC
42 N2 LIQUID OUTLET Inch 10" NB, 300#, WNRF 30 HC

43 N3 PSV Inch HOLD" NB, 300#, WNRF 30 HC

44 N4 DRAIN Inch 2" NB, 300#, WNRF 30 HC

45 N5 VENT Inch 2" NB, 300#, WNRF 30 HC


DIMENSION & WEIGHT
46 INLET FLANGE TO OUTLET FLANGE mm #
47 OVERALL HEIGHT mm #
48 SHELL DIA. mm #
49 EMPTY WEIGHT kg #
50 OPERATING WEIGHT kg #
51 HYDROSTATIC TEST WEIGHT kg #
ACCESSORIES
52 TYPE OF END CLOSURE (FULL SIZE) Body flange and blind cover with Davit
53 CLEATS FOR O&M PLATFORM AND LADDER Required
54 LIFTING LUGS Required
55 ANCHOR/FOUNDATION BOLTS & NUTS Required
BLIND FLANGES, BOLTS, NUTS & GASKETS FOR
56 Required
DRAIN, VENT AND UTILITY CONNECTIONS
57 LADDER & PLATFORM Not Required
INSPECTION & TESTING
58 RADIOGRAPHY % 100
59 PWHT As per Code
60 HYDROSTATIC TEST Required
61 DP / MPI / UT / IMPACT TEST Required
62 INTERNAL COATING NA

63 PAINTING Required (As per VCS Doc. No. SS-PI-008 for Coastal and Marine environment)

64 INSULATION NA
NOTES :
1 VENDOR TO PROVIDE THE DATA AS MARKED "#".

THIS DATA SHEET TO BE READ IN CONJUNCTION WITH THE MATERIAL REQUISITION (DOC. NO. ) & TECHNICAL
2
SPECIFICATION (DOC. NO. VPC-SS-ME-009) & PROCESS DATA SHEET (DOC. NO. C241112-00-PC-PDS- 10022).

3 FILTER ELEMENT MUST WITHSTAND A DIFFERENTIAL PRESSURE OF 1 KG/CM2 WITHOUT CRACKING AND FAILING.

4 FLANGES AND GASKETS SHALL CONFORM TO ASME B16.5 ≤ 24 " NB & B16.47 SERIES A FOR ≥ 26" NB & ASME B16.20 RESPECTIVELY.

BIDDER TO PROVIDE LOAD CALCULATIONS FOR INLET & OUTLET NOZZLES MENTIONING ALLOWABLE FORCES AND MOMENTS.
5
AS PER PRESSURE VESSEL SPECIFICATION NO.VPC-SS-ME--008.
6 ALL GASKETS USED FOR HYDROSTATIC TESTING SHALL BE SAME AS SERVICE GASKETS.
ALL BUTT WELDED JOINTS SHALL BE FULL PENETRATION WELD & ROOT RUN SHALL BE CARRIED OUT BY TIG, IF ACCESSIBLE FROM OTHER
7
SIDES SHALL BACK CHIPPED TO SOUND METAL & REWELD.

8 FILLET WELDS SHALL BE EXAMINED BY MPI / DP METHOD.

NET OPENING AREA OF FILTER ELEMENT SHALL BE AT LEAST 8 X CROSS SECTIONAL AREA OF INLET NOZZLE..Cartridge filter vessels shall be
9
quick opening type .VENDOR to size Cartridge filter vessel for specified performance
10 EARTHING LUG SHALL NOT BE GALVANISED OR PAINTED.

11 DESIGN LIFE OF BASKET TYPE FILTER SHALL BE 30 YEARS.

DPI SHALL NOT EXCEED 0.5 KGF/CM2 THROUGHOUT EST. CLEAN/REPLACE CYCLE TIME WITH SPECIFIED REMOVAL EFFICIENCY
12

13 VENDOR TO ENSURE THAT FILTER SHALL BE SIZED FOR MINIMUM FLOW FOR 10% OF DESIGN FLOW.(TURN DOWN RATIO 10:1)

Document No. Rev

MECHANICAL DATA SHEET FOR BASKET FILTER


C241112-00-ME-MDS-3002 C1
F-1001 A/B

Page 3 of 4

You might also like