A

ISO 15218 - 15 mm Microvalves

- Flow rate max 38 Nl/min
- ISO 15218 interface
- 2/2-3/2 versions - normally open (NO) and normally closed (NC)
- Interchangeable coil - 90° orientation
- Single and multiple sub-bases - single and multipolar electric connection

ATEX version available upon request

II 3 GD c nA II T5-10°C ≤ Ta ≤ 45°C

TECHNICAL CHARACTERISTICS ISO 15218 Substructure

Ambient temperature -5 ÷ +50 °C
Fluid temperature Max +50 °C
Fluid 10 μm filtered air, with or without lubrication
Commutation system poppet
Ways/Positions 2/2 NC, 3/2 NC, 2/2 NO, 3/2 NO A
Pressure Max 9 bar
Control electric
Return mechanical spring
Connections
Nominal Ø
ISO 15218 interface
1,2 1,5 3
Nominal flow rate 26 38

VALVES
Max frequency 2700 cycles/min

CONSTRUCTIVE CHARACTERISTICS A Pitch

3/2 NC
Valve body technopolymer (aluminium external cover)
1 = Supply port
Seals nitrile rubber 2 = Use
Components stainless steel, brass 3 = Exhaust
3/2 NO 2/2 NO
ELECTRIC CHARACTERISTICS 1 = Exhaust 1 = Exhaust
2 = Use 3 = Supply port
Coil U05 DD series 3 = Supply port
Power consumption 2 W DC / 2,3 VA AC (Ø 1,2) - 2,5 W DC / 3,5 VA AC (Ø 1,5)
Drilling jig to assemble the valve on a smooth surface
Electrical connection 15 mm connector - Molex bipolar connector or loose cables with a sealing plate in between. Part no. A-299-11.
Voltage 24 V DC -12 V DC - 24 V AC - 110 V AC - 230 V AC
Manual override recessed button - 1 position
(other manual overrides upon request)
Protection degree with connector IP65

Subject to change ELECTROPILOTS 3.1

9
 A ISO 15218 - 15 mm Microvalves UNIVER GROUP

15 mm Microvalves

A
A Manual override
B Possible rotation by 180°
3/2 NC 3/2 NO 2/2 NO
1 = Supply port 1 = Exhaust 1 = Exhaust
2 = Use 2 = Use 3 = Supply port
3 = Exhaust 3 = Supply port

Microvalves Ø 1,2 for direct current coils 2 W

Symbol Pressure Ø Flow rate Current Response Time (ms) Weight (b) Part no. Suggested coils
bar mm Nl/min. En. De-en. Kg
0,018 DD-051 Coil
2/2 NC 0÷9 1,2 26 DC 11 11 A-141N
(0,037) 24 V DC - 2 W with Faston

0,018 DD-051L030
2/2 NO 0÷9 1,2 26 DC 11 11 A-161N Coil with
(0,037) 24 V DC - 2 W flying cables

0,018 Upon request 12 V DC

3/2 NC 0÷9 1,2 26 DC 11 11 A-101N
(0,037)

0,018
3/2 NO 0÷9 1,2 26 DC 11 11 A-121N
(0,037)

3 Microvalves Ø 1,5 for direct current coils 2,5 W

Symbol Pressure Ø Flow rate Current Response Time (ms) Weight (b) Part no. Suggested coils
bar mm Nl/min. En. De-en. Kg
0,018 DD-052 Coil
2/2 NC 0÷8 1,5 38 DC 11 11 A-142N
(0,037) 24 V DC - 2,5 W with Faston

0,018 DD-052L030 Coil with

2/2 NO 0÷8 1,5 38 DC 11 11 A-162N
(0,037) 24 V DC - 2,5 W flying cables

0,018 Upon request 12 V DC

3/2 NC 0÷8 1,5 38 DC 11 11 A-102N
(0,037)

0,018
3/2 NO 0÷8 1,5 38 DC 11 11 A-122N
(0,037)

Microvalves Ø 1,2 for direct or alternate current

Symbol Pressure Ø Flow rate Current Response Time (ms) Weight (b) Part no. Suggested coils
bar mm Nl/min. En. De-en. Kg
0,018 DD-040 Coil
2/2 NC 0÷9 1,2 26 DC/AC 11 11 A-151N
(0,037) 24 V AC - 50/60 Hz -2,3 VA with Faston
DD-041
0,018 12 V DC - 2 W
2/2 NO 0÷9 1,2 26 DC/AC 11 11 A-171N DD-050
(0,037) 48 V AC - 50/60 Hz - 2,3 VA
DD-051
0,018 24 V DC - 2 W
3/2 NC 0÷9 1,2 26 DC/AC 11 11 A-111N DD-070
(0,037)
230 V AC - 50/60 Hz - 2,3 VA

0,018 DD-051L030 Coil with

3/2 NO 0÷9 1,2 26 DC/AC 11 11 A-131N
(0,037) 24 V DC - 2 W flying cables

Upon request 12 V DC

(b) = the weight in brackets refers to coil with faston

For technical data of coils see “Accessories>Coils”
Microvalves are supplied without coil and connector

3.1 ELECTROPILOTS Subject to change

10
 A ISO 15218 - 15 mm Microvalves UNIVER GROUP

Microvalves Ø 1,5 for direct or alternate current

Symbol Pressure Ø Flow rate Current Response Time (ms) Weight (b) Part no. Suggested coils
bar mm Nl/min. En. De-en. Kg

2/2 NC 0,018 DD-011 Coil

0÷8 1,5 38 DC/AC 11 11 A-152N
(0,037) 24 V AC - 50/60 Hz - 3,5 VA with Faston
DD-013
230 V AC - 50/60 Hz - 3,5 VA
3/2 NC 0,018 A-112N DD-040
0÷8 1,5 38 DC/AC 11 11
(0,037) 24 V AC - 50/60 Hz - 2,3 VA
DD-042
12 V DC - 2,5 W
DD-052
24 V DC - 2,5 W
DD-060
48 VAC - 50/60 Hz - 3,5 VA
DD-052L030 Coil with
24 V DC - 2,5 W flying cables

Upon request 12 V DC

>> Coils

U5 flying cables U05 15 mm

weight: 0,019 Kg weight: 0,019 Kg
DD-051L030 DD-011 DD-050
DD-052L030 DD-013 DD-051
DD-040 DD-052
DD-041 DD-060
DD-042 DD-070

Standard manual override

Operation Notes Symbol
3

VALVES
1 = with button with tool, 1 position (standard) metallic 
2 = with button, 1-2 positions (upon request) technopolymer red colour
3 = with front button, 1 position (upon request) technopolymer red colour 
4 = with button, 1 position (upon request) metallic 

1 2 3 4

(b) = the weight in brackets refers to coil with faston

For technical data of coils see “Accessories>Coils”
Microvalves are supplied without coil and connector

Subject to change ELECTROPILOTS 3.1

11
 A ISO 15218 - 15 mm Microvalves UNIVER GROUP

Sub-base for external electric connection

Sub-base in extruded anodized aluminium with conveyed supplies and exhausts for assembling NC or NO valves.
If NC and NO valves are assembled on just one base, it is necessary to insert the inverter part A-350 for NO valves.

A - 326A - _ _(b) G1/8 threaded connections (standard)

A - 326B - _ _(b) M5 threaded connections (upon request)
A - 326D - _ _(b) push-in connections tube 4 (upon request)

A Manual override

N = Number of valve positions

(b) = Number of positions
3/2 NC
1 = Supply port
2 = Use
3 = Exhaust
3/2 NO 2/2 NO
1 = Exhaust 1 = Exhaust
2 = Use 3 = Supply port
3 = Supply port

3 Sub-base for integrated electric connection

Sub-base in extruded anodized aluminium up to Max 13 stations with sub-D connector 15 pin (upon request up to 23 with
connector 25 pin) and G1/8 threaded standard connections, with conveyed supplies and exhausts for assembling NC or NO valves,
with integrated coil connection and optical indication of the valve working status.
If both NO and NC valves are assembled on just one sub-base, NC valves are always mounted on the connector side and afterwards
the NO valves. The invert plate (part no. A-350) must be installed for NO valves.

A Manual override

N = Number of valve positions

3/2 NC
1 = Supply port
2 = Use
3 = Exhaust
3/2 NO 2/2 NO
1 = Exhaust 1 = Exhaust
2 = Use 3 = Supply port
3 = Supply port

3.1 ELECTROPILOTS Subject to change

12
 A ISO 15218 - 15 mm Microvalves UNIVER GROUP

A-299-11 A-301

Sealing plate Blank plate

It blocks the seal in place when the valve is mounted on a smooth surface without Unused valve stations must be closed with the blank plate
a seal housing material: aluminium
material: aluminium weight: 0,002 Kg
weight: 0,003 Kg

A-305 A-350

Single base Inverter plate

material: zamak NO and NC valves can be mounted on a single block inserting
connection: M5 this device between the NO valve and the sub-base.
weight: 0,012 Kg If all installed valves are NO versions, just invert air supply
without using the inverter plate.
material: plastic
weight: 0,002 Kg

VALVES

Subject to change ELECTROPILOTS 3.1

13