1996 - 2002 Viper V-10 - JTEC - PCM

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

31/5/23, 19:01 1996 - 2002 Viper V-10 - JTEC_PCM

1996 - 2002 Viper V-10


From JTEC_PCM

Facing PCM w/Connectors at Bottom

Connector A - Black Connector B - White Connector C - Gra


==============================================================================================================================
| 01 02 03 04 05 06 07 08 09 10 11 | 01 02 03 04 05 06 07 08 09 10 11 | 01 02 03 04 05 06 07 0
| | |
| 12 13 14 15 16 17 18 19 20 21 | 12 13 14 15 16 17 18 19 20 21 | 12 13 14 15 16 17 18
| | |
| 22 23 24 25 26 27 28 29 30 31 32 | 22 23 24 25 26 27 28 29 30 31 32 | 22 23 24 25 26 27 28 2
==============================================================================================================================

A01 = Ignition Coil #4 B01 = NOT USED C01 = A/C Compressor Clutch R
A02 = Fused Ignition Switch Power B02 = Injector #7 C02 = Low Speed Fan
A03 = Ignition Coil #3 B03 = Injector #9 C03 = ASD Relay
A04 = Sensor Ground B04 = Injector #1 C04 = NOT USED
A05 = Ignition Coil #5 B05 = Injector #3 C05 = NOT USED
A06 = NOT USED B06 = Injector #5 C06 = Skip Shift Solenoid
A07 = Ignition Coil #1 B07 = NOT USED C07 = NOT USED
A08 = Crank Position Sensor B08 = NOT USED C08 = NOT USED
A09 = Ignition Coil #2 B09 = NOT USED C09 = NOT USED
A10 = Idle Air Control #2 B10 = Generator Field C10 = Leak Detect Pump Soleno
A11 = Idle Air Control #1 B11 = Shift Indicator Light C11 = NOT USED
A12 = NOT USED B12 = Injector #6 C12 = ASD Relay
A13 = NOT USED B13 = Injector #8 C13 = NOT USED
A14 = NOT USED B14 = Injector #10 C14 = Leak Detect Pump Sense
A15 = Intake Air Temp Sensor B15 = Injector #2 C15 = Ambient Temp Sensor
A16 = Coolant Temp Sensor B16 = Injector #4 C16 = Generator Light
A17 = 5v Power B17 = NOT USED C17 = MIL Light
A18 = Camshaft Position Sensor B18 = NOT USED C18 = NOT USED
A19 = Idle Air Control #3 B19 = NOT USED C19 = Fuel Pump Relay
A20 = Idle Air Control #4 B20 = NOT USED C20 = Evap Solenoid
A21 = NOT USED B21 = Reverse Lockout Solenoid C21 = High Speed Fan
A22 = Battery 12v B22 = NOT USED C22 = A/C Request

www.jtec.info/index.php?title=1996_-_2002_Viper_V-10 1/2
31/5/23, 19:01 1996 - 2002 Viper V-10 - JTEC_PCM
A23 = Throttle Position Sensor B23 = NOT USED C23 = A/C Select
A24 = Left Upstream O2 B24 = NOT USED C24 = Brake Switch
A25 = Left Downstream O2 B25 = NOT USED C25 = NOT USED
A26 = Right Upstream O2 B26 = NOT USED C26 = Fuel Level Sensor
A27 = Manifold Absolute Pressure Sensor B27 = Speedometer Signal C27 = SCI Tx
A28 = NOT USED B28 = Vehicle Speed Sensor C28 = CCD Bus -
A29 = Right Downstream O2 B29 = NOT USED C29 = SCI Rx
A30 = NOT USED B30 = NOT USED C30 = CCD Bus +
A31 = Ground B31 = 5v Power C31 = Tachometer Signal
A32 = Ground B32 = NOT USED C32 = NOT USED

Retrieved from "http://www.jtec.info/index.php?title=1996_-_2002_Viper_V-10&oldid=29"

This page was last modified on 3 March 2012, at 14:27.


This page has been accessed 20,901 times.

www.jtec.info/index.php?title=1996_-_2002_Viper_V-10 2/2

You might also like