STANDARD EQUIPMENT OPTIONAL EQUIPMENT MOVING YOU FURTHER

ISO Standard cabin Fuel filler pump (35 L/min)

All-weather steel cab with 360O visibility Beacon lamp
Safety glass windows Single-acting piping kit (breaker, etc.)
Rise-up type windshield wiper Double-acting piping kit (clamshell, etc.)
Sliding fold-in front window Quick coupler
Sliding side window(LH) Travel alarm
Lockable door Booms
Hot & cool box 4.6m, 15’ 1”
Storage compartment & Ashtray Arms
Cabin roof-steel cover 1.9m, 6’ 3”
Radio & USB player 2.1m, 6’11”
12 volt power outlet (24V DC to 12V DC converter) 2.5m, 8’ 2”
Computer aided power optimization (New CAPO) system 3.0m, 9’ 10”
3-power mode, 2-work mode, user mode Cabin FOPS (ISO 10262 Level Ⅱ)
Auto deceleration & one-touch deceleration system FOPS (Falling Object Protective Structure)
Auto warm-up system Cabin guard-Front
Auto overheat prevention system Wire net
Automatic climate control Fine net
Air conditioner & heater Cabin lights
Defroster Cabin front window rain guard
Self-diagnostics system Sun visor
Starting Aid (air grid heater) for cold weather Undercarriage
Centralized monitoring Rear outrigger
LCD display Rear dozer and front outrigger
Engine speed or Trip meter/Accel. Rear and front outrigger
Clock Rear outrigger and front dozer
Gauges Lower frame under cover (Additional)
Fuel level gauge Pre-heating system, coolant
Engine coolant temperature gauge Tool kit
Hyd. oil temperature gauge Operator suit
Warnings Rearview camera
Check engine Seat
Communication error Mechanical suspension seat with heater
Low battery MOVING YOU
TiresFURTHER
- dual (9.00 - 20 solid)
Air cleaner clogging Fenders (Mudguards)
Indicators Hi-mate (Remote Management System)
Max power Air compressor
Low speed/High speed Precleaner
Fuel warmer Rear work lamp
Auto idle
Door and cab locks, one key
Two outside rearview mirrors
Fully adjustable suspension seat with seat belt
Pilot-operated slidable joystick
Four front working lights
Electric horn
Batteries (2 x 12V x100 AH)
Battery master switch
Removable clean-out screen for oil cooler
Automatic swing brake
Removable reservoir tank
Fuel pre-filter with fuel warmer
Boom holding system
Arm holding system
Accumulator for lowering work equipment * Standard and optional equipment may vary. Contact your Hyundai dealer for
Electric transducer more information. The machine may vary according to International standards.
Lower frame under cover (Normal) * The photos may include attachments and optional equipment that are not
Tires-dual (9.00-20-14PR) available in your area.
Travel alarm * Materials and specifications are subject to change without advance notice.
Rear dozer blade * All imperial measurements rounded off to the nearest pound or inch.

PLEASE CONTACT

*Photo may include optional equipment.

www.hyundai-ce.com 2018. 11 Rev. 5

 Pride at Work
Hyundai Construction Equipment strives to build state-of-the art earthmoving equipment to give
every operator maximum performance, more precision, versatile machine preferences, and proven
quality. Take pride in your work with Hyundai!

Machine Walk-Around
Engine Technology
Proven / reliable, fuel efficient Cummins Tier Ⅱ B3.9-C engine
Low noise / Auto engine warm up feature / Anti-restart feature

Hydraulic System Improvements

New patented hydraulic control system for improved controllability / Improved control valve design
for added efficiency and smoother operation / New auto boom and swing priority system for
optimum speed / New auto power boost feature for additional power when needed / Improved
arm-in flow regeneration system for added speed and efficiency

Pump Compartment
Industry-leading, powerful, reliable Kawasaki designed, variable volume in-line axial piston pumps
New compact solenoid block equipped with 3 solenoid valves, 1 EPPR valve, 1 check valve
accumulator and pilot filter-controls safety lock, power boost, arm-in regeneration control, boom
priority(swing logic valve control)
Remotely mounted fuel, engine oil and case drain filters for maximum convenience while servicing

Carrier
Heavy duty carrier frame with two speed powershift transmission
Heavy duty drive line and axles / Front axle oscillation +/- 7 degrees with ram lock
Wet disc brake (front & rear) / Automatic parking brake - spring applied, hydraulically released

Improved Steering Column

Slim-profile steering column capable of telescoping 60 mm and tilting 30 degrees

Enhanced Operator Cab

Improved visibility
Enlarged cab with improved visibility
Larger right-side glass, now one piece, for better right visibility
Safety glass windows on all sides - less expensive than (polycarbonate) and won’t scratch or fade
Reduced front window seam for improved operator view
Improved Cab Construction
New steel tube construction for added operator safety, protection and durability
New window open/close mechanism designed with cable and spring lift assist and single latch
release
Improved Suspension Seat / Console Assembly
Ergonomic joysticks with auxiliary control buttons for attachment use, now with new sleek styling
Adjustable arm rests - turn dial to raise or lower for optimum comfort
Advanced 7” Color Cluster
New Color LCD Display with easy to read digital gauges for hydraulic oil temperature, water
temperature, and fuel / Simplified design makes adjustment and diagnostics easier. Also, new
enhanced features such as rear-view camera are integrated into monitor.
3 power modes : (P) Power, (S) Standard, (E) Economy
2 work modes : Dig & Attachment, (U) User mode for operator preference
Enhanced self-diagnostic features with GPS / satellite technology
One pump flow or two pump flow for optional attachment is now selectable through the cluster.
New anti-theft system with password capability
Boom speed and arm regeneration are selectable through the monitor.
Auto power boost is now available - selectable (on/off) through the monitor.
Powerful air conditioning and heat with auto climate control, 20% more heat and air output than
7 series!
Hi-Mate (Remote Management System) works through GPS/Satellite technology to ultimately
provide better customer service and support

*Photo may include optional equipment.

2/3
 Preference Operator Comfort
In 9S Series cabin you can easily adjust the seat, console and
armrest settings to best suit your personal operating preferences.
Seat and console position can be set together and independent
Operating a 9S Series is unique to every operator. Operators can fully customize their work from each other. Improved steering wheel telescope and tilt functions provide operators improved
environment and operating preferences to fit their individual needs. access. A fully automatic, high capacity airconditioning system maintains a constant preferred
temperature.

Reduced Stress
Work is stressful enough. Your work environment should be stress free. Hyundai's 9S series
provides improved cab amenities, additional space and a comfortable seat to minimize stress to
the operator. A powerful climate control system provides the operator with optimum air
temperature. An advanced audio system with USB player, AM/FM stereo is perfect for listening to
music favorites.

Operator - Friendly Cluster

The advanced new cluster with 7 inch wide color LCD screen and toggle switch
allows the operator to select his personal machine preferences. Power and work
mode selection, self diagnostics, optional rear-view camera, maintenance check
lists, start-up machine security, and video functions were integrated into the
cluster to make the machine more versatile and the operator more productive.

*Photo may include optional equipment.

Wide Cabin with Excellent Visibility

The newly designed cabin was conceived for more space, a wider field of view and
operator comfort. Special attention was given to a clear, open and convenient interior
with plenty of visibility on the machine surroundings and the job at hand. This well
balanced combination of precision aspects put the operator in the perfect position to
work safely and securely.

4/5
 Precision
Innovative hydraulic system technologies make the 9S Series excavator fast,
smooth and easy to control.
Computer Aided Power
The engine horsepower and hydraulic horsepower together in unison through the advanced CAPO(Computer Aided
Power Optimization) system, flow for the job at hand. Operator can set their own preferences for boom or swing
priority, power mode selection and optional work tools at the touch of a button.
The CAPO system also provides complete self diagnostic features and digital gauges for important information like
hydraulic oil temperature, water temperatures and fuel level. This system interfaces with multiple sensors placed
throughout the hydraulic system as well as hydraulic flow.

P (Power Max) mode maximizes machine speed and power for mass production.
S (Standard) mode provides a reduced, fixed rpm for optimum performance and improved
Power Mode fuel economy. For maximum fuel savings and improved control, E (Economy) mode
provides precise flow based on load demand. Three unique power modes provide the
operator with custom power, speed and fuel economy.

The work mode allows the operator to select single flow attachments like a hydraulic
Work Mode breaker or bi-directional flow attachments like a crusher. Flow settings unique to each
attachment can be programmed from within the cluster.

Some jobs require more precise machine settings. Using the versatile U (User) mode, the
User Mode operator can customize engine speed, pump output, idle speed and other machine
settings for the job at hand.

Improved Hydraulic System

To achieve optimum precision, Hyundai redesigned the
hydraulic system to provide the operator with super fine
touch and improved controllability. Improved pump flow
control reduces flow when controls are not being used to
minimize fuel consumption.
Improved spool valves in the control valve are engineered
to provide more precise flow to each function with less
effort.
Improved hydraulic valves, precision-designed variable
volume piston pumps, fine-touch pilot controls, and
enhanced travel functions make any operator running a 9S
Series look like a smooth operator. Newly improved features
include arm-in and boom-down flow regeneration, improved control valve technology and innovative auto boom
and swing priority for optimal performance in any application.

Auto Boom-swing Priority

This smart function automatically and continuously looks the ideal
hydraulic flow balance for the boom and swing motions of the
machine. The advanced CAPO system monitors the hydraulic system
and adjusts its settings to maximize performance and productivity.

*Photo may include optional equipment.

6/7
 Performance
9S Series is designed for maximum performance to
keep the operator working productively.

Improved Durability
9S series excavators are equipped with stainless spring guards to
protect the hoses from external damages. Both dozer and outrigger
are equipped with cylinder guards for added protection.

Structural Strength New Auto Ram Lock System

The 9S series cabin structure has been fitted with stronger During not traveling in work-mode, a new auto ram lock system is
but slimmer tubing for more safety an better visibility Low- available to improve operating safety.
stress and high strength steel was integrally welded to form
a strong and stable lower frame. Structural durability was
evaluated and tested by means of FEM (Finite Elements
Method) analysis and long-term durability tests.

CUMMINS B3.9C ENGINE

The Cummins B3.9-C engine has been designed with 40%
fewer parts than the competitors. That means there's less
that can go wrong when you need it most. It also means
fewer parts to inventory. Repairs are simplified because no
special tools are needed for maintenance. The weight of the
machine is reduced without sacrificing strength.
The B3.9-C engine is capable of reaching emission standards
without electronic engine controls. You get a proven power
plant that meets ecological concerns, without paying a
premium for technology you don’t need.

*Photo
*Photo
may include
may include
optional
optional
equipment.
equipment.

8/9
 Profitability
9S Series is designed to maximize profitability through improved efficiencies,
enhanced service features and longer life components.

Fuel Efficiency
9S Series excavators are engineered to be extremely fuel efficient.
New innovations like two-stage auto decel system and the new
economy mode help to conserve fuel and reduce the impact on the
environment.

Hi-MATE (Remote Management System)

Hi-MATE, Hyundai's proprietary remote management
system, provides operators and dealer service personnel
access to vital service and diagnostic information on the
machine from any computer with internet access. Users can
pinpoint machine location using digital mapping and set
machine work boundaries, reducing the need for multiple
service calls. Hi-MATE saves time and money for the owner
and dealer by promoting preventative maintenance and
reducing machine downtime.

Easy Access
Ground-line access to filters, lube fittings, fuses, machine computer
components and wide open compartments makes service more
convenient on the 9S Series.

Long-Life Components
9S series excavators were designed with bushings designed for long-life lube intervals
(250 hrs) & polymer shims (wear resistant, noise reducing), long-life hydraulic filters
(1,000hrs), long-life hydraulic oil (5,000hrs), more efficient cooling systems and
integrated preheating systems which extend service intervals, minimize operating costs
and reduce machine down time.

*Photo may include optional equipment.

10/11
Specifications
ENGINE AXLE & WHEEL BUCKETS
Full floating front axle is supported by center pin for ocillation. It can be locked by All buckets are welded with high-strength steel.
MODEL Cummins B3.9-C
ocillation lock cylinders. Rear axle is fixed on the lower chassis.
Water cooled, 4 cycle diesel, 4-cylinders in
Type line, direct injection, turbocharged, charger Tires 9.00-20-14PR, Dual(tube type)
air cooled, low emission (optional) 9.00-20, Dual(solid type)
J1995 (gross) 113 HP (84 kW) at 2100 rpm
Rated SAE
flywheel
J1349 (net) 105 HP (78 kW) at 2100 rpm SWING SYSTEM
6271/1 (gross) 115 PS (84 kW) at 2100 rpm
horsepower DIN Swing motor Axial pistons motor
6271/1 (net) 106 PS (78 kW) at 2100 rpm
Swing reduction Planetary gear reduction 0.23 (0.30) 0.40 (0.52) 0.52 (0.68) 0.65 (0.85) 0.71 (0.93) ▣ 0.45 (0.59) ⊙ 0.55 (0.72)
Max. torque 45.6 kgf.m (330lbf.ft) / 1,500 rpm 0.46 (0.60) 0.58 (0.76)
Swing bearing lubrication Grease-bathed
Bore X stroke 102 mm X 120 mm (4.02” X 4.72”) SAE heaped m3 (yd3)
Swing brake Multi wet disc(pin lock type)
Piston displacement 3,900cc (238 in3)
Swing speed 12.9 rpm Capacity Width
Batteries 2 x 12 V x 100 AH Recommendation mm (ft·in)
m3 (yd3) mm (in)
Starting motor 24V, 4.5 kW Weight
Alternator 24V, 70 Amp
STEERING SYSTEM SAE CECE Without With kg (lb)
4.6 (15’ 1”) Boom
Hydraulically actuated, orbitrol type steering system actuates on front wheels heaped heaped sidecutters sidecutters
through the steering cylinders. 1.9 (6’ 3”) Arm 2.1 (6’ 11”) Arm 2.5 (8’ 2”) Arm 3.0 (9’ 10”) Arm
HYDRAULIC SYSTEM 0.23 (0.30) 0.20(0.26) 520(20.5) 620(24.4) 335(740) ● ● ● ●
Min. turning radius 6,300 mm(20’ 8”)
MAIN PUMP 0.40 (0.52) 0.35(0.46) 750(29.5) 850(33.5) 410(900) ● ● ● ●
Type Two variable displacement piston pumps 0.46 (0.60) 0.40(0.52) 840(33.1) 940(37.0) 435(960) ● ● ● ■
Rated flow 2 X 130 L /min (34.3 US gpm/28.6 UK gpm)
COOLANT & LUBRICANT CAPACITY
0.52 (0.68) 0.45(0.59) 915(36.0) 1,015(40.0) 460(1,010) ● ● ■ ▲
Sub-pump for pilot circuit Gear pump Refilling liter US gal UK gal
0.58 (0.76) 0.50(0.65) 1,000(39.4) 1,100(43.3) 480(1,060) ● ■ ■ ▲
Cross-sensing and fuel saving pump system Fuel tank 270.0 71.3 59.4
0.65 (0.85) 0.55(0.72) 1,105(43.5) 1,205(47.4) 500(1,100) ■ ▲ ▲ -
Engine coolant 17.5 4.6 3.8
0.71 (0.93) 0.60(0.78) 1,190(46.9) 1,290(50.8) 540(1,190) ▲ ▲ - -
HYDRAULIC MOTORS Engine oil 15.3 4.0 3.4
▣ 0.45 (0.59) 0.40(0.52) 1,520(59.8) 1,620(63.8) 410(900) ● ● ■ -
Travel Axial piston motor with brake valve Swing device - gear oil 2.5 0.7 0.5
⊙ 0.55 (0.72) 0.45(0.59) 1,800(70.9) 1,900(74.8) 585(1,290) ■ ▲ ▲ -
Swing Axial piston motor with automatic brake Front 13.8 3.6 3.0
Axle ▣ Ditching bucket ●: Applicable for materials with density of 2,000 kg /m3 (3,370 lb/ yd3) or less
Rear 16.0 4.2 3.5
RELIEF VALVE SETTING ⊙ Heavy duty bucket ■: Applicable for materials with density of 1,600 kg /m3 (2,700 lb/ yd3) or less
Hydraulic system (including tank) 210.0 55.5 46.2
Implement circuits 350 kgf/cm2 (4,970 psi) ▲: Applicable for materials with density of 1,100 kg /m3 (1,850 lb/ yd3) or less
Hydraulic tank 124.0 32.8 27.3
Travel 380 kgf/cm2 (5,400 psi)
Power boost (boom, arm, bucket) 380 kgf/cm2 (5,400 psi)
Swing circuit 285 kgf/cm2 (4,050 psi) UNDERCARRIAGE ATTACHMENT
Pilot circuit 40 kgf/cm2 (570 psi) Reinforced box-section frame is all-welded, low-stress. Booms and arms are welded with a low-stress, full-box section design. 4.6m (15’ 1”) Boom and 1.9m (6’ 3”), 2.1m (6’ 11”), 2.5m (8’ 2”), & 3.0m (9’ 10”) Arms are available.
Service valve Installed Dozer blade and outriggers are available. A pin-on design.

A very useful addition for leveling and back filling

HYDRAULIC CYLINDERS Dozer blade
or clean-up work.
Boom : 2-105 x 1,075 mm (4.1” x 42.3”)
Indicated for max. operation stabillity when digging
Arm : 1-115 x 1,138 mm (4.5” x 46.8”) Outrigger
and lifting. Can be mounted on the front/or the rear.
No. of cylinder
Bucket : 1-100 x 840 mm (3.9” x 33.1”)
DIGGING FORCE
bore X stroke
Blade : 2-100 x 236 mm (3.9” x 9.3”) Length mm (ft·in) 4,600 (15’ 1”)
OPERATING WEIGHT (APPROXIMATE) Boom
Outrigger : 2-110 x 446 mm (4.3” x 7.6”) Weight kg (lb) 1,030 (2,270)
Operating weight, including 4,600mm (15’ 1”) One-piece boom, 2,100mm (6’ 11”)
Remarks
arm, SAE heaped 0.58 m3 (0.76 yd3) backhoe bucket, lubricant, coolant, full fuel tank, Length mm (ft·in) 1,900 (6’ 3”) 2,100 (6’ 11”) 2,500 (8’ 2”) 3,000 (9’ 10”)
DRIVES & BRAKES hydraulic tank and the standard equipment. Arm
Weight kg (lb) 560 (1,230) 580 (1,280) 610 (1,340) 670 (1,480)
4-wheel hydrostatic drive. Constant mesh, helical gear transmission provides
MAJOR COMPONENT WEIGHT kN 87.3 [94.8] 87.3 [94.8] 87.3 [94.8] 87.3[94.8]
2 forward and reverse travel speeds.
Upperstructure 4,680kg (10,320 lb) SAE kgf 8,900 [9,660] 8,900 [9,660] 8,900 [9,660] 8,900[9,660]
Max. drawbar pull 8,500 kgf (18,740 lbf) Mono boom(with arm cylinder) 1,030kg (2,270 lb) Bucket
lbf 19,620 [21,300] 19,620 [21,300] 19,620 [21,300] 19,620[21,300]
1st 8 km/h (5.0 mph) digging
travel speed OPERATING WEIGHT kN 102 [110.8] 102 [110.8] 102 [110.8] 102[110.8]
2nd 30 km/h (18.6 mph) force
Gradeability 350 (70 %) Undercarriage Mono boom ISO kgf 10,400 [11,290] 10,400 [11,290] 10,400 [11,290] 10,400[11,290]
Rear dozer blade 13,700kg (30,200 lb) [ ]:
Parking brake : Independent dual brake, front and rear axle full hydraulic power brake. lbf 22,930 [24,890] 22,930 [24,890] 22,930 [24,890] 22,930[24,890]
Rear outrigger 14,100kg (31,090 lb) Power
- Spring released and hydraulic applied wet type multiple disk brake. kN 76.5 [83.1] 73.6 [79.9] 62.8 [68.2] 55.9[60.7]
Front outrigger and rear blade 14,700kg (32,410 lb) Boost
- Transmission is locked at neutral position for parking, automatically. SAE kgf 7,800 [8,470] 7,500 [8,140] 6,400[6,950] 5,700[6,190]
Front blade and rear outrigger 14,700kg (32,410 lb) Arm
lbf 17,200 [18,670] 16,530 [17,950] 14,110[15,320] 12,570[13,640]
Four outrigger 15,100kg (33,290 lb)
CONTROL crowd
kN 80.4 [87.3] 77.5 [84.1] 65.7[71.4] 57.9[62.8]
Pilot pressure operated joysticks and pedals with detachable lever provide almost force
ISO kgf 8,200 [8,900] 7,900 [8,580] 6,700[7,270] 5,900[6,410]
effortless and fatigueless operation. AIR CONDITIONING SYSTEM
The air condition system for the machine contains the fluorinated greenhouse gas with lbf 18,080 [19,630] 17,420 [18,910] 14,770[16,040] 13,010[14,120]
Two joysticks with one safety lever
Pilot control global warming potential of R134a. ( Global Warming Potential : 1430 )
(LH): Swing and arm, (RH): Boom and bucket (ISO) Note : Boom weight includes arm cylinder, piping, and pin
The system hold 0.75kg refrigerant consisting of a CO2 equivalent 1.07kg metric tonne.
Engine throttle Electric, Dial type Arm weight includes bucket cylinder, linkage, and pin
For more information, Please refer to the manual.

12/13
Dimensions & Working Range Undercarriage
R140W-9S DIMENSIONS

R140W-9S WITH REAR DOZER

Unit : mm (ft·in)

Mono Boom 4,600(15’ 1”) R140W-9S WITH REAR OUTRIGGER

Arm 1,900 (6’ 3”) 2,100 (6’ 11”) 2,500 (8’ 2”) 3,000 (9’ 10”)

A Overall length of shipping position 7,760 (25’ 6”) 7,820 (25’ 8”) 7,770 (25’ 6”) 7,830 (25’ 8”)

B Overall length of traveling position 7,750 (25’ 5”) 7,760 (25’ 6”) 7,690 (25’ 3”) 7,710 (25’ 4”)

C Height of attachment(shipping position) 2,760 (9’ 1”) 2,860 (9’ 5”) 2,810 (9’ 3”) 3,100 (10’ 2”)

D Height of attachment(traveling position) 3,500 (11’ 6”) 3,500 (11’ 6”) 3,620 (11’ 11”) 3,600 (11’ 10”)

F Overall width 2,500 (8’ 2”) 2,500 (8’ 2”) 2,500 (8’ 2”) 2,500 (8’ 2”)

G Height of cabin 3,140 (10’ 4”) 3,140 (10’ 4”) 3,140 (10’ 4”) 3,140 (10’ 4”)

R140W-9S WITH REAR DOZER AND

FRONT OUTRIGGER

R140W-9S WORKING RANGE Unit : mm (ft·in)

4,600
Boom length
(15’ 1”)
1,900 2,100 2,500 3,000 R140W-9S WITH REAR AND
Arm length
(6’ 3”) (6’ 11”) (8’ 2”) (9’ 10”) FRONT OUTRIGGER
Max. digging 7,750 7,920 8,320 8,790
A
reach (25’ 5”) (26’ 0”) (27’ 4”) (28’ 10”)
Max. digging 7,530 7,700 8120 8,590
A'
reach on ground (24’ 8”) (25’ 3”) (26’ 8”) (28’ 2”)
Max. digging 4,650 4,850 5,250 5,750
B
depth (15’ 3”) (15’ 11”) (17’ 3”) (18’ 10”)
Max. digging 4,390 4,600 5,040 5,570
B'
depth (8' level) (14’ 5”) (15’ 1”) (16’ 6”) (18’ 3”)
Max. vertical wall 4,350 4,460 5,030 5,550
C
digging depth (14’ 3”) (14’ 8”) (16’ 6”) (18’ 3”)
Max. digging 8,400 8,470 8,790 9,070
R140W-9S WITH REAR OUTRIGGER
D
height (27’ 7”) (27’ 9”) (28’ 10”) (29’ 9”) AND FRONT DOZER
Max. dumping 5,960 6,040 6,350 6,620
E
height (19’ 7”) (19’ 10”) (20’ 10”) (21’ 9”)
2,620 2,670 2,650 2,670
F Min. swing radius
(8’ 7”) (8’ 10”) (8’ 8”) (8’ 9”)

14/15
Lifting Capacity Lifting Capacity
Rating over-front Rating over-side or 360 degree Rating over-front Rating over-side or 360 degree
R140W-9S MONO BOOM R140W-9S MONO BOOM
Boom : 4.6 m (15’ 1”) / Arm : 1.9 m (6’ 3”) / Bucket : 0.58 m3 (0.76 yd3) SAE heaped / With rear dozer blade down Boom : 4.6 m (15’ 1”) / Arm : 2.1 m (6’ 11”) / Bucket : 0.58 m3 (0.76 yd3) SAE heaped / With rear dozer blade down

Load radius At max. reach Load radius At max. reach

Load point 1.5 m (5 ft) 3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) Capacity Reach Load point 1.5 m (5 ft) 3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) Capacity Reach
height height
m (ft) m (ft)
m (ft) m (ft)

6.0 m kg *3350 *3350 *3200 2080 6.22 6.0 m kg *3130 *3130 *3050 1950 6.43
(20 ft) lb *7390 *7390 *7050 4590 (20.4) (20 ft) lb *6900 *6900 *6720 4300 (21.1)
4.5 m kg *3740 3550 *2860 2120 *3310 1610 7.05 4.5 m kg *3540 *3540 *3210 2120 *3160 1520 7.23
(15 ft) lb *8250 7830 *6310 4670 *7300 3550 (23.1) (15 ft) lb *7800 *7800 *7080 4670 *6970 3350 (23.7)
3.0m kg *7070 6400 *4710 3330 *3900 2050 3370 1420 7.42 3.0m kg *6620 6450 *4510 3310 *3770 2040 3230 1340 7.59
(10 ft) lb *15590 14110 *10380 7340 *8600 4520 7430 3130 (24.3) (10 ft) lb *14590 14220 *9940 7300 *8310 4500 7120 2950 (24.9)
1.5 m kg *7620 5740 *5750 3090 *4340 1960 3320 1380 7.42 1.5 m kg *8650 5730 *5580 3060 *4230 1930 3180 1300 7.59
(5 ft) lb *16800 12650 *12680 6810 *9570 4320 7320 3040 (24.3) (5 ft) lb *19070 12630 *12300 6750 *9330 4250 7010 2870 (24.9)
Ground kg *8960 5590 *6340 2940 *4600 1890 3590 1480 7.06 Ground kg *9090 5510 *6240 2900 *4540 1860 3420 1390 7.24
Line lb *19750 12320 *13980 6480 *10140 4170 7910 3260 (23.2) Line lb *20040 12150 *13760 6390 *10010 4100 7540 3060 (23.8)
-1.5 m kg *7690 *7690 *9450 5620 *6250 2920 *3860 1830 6.24 -1.5 m kg *7380 *7380 *9530 5530 *6240 2860 *3760 1700 6.45
(-5 ft) lb *16950 *16950 *20830 12390 *13780 6440 *8510 4030 (20.5) (-5 ft) lb *16270 *16270 *21010 12190 *13760 6310 *8290 3750 (21.2)
-3.0 m kg *7750 5800 *5020 3030 -3.0 m kg *11710 *11710 *7990 5690 *5240 2950
(-10 ft) lb *17090 12790 *11070 6680 (-10 ft) lb *25820 *25820 *17610 12540 *11550 6500

16/17
Lifting Capacity Lifting Capacity
Rating over-front Rating over-side or 360 degree Rating over-front Rating over-side or 360 degree
R140W-9S MONO BOOM R140W-9S MONO BOOM
Boom : 4.6 m (15’ 1”) / Arm : 2.5 m (8’ 2”) / Bucket : 0.58 m3 (0.76 yd3) SAE heaped / With rear dozer blade down Boom : 4.6 m (15’ 1”) / Arm : 3.0 m (9’ 10”) / Bucket : 0.58 m3 (0.76 yd3) SAE heaped / With rear dozer blade down

Load radius At max. reach Load radius At max. reach

Load point 1.5 m (5 ft) 3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) Capacity Reach Load point 1.5 m (5 ft) 3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) 7.5 m (25 ft) Capacity Reach
height height
m (ft) m (ft)
m (ft) m (ft)

6.0 m kg *2820 1700 6.92 6.0 m kg *2100 *2100 *2570 1480 7.46

(20 ft) lb *6220 3750 (22.7) (20 ft) lb *4630 *4630 *5670 3260 (24.5)

4.5 m kg *3110 *3110 *2980 2150 *2880 1360 7.66 4.5 m kg *2710 2200 *2590 1210 8.14

(15 ft) lb *6860 *6860 *6570 4740 *6350 3000 (25.1) (15 ft) lb *5970 4850 *5710 2670 (26.7)

3.0m kg *5700 *5700 *4110 3360 *3500 2050 *2930 1200 8.00 3.0m kg *3580 3450 *3170 2090 *1780 1350 *2640 1080 8.46

(10 ft) lb *12570 *12570 *9060 7410 *7720 4520 *6460 2650 (26.2) (10 ft) lb *7890 7610 *6990 4610 *3920 2980 *5820 2380 (27.8)

1.5 m kg *8610 5850 *5270 3080 *4030 1930 2900 1160 8.00 1.5 m kg *7700 6080 *4840 3150 *3770 1960 *2190 1290 2640 1040 8.46

(5 ft) lb *18980 12900 *11620 6790 *8880 4250 6390 2560 (26.2) (5 ft) lb *16980 13400 *10670 6940 *8310 4320 *4830 2840 5820 2290 (27.8)

Ground kg *3820 *3820 *9000 5500 *6070 2890 *4430 1830 3090 1240 7.67 Ground kg *3780 *3780 *9530 5580 *5830 2920 *4280 1840 *1820 1250 2780 1100 8.15

Line lb *8420 *8420 *19840 12130 *13380 6370 *9770 4030 6810 2730 (25.2) Line lb *8330 *8330 *21010 12300 *12850 6440 *9440 4060 *4010 2760 6130 2430 (26.7)

-1.5 m kg *6470 *6470 *9740 5460 *6260 2820 *4470 1800 *3510 1480 6.94 -1.5 m kg *5830 *5830 *9890 5450 *6250 2810 *4490 1780 3210 1280 7.48

(-5 ft) lb *14260 *14260 *21470 12040 *13800 6220 *9850 3970 *7740 3260 (22.8) (-5 ft) lb *12850 *12850 *21800 12020 *13780 6190 *9900 3920 7080 2820 (24.5)

-3.0 m kg *9750 *9750 *8560 5580 *5620 2870 *3480 2150 22.8 -3.0 m kg *8470 *8470 *9150 5500 *5950 2820 *3320 1810 *3390 1750 6.31

(-10 ft) lb *21500 *21500 *18870 12300 *12390 6330 *7670 4740 (18.5) (-10 ft) lb *18670 *18670 *20170 12130 *13120 6220 *7320 3990 *7470 3860 (20.7)

-4.5 m kg *6890 5740

1. Lifting capacity is based on ISO 10567. 3. The load point is a hook located on the back of the bucket.
(-15 ft) lb *15190 12650
2. Lifting capacity of the Robex Series does not exceed 75% of the tipping load with 4. (*) indicates the load limited by hydraulic capacity.
the machine on firm, level ground or 87% of full hydraulic capacity.
1. Lifting capacity is based on ISO 10567. 3. The load point is a hook located on the back of the bucket.
2. Lifting capacity of the Robex Series does not exceed 75% of the tipping load with 4. (*) indicates the load limited by hydraulic capacity.
the machine on firm, level ground or 87% of full hydraulic capacity.

18/19