Bubble sort Algorithm

In this article, we will discuss the Bubble sort Algorithm. The working procedure of bubble sort
is simplest. This article will be very helpful and interesting to students as they might face bubble
sort as a question in their examinations. So, it is important to discuss the topic.

Bubble sort works on the repeatedly swapping of adjacent elements until they are not in the
intended order. It is called bubble sort because the movement of array elements is just like the
movement of air bubbles in the water. Bubbles in water rise up to the surface; similarly, the array
elements in bubble sort move to the end in each iteration.

Although it is simple to use, it is primarily used as an educational tool because the performance
of bubble sort is poor in the real world. It is not suitable for large data sets. The average and
worst-case complexity of Bubble sort is O(n2), where n is a number of items.

Bubble short is majorly used where -

o complexity does not matter

o simple and shortcode is preferred

Algorithm
In the algorithm given below, suppose arr is an array of n elements. The
assumed swap function in the algorithm will swap the values of given array elements.

1. begin BubbleSort(arr)
2. for all array elements
3. if arr[i] > arr[i+1]
4. swap(arr[i], arr[i+1])
5. end if
6. end for
7. return arr
8. end BubbleSort

Working of Bubble sort Algorithm

Now, let's see the working of Bubble sort Algorithm.

To understand the working of bubble sort algorithm, let's take an unsorted array. We are taking a
short and accurate array, as we know the complexity of bubble sort is O(n2).
Let the elements of array are -

First Pass
Sorting will start from the initial two elements. Let compare them to check which is greater.

Here, 32 is greater than 13 (32 > 13), so it is already sorted. Now, compare 32 with 26.

Here, 26 is smaller than 36. So, swapping is required. After swapping new array will look like -

Now, compare 32 and 35.

Here, 35 is greater than 32. So, there is no swapping required as they are already sorted.

Now, the comparison will be in between 35 and 10.

Here, 10 is smaller than 35 that are not sorted. So, swapping is required. Now, we reach at the
end of the array. After first pass, the array will be -
Now, move to the second iteration.

Second Pass
The same process will be followed for second iteration.

Here, 10 is smaller than 32. So, swapping is required. After swapping, the array will be -

Now, move to the third iteration.

Third Pass
The same process will be followed for third iteration.

Here, 10 is smaller than 26. So, swapping is required. After swapping, the array will be -
Now, move to the fourth iteration.

Fourth pass
Similarly, after the fourth iteration, the array will be -

Hence, there is no swapping required, so the array is completely sorted.

Bubble sort complexity

Now, let's see the time complexity of bubble sort in the best case, average case, and worst case.
We will also see the space complexity of bubble sort.

1. Time Complexity

Case Time Complexity

Best Case O(n)

Average Case O(n2)

Worst Case O(n2)

o Best Case Complexity - It occurs when there is no sorting required, i.e. the array
is already sorted. The best-case time complexity of bubble sort is O(n).
o Average Case Complexity - It occurs when the array elements are in jumbled
order that is not properly ascending and not properly descending. The average
case time complexity of bubble sort is O(n2).
 o Worst Case Complexity - It occurs when the array elements are required to be
sorted in reverse order. That means suppose you have to sort the array elements
in ascending order, but its elements are in descending order. The worst-case time
complexity of bubble sort is O(n2).

2. Space Complexity

Space Complexity O(1)

Stable YES

o The space complexity of bubble sort is O(1). It is because, in bubble sort, an extra
variable is required for swapping.
o The space complexity of optimized bubble sort is O(2). It is because two extra
variables are required in optimized bubble sort.

Now, let's discuss the optimized bubble sort algorithm.

Optimized Bubble sort Algorithm

In the bubble sort algorithm, comparisons are made even when the array is already sorted.
Because of that, the execution time increases.

To solve it, we can use an extra variable swapped. It is set to true if swapping requires;
otherwise, it is set to false.

It will be helpful, as suppose after an iteration, if there is no swapping required, the

value of variable swapped will be false. It means that the elements are already sorted,
and no further iterations are required.

Working of Heap sort Algorithm

Now, let's see the working of the Heapsort Algorithm.

In heap sort, basically, there are two phases involved in the sorting of elements. By using
the heap sort algorithm, they are as follows -
 o The first step includes the creation of a heap by adjusting the elements of the array.
o After the creation of heap, now remove the root element of the heap repeatedly
by shifting it to the end of the array, and then store the heap structure with the
remaining elements.

Now let's see the working of heap sort in detail by using an example. To understand it
more clearly, let's take an unsorted array and try to sort it using heap sort. It will make the
explanation clearer and easier.

First, we have to construct a heap from the given array and convert it into max heap.

After converting the given heap into max heap, the array elements are -

Next, we have to delete the root element (89) from the max heap. To delete this node,
we have to swap it with the last node, i.e. (11). After deleting the root element, we again
have to heapify it to convert it into max heap.
After swapping the array element 89 with 11, and converting the heap into max-heap,
the elements of array are -

In the next step, again, we have to delete the root element (81) from the max heap. To
delete this node, we have to swap it with the last node, i.e. (54). After deleting the root
element, we again have to heapify it to convert it into max heap.

After swapping the array element 81 with 54 and converting the heap into max-heap, the
elements of array are -
In the next step, we have to delete the root element (76) from the max heap again. To
delete this node, we have to swap it with the last node, i.e. (9). After deleting the root
element, we again have to heapify it to convert it into max heap.

After swapping the array element 76 with 9 and converting the heap into max-heap, the
elements of array are -

In the next step, again we have to delete the root element (54) from the max heap. To
delete this node, we have to swap it with the last node, i.e. (14). After deleting the root
element, we again have to heapify it to convert it into max heap.

After swapping the array element 54 with 14 and converting the heap into max-heap, the
elements of array are -
In the next step, again we have to delete the root element (22) from the max heap. To
delete this node, we have to swap it with the last node, i.e. (11). After deleting the root
element, we again have to heapify it to convert it into max heap.

After swapping the array element 22 with 11 and converting the heap into max-heap, the
elements of array are -

In the next step, again we have to delete the root element (14) from the max heap. To
delete this node, we have to swap it with the last node, i.e. (9). After deleting the root
element, we again have to heapify it to convert it into max heap.

After swapping the array element 14 with 9 and converting the heap into max-heap, the
elements of array are -
In the next step, again we have to delete the root element (11) from the max heap. To
delete this node, we have to swap it with the last node, i.e. (9). After deleting the root
element, we again have to heapify it to convert it into max heap.

After swapping the array element 11 with 9, the elements of array are -

Now, heap has only one element left. After deleting it, heap will be empty.

After completion of sorting, the array elements are -

Now, the array is completely sorted.

Heap sort complexity

Now, let's see the time complexity of Heap sort in the best case, average case, and worst
case. We will also see the space complexity of Heapsort.
1. Time Complexity

Case Time Complexity

Best Case O(n logn)

Average Case O(n log n)

Worst Case O(n log n)

o Best Case Complexity - It occurs when there is no sorting required, i.e. the array
is already sorted. The best-case time complexity of heap sort is O(n logn).
o Average Case Complexity - It occurs when the array elements are in jumbled
order that is not properly ascending and not properly descending. The average
case time complexity of heap sort is O(n log n).
o Worst Case Complexity - It occurs when the array elements are required to be
sorted in reverse order. That means suppose you have to sort the array elements
in ascending order, but its elements are in descending order. The worst-case time
complexity of heap sort is O(n log n).