Product Data Sheet
TS250 Series
Entry Level Dispenser
The TS250 Series Dispenser/Controller dispenses low, medium
and high-viscosity fluids accurately and consistently. These KEY FEATURES AND BENEFITS
systems are economical, highly accurate and repeatable micro-
air dispensing systems.
Universal power supply for worldwide use
These user friendly fluid dispensing systems include digital timer
16 x 2 LCD display with back lighting
with rotary control time knob for easy setup, and a vacuum
control for all viscosities of fluids. Features a small footprint and Digital timing from 0.020 – 60 seconds
is lightweight. Adjustable vacuum suck back to control
fluid tailing and waste
The rear DB9 interface connector has the ability to initiate the
dispensing cycle by an external device by way of a voltage or
contact closure signal.
Available in two versions of operating pressure: 0 to 100psi (0-
6.9 bar) for general applications, and 0 to 15psi (0-1.0 bar) for
specific low viscosity applications.
The dispenser is shipped with the following items:
Universal power supply
Foot switch
Air hose
Sample tips
10cc syringe barrel and receiver head
Syringe barrel stand
TYPICAL APPLICATIONS
Dispense dots of solder paste on PCBA pads
Dispense UV adhesive in medical device applications
Dispensing beads of grease for lubrication applications
USA & Canada +1 714 230 2398 Europe +44 2380 489 100 Asia +86 21 64952662 www.techconsystems.com
INDENTIFICATION OF FEATURES
SPECIFICATIONS & PART NUMBERS Dimensions are in inches [mm]
Part Number: TS250 TS255
Size (Imperial): 6'' W x 7.7'' L x 7.2'' H 6'' W x 7.7'' L x 7.2'' H
Size (Metric): 152mm x 195mm x 183mm 152mm x 195mm x 183mm
Weight: 2.6 lb (1200g) 2.6 lb (1200g)
Pressure Range: 0 to 100psi (0-6.9 bar) 0 to 15psi (0-1.0 bar)
Cycle Rate: 600/min. 600/min.
Timing Range: 0.020 – 60 seconds 0.020 – 60 seconds
Timing Repeat
+/- 0.001% +/- 0.001%
Tolerance:
Input Voltage: 100 – 240 VAC 100 – 240 VAC
Input Frequency: 50 – 60 Hz 50 – 60 Hz
Cycle Modes: Timed, Purge Timed, Purge
Certification: CE, TUV-GS and NRTL CE, TUV-GS and NRTL
ACCESSORIES
For Sales and Support:
Syringe barrels: The dispenser can be connected to any size
syringe barrel or color. The syringe barrels connect to a receiver Techcon Systems Corporate Headquarters,
head which is the link between the dispenser and syringe barrel. 12151 Monarch Street, Garden Grove,
Receiver heads are available with 3ft (0.9m) or 6ft (1.8m) air California, 92841, USA.
tubing Tel: 1-714-230-2398, Fax: 1-714-230-2393
E-mail: [email protected]
Dispensing Tips: Suitable for use with all tip series. For the
complete dispensing tip offering please visit Techcon Systems European Corporate Office,
www.techconsystems.com Eagle Close, Chandler’s Ford Industrial Estate,
Eastleigh, Hampshire, SO53 4NF, UK.
Tel: +44 2380 489 100, Fax: +44 2380 489 109
E-mail: [email protected]
Or visit www.techconsystems.com
Version 3.00
LOCAL DISPENSING SOLUTIONS WORLDWIDE
