Quick Start Parameters Warranty

1.Power on Calibration Product Name AMT-518 Reminder

GeoMetry and Angle： d/8 (diffused illumination,8 degree viewing) It is recommend that keep the packing box for at least 30 days as the
SCI (specular component included) packing box is required to ensure the safety of transportation.
+SCE（specular component excluded）
Standards compliant： Conform to standard CIE No.15, GB/T 3978, GB 2
GB/T 18833,ISO7724-1,ASTM E1164,DIN5033 Teil7 Non warranty regulations
Spectroscopic method： Integrated Optical Component 1.Unauthorized repair,misuse,accident,modification,use of nonofficial acc-
essories.
1 meter above Sensor： CMOS sensor
the ground
2.Instrument is out of warranty.
Color Value： Reflectance 3.Damage caused by force.
Power on Place the instrument on Measure air for CIE-Lab,CIE-LCh,HunterLab,CIE-Luv,XYZ,Yxy,RGB 4.Not the performance failure listed in the product performance
the calibration base for black calibration ColorDifference(ΔE*ab,ΔE*cmc,ΔE*94,ΔE*00)
white calibration. failure table.
WI(ASTM E313-00,ASTM E313-73,CIE/ISO 5.Performance failure caused by human factors.
AATCC,Hunter，TaubeBerger,Stensby,R457),YI(ASTM D1925
ASTM E313-00,ASTM E313-73),Blackness（My,dM）,Color Fastness
2.How to measure color difference Contact
Tint(ASTM E313-00),Color Density（CMYK(A,T,E,M)）,Milm
Manufacturer: Qingdao Tlead International Co., Ltd.
Munsell,Opacity,ColorStrength
Address: 1-2606 No.20 Lian Yun Gang Road Qingdao
L*:89.6
a*:75.9
dL*:--
da*:--
db*:--
dE*ab:--
dL*:89.6
da*:75.9
db*:15.5
Integrating sphere diameter： 40mm Shandong China, PC:266034
b*:15.5 dE*ab:3
Fail .1
Color D

Color D Color D
Lighting source： LED(Full band balanced LED light source) Tel: +86 571 85888707
Measurement Area/ Aperture Size： Φ8mm/Φ11mm Website: www.amtast.com
Spectral Colorimeter AMT-518 Wavelength Interval： 10nm
Wavelength Range： 400-700nm Warning
Operation Instruction Reflectance measurement range： 200%
Reflectance resolution： 0.01% Do not attempt to disassemble or replace any part of the equipment.
Product introduction ·

Please contact the agent or official customer service for after sales service.
Measurement accuracy： 0.01
Measure Target Enter into color difference Measure sample to · Do not place the equipment near heat source or directly expose to the fire.
Please read this manual carefully before using the product. Repeatability：
： Chromaticity value: Standard deviation ΔE*ab ≤ 0.04
measurement interface get the color difference · If any liquid enters the equipment,please power off the equipment immedia-
Average :dE*ab≤ 0.05;Max. :dE*ab≤ 0.08
tely.
(when a white tile is measured 30 times at 5-seconds interval)
· This product contains small parts.It may cause suffocation and other
Indicator Light Inter-instrument agreement： MAV/SCI,ΔE*ab≤0.4 hazards,if swallowed by children.
Screen （BCRA SeriesⅡ,average measurement of 12 tiles）
3.Power off
Measurement Time： About 1S
Test Button
Product Performance Failure Table
Interface： USB
USB Illuminants： A,B,C,D50,D55,D65,D75,F1,F2,F3,F4,F5,F6
F7,F8,F9,F10,F11,F12,CWF,U30,U35,DLF,NBF,TL83,TL84 Name Performance failure
Observer Angle： 2°,10°
Spectral Colorimeter 1.The equipment can't power on.
Screen： IPS full color screen, 2.4 inches AMT-518
Battery： Rechargeable, 8,000 times continuous tests,3.7V /3000mAh 2.The equipment’s button can't work normally.
Long press 3s Light Source Lifetime： 10 years,3 million tests 3.Equipment screen fails to work normally.
Language： Chinese,English 4.Equipment lamp fails to work normally.
Test Aperture Calibration： Automatic 5.Bluetooth can't connect.
Instrument Software support： Windows
Camera： no
Weight： About 280g
Charging Probe
Instrument Size： 180mm*60mm*51mm
Pass Metrology： Yes
White Tile
Storage： 100 values

Calibration and Charging Base

*Parameters are subject to change without notice