HCMC International University Dr.

Phuong Vo

Laboratory 1 – Wireshark Introduction

Student name: Nguyen Thanh Tai…………….Student ID: ……ITITIU146

In this first lab, you’ll get acquainted with Wireshark, and make some simple packet captures and
observations.

Packet sniffer:
Using the information from Wikipedia, please answer what a packet sniffer is? And what it aims
for? Give some examples of popular packet sniffer softwares?

Packet sniffer is a packet analyzer, protocol analyzer or network analyzer. It aims to monitor
the network traffic working by examining streams of data that flow between the computer on
the network as well as networked computer and the larger internet. Examples of popular
packet sniffer softwares: wireshark, Ettercap, Dsniff, Cain and Abel.

Figure 1 shows the structure of a packet sniffer. At the right of Figure 1 are the protocols (in this
case, Internet protocols) and applications (such as a web browser or ftp client) that normally run on
your computer. The packet sniffer, shown within the dashed rectangle in Figure 1 is an addition to
the usual software in your computer, and consists of two parts. The packet capture library receives a
copy of every link-layer frame that is sent from or received by your computer. Recall from the
discussion from section 1.5 in the text (Figure 1.24 ) that messages exchanged by higher layer
protocols such as HTTP, FTP, TCP, UDP, DNS, or IP all are eventually encapsulated in link-layer
frames that are transmitted over physical media such as an Ethernet cable. In Figure 1, the assumed
physical media is an Ethernet, and so all upper-layer protocols are eventually encapsulated within an
Ethernet frame. Capturing all link-layer frames thus gives you all messages sent/received from/by
all protocols and applications executing in your computer.

This lab content is from the lab materials of the book “Computer Networking: a Top-Down
Approach.”
HCMC International University Dr. Phuong Vo

The second component of a packet sniffer is the packet analyzer, which displays the contents of all
fields within a protocol message. In order to do so, the packet analyzer must “understand” the
structure of all messages exchanged by protocols. For example, suppose we are interested in
displaying the various fields in messages exchanged by the HTTP protocol in Figure 1. The packet
analyzer understands the format of Ethernet frames, and so can identify the IP datagram within an
Ethernet frame. It also understands the IP datagram format, so that it can extract the TCP segment
within the IP datagram. Finally, it understands the TCP segment structure, so it can extract the HTTP
message contained in the TCP segment. Finally, it understands the HTTP protocol and so, for
example, knows that the first bytes of an HTTP message will contain the string “GET,” “POST,” or
“HEAD,” as shown in Figure 2.8 in the text.

Running Wireshark:
When you run the Wireshark program, you’ll get a startup screen, as shown below:

Figure 2: Initial Wireshark Screen

Take a look at the upper left hand side of the screen – you’ll see an “Interface list”. This is the list of
network interfaces on your computer. Once you choose an interface, Wireshark will capture all
packets on that interface. In the example above, there is an Ethernet interface (Gigabit network
Connection) and a wireless interface (“Microsoft”).

If you click on one of these interfaces to start packet capture (i.e., for Wireshark to begin capturing
all packets being sent to/from that interface), a screen like the one below will be displayed, showing
information about the packets being captured. Once you start packet capture, you can stop it by
using the Capture pull down menu and selecting Stop.

This lab content is from the lab materials of the book “Computer Networking: a Top-Down
Approach.”
HCMC International University Dr. Phuong Vo

The Wireshark interface has five major components:

 The command menus are standard pulldown menus located at the top of the window. Of
interest to us now are the File and Capture menus. The File menu allows you to save
captured packet data or open a file containing previously captured packet data, and exit the
Wireshark application. The Capture menu allows you to begin packet capture.
 The packet-listing window displays a one-line summary for each packet captured, including
the packet number (assigned by Wireshark; this is not a packet number contained in any
protocol’s header), the time at which the packet was captured, the packet’s source and
destination addresses, the protocol type, and protocol-specific information contained in the
packet. The packet listing can be sorted according to any of these categories by clicking on a
column name. The protocol type field lists the highest-level protocol that sent or received
this packet, i.e., the protocol that is the source or ultimate sink for this packet.
 The packet-header details window provides details about the packet selected (highlighted)
in the packet-listing window. (To select a packet in the packet-listing window, place the
cursor over the packet’s one-line summary in the packet-listing window and click with the
left mouse button.). These details include information about the Ethernet frame (assuming
the packet was sent/received over an Ethernet interface) and IP datagram that contains this
packet. The amount of Ethernet and IP-layer detail displayed can be expanded or minimized
by clicking on the plus minus boxes to the left of the Ethernet frame or IP datagram line in
the packet details window. If the packet has been carried over TCP or UDP, TCP or UDP
details will also be displayed, which can similarly be expanded or minimized. Finally, details
about the highest-level protocol that sent or received this packet are also provided.
 The packet-contents window displays the entire contents of the captured frame, in both
ASCII and hexadecimal format.

This lab content is from the lab materials of the book “Computer Networking: a Top-Down
Approach.”
HCMC International University Dr. Phuong Vo

 Towards the top of the Wireshark graphical user interface, is the packet display filter field,
into which a protocol name or other information can be entered in order to filter the
information displayed in the packet-listing window (and hence the packet-header and packet-
contents windows). In the example below, we’ll use the packet-display filter field to have
Wireshark hide (not display) packets except those that correspond to HTTP messages.

Taking Wireshark for a Test Run

The best way to learn about any new piece of software is to try it out! We’ll assume that your
computer is connected to the Internet via a wired Ethernet interface. Indeed, I recommend that you
do this first lab on a computer that has a wired Ethernet connection, rather than just a wireless
connection. Do the following

1. Start up your favorite web browser, which will display your selected homepage.

2. Start up the Wireshark software. You will initially see a window similar to that shown in
Figure 2. Wireshark has not yet begun capturing packets.

3. To begin packet capture, select the Capture pull down menu and select Interfaces. This will
cause the “Wireshark: Capture Interfaces” window to be displayed, as shown in Figure 4.

Figure
4: Wireshark Capture Interface Window

4. You’ll see a list of the interfaces on your computer as well as a count of the packets that have
been observed on that interface so far. Click on Start for the interface on which you want to
begin packet capture (in the case, the Gigabit network Connection). Packet capture will now
begin - Wireshark is now capturing all packets being sent/received from/by your computer!

5. Once you begin packet capture, a window similar to that shown in Figure 3 will appear. This
window shows the packets being captured. By selecting Capture pulldown menu and
selecting Stop, you can stop packet capture. But don’t stop packet capture yet. Let’s capture
some interesting packets first. To do so, we’ll need to generate some network traffic. Let’s
do so using a web browser, which will use the HTTP protocol that we will study in detail in
class to download content from a website.

6. While Wireshark is running, enter the URL:

http://gaia.cs.umass.edu/wireshark-labs/INTRO-wireshark-file1.html
and have that page displayed in your browser. In order to display this page, your browser will

This lab content is from the lab materials of the book “Computer Networking: a Top-Down
Approach.”
HCMC International University Dr. Phuong Vo

contact the HTTP server at gaia.cs.umass.edu and exchange HTTP messages with the server
in order to download this page, as discussed in section 2.2 of the text. The Ethernet frames
containing these HTTP messages (as well as all other frames passing through your Ethernet
adapter) will be captured by Wireshark.

7. After your browser has displayed the INTRO-wireshark-file1.html page (it is a simple one
line of congratulations), stop Wireshark packet capture by selecting stop in the Wireshark
capture window. The main Wireshark window should now look similar to Figure 3. You now
have live packet data that contains all protocol messages exchanged between your computer
and other network entities! The HTTP message exchanges with the gaia.cs.umass.edu web
server should appear somewhere in the listing of packets captured. But there will be many
other types of packets displayed as well (see, e.g., the many different protocol types shown in
the Protocol column in Figure 3). Even though the only action you took was to download a
web page, there were evidently many other protocols running on your computer that are
unseen by the user. We’ll learn much more about these protocols as we progress through the
text! For now, you should just be aware that there is often much more going on than “meet’s
the eye”!

8. Type in “http” (without the quotes, and in lower case – all protocol names are in lower case in
Wireshark) into the display filter specification window at the top of the main Wireshark
window. Then select Apply (to the right of where you entered “http”). This will cause only
HTTP message to be displayed in the packet-listing window.

9. Find the HTTP GET message that was sent from your computer to the gaia.cs.umass.edu
HTTP server. (Look for an HTTP GET message in the “listing of captured packets” portion of
the Wireshark window (see Figure 3) that shows “GET” followed by the gaia.cs.umass.edu
URL that you entered. When you select the HTTP GET message, the Ethernet frame, IP
datagram, TCP segment, and HTTP message header information will be displayed in the
packet-header window1. By clicking on ‘+’ and ‘-‘ right-pointing and down-pointing
arrowheads to the left side of the packet details window, minimize the amount of Frame,
Ethernet, Internet Protocol, and Transmission Control Protocol information displayed.
Maximize the amount information displayed about the HTTP protocol. Your Wireshark
display should now look roughly as shown in Figure 5. (Note, in particular, the minimized
amount of protocol information for all protocols except HTTP, and the maximized amount of
protocol information for HTTP in the packet-header window).

10. Exit Wireshark

1
Recall that the HTTP GET message that is sent to the gaia.cs.umass.edu web server is contained
within a TCP segment, which is contained (encapsulated) in an IP datagram, which is encapsulated in
an Ethernet frame. If this process of encapsulation isn’t quite clear yet, review section 1.5 in the text

This lab content is from the lab materials of the book “Computer Networking: a Top-Down
Approach.”
HCMC International University Dr. Phuong Vo

Figure 5: Wireshark window after step 9

Answer the following questions

The goal of this first lab was primarily to introduce you to Wireshark. The following questions will
demonstrate that you’ve been able to get Wireshark up and running, and have explored some of its
capabilities. Answer the following questions, based on your Wireshark experimentation:

1. List 3 different protocols that appear in the protocol column in the unfiltered packet-listing
window in step 7 above.
TCP, UDP, SSDP, HTTP
.................................................................................................................................................
.................................................................................................................................................
.................................................................................................................................................

2. How long did it take from when the HTTP GET message was sent until the HTTP OK reply
was received? (By default, the value of the Time column in the packet-listing window is the
amount of time, in seconds, since Wireshark tracing began. To display the Time field in time-
of-day format, select the Wireshark View pull down menu, then select Time Display Format,
then select Time-of-day.)

This lab content is from the lab materials of the book “Computer Networking: a Top-Down
Approach.”
HCMC International University Dr. Phuong Vo

Nearly 0.33 sec very small.......................................................................................................

.................................................................................................................................................
.................................................................................................................................................

3. What is the Internet address of the gaia.cs.umass.edu (also known as www-

net.cs.umass.edu)? What is the Internet address of your computer?
Internet address of the gaia.cs.umass.edu is 128.119.245.12 , Internet address of my
computer is 10.182.219.167
.................................................................................................................................................
.................................................................................................................................................
4. Print the two HTTP messages (GET and OK) referred to in question 2 above. To do so, select
Print from the Wireshark File command menu, and select the “Selected Packet Only” and
“Print as displayed” radial buttons, and then click OK.

This lab content is from the lab materials of the book “Computer Networking: a Top-Down
Approach.”
HCMC International University Dr. Phuong Vo

This lab content is from the lab materials of the book “Computer Networking: a Top-Down
Approach.”
HCMC International University Dr. Phuong Vo

THE END.

This lab content is from the lab materials of the book “Computer Networking: a Top-Down
Approach.”