LC.D40A 80A - LC - DT60A 80A - MRE000000G Revision2

Certificate No:
MRE000000G
Revision No:
2
In accordance with Article 10.1 of EU Regulation 391/2009
This Certificate is issued to

Schneider Electric Industries SAS
Eybens, France
for
Contactors
with type designation(s)

Tesys D LC1/ LC2
The product is found to comply with

EU RO Mutual Recognition Technical Requirements for Contactors
Intended service
Contactors and reversing / pole-changing contactors with ac control circuit for installation in enclosures
onboard ship and mobile offshore units.
Rated Voltage (V) 600 / 690

Rated Current (A) 60-80
Frequency (Hz) 50 / 60
This is to certify:
that the Product referred to herein has been inspected for the Manufacturer, pursuant to the relevant requirements of the
European Union Recognised Organisation Mutual Recognition procedure, required by Article 10.1 of EU Regulation
391/2009, and has been found in accordance with those requirements.
This Certificate is valid until 2028-10-22.
Issued at Høvik on 2023-11-08

for DNV
DNV local unit: France CMC Digitally Signed By: Elter, Frederik Tore
Location: DNV Høvik, Norway
Approval Engineer: Nicolay Horn
Frederik Tore Elter

Head of Section
This Certificate is subject to terms and conditions overleaf. Any significant change in design or construction may render this Certificate invalid.
The validity date relates to the Type Approval Certificate and not to the approval of equipment/systems installed.
LEGAL DISCLAIMER: Unless otherwise stated in the applicable contract with the holder of this document, or following from mandatory law, the liability of DNV AS, its
parent companies and their subsidiaries as well as their officers, directors and employees (“DNV”) arising from or in connection with the services rendered for the
purpose of the issuance of this document or reliance thereon, whether in contract or in tort (including negligence), shall be limited to direct losses and under any
circumstance be limited to 300,000 USD.
Form code: MRTA 201 Revision: 2022-12 www.dnv.com Page 1 of 4
Job Id: 262.4-000142-2
Certificate No: MRE000000G
Revision No: 2
Product description
Single contactors ( LC1) and reversing contactor (LC2) with ac or dc coils electromechanical or electronic. Contactor
equipped with one NO and one NC contact.
Rated insulation voltage (Ui): 600/690V *

Rated impulse voltage (Uimp): 6kV
Electrical ratings:
Type Ith Ue 230 V 400V 440V 500V 690V*
designation Utilization category
LC1/LC2-D40A 60 A Ie (AC-3) 38 A 35 A 40 A 33 A 32 A
Ie (AC-3e) 38 A 35 A 40 A 33 A 21 A
Ie (AC-4) 38 A 35 A 40 A 33 A 21 A
Ie (AC-1) 60 A
Ie (AC-3e) 51 A 41 A 50 A 44 A 35 A
Ie (AC-4) 51 A 41 A 50 A 33 A 21 A
Ie (AC-1) 80 A
Ie (AC-3e) 61 A 55 A 65 A 53 A 39 A
Ie (AC-4) 61 A 55 A 50 A 33 A 21 A
Ie (AC-1) 80 A
Ie (AC-3e) 80 A 80 A 66 A 53 A 39 A
Ie (AC-4) 61 A 55 A 50 A 33 A 21 A
Ie (AC-1) 80 A
LC1-DT60A 60 A Ie (AC-1) 60 A
LC1-DT80A 80 A Ie (AC-1) 80 A
Rated conditional short-circuit current:

Type designation Prospective short-circuit current (kA) SCPD
LC1/LC2-D40A Ir (440V) 3 40 A aM fuse
Iq (440V) 50
Ir (690V)* 3
Iq (690 V)* 3
Iq (440V) 50
Ir (690V)* 3
Iq (690 V)* 3
LC1/LC2-D80A Iq (440V) 50 80 A aM fuse
Ir (690V)* 3
Iq (690 V)* 3
LC1-DT60A Iq (690V) 3 125 A gG fuse
Ir (690V)* 3
LC1-DT80A Iq (690V) 5 125 A gG fuse
Ir (690V)* 5
* See application / limitation
Manufactured by
Schneider Electric Industries SAS PT. Schneider Electric Manufacturing Batam
Le Vaudreuil, France Batamindo Industrial Park, Lot 4, Muka Kuning
Batam, 29433, Indonesia

Job Id: 262.4-000142-2
Revision No: 2
Application/Limitation
With Uimp = 6 kV the max. rated voltage is 600 V when used in a IT (ship) net. It can be used in applications with
directly earthed systems with rated voltage of 400/690 V.
Name Number Date

«TeSys D, D Green, SK, K, SKGC, GC, GY, GF – Technical Data for part of cataloge
Designers»
TeSys d contactors – Marine certification file” part 1, item 3 “Electrical 2008-11-26
ratings”
”TeSys d contactors – Marine certification file” part 4 (binder 1/1 & 1 / 2) 2008-11-26
Test report 201703851_002, 003, & 004 2017-09-01
Test report 201604841_061,_062, &_63 2017-01-12 &
Test report 201604841_016 13
2017-02-24
Test report 2426-46-TL3-1 & 2426-46-TL3-2 2017-12-20
Test report 143029-688903A2 2016-11-30
Test report 143029-688903B2 2016-11-30
Test report 144414-692749 2017-01-16
Test report 146109-698338 2017-01-16
Test report 150529-710258 2018-01-24
Test report 155413-720935 2018-07-02
Test report 150698-710269 2018-01-24
Test report 150697-709694 2018-01-24
Test report 128422-665184-B00 2014-03-03
Test report 128422-665184-B01 to –B07 2015-03-03
Test report 128422-665184-A00 2014-03-03
Test report 128422-665184-A01 to –A07 2015-03-03
Certificate FR 665184B_M2 and FR 665184A 2018-03-20
Certificate FR 700311_M2 2018-08-29
Marking of product
Telemecanique / Schneider Electric – Type designation
Other Conditions
Electrical tests after IEC 60947, Environmental tests after DNVGL-CG-0339 Novemberl 2015 (Power supply variation,
power supply failor, dielectric, insulation, inclination, vibration, cold, dry heat and damp heat).
Periodical assessment
The scope of the periodical assessment is to verify that the conditions stipulated for the Type approval is complied with
and that no alterations are made to the product design or choice of materials.
The main elements of the assessment are:
• Inspection on factory samples, selected at random from the production line (where practicable).
• Results from Routines (RT) checked (if not available tests RT to be carried out).
• Review of type approval documentation.
• Review of possible change in design, materials and performance.
• Ensure traceability between manufacturer’s product marking and the DNVGL EU MR Type Approval
Certificate.
Assessment to be performed annually and at renewal.

Job Id: 262.4-000142-2
Revision No: 2
Generic Statement for EU RO MR Type Approval Certificate

When a product is presented with this EU RO MR Type Approval Certificate for given application, its acceptability with
regards to the limitations stated in the certificate conditions defined in 1b, 1c and 1d of the applied Technical
Requirement will be evaluated by the EU RO in charge of classing the ship or being in charge of the unit/system
certification.
In accordance with Article 10 of Regulation (EC) No 391/2009 of the European Parliament and of the Council of 23 April
2009 "on common rules and standards for ship inspection and survey organizations", the following organizations,
recognized by the EU on this date, have agreed on the technical and procedural conditions under which they will
mutually recognize this certificate:
• American Bureau of Shipping (ABS);

• Bureau Veritas (BV);
• China Classification Society (CCS);
• Croatian Register of Shipping (CRS);
• DNV;
• Indian Register of Shipping (IRS);
• Korean Register (KR);
• Lloyd's Register Group Ltd. (LR);
• Nippon Kaiji Kyokai General Incorporated Foundation (ClassNK);
• Polish Register of Shipping (PRS);
• RINA Services S.p.A. (RINA);
• Russian Maritime Register of Shipping (RS).
The scheme for the mutual recognition of class certificates for materials, equipment and components laid down by
Article 10(1) of Regulation (EC) No 391/2009 is only enforceable within the Union in respect of ships flying the flag of a
Member State. As far as foreign vessels are concerned, the acceptance of relevant certificates remains at the discretion
of relevant non-EU flag States in the exercise of their exclusive jurisdiction, notably under the United Nations
Convention on the Law of the Sea (UNCLOS). (In accordance with COMMISSION IMPLEMENTING REGULATION
(EU) No 1355/2014 amending Regulation (EC) No 391/2009 - recital (25)).
END OF CERTIFICATE

LC.D40A 80A - LC - DT60A 80A - MRE000000G Revision2

Uploaded by

Copyright:

Available Formats

LC.D40A 80A - LC - DT60A 80A - MRE000000G Revision2

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

LC.D40A 80A - LC - DT60A 80A - MRE000000G Revision2

Uploaded by

Copyright:

Available Formats

Certificate No:

In accordance with Article 10.1 of EU Regulation 391/2009

This Certificate is issued to

with type designation(s)

The product is found to comply with

Rated Voltage (V) 600 / 690

This Certificate is valid until 2028-10-22.

Issued at Høvik on 2023-11-08

Frederik Tore Elter

Rated insulation voltage (Ui): 600/690V *

Rated conditional short-circuit current:

Form code: MRTA 201 Revision: 2022-12 www.dnv.com Page 2 of 4

Name Number Date

Assessment to be performed annually and at renewal.

Form code: MRTA 201 Revision: 2022-12 www.dnv.com Page 3 of 4

Generic Statement for EU RO MR Type Approval Certificate

• American Bureau of Shipping (ABS);

Form code: MRTA 201 Revision: 2022-12 www.dnv.com Page 4 of 4

You might also like