www. SEESinc.

com

TOOLS - LUBRICANTS QUICK LOCATOR GUIDE

TOOLS / LUBRICANTS
Books, Elevator Manuals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 489
Brush Tension Scale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 483
Burnishing Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 481
Cable Jacket Remover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 477
Caliper, Wire Rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 478
Cleaners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 486-487
Commutator Dressing and Finishing Stones . . . . . . . . . . . . . . . . . . . . . . . . . 481
Commutator Treating Kit, Brush Seating Stones . . . . . . . . . . . . . . . . . . . . . 480
Contact Burnishing Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 477
Diamond Spatulas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 483
Door Sill Brush . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 475
Door Wedge Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 475
Flexible Files, Abrasives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 482
Ground Fault Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 476
Hydraulic Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 468-469
Jumper Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 465
Lamp and Fuse Removers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 475
Lights, Drop Light, Flashlight, Area Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . 478
Lock Out Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 476
Lubricants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 485-486
Meters, AC/DC Clamp on, Special Purpose . . . . . . . . . . . . . . . . . . . . . . . 470-474
Multi-Meter Accessory Test Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 464
Multi-Meter Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 470
Parameter Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 478
Pressure Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 464
Rail Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 476
Rail Files, Holder, Handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 477
Rail Lubricator and Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 486
Relay Adjuster’s Tool Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 480
Relay Testers, Multi-Volt Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 479
Rope Oilers and Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 486
Screwdrivers and Fasteners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 485
Sealants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 486-487
SEES Library, Reference Manuals, Handbooks . . . . . . . . . . . . . . . . . . . . . . . 489
SEES Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 488
Solder Pot and Babbit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 485
Stud Welding Gun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 480
Tachometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 464
Tape Measure, Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 475
Tool Box and Tool Bags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 483
Under Cutter, Mica Miller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 483
Vacuum Glass Handler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 475
Weight Test Cart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 476
Wire Rope Measuring Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 477

954.971.1115 / fax 954.917.7337 800.526.0026

463
 www. SEESinc.com

Tools S.E.E.S. # O.E.M. # Description

TOOLS / LUBRICANTS

MIS-MTR-014 TK31A  ulti-Meter Accessory Test

M
Kit, with carrying case. 4pc.
Multi-Meter not included
MIS-MTR-015 Manual Ranging Multi Mini
Meter
MIS-MTR-016 Auto Ranging Multi Mini
Meter
MIS-MTR-050 24924 Flow Meter, LCD 26 GPM Flow
300 psi Max
MIS-MTR-051 24923 Flow Meter, Mechanical
32GPM 50 psi
MIS-MTR-014

MIS-216A

MIS-MTR-050 MIS-MTR-051
MIS-216B

Tachometer
The latest in micro-computer technology assures complete accuracy in measuring rotational,
linear, and surface speeds. This battery operated device offers a wide speed range, large memory
capacity, multi-mode speed selection, low voltage indicator, and an easy reading digital display
window. Accessories included.

S.E.E.S. # Description
MIS-216 Digital Handheld Tachometer, DT-105
MIS-216A Wheel Assembly replacement for MIS-216, 6" circumference
MIS-216B Tach Wheel 12" circumference

MIS-216

MIS-211

MIS-211C

Door Pressure Gauges

S.E.E.S. # O.E.M. # Description
MIS-211 Door Pressure Gauge
MIS-211C  Door Force Gauge, SEES Door Force
Measurement System
MIS-211E 475055  Digital Force Gauge, 220lbs & 980N,
Measures Tension/Compression
MIS-211B SE72142.5.25-1K Gauge Kit, 0-1 PSI, with 1/4" NPT center
MIS-211E back mounting

800.526.0026 954.971.1115 / fax 954.917.7337

464
www. SEESinc.com

Jumper Kit

TOOLS / LUBRICANTS
S.E.E.S. # Description
SEES-JUMPER-001 SEES Jumper Kit, used for temporarily jumping out circuits while
under repair. Jumper test lead with pouch, includes alligator
clip, spring loaded plunger, lug terminal, + SEES Jumper Band
SEES-JUMPER-001F SEES Fused Jumper Kit, Jumper test lead kit with pouch,
250V / 0.5A Glass Fuse
SEES-JUMPER-001K SEES Jumper Kit, Test Kit with Pouch and Wrist Band
SEES-JUMPER-002 SEES Jumper, Time Out
SEES-JUMPER-003 SEES Jumper, Banana Plug 2mm x 60", Long Red 18AWG
SEES-JUMPER-004 SEES Jumper, Tip Black
SEES-JUMPER-005 SEES Jumper, Tip Red
SEES-JUMPER-006 SEES Jumper kit, 3 Gator Clips 6 Test Pins, Pouch, Wrist Band
SEES-JUMPER-007 Magnetic Jumper
SEES-JUMPER-008 Safety Labels, Bag of 25 Self Adhesive for Jumper Wires
SEES-JUMPER-009 Jumper Adapter, Bag of 4
SEES-JUMPER-BAND Wrist Band Safety Reminder, wear while performing circuit
repair, remove when job is completed and jumpers are
removed. Band is marked, “No Jumper Left Behind” SEES-JUMPER-001
SEES-JUMPER-POUCH SEES, Jumper Pouch Only Blue with Velcro

SEES-JUMPER-BAND
SEES-JUMPER-003
Pumps SEES-JUMPER-005
S.E.E.S. # Description
MIS-TOOL-150 Dynamometer / Scale, 5,000 lbs. 5" diameter face with case
MIS-TOOL-200 Transfer Pump, 115V 5/8 inch ports, 300 GPH
MIS-TOOL-201 Ports Utility Pump, 1/2 HP, 3/4in. 115V, 100 psi SEES-JUMPER-POUCH MIS-TOOL-150

Valve Shut-Off Lever

S.E.E.S. # Description
SEES-TOOL-001 Valve Shut-Off Lever, Dover, 12" Long

Voltage Detectors SEES-TOOL-001

S.E.E.S. # Description
SEES-TOOL-002 Voltage Detector, with Light, No Brand MIS-TOOL-200
SEES-TOOL-002S Voltage Detector, with Light, SEES Brand

Hand Taps
S.E.E.S. # Description SEES-TOOL-002

MIS-TOOL-120 Hand Tap, 1/4" Standard

MIS-TOOL-121 Hand Tap, 3/8" Standard
MIS-TOOL-122 Hand Tap, 5/16" Standard

Smartrise Tool
S.E.E.S. # Description
SEES-SMARTRISE-TOOL Smartrise Debug Tool SEES-SMARTRISE-TOOL

954.971.1115 / fax 954.917.7337 800.526.0026

465
 www. SEESinc.com

Hydraulic Tools
TOOLS / LUBRICANTS

S.E.E.S.# MIS-FLT-001
Specifications
• 3/4 HP
• 10 GPM Pump
• 6 Micron Rated Filter
• Sump Strainer
• 9' Electric Cable
• 8" Hoses
• 10" Pneumatic Tires
MIS-FLT-001P
MIS-FLT-002M
MIS-FLT-007

S.E.E.S. # Description
MIS-FLT-001 Portable Filter Cart
MIS-FLT-001P  Oil Cart Pump, Replacement
MIS-FLT-002  Kidney Loop Filtration System without mounting Kit
MIS-FLT-002M  Kidney Loop Filtration System with mounting Kit
MIS-FLT-007  Breather, Desiccant and Activated Carbon Moisture
MIS-FLT-008
and Odor Control
MIS-FLT-008 Breather, Adapter
MIS-FLT-009 Gasket Material
MIS-FLT-010 Pressure Gauge, 2-1/2" Face, 0-600 PSI, 1/4" NPT
MIS-FLT-012 Suction Strainer, 3/4" NPT
MIS-FLT-009 MIS-FLT-013 Ball Valve, Low Pressure 1-1/2" Full Flow
MIS-FLT-IM284 Motor Generator Filter, 284A, 2 Cubes, 2 Panels
MIS-FLT-R1 Replacement Element Cartridge, Particle Removal,
for MIS-FLT-001
MIS-FLT-R2 Replacement Element Cartridge, Water Removal,
MIS-FLT-010
for MIS-FLT-001
MIS-FLT-R3 Particulate Removal Element
MIS-FLT-WH5014A Filter set frame, 5014A 4 Panels
MIS-OIL-COOLER-001 Oil Cooler, hydraulic heat exchanger, 26,100 BTU/Hr
Single Phase, 115/230V w/ hose, remote mount air
to oil with Hydro motor and thermostat control
MIS-OIL-COOLER-003 Tank Cooler, direct mount over top of tank, requires
no plumbing, 2,000 BTU/Hr, 36" x 14" x 8", auto start at
120° F
MIS-FLT-R2 MIS-OIL-COOLER-FAN Fan, Cooler AOC Series
MIS-OIL-COOLER-PUMP Pump, Oil Cooler, Used on MEI’s AOC and BOL

MIS-FLT-R1

MIS-FLT-012
MIS-FLT-R3

MIS-OIL-COOLER-001

800.526.0026 954.971.1115 / fax 954.917.7337

468
www. SEESinc.com

Hydraulic Tools

TOOLS / LUBRICANTS
SEES Pressure Gauges and Adaptors
S.E.E.S. # Description
SEES-HYD-PG SEES pressure gauge, 1K PSI, for tanks, with ball valve
Pressure gauge elbow adaptor, for Thyssen, fits 1/8" NPT x 1.26" OAL
SEES-HYD-PG-001
Pressure gauge elbow adaptor, for Otis, fits 1/4" NPT x 1.52" OAL
SEES-HYD-PG-002
Pressure gauge elbow adaptor, for Kone, fits 3/8" NPT x 1.76" OAL
SEES-HYD-PG-003
Pressure gauge elbow adaptor, fits 1/4" NPT x 1.81" OAL
SEES-HYD-PG-004
SEES pressure gauge adaptor kit, for Thyssen, Otis, Kone and other
SEES-HYD-PG-005
SEES pressure gauge & hose, 1K PSI, with quick connect
SEES-HYD-PG-006
SEES pressure gauge kit, all adaptors, pressure gauge and hose
SEES-HYD-PG-007
Hose Only, 3 ft with 1/4" FNPT x 1/8" MNPT
SEES-HYD-PG-008
Quick Disconnect, Female, 1/2-14 ISO 7241-1 Series B
SEES-HYD-PG-009
SEES-HYD-PGP SEES Hydro Pressure Gauge Port, quick release only
SEES-HYD-PGPF SEES Hydro Pressure Gauge Port, Female quick release with 90 deg 1/8 elbow

SEES-HYD-PG-001 SEES-HYD-PG-002 SEES-HYD-PG-003

SEES-HYD-PG

SEES-HYD-PG-006

SEES-HYD-PG-004
SEES-HYD-PG-005

SEES-HYD-PG-008

SEES-HYD-PGP
SEES-HYD-PG-007

S.E.E.S. # O.E.M. # Description

MIS-211B SE72142.5.25-1K Gauge Kit, 0-1 PSI, with 1/4" NPT center back mounting
MIS-211B

954.971.1115 / fax 954.917.7337 800.526.0026

469
 www. SEESinc.com

Tools
TOOLS / LUBRICANTS

Multi-Meter Selection Guide

S.E.E.S. # MIS-MTR-005 MIS-MTR-001 MIS-MTR-002 MIS-MTR-003 MIS-MTR-004 MIS-MTR-006
Model MN-26 EX-410 EX-430 EX-470 MP-530 MM-570
Key Features Compact Size Best value with Infa Red Auto ranging “Highest
DMM functions Thermometer and RS-232 Precision and
and features at with laser PC Interface resolution w/
a low cost 50,000 and
500,000 counts”
Special Functions
Basic Accuracy (VDC) 1% 0.50% 0.30% 0.30% 0.08% 0.02%
Temperature (Type K) * * * * * *
Temperature (InfraRed) *
Capacitance * * * * *
Frequency * * * * *
Logic Test
Transistor
Battery Test
Signal Output
Duty Cycle * * * *
Pulse/Period Width

Features
True RMS * * * *
Autoranging * * * * *
Counts 4000 2000 4000 4000 5000 50,000/500,000
Backlit Display * * * * *
Data Hold * * * * * *
Auto Power Off * * * * * *
Bargraph * *
Relative * * * * *
Peak Hold * *
Min/Max * *
Input Alert * * *
Data logging
PC Interface * *
Software OPTIONAL OPTIONAL
Category Rating CAT II 600V CAT III 600V CAT III 600V CAT III 600V CAT III 600V CAT III 600V
CE/UL CE/UL CE/UL CE/UL CE/UL CE/UL CE/UL
Warranty 1 YEAR 1 YEAR 3 YEARS 3 YEARS 3 YEARS 3 YEARS

800.526.0026 954.971.1115 / fax 954.917.7337

470
www. SEESinc.com

Tools

TOOLS / LUBRICANTS
AC/DC Clamp on Meters
S.E.E.S. # MIS-MTR-008 S.E.E.S. # MIS-MTR-009
Features: Features:
• Maximum AC current of 600A • Full function auto ranging DMM includes AC/DC Voltage
• Measure AC Current, AC/DC Voltage and Resistance and Current, Resistance, Capacitance, Frequency, Duty
• Data Hold “freezes” data in display Cycle, Diode and Continuity
• 1.25" (33mm) circular jaw opening for large cables (350MCM) • Current measurements to 2000A through the clamp and
• Peak Hold captures in-rush currents 240mA via test leads
• Audible Continuity beeper • Large 5000 count backlit display for high resolution and
• Auto power off easy viewing in dimly lit areas
• Complete with test leads, 9V battery, and carrying case • Basic DCV accuracy of 1% with 0.1mV resolution and
• True RMS voltage and current measurements current resolution to 0.1µA
• AC/DC current to 600A • Rugged 2.36" jaws accommodate one 2000MCM or two
• Large 4000 count LCD display 500MCM cables
• Capacitance measurements • Features include DCA push button zero, Relative
• Temperature measurements measurements and Data Hold
• Includes temperature probe • Heavy duty ABS case with built-in stand and thumb
control function switch
Specifications: • Complete with test leads and 9V battery
AC Current: 400A, 600A (Trms) (100mA)
DC Current: 400A, 600A (100mA) Specifications Ranges Max. Resolution Basic Accuracy
DC Voltage: 400mV, 4V, 40V, 400V, 600V (0.1mV) (%rdg+digits)
AC Voltage: 4V, 40V, 400V, 600V (Trms) (1mV)
DC/AC Current (Clamp): 240A, 2000A 0.1A ±(2% + 5d)
Resistance: 400Ω, 4kΩ, 40kΩ, 400kΩ, 4MΩ, 40MΩ (0.1Ω
DC/AC Current (DMM): 240µA, 2400µA, 24mA, 240mA 0.1µA
Capacitance: 40nF, 400nF, 4µF, 40µF, 100µF (0.01nF)
±(1.2% + 5d)
Temperature: -4 to 1400°F, -20 to 760°C (1°F/°C)
DC Voltage: 240mV, 2.4V, 24V, 240V, 1000V 0.1mV
Continuity: yes
±(1% + 2d)
Power: 9V battery
AC Voltage: 2.4V, 24V, 240V, 1000V 1mV
Dimensions: 3.1 x 8 x 1.6" (79 x 203 x 41mm)
±(1.2% + 5d)
Weight: 6.5oz (185g)
Capacitance: 25nF, 250nF, 2.5µF, 25µF 0.01µF
±(3% + 5d)
Basic Accuracy (%rdg+digits) Resistance: 240Ω, 2.4kΩ, 24kΩ, 240kΩ, 2.4MΩ,
±(3.5% + 5d) 24MΩ 0.1Ω ±(1% + 5d)
±(3.5% + 3d) Frequency: 50Hz, 500Hz, 5kHz, 50kHz, 100kHz
±(0.5% + 2d) 0.001Hz ±(1% + 5d)
±(0.8% + 3d) Duty Cycle: 0.1% to 99.9% 0.1% ±(1% + 5d)
±(1% + 4d) Diode Check: yes
±(3.5% + 5d) Continuity: yes
±(3.0% + 3°F/°C) Dimensions/Weight: 10 x 2.9 x 1.5" (255 x 73 x 38mm)/14oz. (380g)

954.971.1115 / fax 954.917.7337 800.526.0026

471
 www. SEESinc.com

Tools
TOOLS / LUBRICANTS

Special Purpose Meters

S.E.E.S. # MIS-MTR-011
Digital Sound Level Meter
S.E.E.S. # MIS-MTR-010 Big Display, RS-232 interface, and Background Noise Absorber

Wide Range Infrared Thermometer Features:

Non-contact Infrared Thermometer with laser pointer • Auto/Manual ranging from 30 to 130dB in 6 ranges
measures to 1000°F • Meets ANSI and IEC Type 2 standards
• A and C selectable frequency weightings
Features: • Fast and Slow selectable response times
• Wide range temperature measurements from • Background noise absorber mode for machine noise
-54°F to 1000°F without contact measurements filters ambient noise
• Large LCD display with backlighting • Large 3 1/2 digit display with 0.1dB resolution
with backlighting and analog bar graph
• Built-in laser pointer to improve aim
• Electret condenser microphone provides 1.5dB accuracy
• °F/°C switchable • Min/Max plus analog output and tripod mount
• Fixed emissivity (0.95) covers 90% of surface applications • Max Hold latches maximum value on display
• Narrow field of view • RS-232 interface for capturing data directly
• Audible and visible overrange indicators on a PC, optional Windows® compatible software
• Automatic Data Hold • Complete with batteries and carrying case
Applications: Applications:
• Measure surface temperature of objects which • Machine noise evaluation
are difficult to reach or unsafe to contact • OSHA compliance testing
• Measure hot spots in electrical panels and equipment • Community noise measurement
• In-process temperature measurements • Noise ordinance
• PC interface for data collection
Specifications:
Range: -58 to 1000°F or -50 to 538°C Digital Display: 3-1/2 digit (1999 count) Autorange LCD
Bargraph Display: 50dB display range (1dB resolution);
Accuracy: ±2% of reading or ±4°F/ 2°C (whichever is
Measurement Range: 30 to 130dB (35 to 130dB for “C” weighting)
greater) Resolution: 0.1dB
Resolution: 0.1°F/°C Accuracy: ±1.5 dB @ 94dB for a 1kHz sine wave
Emissivity: 0.95 fixed Microphone: Electret Condensor .24" (6mm dia.) type
Display: Backlit LCD Frequency Weighting: “A” and “C” type
Power: 9V battery Time Response: Slow/Fast
Field of view: 8:1 (at 8" distance measure 1" target) Sampling time: updates every 0.5 seconds
Dimensions: 8.3 x 3.5 x 1.5" (211 x 89 x 38mm) Measurement 31.5Hz to 8KHz
Weight: 6.4oz. (200g) frequency range:
Analog output: AC: 0.707Vrms (full scale);
DC: 10mVDC/dB
Applicable Standards: IEC 651 Type 2, ANSI S1.4 Type 2
Power Supply: 9V battery, optional AC adaptor
Dimensions: 10 x 3.1 x 1.5" (256 x 80 x 38mm)
Weight: 8.5oz. (240g)

800.526.0026 954.971.1115 / fax 954.917.7337

472
www. SEESinc.com

Tools

TOOLS / LUBRICANTS
Special Purpose Meters

S.E.E.S. # MIS-MTR-011A
S.E.E.S. # MIS-MTR-012
Digital Sound Level Meter
30-130dB(A) Range with Sound Simulation, Max/Min/Data Hold, Combination Tachometer
Fast/Slow Mode, Self-Calibration Noise Meter Battery operated non-contact motion and RPM measurements
Features: Features:
• Frequency weighting: A • Unique display where characters reverse direction
• Frequency response: 31.5Hz — 8KHz depending on measurement mode you are in
• Level ranges: 30dB 130dB (resolution: 0.1dB) • Large 0.4" 5 digit LCD digital display
• Response time: (FAST)125ms,(SLOW)1000ms • Microprocessor based with quartz crystal oscillator
• Overload indication: 30dB (UN display), 130dB (OL
to maintain high accuracy
display)
• Accuracy: ±1.5dB (@1KHz Standard source) • Tachometer memory stores last, max and min readings
• Auto power off: Auto shut down after approx 10 minutes • Provides wide RPM (photo) and Linear Surface Speed
of inactivity (contact) measurements
• Low battery indication: 6V • Microprocessor precision, accurate to 0.05%
• Sensor: 1/2 inch electret condenser microphone • Permits readings to a resolution of 0.1 RPM in either
photo or contact mode
Applications: • Complete with wheels for linear surface speed or RPM
measurements, four 1.5 volt AA batteries, reflective tape
• Machine noise evaluation
and carrying case
• OSHA compliance testing
• Community noise measurement Applications:
• Noise ordinance
• Contact RPM Measurements for flywheels, conveyors,
• PC interface for data collection
pumps and elevators
Measurement Range: 30 to 130dB (35 to 130dB for “C” weighting) • Non-Contact RPM measurements for fans, motors & gears
Resolution: 0.1dB Specifications Ranges Basic Accuracy Range (RPM):
Accuracy: ±1.5 dB @ 94dB for a 1kHz sine wave 5 to 99,999 0.5 to 20,000
Microphone: Electret Condensor .24" (6mm dia.) type
Frequency Weighting: “A” and “C” type Accuracy: 0.05% of reading +1 digit
Time Response: Slow/Fast Sampling Time: 1 Sec > 60 RPM 1 Sec > 6 RPM
Sampling time: updates every 0.5 seconds Surface Speed: 0.2 to 6560 ft/min 0.05 to 1999.9m/min
Measurement 31.5Hz to 8KHz Resolution: 0.1 RPM (< 1,000 RPM) 1 RPM >1000 RPM
frequency range: Power: 4 AA batteries
Analog output: AC: 0.707Vrms (full scale); Dimensions: 8.5 x 2.6 x 1.5" (215 x 65 x 38 mm)
DC: 10mVDC/dB Weight: 10.6 oz (300 g)
Power Supply: 9V battery
Dimensions: 2.12 x 7.48 x 1.38 "
Weight: 6oz. (170g)

954.971.1115 / fax 954.917.7337 800.526.0026

473
 www. SEESinc.com

Tools
TOOLS / LUBRICANTS

MIS-MTR-032 MIS-MTR-034 MIS-MTR-035 MIS-MTR-036

Special Purpose Meters

S.E.E.S. # MIS-MTR-032 S.E.E.S. # MIS-MTR-034
Photo Thermal Imaging Infrared Camera
Meter, Light Measurement Up To 20,000Fc/20,000Lux

Features: Features:
• Pocket sized and fully automatic design makes it • Compact and rugged design with large display
incredibly easy-to-use even for first time users--perfect • Low range model measures to 2,000Fc/ 20,000Lux
for general purpose use • Data Hold and Min/Max readings
• 80 x 80 pixels for clear images • Auto power off
• Focus Free Lens
• 5 hour battery life
• 2.8" color LCD
• Only 12oz. S.E.E.S. # MIS-MTR-035
• Included memory card stores up to 500+ Radiometric
JPEG images. Each image can be analysed using the
included softaware. Multimeter Adaptor, Ft Candle Light, ranges (0 to 5000Fc)

Features:
Specifications :
• A low cost alternative to a full size meter with display -
Temperature range: 32 to 482°F simply plug into your multimeter for direct measurements
Resolution: 80 x 80 pixels in Foot candles
Accuracy: 2% • Three measurement ranges (0 to 5,000Fc) with 5%
Thermal Sensitivity: 0.1°C accuracy
• 1mV/Fc output

S.E.E.S. # MIS-MTR-033
S.E.E.S. # MIS-MTR-036
Temperature/Humidity Wall Meter
Light Meter, Foot Candle/Lux Incl Analog Output
Features:
• Min/Max reset Features:
• 1 AAA Battery
• Accurately displays light level in terms of Fc or Lux over
• 1" Digits on large LCD
three ranges
• Low battery indication
• Select fast (1 second) or slow (2 seconds) response time
• Complete with built-in tilt
• Analog output of 1mV per count for capturing readings to
stand, wall mounting
a recorder
bracket, and 1.5V AAA
battery

MIS-MTR-033

800.526.0026 954.971.1115 / fax 954.917.7337

474
www. SEESinc.com

Tools

TOOLS / LUBRICANTS
Door Wedge Tools
Safely perform maintenance and repair services with SEES series of door wedge tools DW-TOOL
(open, closed)
S.E.E.S. # O.E.M. # Description
DW-TOOL Door wedge tool
MIS-DW-T1 SAF165 Tool, Door Wedge with Knob and fire tab slots
MIS-DW-T2 SAF164 Tool, Door Wedge with Knob standard without slot
MIS-DW-T3 10-851 Door Wedge Tool, with Knob, narrow door stop, 3/8" W
SEES-DWT-001 SEES Door Wedge Tool, Blue Poly
SEES-DWT-002 SEES Door Wedge Tool, Black Poly
SEES-DWT-002MR SEES Door Wedge Tool, Metric, Rubber 70 Duro no slot
SEES-DWT-003 SEES Door Wedge Tool, Blue Poly with fire tab slot
SEES-DWT-004 SEES Door Wedge Tool, Black Poly with fire tab slot MIS-DW-T1
SEES-DWT-004R SEES Door Wedge Tool, Rubber 70 Duro with fire tab slot
SEES-DWT-005 SEES Spring Door Wedge Tool, Rubber Coated Spring Steel
SEES-DWT-006 SEES Door Wedge Tool, Stainless Steel Bottle Opener
DG-MT Door Gap, Measuring tool

MIS-DW-T2

SEES-DWT-001
SEES-DWT-004R
SEES-DWT-003

SEES-DWT-002

Steel Diameter Measuring Tape SEES-DWT-005

SEES-DWT-006
S.E.E.S. # Description
MIS-165 Steel Measuring Tape for measuring the diameter
of pistons or shafts. One side of this handy tape is
an inch measurement and the other side inches of
diameter by 64ths. Used to measure the circumference
of pistons. DG-MT
MIS-165

Lamp and Fuse Removers

S.E.E.S. # Description
MIS-175 Bulb Remover, a useful aid in removing all types
MIS-175 FM-100
of lamps from hard to reach lamp sockets.
FM-100 Fuse Puller Specialty Tool for easy fuse removal
and replacement
MIS-223 Yellow stick, insulated wire puller MIS-223
MIS-223A Orange stick, original, 7" long, 160 dia., 10 pack, wood

Door Sill Cleaning Brush

S.E.E.S. # Description
TH N
MIS-158 Door sill cleaning brush, heavy duty wire brush INK GREE
MIS-158
with wooden handle. It is the perfect tool for many jobs.

Vacuum Glass Handler

S.E.E.S. # Description
MIS-220 Vacuum Glass Handler Super grip double 5" diameter
vacuum cups to safely handle glass, 75lb Capacity
MIS-220A Vacuum Cup Lifter, 5" Dia Dual Cups, 150lb Capacity MIS-220 MIS-220A

954.971.1115 / fax 954.917.7337 800.526.0026

475
 www. SEESinc.com

Rail Blocks
TOOLS / LUBRICANTS

S.E.E.S. # Description
KOOL-RGB-001 Rail Guide Block, Brake Assembly with Inserts
KOOL-RGB-001A Rail Guide Block, Replacement Pad. M12, Old Design Heat Treated
MIS-118 KOOL-RGB-001B Rail Guide Block, Replacement Pad. M12, New Design Heat Treated
KOOL-RGB-001M Rail Guide Block, Magnet 3/4" O.D. x 1/2" TK
KOOL-RGB-002 Rail Guide Block, Remblok 30mm, Standard
KOOL-RGB-002A Rail Guide Block, Remblok 30mm
KOOL-RGB-003 Rail Guide Block, Remblok 40mm, Standard
KOOL-RGB-004 Rail Guide Block, Pivot Block Serrated
MIS-118A
MIS-118 Tool, Rail blocks for 5/8" rail, 25,000 lb rating/pair
MIS-118A Tool, Rail blocks for 5/8" rail with clevis (25,000lb/pair)
MIS-118B Replacement Set Screws, for Rail Blocks, (Set of 6)

MIS-118B
Ground Fault Protection
S.E.E.S. # Description
30334008 GFCI Plug, right angle, with triple tap 2 ft.
30334052 GFCI, right angle, protected quad outlet box
30338018 GFCI, in-line cord set 18"
30338024 GFCI, in-line with triple tap 3 ft
30339005 Adapter, 3-wire outlet

30334008

30334052
30339005
30338018 30338024

MIS-LOCK-001 Lock Out Tools

S.E.E.S. # Description
MIS-LOCK-001 Lock Out, for Switch 1-1/2" Shk Master Red K/A, with key #600F41
MIS-LOCK-001A Key, #600F41 Replacement for MIS-LOCK-001

Weight Test Cart

SEES-WC-002W S.E.E.S. # Description
SEES-WC-002 SEES Weight Test Cart, 500lbs
SEES-WC-002-RENTAL-D SEES Weight Test Cart, 500lbs Daily Rental
SEES-WC-002-RENTAL-W SEES Weight Test Cart, 500lbs Weekly Rental
SEES-WC-002-RENTAL-M SEES Weight Test Cart, 500lbs Monthly Rental
SEES-WC-002W Weight Cart Wheel, replacements
SEES-WC-002WB SEES-WC-002WB Weight Cart Wheel Bushing, replacements
SEES-WC-003 Weights, 50lb casting
SEES-WC-004 SEES Weight Test Cart, 250lbs

SEES-WC-002

800.526.0026 954.971.1115 / fax 954.917.7337

476
www. SEESinc.com

Tools

TOOLS / LUBRICANTS
S.E.E.S. # Description
MIS-108 Cable Jacket Remover precision shears ease the removal
of plastic, metal and rubber jacket from all round cables.
MIS-108
Smooth positive cutting action.
MIS-108-A Blade Nose Guide, replacement
MIS-108-B Cutter Blades, replacement, 6/Pkg
MIS-109 Inspection Mirror, 1-1/8" diameter magnifying mirror has a
1/4" diameter handle that is set on a 45˚ angle.
MIS-111 Contact Burnishing Tools, 3" x 1/4" x .007" thick. Leaves no
residue, insulated plastic handle, 5/pkg. MIS-108-A
MIS-112 Contact Burnishers, Heavy-Duty 3-1/4" x 1/4" x .010" thick.
Leaves no residue, insulated plastic handle, 5/Pkg.
MIS-050 Flex Rail File, 14" Flat Flex Rail File, 8 teeth per inch
MIS-050B File Handle, Adj. heavy-duty metal plane type 12-14
MIS-113 Spring Adjuster with Offset .018" MIS-108-B
MIS-114 Spring Adjuster with Offset .032"
MIS-115 Adjuster Tool, .40" and .028" slots
MIS-TOOL-003 Step Drill Bits, high speed steel, 10 hole sizes range from MIS-109
minimum 13/16" to maximum 1-3/8". Shank size 7/16"
MIS-TOOL-202 Sill Height Gauge, Imperial Slider Ruler
MIS-TOOL-202M Sill Height Gauge, Metric Slider Ruler
MIS-TOOL-203 Sill Height Gauge, Imperial, S/S Slider
MIS-TOOL-203M Sill Height Gauge, Metric, S/S Slider
WR-SJ-001 Wire Rope Soft Jaws, for use with vice grips (not included) MIS-111
MIS-211D Gauge, Wire Rope Tension
WR-MT Wire Rope Measuring Gauge, for imperial sizes, go/no go
style, use on rope diameters 3/8", 7/16", 1/2", 9/16", 5/8",
11/16" and 3/4". Blue anodized with SEES logo MIS-050
WR-MT-ATIS Wire Rope MeasuringTool, for imperial sizes, Marked with
ATIS logo, Blue
WR-MT-NB  Wire Rope Measuring Tool, blue anodized without logo
WR-MT-METRIC Wire Rope Measuring Tool for Metric Rope, measure rope
diameter, go / no go. Blue anodized.
MIS-050B
SEES-WR-SG Wire Rope Sheave Gauge, (Metal) Sizes: 1/2, 9/16, 5/8, 3/4
SEES-WS-001 SEES Wire Stripper Tool
MIS-TOOL-008 Snap Ring Pliers Set, Internal & External

MIS-TOOL-003
MIS-115
MIS-114

MIS-TOOL-202
SEES-WS-001
WR-SJ-001

MIS-211D

WR-MT WR-MT-NB WR-MT-METRIC

954.971.1115 / fax 954.917.7337 800.526.0026

477
 www. SEESinc.com

Tools S.E.E.S. # O.E.M. # Description

TOOLS / LUBRICANTS

WR-CALIPER Digital Wire Rope Caliper, only

WR-CALIPER-C Wire Rope Caliper, with case, digital, measures inches
WR-CALIPER and milimeters
WR-CALIPER-L Wire Rope Caliper, Digital Digital 6" in/mm, Larger Jaw
G-TOOL-001 DRV-0009N Parameter Tool, for MOVFR II Hand Held with 7FT Cable
G-TOOL-002 DRV-0003N Parameter Tool, FR-PU04-7 Hand Held with 7FT Cable
G-TOOL-003 2500-3051 Parameter Tool, for MOVFE
GPC-201 MOVFR-0072N Drive, 115 VAC for MOVFR II Oper
Includes Drive Ribbon Cable
SEES-CABLE-USB-RJ45 Programming Cable, USB to RJ45
MIS-TOOL-001 Flashlight, 9 LED, extra bright, with SEES logo
MIS-TOOL-004 EMF-1 Flashlight, Extendable LED 6-21" with Magnetic Ti­­­p
MIS-TOOL-005 EMF-2 Flashlight, Extendable Magnetic LED 21" including
WR-CALIPER-C inspection mirror & clip
MIS-TOOL-006 MSL-1 Stick Light, Magnetic LED Water Resistant, with AAA
Battery
MIS-TOOL-007 PAL-1 Area Light, Pocket Size LED Water Resistant, with AAA
Battery
MIS-TOOL-010 Swaging Tool, 24" Hand Swager For Wire Rope Aircraft
Cable
MIS-TOOL-011 PJL-1 Portable Light, 10W COB LED, Cordless, Magnetic
MIS-147B-P 9875412 Car Top Light, magnetic base with flex neck & 25ft cord
with plug
MIS-920  Drop Light, Fluorescent Work Light 120V 25' Cord with
Outlet
MIS-921  Drop Light, Fluorescent Work Light 15W 25' Cord with
WR-CALIPER-L 100V Tool Tap
MIS-922  Drop Light, Fluorescent Work Light 15W 50' Cord with
100V Tool Tap
LTT-1 Service Tool, LG Sigma OPP-2000
LTT-2 Service Tool, LG Sigma OPP-2000
SEES-BRGT-001 BTM-100 Bearing Removal Tool, for 1604 drive arm bearings

G-TOOL-001

MIS-TOOL-001
MIS-TOOL-004

G-TOOL-002

MIS-TOOL-005

MIS-TOOL-006 MIS-TOOL-007

MIS-920

MIS-921 MIS-922

800.526.0026 954.971.1115 / fax 954.917.7337

478
www. SEESinc.com

Relay Testers

TOOLS / LUBRICANTS
Universal Multi-Volt Relay Tester
S.E.E.S. # Description
MIS-301UTK Tester Kit, Universal multi-volt relay tester with lamp test

IBoards included, MIS- fixture and carrying case. Tests 2-12 pole relays including the
301UT1, MIS-301UT2, MIS-
following: P&B R1 relays, KU Series 2 and 3 pole relays,
301UT4, MIS-301UT5, MIS-UT6, Omron MY/LY relays, Haughton 6 pole relays, IBM relaysm

MIS-UT7 and MIS-UT11
Input/Output modules
MIS-301UT Relay Tester, universal, with case, AC/DCV boards sold
separately or in a kit Includes
MIS-301UT1 Relay, P&B R1- series MIS-301UT Case
MIS-301UT2 Relay, KU series 2/3 pole
MIS-301UT3 Board, lamp test
MIS-301UT4 Relay, Omron MY type, 2/4 pole
MIS-301UT5 Relay, Omron LY type, 2 pole
MIS-301UT6 Relay, HRP-4BB/4BA
MIS-301UT7 Relay, IBM 4-12PDT, 45 VDC
MIS-301UT8 Relay, solid state, plug in
MIS-301UT9  Relay Test Board, I/O module for DRP-22 and DRP-22A
MIS-301UT10 Relay Test Board, I/O module for DRP-22H, DRP-22C, DRP-22F
MIS-301UT11 Relay Test Board, I/O module for DRP-22B & DRP-22G
MIS-301UT12 Relay Test Board, LY4N relay tester
MIS-301UT13 Test Board, Motion Control 100 VDC Safety Relay
MIS-301UT14 Test Board, for PR-36, 37 & PR-52 Guardian type relays MIS-301UTF-C
MIS-301UTF
MIS-301UTF Main Fuse, SEES relay tester 500MA
MIS-301UTF-C Coil Fuse, SEES relay tester 250MA
MIS-301UT-IBM IBM Tester kit, MIS-301UT with IBM test card

MIS-301UT-IBM
MIS-301UT1 MIS-301UT2 MIS-301UT3 MIS-301UT4 MIS-301UT5 MIS-301UT6

MIS-301UT7 MIS-301UT8 MIS-301UT10 MIS-301UT11 MIS-301UT12 MIS-301UT13

Specialty Test Equipment

S.E.E.S. # O.E.M. # Description
MIS-300T  Relay tester. Hall effect, non contact LED relay tester.
Ideal for “ice cube” relays. Works with all voltages and currents.
MIS-301T Universal Relay Tester. For IBM style relays. MIS-300T
MIS-310 EEPROM Memory Copier
MIS-311 EEPROM Eraser with Timer MIS-301T
MIS-312 A835RPLBOX PCB, EDR assembly with box

954.971.1115 / fax 954.917.7337 800.526.0026

479
 www. SEESinc.com

Tools
Relay Adjuster's Tool Kit
TOOLS / LUBRICANTS

Specially designed tools are a must for the technician or adjuster. The perfect assortment to quickly and
efficiently check, adjust and trouble-shoot all types of relays, held in a strong vinyl case with pockets.
S.E.E.S. # Description
Relay Service Tool Kit, Vinyl case contains: Thickness gauges, a spring tension gauge,
MIS-116 
contact burnishers, spring and armature adjusters, flat nose pliers, phillips screw driver,
offset screwdrivers, inspection mirror, wrenches and a screw holding screwdriver.

MIS-116
Stud Welding Gun
S.E.E.S. # Description
MIS-SWG-1 Stud Welding Gun, Gap gun G-1 with 10' cable
MIS-SWG-2 Stud Welding Gun, Contact gun C-1 with 10' cable
MIS-SWG-3 Stud Welding Gun, S-1 gun extended pistol with 15' cable
MIS-SWG-TIP-8 Stud Welding Tip, #8 Stud
MIS-SWK-1 Stud Welder Kit, Quickshot 1/4 capacity, specify gun
MIS-SWG-2 MIS-SWK-2 Stud Welder Kit, Modular 5/16" capacity, specify gun
MIS-SWK-3 Stud Welder Kit, Titan 3/8" capacity, specify gun
MIS-SWST-0610 Stud Welder Kit, Titan 3/8" capacity, specify gun
MIS-SWST-0650 Welding Stud, 6-32 x 0.50", Pack of 100
MIS-SWST-0810 Stud Welder Kit, Titan 3/8" capacity, specify gun
MIS-SWST-0850 Welding Stud, 8-32 x 0.50", Pack of 100
MIS-SWK-1
MIS-SWST-08075 Welding Stud, 8-32 x 0.75", Pack of 100
MIS-SWST-1010 Stud Welder Kit, Titan 3/8" capacity, specify gun

Commutator Treating Kit and Stone

This versatile tool is a must. Each kit contains an assortment of specialized stones
and a flexible handle. Completely non-conductive for safe use.
S.E.E.S. # Description
MIS-135 Commutator Treating Kit and brush seater contains a holder, and two
each coarse, medium, finish, and extra finish stones, and four brush
seater and seating stones. MIS-135
MIS-136 Handle Only, for seating stones
MIS-137 Replacement Stone, Grade: Coarse, Red
MIS-138 Replacement Stone, Grade: Medium, Yellow
MIS-139 Replacement Stone, Grade: Finish, Green
MIS-140 Replacement Stone, Grade: Extra Finish, Black
MIS-141 Replacement Stone, Grade: FH Seater, White
MIS-186A Brush Seater and Commutator Cleaning Stones. This popular Medium-
Soft Grade stone, 1" x 1" x 4-3/4" long, is perfect for general purpose
use. Additional sizes and grades also available each sold separately
MIS-186A
Commutator Eraser, 1" x 1" x 5" Rubrite flexible abrasive cleaning tool
MIS-186F 
for commutator conditioning. Required for proper maintenance of
generators and DC motors.

Brush Seater
S.E.E.S. # Description L W H Grade
MBS-001 Brush Seater, cleaning stones (pack of 1) 4-3/4" 2" 1-1/4" MS
MBS-002 Brush Seater, cleaning stones (pack of 1) 4-3/4" 1" 1/2" MS
MBS-003 Brush Seater, cleaning stones (pack of 1) 4-3/4" 3/4" 1/2" MS
MBS-004 Brush Seater, cleaning stones (pack of 2) 4-3/4" 3/4" 1/4" FH
MBS-005 Brush Seater, cleaning stones (pack of 4) 4-3/4" 1/2" 1/4" FH
MBS-006 Brush Seater, cleaning stones (pack of 4) 4-3/4" 3/8" 1/4" FH MBS SERIES

800.526.0026 954.971.1115 / fax 954.917.7337

480
www. SEESinc.com

Tools

TOOLS / LUBRICANTS
Burnishing Tools
Designed to burnish and polish all types of contacts -- without removing virtually any
precious metal. And they leave no grit.

S.E.E.S. # Description L W T Pack

MBT-001 Burnishing Tool, Contact, plastic handle 4" 3/16" .007" 12
MBT-002 Burnishing Tool, Contact, plastic handle 4" 3/16" .007" 10 MBT SERIES
MBT-003 Burnishing Tool, Contact, plastic handle 3-1/2" 1/4" .011" 10

Commutator Dressing and Finishing Stones

Commstone, Lathe-Type
S.E.E.S. # Description L W H Grade
MCS-001 Commstone, Lathe-type w/ 1-1/2 wood block 5" 1" 1-1/2" EP
MCS-002 Commstone, Lathe-type w/ 1-1/2 wood block 5" 1" 1-1/2" F
MCS-003 Commstone, Lathe-type w/ 1-1/2 wood block 5" 1" 1-1/2" M
MCS SERIES
MCS-004 Commstone, Lathe-type w/ 1-1/2 wood block 5" 1" 1-1/2" P
MCS-005 Commstone, Lathe-type w/ 3 wood block 8" 1" 2" F
MCS-006 Commstone, Lathe-type w/ 3 wood block 8" 1" 2" M
MCS-007 Commstone, Lathe-type w/ 3 wood block 8" 1" 2" P
MCS-008 Commstone, Lathe-type w/ 3 wood block 8" 1" 2" EP MCS-015
MCS-009 Commstone, Lathe-type no wood block 8" 1" 2" EP
MCS-010 Commstone, Lathe-type w/ 1-1/2 wood block 8" 1" 1-1/2" F
MCS-011 Commstone, Lathe-type w/ 1-1/2 wood block 8" 1" 1-1/2" M
MCS-012 Commstone, Lathe-type w/ 1-1/2 wood block 8" 1" 1-1/2" P
MCS-013 Commstone, Lathe-type w/ 1-1/2 wood block 8" 1" 1-1/2" EP
MCS-014 Commstone, Lathe-type w/ 3 wood block 8" 1-1/2" 2-1/2" EP
MCS-015 Commstone, Lathe-type w/ 3 wood block 8" 1-1/2" 2-1/2" F
MCS-016 Commstone, Lathe-type w/ 3 wood block 8" 1-1/2" 2-1/2" M
MCS-017 Commstone, Lathe-type w/ 3 wood block 8" 1-1/2" 2-1/2" P

Commstone, Pencil-Type MCSP SERIES

S.E.E.S. # Description L W H Grade Grade Guide

MCSP-001 Commstone, Pencil-type 6" 3/8" 1/4" F
GRADE M (Medium - 90 Grit) for use
MCSP-002 Commstone, Pencil-type 6" 3/8" 1/4" M
where only high mica or a small
MCSP-003 Commstone, Pencil-type 6" 3/8" 1/4" P
amount of copper is to be removed.
MCSP-004 Commstone, Pencil-type 6" 3/8" 1/4" EP
MCSP-005 Commstone, Pencil-type 6" 1/2" 1/4" M GRADE F (Fine - 120 Grit) recommended
MCSP-006 Commstone, Pencil-type 6" 1/2" 1/4" P for general finishing, for periodic
MCSP-007 Commstone, Pencil-type 6" 3/8" 3/8" F preventative maintenance or removing
MCSP-008 Commstone, Pencil-type 6" 3/8" 3/8" M small ridges.
MCSP-009 Commstone, Pencil-type 6" 3/8" 3/8" P
MCSP-010 Commstone, Pencil-type 6" 3/8" 3/8" EP GRADE P (Extra Fine or Polishing -
MCSP-011 Commstone, Pencil-type 6" 1/2" 3/8" F 220 Grit) for finishing or polishing /
MCSP-012 Commstone, Pencil-type 6" 1/2" 3/8 M burnishing where a high mirror-like
MCSP-013 Commstone, Pencil-type 6" 1/2" 3/8" P polish is desired.
MCSP-014 Commstone, Pencil-type 6" 5/8" 1/2" F
MCSP-015 Commstone, Pencil-type 6" 5/8" 1/2" M GRADE EP (Extra Polish - 320 Grit) for
MCSP-016 Commstone, Pencil-type 6" 5/8" 1/2" P finishing small commutators.
MCSP-017 Commstone, Pencil-type 6" 3/4" 3/4" EP
MCSP-018 Commstone, Pencil-type 6" 3/4" 3/4" M
MCSP-019 Commstone, Pencil-type 6" 3/4" 3/4" F
MCSP-020 Commstone, Pencil-type 6" 3/4" 3/4" P MCSP-002
MCSP-021 Commstone, pocket combination 8" 2" 1" M/P

954.971.1115 / fax 954.917.7337 800.526.0026

481
 www. SEESinc.com

Tools
Flexible Files
TOOLS / LUBRICANTS

Plastone flexible files are made of hard abrasive materials pressed into a flexible core to
enable you to bend or twist these tools any way you like to reach curved surfaces and
otherwise hard-to-reach areas. They are non-conductive and impervious to oil and water.
S.E.E.S. # Description L W H Grade
MFFP-001 Flexible File, Plastone 12/pack 1/4" 4-1/2" .015" 240
MFFP-002 Flexible File, Plastone 12/pack 3/8" 4-1/2" .015" 240
MFFP-003 Flexible File, Plastone 12/pack 1/4" 4-1/2" .015" 320
MFFP-004 Flexible File, Plastone 12/pack 3/8" 4-3/4" .015" 320
MFFP-005 Flexible File, Plastone 12/pack 3/8" 4-3/4" .025" 120
MFFP-006 Flexible File, Plastone 12/pack 1/4" 4-1/2" .020" 240
MFFP SERIES MFFP-007 Flexible File, Plastone 12/pack 3/8" 4-1/2" .020" 240
MFFP-008 Flexible File, Plastone 12/pack 1/4" 4-1/2" .020" 320
MFFP-010 Flexible File, Plastone 12/pack 3/8" 4-1/2" .040" 180
MFFP-011 Flexible File, Plastone 12/pack 1/4" 4-1/2" .040" 240
MFFP-012 Flexible File, Plastone 12/pack 3/8" 4-1/2" .040" 240
MFFP-013 Flexible File, Plastone 12/pack 1/4" 4-1/2" .040" 320
MFFP-014 Flexible File, Plastone 12/pack 3/8" 4-1/2" .040" 320
MIS-186 Flexible File, Plastone 12/pack 3/8" 4-3/4" .040" 80
MIS-185 Flexible File, Plastone 12/pack 1/2" 4-3/4" .020" 180
MIS-185A Flexible File, Plastone 12/pack 1/2" 4-3/4" .040" 80
MIS-186B Flexible File, Plastone 12/pack 1/2" 4-3/4" .040" 120
MFFP-019 Flexible File, Plastone 12/pack 1/2" 4-3/4" .040" 180
MFFP-020 Flexible File, Plastone 12/pack 1/2" 4-3/4" .040" 240
MFFP-021 Flexible File, Plastone 12/pack 7/8" 4-3/4" .040" 120
MFFP-022 Flexible File, Plastone 12/pack 7/8" 4-3/4" .040" 240
MFFP-023 Flexible File, Plastone 12/pack 7/8" 4-3/4" .040" 320
MIS-186C Flexible File, Plastone 12/pack 7/8" 4-3/4" .070" 80
MIS-186D Flexible File, Plastone 12/pack 1/2" 4-3/4" .070" 80
Grade Guide MIS-186E Flexible File, Plastone 12/pack 1/2" 4-3/4" .070" 120
MFFP-026 Flexible File, Plastone 12/pack 1/2" 4-3/4" .070" 120
80 Coarse MFFP-027 Flexible File, Plastone 12/pack 1/2" 4-3/4" .070" 240
MFFP-028 Flexible File, Plastone 12/pack 1/2" 4-3/4" .070" 320
120 Medium MFFP-029 Flexible File, Plastone 12/pack 3/8" 4-3/4" .070" 120
MFFP-030 Flexible File, Plastone 12/pack 3/8" 4-3/4" .070" 180
180 Fine
MFFP-031 Flexible File, Plastone 12/pack 3/8" 4-3/4" .070" 320
240 Extra Fine MFFP-032 Flexible File, Plastone 12/pack 7/8" 4-3/4" .070" 80
MFFP-033 Flexible File, Plastone 12/pack 7/8" 4-3/4" .070" 180
320 Polish MFFP-034 Flexible File, Plastone 12/pack 7/8" 4-3/4" .070" 120
MFFP-035 Flexible File, Plastone 12/pack 1/8" 4-1/2" .020" 240
MFFP-036 Flexible File, Plastone 12/pack 1/8" 4-1/2" .020" 320
MFFP-037 Flexible File, Plastone 12/pack 1/8" 4-1/2" .020" 180

Flexible Abrasives
Used for hundreds of jobs - including metal cleaning, commutator burnishing and rust
removal.
S.E.E.S. # Description L W H
MRR-001 Rubrite, unmounted 5" 3/8" 3/8"
MRR-002 Rubrite, unmounted 5" 5/8" 3/8"
MRR-003 Rubrite, unmounted 5" 1/2" 1/2"
MRR SERIES MRR-004 Rubrite, unmounted 5" 1/2" 1"
MRR-005 Rubrite, unmounted 5" 1" 5/8"
MRR-006 Rubrite, unmounted 5" 3/4" 3/4"
MRR-008 Rubrite, unmounted 5" 2" 1"
MRR-009 Rubrite, unmounted 5" 3" 1"
MRR-010 Rubrite, unmounted 5" 1" 1/8"

800.526.0026 954.971.1115 / fax 954.917.7337

482
www. SEESinc.com

Tools

TOOLS / LUBRICANTS
Diamond Spatulas
S.E.E.S. # Description
MDS-001 Diamond Spatula, Green, coarse grit
MDS-002 Diamond Spatula, Red, medium grit
MDS-003 Diamond Spatula, Blue, fine grit
MDS-KIT Diamond Spatula, Kit, 1 of each (Green, Red, Blue)
MDS-KIT-001 Diamond Spatula, Kit 1 of each (Yellow, Red, Blue)

Identification Stencils MDS-KIT MDS-KIT-001

S.E.E.S. # Description
Q-CARDS Cards Elevator Set, Magnetic Stencils for Hoistway
and Equipment Identification

Tools
S.E.E.S. # Description
Q-CARDS
MBTS-001 Brush Tension Scale, 15 pounds
MIS-TOOL-008 Snap Ring Pliers Set, Internal & External
MU-001 Undercutter, Mica-Miller, 115V with standard head
WR-QBTM-2 Quick-Balance Tension Meter

Tool Box MU-001

S.E.E.S. # Description MBTS-001
MIS-TOOL-BOX Portable Tool Chest, Red, 20-1/2" Width x
9-5/8" Height x 8-5/8" Deep, 3 Storage drawers

SEES Tool Bag

S.E.E.S. # Description
SEES-TOOL-TOTE Tool Tote, with Soft Sides Heavy Duty,
12.5" L x 7.5" W x 5.5"

SEES-TOOL-BOX SEES-TOOL-TOTE

Trash Bags, Brooms and Absorbent

S.E.E.S. # Description
MIS-TRASH-BAGS 30 gal. Black Trash Bags, Heavy Duty
Coreless Roll of 70
MIS-PUSH-BROOM Push Broom, 24" Sweep Face
MIS-DUST-PAN Dust Pan, Metal, 17"
MIS-ANGLE-BROOM Angle Broom, 13" Sweep Face
MIS-ABSORBENT-001 Absorbent, Loose, 40 lb. Bag MIS-WET-DRY-VAC
MIS-WET-DRY-VAC Wet Dry Vac, 5 Gallon Bucket Head

954.971.1115 / fax 954.917.7337 800.526.0026

483
www. SEESinc.com

Tools

TOOLS / LUBRICANTS
Screwdrivers and Fasteners
S.E.E.S. # Description
MIS-126A
MIS-126A Screwdriver, Screwdriver with Ratchet and 12 Bits,
Phillips #0, #1, #2, Slotted #4, Spanner #6 x #8, #10 x #12,
Torx(R) T10 x T15, T20 x T25
MIS-126B #6 Spanner Bit
MIS-126C #8 Spanner Bit MIS-126F
MIS-126D #10 Spanner Bit
MIS-126E Phillips Bit
MIS-126F Torx Bit, star point
MIS-126G Screwdriver, 16-in-1, without Ratchet A590A MIS-126G
MIS-126H Screwdriver, 15-in-1, Elevator Service and Repair
MIS-128 Tamper Proof Screw, 10/32 x 1", Nickel plated MIS-128
MIS-129 Tamper Proof Screw, 10/32 x 2", Oval Head, stainless steel MIS-129
MIS-131 Tamper Proof Screw, 8/32 x 1", Nickel plated
MIS-133 Tamper Proof Screw, 6/32 x 1", Nickel plated
MIS-128A Tinnerman Clip for 10-32 thread MIS-131
MIS-130MR Tamper Proof Screw, M4x25mm, Round Hex Pack of 100 MIS-133
MIS-131A Tinnerman Clip for 8-32 thread
MIS-132 Screw, Tamper Proof, 8-32 x 1-1/2
MIS-133A Tinnerman Clip for 6-32 thread
MIS-134 Tinnerman Clip for 1/4 x 20 thread MIS-131A
MIS-134A Cage Nut, .093 thru 126 thk used in Adams & Epco fixtures
for 10-32 thread
MIS-159 Security Seal, lead seal with 10" monel wire to secure governor
speed settings as required by inspectors for code compliance. MIS-133A MIS-134A
OB-100  Tool, manual driver for security fasteners used on
Otis LRV car panels
OB-100A Security Screw, LRV Car Panel screw used with OB-100
OB-101 Tool, Hall panel driver #6 A OB-100A
MIS-130M Screw, Tamperproof M4x25mm, Pan, Pack of 100, M4.7 MIS-134

*photos enlarged to show detail

Solder Pot & Babbit OB-100

S.E.E.S. # Description
MIS-TOOL-100 Solder Pot, 20lbs, 115 VAC 5" I.D. x 9" D, Adj temp 200-800F
MIS-TOOL-101 Ladle, 2.5" Bowl x 9.5" Long for solder pot
MIS-159
MIS-TOOL-103 Babbit, Lead Free pucks (Rohos)

MIS-100A

MIS-TOOL-101 MIS-TOOL-103

Lubricants
S.E.E.S. # Description
MIS-TOOL-100
MIS-100A  Cable Lubricant, 1 gallon. Keeps cables running smoother, more efficiently
MIS-100B  Bearing Oil, 1 gallon. Lubricates sleeve type bearings on motor generators
MIS-100C  Detector Face Plate Cleanser, 1/2 quart. Non-residual anti-static cleanser
MIS-100D  Hydraulic Oil, 1 gallon. Specially formulated for all types of hydraulic
elevator pistons MIS-100D55
MIS-100D5 Hydraulic Oil, AW32 5 gallon pail
MIS-100D55 Hydraulic Oil, AW32 55 gallon drum
MIS-100D55-BIO Hydraulic Oil, Bio, 55 gallon drum
MIS-100P
MIS-100P Grease, Gear & Chain “Sling Free”, 10.5oz tube MIS-100D5

954.971.1115 / fax 954.917.7337 800.526.0026

485
 www. SEESinc.com

Cleaners, Lubricants and Sealants

TOOLS / LUBRICANTS

Lubricants
S.E.E.S. # Description
MIS-100E Worm Gear Oil, 1 gallon. Lubricates worm gears
MIS-100E5 Worm Gear Oil, #7, 5 Gal Pail, 71011EP, 140Wt
MIS-100F  Way Oil, for Drive Chain, 1 gallon. Excellent grade to lubricate
MIS-100K chain bushings and pins
MIS-100G Grease, Multi-Purpose, 14 oz. General purpose lubricant
MIS-100E5 MIS-100H  Buffer Oil #6, 1 gallon. Anti-wear hydraulic oil formulated for
door checks and oil buffers
MIS-100K  Stepper Lube Kit, assorted lubricants, specially formulated
for maintaining stepping switch wear points. Prolongs life,
improves performance
MIS-100L Rail Lube, 1 gallon. Paraffin based lubricant designed for
automatic rail lubricators
MIS-100M  Lubriplate, general purpose lock and linkage grease, 3/8 oz. tube
MIS-100Q Rail Lube, 1 quart
MIS-100Q
MIS-100R Cable Lube, 1 quart
MIS-100S Slipit Silcone-Free Liqui-Form (Case, 15 Quart Bottles)
MIS-100M
MIS-SPOUT-OILER Percision Spout Oiler, with All-Purpose Oil
MIS-100S

Cleaners
S.E.E.S. # Description
MIS-SIMPLE-GREEN Simple Green, All-Purpose Indutrial Cleaner / Degreaser,
1 Gallon
MIS-CLEAN-WIPES Heavy Duty Cleaning Wipes
MIS-CLEAN-WIPES-001 Heavy Duty Cleaning Wipes for Stainless Steel

MIS-CLEAN-WIPES MIS-CLEAN-WIPES-001
O-Ring Kit
S.E.E.S. # Description
MIS-171-KIT O-Ring Assortment Kit, Buna Size 006 Thru 334

Rope Oilers
Automatic Rope Oiler keeps ropes lubricated to increase the lifetime of rope up to
400%, and prevent rope grooves from wearing in the sheave.

MIS-171-KIT S.E.E.S. # Description

MIS-100 Rope Oiler with 9" wick
MIS-102 Rope Oiler with 12" Wick
MIS-100A Cable Lubricant, used with MIS-100 & MIS-102
MIS-103 Extension Bracket for rope oiler
MIS-103A Replacement Wick for all size oilers
MIS-103B Replacement Wick, 1/2" x 6-1/2" x 12"
MIS-104 Wire Rope Cleaning Kit
MIS-100 MIS-104A Replacement Brush, For MIS-104 Wire Rope Cleaning Assy
MIS-104B Wire Rope Cleaning Solution, For MIS-104, 1 Gallon

Rail Lubricator
S.E.E.S. # Description
MIS-101B Rail Lubricator for 8 & 15 lb. Rails
MIS-101B
MIS-101C Oiler Wick, braided cotton, 1" x 7.5"
MIS-100L Rail Lube, 1 gallon. Paraffin based lubricant designed for
MIS-104A automatic rail lubricators, for use with MIS-101B Rail Lubricator

800.526.0026 954.971.1115 / fax 954.917.7337

486
www. SEESinc.com

Cleaners, Lubricants and Sealants

TOOLS / LUBRICANTS
X-Pando
The problem solver for over 60 years!
Special expanding cements for use with pipe couplings, ceramic and glass
• X-Pando Pipe Joint Compound - for threaded or flanged joints made of
iron, steel, brass, copper, stainless steel or PVC.
• X-Pando Special No. 2 - pipe joint compound for cement lined pipes to MIS-XPANDO-001
be welded.

S.E.E.S. # Description
MIS-XPANDO-001 Pipe Joint, Compound 14oz Can
MIS-XPANDO-002 Pipe Joint, Compound 70oz Can
MIS-XPANDO-003 Pipe Joint, Compound 25 lb drum
MIS-XPANDO-004 Pipe Joint, Compound 50 lb drum
MIS-XPANDO-005 Pipe Joint, Compound 100 lb drum
MIS-XPANDO-006 Pipe Joint, Compound Spec #2 14oz Can
MIS-XPANDO-007 Pipe Joint, Compound Spec #2 70oz Can
MIS-XPANDO-003

Polycel 100
This remarkable urethane sealant foam expands when activated by moisture
in the air. The unique chemical properties dry in less than one hour, eliminates
chain, counterweight, and pipe rattle problems. Muffles noise and seals and fills
gaps wherever needed.
S.E.E.S. # O.E.M. # Description
MIS-215 Polycel 100, 12 oz. can, urethane sealant

S.E.E.S. # O.E.M. # Description

MIS-CHEM-002 53300LO Thermal Compound, 3CC syringe
MIS-CHEM-002

MIS-215

CRC® Chemicals Products

S.E.E.S. # Description
CRC-6 Lectra-Clean® 20 oz. spray can, specially formulated solvent for the cleaning & degreasing of dirty,
corroded electrical equipment. It quickly removes grease, oil, wax, dirt, moisture and other foreign
substances. Non-Conducting, non-corrosive, evaporates fast, leaves no residue. Ideal for heavy
duty cleaning/degreasing applications.
Lectra-Clean® 5 gallon pail, the same famous formula in an economical industrial size.
CRC-6A 
Cable-Clean® 20 oz. spray can, formulated to effectively remove contamination from semi-
CRC-11  CRC-6
conducting jackets and insulations of high voltage cables before splicing and terminations. It may CRC-11
be used on a variety of elastometric and thermo plastic insulations and jackets. No flash or fire
point, non-conductive, and non-corrosive to metals.
Hydro Force Cleaner Degreaser® 18 oz. spray can, quickly penetrates and removes grease and
CRC-16 
grime from washable surfaces. Safe for use on most metals, plastics, rubber compounds and
fabrics. Perfect for use in the machine room, pit or for clean-ups anywhere. Keep plenty on hand.

Scientifically formulated to protect, preserve and improve performance of

valuable equipment. Environmentally safe, no CFC's. CRC-16

954.971.1115 / fax 954.917.7337 800.526.0026

487
 www. SEESinc.com

SEES Solutions
TOOLS / LUBRICANTS

Formulated exclusively for the elevator professional.

SSEE-001 SSEE-002 SSEE-003 SSEE-004 SSEE-005 SSEE-006

SSEE-007 SSEE-008 SSEE-009 SSEE-011 SSEE-012 SSEE-013

S.E.E.S. # O.E.M. # Product Description

SSEE-001 APA100CC Water & Temperature Resistant Grease. Heat Stable. Deep Penetrating. NET WT. 11 OZ. (311 Grams)
SSEE-002 APA140CC Dry Silicone Spray. Fast, Safe on Plastic. Reduces Friction. Non-Staining. NET WT. 11 OZ. (311 Grams)
SSEE-003 APA130CC Electronic Contact Cleaner, Non-Flammable, Dries Fast. Zero Residue. Non-Corrosive. 30,000 Volt
Dielectric Strength. Safe on most plastics. NET WT. 10 OZ. (283 Grams)
SSEE-004 High Purity Contact Cleaner, Quick Drying Formula. Electrical grade. Leaves no residue.
Plastic Safe. NET WT. 11 OZ. (311 Grams)
SSEE-005 APA180CC Chain & Cable Lubricant. Prevents Corrosion. High Pressure & Extreme Temperature Resistance.
NET WT. 15 OZ. (425 Grams)
SSEE-006 APA31GC Metal Parts Protector (Guide Rail Protector) Long Term. Flexible Dust Retardant Coating. Easily
Applied & Removed. NET WT. 14 OZ. (396 Grams)
SSEE-007 APA150CC Heavy Duty Penetrating Oil. Super Penetrating Nut Loosener with Capillary Wet Drilling Action.
Stops Squeaks Fast. Frees Rusted & Corroded Parts. NET WT. 15 OZ. (425 Grams)
SSEE-008 APA160CC All Purpose Mechanics Spray. Non-Flammable. Penetrates, Lubricates, Cleans, Never Dries,
Displaces Water 39,000 Volt Dielectric Strength. NET WT. 12 OZ. (340 Grams)
SSEE-009 Metal Cleaner & Polisher. Effective on all Metal Surfaces. Cleans, Polishes, Beautifies.
Non-flammable, Odorless. NET WT. 18 OZ. (1 LB. 2 OZ.) (510 Grams)
SSEE-011 High Tack Belt Dressing. Stops Slippage. Increases Equipment Efficiency. Sprays when Held Upright
or Inverted. NET WT. 12 OZ. (340 Grams)
SSEE-012 Air Duster, 8 oz
SSEE-013 Germicidal Cleaner, Case of 12, 20oz
SSEE-013-STORE Germicidal Cleaner, Sold as Each
SSEE-014 Disinfectant Spray Q, Country Fresh Case of 12, 20oz
SSEE-014-STORE Disinfectant Spray Q, Sold as Each, 20oz
Packaged 6 per carton unless otherwise specified

800.526.0026 954.971.1115 / fax 954.917.7337

488
www. SEESinc.com

The SEES Library Technical reference to aid the elevator professional

TOOLS / LUBRICANTS
Elevator Books
S.E.E.S. # Description
BOOK-001A 2020 Field Safety Handbook, up to date resources for safety information that the elevator industry field
employees shall use to help prevent injuries and illnesses resulting from unsafe acts and/or conditions.
BOOK-002 Elevator Maintenance Manual, An in-depth guide, designed for the service technician, covering elevator
maintenance programs and practices as related to electric and hydraulic elevators. Also covers,
escalators and moving walks.
BOOK-003 Elevator Field Maintenance Handbook, Pocket sized companion designed for the service mechanic to
take into the field. Contains over 75 charts and guides.
BOOK-004 Facility Manager’s Operation and Maintenance Handbook, will help give the facility manager guidance
in maintaining continuity in all services, running a professionally managed property and achieving each
of these.
BOOK-005 Elevator & Escalator Maintenance for Building Managers, 2nd Edition In-depth guide designed for the
service technician, covering elevator maintenance programs and practices as related to both electric
and hydraulic elevators. Also covers escalators and moving walks. Can be used for “how-to” guide that
can be used for training classes, home study or as a reference guide.
BOOK-007 Field Employees’ Elevator Testing Manual, for various tests on electric and hydraulic passenger and
freight elevators in the presence of a Certified Elevator Inspector. Can help with understanding of what
is being tested, why it is being tested and a safe means to demonstrate the function
BOOK-008 Electrical Engineering Handbook, contains tables, charts and motor data carefully selected for everyday use.
BOOK-009 2009 International Building Code, comprehensive building code establishes minimum regulations for
building systems using prescriptive and performance-related provisions. This edition is fully compatible
with all International Codes (I Codes) published by the International Code Council
BOOK-010 Electric Elevator & Escalator Maintenance Logbook, designed to comply with ASME A17.1 Safety Code
BOOK-011 Hydraulic Elevator & Escalator Maintenance Logbook, designed to comply with ASME A17.1 Safety Code
BOOK-012 FEM Terminology, provides exact names for each part of the elevator (lift) in eight languages. English,
German, French, Spanish, Italian, Dutch, Danish and Portuguese.
BOOK-014 Maintenance on New Equipment Designs, Is maintenance different on new equipment? What documentation
is required by code? What is a maintenance control program? Find the answers to these questions and more
in this valuable reference.
BOOK-016 Safety Meetings, 7th Edition
BOOK-017 Elevator Industry Inspection Handbook - 7th Edition
BOOK-018 Safety Meetings - 8th Edition

BOOK-001A BOOK-002 BOOK-003 BOOK-004 BOOK-005 BOOK-007 BOOK-008

BOOK-009 BOOK-010 BOOK-011 BOOK-012 BOOK-014 BOOK-016

954.971.1115 / fax 954.917.7337 800.526.0026

489