EH - EF 80 C / P / K

INCREMENTAL ENCODER
MOTOR SERIES
MAIN FEATURES

ø 80 encoder series recommended in feedback control systems on

AC servomotors. They include a traditional incremental encoder and
the Hall effect phases.

· Small dimensions
· Wide resolution range available
· High temperature resistant

HOLLOW SHAFT INCREMENTAL ENCODERS

· Easy mounting

EH series
Basic version with incremental outputs.
Several output types available.

EF series
Optic generation of “Hall effect phases” added to the basic version.
Signal transmission by parallel bus.

ORDERING CODE
EF 80 P 6 L 2000 Z 5 L 8 X 3 PR . XXX
SERIES VARIANT
incremental encoder EH XXX custom version
incremental encoder EF OUTPUT TYPE
with Hall phases PR radial cable output
SIZE (standard length 0.3 m)
mm 80 MAX ROTATION SPEED
TYPE 3 3000 rpm
blind hollow shaft C ENCLOSURE RATING
through hollow shaft P X IP 54
blind hollow shaft with rear fixing K
BORE DIAMETER
POLES OF THE MOTOR (EF SERIES) 8 ø 8 mm
4 poles 4 10 ø 10 mm
6 poles 6 14 ø 14 mm
8 poles 8 15 ø 15 mm
OUTPUT TYPE FOR HALL PHASES (EF SERIES) OUTPUT TYPE FOR INCREMENTAL SIGNALS
NPN open collector C N NPN (EH series)
line driver L C NPN open collector (EH series)
RESOLUTION P push pull (EH series)
ppr from 200 to 2048 PC protected push-pull (AEIC-7272)
N.B.: please directly contact our offices for pulses availability L line driver
EH - EF 80 C / P / K

ZERO PULSE POWER SUPPLY

without zero pulse S 5 5 V DC (available only with L electronic output)
with zero pulse Z 5/28 5 ... 28 V DC (EH series)
8/24 8 ... 24 V DC (available only with L / PC electronic output EH series)

www.eltra.it - [email protected]
63
140616 © Copyright 2014 Eltra S.p.a. Unipersonale. All rights reserved. All informations in this catalog are subject to change without notice.
Eltra takes no responsibility for typographic errors. For the terms of sales please check the website www.eltra.it.
 EH - EF 80 C / K EH - EF 80 P
7 27 7 27 ø 80
32
ø 4 h7

ø 4 h7
180° 180°

53
48.5
43.5
only
K model

25
HOLLOW SHAFT INCREMENTAL ENCODERS

20
M5

ø 8 G7/10 G6/14/15 H7 (C-K model)

ø 8/10/14/15 H7 (P model)
MOTOR

MOTOR

2x M4 2x M4

17,5 max (C model) 25

17,5 K model 34,5

HOW TO MOUNT IT

· Fix the anti-rotation pin (P).

· Insert the encoder on the motor shaft with misalignment recovery system
corresponding to the pin (P).
· Screw the nut (D) (don’t tighten it if you need to phase zero signal).
· Couple the encoder shaft with the motor shaft, making sure the pin (P) is
inserted in the hole of the misalignment recovery system (R).
· Fix the encoder shaft with the two M4 grub screws.
· For zero phasing turn the encoder (22° max.), then screw the nut (D).

Accessories
Anti-rotation pin D.4h7 L=5mm ESA7 (EH-EF80)
ordering code: 23240008

H
 

EH - EF 80 C / P / K

64
140616
 Electrical specifications Mechanical specifications
Resolution from 200 to 2048 ppr Bore diameter ø 8 / 10 / 14 / 15 mm
5 V DC ± 10% Enclosure rating IP 54 (IEC 60529)
Power supply 58 ... 28 V DC ± 5% (only EH series)
... 24 V DC ± 5% (reverse polarity protection Max rotation speed 3000 rpm
only EH series) Shock 50 G, 11 ms
Current consumption 100 mA max (EH series) Vibration 5 G, 10 ... 500 Hz
without load 200 mA max (EF series)
Body material PA66 glass fiber reinforced
Max load current 15 mA for channel
Shaft material 1.4305 / AISI 303 stainless steel
NPN

HOLLOW SHAFT INCREMENTAL ENCODERS

Output type NPN open collector Housing material PA66 glass fiber reinforced
(EH series) push-pull Bearings n° 2 ball bearings
line driver
Bearings life 109 revolutions
Output type for
incremental signals line driver Operating -10° ... +85°C
(EF series) temperature -10° ... +100°C on demand
Output type for Hall NPN open collector / line driver Storage
phases (serie EF) temperature -25° ... +85°C
Max output 105 kHz Weight 250 g
frequency
Counting direction A leads B clockwise (shaft view)
Electromagnetic IEC 61000-6-2
Resolutions EH - EF 80
compatibility IEC 61000-6-4 200 6 poles
250 6 poles
500 4 / 6 / 8 poles
512 6 poles
1000 4 / 6 poles
1024 4 / 6 / 8 poles
2000 6 poles
2048 6 poles

Connections
EH EH
Function Push pull / Npn / Line driver EF
Npn open collector
+V DC red red red
0V black black black
Ch. A green green green
Ch. B yellow yellow yellow
Ch. Z blue blue blue
Ch. A- / brown brown
Ch. B- / orange orange
Ch. Z- / white white
Ch. U / / gray
Ch. V / / violet
Ch. W / / gray-pink
Ch. U- / / red-blue
Ch. V- / / white-green
EH - EF 80 C / P / K

Ch. W- / / brown-green
shield shield shield

www.eltra.it - [email protected]
65
140616 © Copyright 2014 Eltra S.p.a. Unipersonale. All rights reserved. All informations in this catalog are subject to change without notice.
Eltra takes no responsibility for typographic errors. For the terms of sales please check the website www.eltra.it.