ASPIRE GROUP OF COLLEGES

HAVELI LAKHA CAMPUS

Name: _______________________ Chapter # 5 (T-4) Date:
Roll No: ______________________ FateTest # 04 Total Marks: 45
Subject: Computer Section: ICS Total Time: 90 min

Q No.1: Tick the multiple choice with the correct option. (13×1=13)
1. The cells in main memory are logically organized as groups
(a) 8bit (b) 4bits (c) 1Byt (d) Both A&C
2. speeds up the working of CPU
(a) Register (b) RAM (c) Cache (d) All
3 The address bus is
(a) Bidirectional (b) Multidirectional (c) Unidirectional (d) Circular
4. The extension of an executable file is
(a) Xls (b) doc (c) ext (d) exe
5. A set of electrical paths used to transfer data is called:
(a) Printer (b) Keyboard (c) Monitor (d) Bus
6. Data travels over a serial port at kilobits per second
(a) 100 (b) 120 (c) 115 (d) 110
7. The speed of parallel ports is ______________
(a) 16 Mbps (b) 12 Mbps (c) 12 MBps (d) 16 MBps
8. Which is the symbolic language
(a) assembly language (b) Machine language (c) Both a & b (d) None
9. In assembly language, symbols are used instead of binary code. These symbols are called
(a) human languages (b) mnemonics (c) Machine language (d) None
10. Memory is made up of:
(a) Set of wires (b) Set of circuits (c) Cells (d) None
11. The order of stack is
(a) FIFO (b) LIFO (c) GIGO (d) FIGO
12. A bus that moves data between the central processor and memory is known as

(a) I/O bus (b) CPU bus (c) Processor bus (d) Data bus
13. A translator is best described as
(a) Application software (b) System software (c) Hardware (d) None

Q No.2: Short questions. (12×2=24)

i. Why RAM or Main memory is called Volatile Memory.
ii. Differentiate between SRAM and DRAM.
iii. What do you know about BUS Interconnection
iv. Describe some activities of Control Unit.
v. Define oprating system with 2 examples.
vi. What does ALU do in computer Architecture?
vii. Differentiate between source code and object code.
viii. Differentiate between High level language and low level language .
ix. Differentiate between compiler and interpreter .
x. Differentiate between System bus and Expansion buses.
xi. Differentiate between serial and parallel ports.
xii. Describe cache memory .
Q No.3: Long Questions. (8×2=8)
1. Define guided and Unguided media and its types.
 ASPIRE GROUP OF COLLEGES
HAVELI LAKHA CAMPUS
Name: _______________________ Chapter # 5 (T-4) Date:
Roll No: ______________________ Fate Test # 04 Total Marks: 45
Subject: Computer Section: FA (I.T) Total Time: 90 min

Q No.1: Tick the multiple choice with the correct option. (13×1=13)
1. Which one is faster?
(a) RAM (b) cache (c) register (d) hard disk
2. Checking a computer program for errors is called
(a) Correcting (b) Bugging (c) Running (d) Debugging
3. The important characteristic of RAM is
(a) Volatile (b) Writes only (c) Reads only (d) Nonvolatile
4. Which is not a type of memory
(a) SRAM (b) DRAM (c) FRAM (d) ROM
5. CPU includes all of the following components Except
(a) Primary storage (b) ALU (c) Control unit (d) Register
6. Expansion cards are inserted into
(a) Processor (b) Peripheral devices (c) Slots (d) ALU
7. The extension of an executable file is
(a) Xls (b) doc (c) ext (d) exe
8. is a storage device
(a) CPU (b) CPU (c) Floppy disc (d) Bus
9. The cells of memory are logically organized into group of
(a) 8 bits (b) 5 bits (c) 7 bits (d) 6 bits
10. The output of compiler is catted:
(a) Source code (b) Object code (c) Source program (d) None of these
11. Temporary storage area within CPU is called
(a) Register (b) ROM (c) RAM (d) None of these
12. Usually RAM has types
(a) 2 (b) 3 (c) 4 (d) 5
13. A set of electrical paths used to transfer data is called:
(a) Printer (b) Keyboard (c) Monitor (d) Bus
14. Brain of computer that executes a set of instructions is called
(a) Bus (b) CPU (c) Monitor (d) Register
15. Which of the following is NOT a type of bus
(a) System bus (b) Data bus (c) Address bus (d) Time bus
16. Which Bus allows the processor to communicate with peripheral device
(a) System Bus (b) Expansion Bus (c) Data Bus (d) Control Bus
17. The program that contains the instructions to operate a device is called:
(a) device driver (b) device operator (c) device system (d) Device OS
18. Which components is used to connect different parts of the computer together
(a) AU (b) buses (c) CU (d) I/O Unit
19. A characteristic of ROM is that it is
(a) Volatile (b) read only (c) write only (d) read and write
20. Which one of is slower
(a) RAM (b) Hard disk (c) Register (d) Cache
21 The address bus is
(a) Bidirectional (b) Multidirectional (c) Unidirectional (d) Circular
 Subjective
Q No.2: Short questions. (12×2=24)
xiii. Why RAM or Main memory is called Volatile Memory.
xiv. Differentiate between SRAM and DRAM.
xv. What do you know about BUS Interconnection
xvi. Describe some activities of Control Unit.
xvii. Define oprating system with 2 examples.
xviii. What does ALU do in computer Architecture?
xix. Differentiate between source code and object code.
xx. Differentiate between High level language and low level language .
xxi. Differentiate between compiler and interpreter .
xxii. Differentiate between System bus and Expansion buses.
xxiii. Differentiate between serial and parallel ports.
xxiv. Describe cache memory .