CHAMELEON 3

FLIR
P/N: CM3-U3-13S2, USB3 VISION
®

FLEXIBLE FORM FACTOR + USB3 VISION

The Chameleon3 camera line combines the ease-of-use of USB 3.0, the small
size and flexibility of board-level, and the most popular CCD and CMOS image
sensors into an affordable package. Available in a compact 44 x 35 x 19.5 mm
case or as a 40 x 31 mm board stack. The lightweight metal case is designed for
reliability and offers multiple mounting points and a locking USB 3.0 connection.
Includes on-camera frame buffer for image retransmission, opto-isolated GPIO
with locking connection, and a hassle-free 3-year warranty.

KEY FEATURES
• Boxed and board level available
• On-camera image processing: color interpolation, gamma, and LUT
• 16 MByte frame buffer; LED status indicator

Board Level With Case

www.flir.com/mv
Specifications
CM3-U3-13S2 Specifications
CM3-U3-13S2M CM3-U3-13S2C
Firmware 1.1.3.0 1.1.3.0
Resolution 1288 x 964 1288 x 964
Frame Rate 30 FPS 30 FPS
Megapixels 1.3 MP 1.3 MP
Chroma Mono Color
Sensor Sony ICX445, CCD, 1/3" Sony ICX445, CCD, 1/3"
Readout Method Global shutter Global shutter
Pixel Size 3.75 µm 3.75 µm
Lens Mount CS-mount CS-mount
ADC 12-bit 12-bit
Gain Range -11 dB to 23.991 dB -11 dB to 23.991 dB
Exposure Range 0.046 ms to 31.9 seconds 0.046 ms to 31.9 seconds
Trigger Modes Standard, bulb, low smear, overlapped, multi-shot Standard, bulb, low smear, overlapped, multi-shot
Partial Image Modes Pixel binning, ROI Pixel binning, ROI
Image Processing Gamma, lookup table, and sharpness Gamma, lookup table, hue, saturation, and sharpness
HDR Sequencing 4 x exposure, 4 x gain (Firmware: 1.10.3.0) 4 x exposure, 4 x gain (Firmware: 1.10.3.0)
Image Buffer 16 MB 16 MB
User Sets 2 memory channels for custom camera settings 2 memory channels for custom camera settings
Flash Memory 1 MB non-volatile memory 1 MB non-volatile memory
Opto-isolated I/O Ports 1 input, 1 output 1 input, 1 output
Non-isolated I/O 2 bi-directional 2 bi-directional
Auxiliary Output 3.3 V, 150 mA maximum 3.3 V, 150 mA maximum
Interface USB 3.0 USB 3.0
Power Requirements 5 - 24 V via GPIO or 5 V via USB 3.0 interface 5 - 24 V via GPIO or 5 V via USB 3.0 interface
Power Consumption <3 W maximum <3 W maximum
44 mm x 35 mm x 19.5 mm (case enclosed); 40 mm x 31 mm (board 44 mm x 35 mm x 19.5 mm (case enclosed); 40 mm x 31 mm (board
Dimensions/Mass
level) /54.9 g (cased) / 27.9 g (board level) level) /54.9 g (cased) / 27.9 g (board level)
Machine Vision Standard USB3 Vision v1.0 USB3 Vision v1.0
Compliance CE, FCC, KCC, RoHS. The ECCN for this product is: EAR099. CE, FCC, KCC, RoHS. The ECCN for this product is: EAR099.
Operating: 0° to 45°C Operating: 0° to 45°C
Temperature
Storage: -30° to 60°C Storage: -30° to 60°C
Operating: 20% to 80% (no condensation) Operating: 20% to 80% (no condensation)
Humidity
Storage: 20% to 95% (no condensation) Storage: 20% to 95% (no condensation)
Warranty 3 years 3 years

FLIR Integrated Imaging Solutions

CANADA EUROPE
12051 Riverside Way T: +49 7141 488817-0
Richmond, BC, Canada F: +49 7141 488817-99
V6W 1K7 E: [email protected]
T: +1 866.765.0827 (toll free)
T: +1 604.242.9937 CHINA
F: +1 604.242.9938 For a full list of international distributors and offices visit www.flir.com/contact-us
T: +86 10 8215 9938
E: [email protected] F: +86 10 8215 9936
www.flir.com/iis E: [email protected]

USA ASIA
T: +1 866.765.0827 (toll free) E: [email protected]
©2017 FLIR® Integrated Imaging Solutions Inc. All rights reserved. Names and marks appearing on the products herein are either registered
E: [email protected]
trademarks or trademarks of FLIR® Systems, Inc. and/or its subsidiaries.

www.flir.com/mv