GUIDE BOOK Version: 001

Date: 04 16 2018

Date: June 18, 2018 Brand: Infinix Number: I001

Subject: Guide Book X620B
Models: ZERO 6 - X620B SW version: X620B-Q6361A-O-180614V04

INDEX

Driver installation process ....................................................................................... 2

Backup and Restore NV parameters ....................................................................... 8
Write IMEI process .................................................................................................. 11

Produced by: Juan Guillermo Ortega Verdecia Position: Software Quality Supervisor

This document is confidential for internal use of Software Test in CARLCARE SERVICE S.A.S
 GUIDE BOOK Version: 001
Date: 04 16 2018

Driver installation process

1. We need to use the zero6_infinix_pc_driver_v1.0 folder, where you will find the
driver installer:

2. Continue with the process:

Produced by: Juan Guillermo Ortega Verdecia Position: Software Quality Supervisor

This document is confidential for internal use of Software Test in CARLCARE SERVICE S.A.S
 GUIDE BOOK Version: 001
Date: 04 16 2018

3. Select to first option and press next button:

Produced by: Juan Guillermo Ortega Verdecia Position: Software Quality Supervisor

This document is confidential for internal use of Software Test in CARLCARE SERVICE S.A.S
 GUIDE BOOK Version: 001
Date: 04 16 2018

4. Accept the QUALCOMM Software License next button ann start the
installation:

Produced by: Juan Guillermo Ortega Verdecia Position: Software Quality Supervisor

This document is confidential for internal use of Software Test in CARLCARE SERVICE S.A.S
 GUIDE BOOK Version: 001
Date: 04 16 2018

Produced by: Juan Guillermo Ortega Verdecia Position: Software Quality Supervisor

This document is confidential for internal use of Software Test in CARLCARE SERVICE S.A.S
 GUIDE BOOK Version: 001
Date: 04 16 2018

5. During the process the program will request some authorizations about the
security software and trust in the driver controllers, here is very important to
check on always trust:

Produced by: Juan Guillermo Ortega Verdecia Position: Software Quality Supervisor

This document is confidential for internal use of Software Test in CARLCARE SERVICE S.A.S
 GUIDE BOOK Version: 001
Date: 04 16 2018

6. When you connect the phone, it starts to install the drivers automatically and
check the final results:

Produced by: Juan Guillermo Ortega Verdecia Position: Software Quality Supervisor

This document is confidential for internal use of Software Test in CARLCARE SERVICE S.A.S
 GUIDE BOOK Version: 001
Date: 04 16 2018

Backup and Restore NV parameters

For this process we need to use the QFIL Tool to do the backup and restore NV
parameters. You will find the tool on QSPT program:

1. Open the tool and set:

Produced by: Juan Guillermo Ortega Verdecia Position: Software Quality Supervisor

This document is confidential for internal use of Software Test in CARLCARE SERVICE S.A.S
 GUIDE BOOK Version: 001
Date: 04 16 2018

2. Before of the process, it is very to open the diagnostic port on the phone with
the code: *#*#270791#*#* :

When you connect the phone while is on status in the computer, the program
will show the Qualcomm port com:

Produced by: Juan Guillermo Ortega Verdecia Position: Software Quality Supervisor

This document is confidential for internal use of Software Test in CARLCARE SERVICE S.A.S
 GUIDE BOOK Version: 001
Date: 04 16 2018

3. Go to tools and select the QCN Backup Restore:

You can see this windows and write the location where the parameters will be save.
In this Case the location was: D:\X620_parameters.qcn, you can choose any name
for your parameters and location too. After that we select the Backup QCN button:

For Restore process is the same, you can select the parameters file and then select
the Restore QCN button.

Produced by: Juan Guillermo Ortega Verdecia Position: Software Quality Supervisor

This document is confidential for internal use of Software Test in CARLCARE SERVICE S.A.S
 GUIDE BOOK Version: 001
Date: 04 16 2018

Write IMEI process

For Write IMEI Process, it is very important to check the com port number on device
manager in the computer in order to set the IMEI tool, in this case we have our port in
COM19:

Note: diagnostic port on the phone “Open”: *#270791#*#*

Produced by: Juan Guillermo Ortega Verdecia Position: Software Quality Supervisor

This document is confidential for internal use of Software Test in CARLCARE SERVICE S.A.S
 GUIDE BOOK Version: 001
Date: 04 16 2018

1. The IMEI tool is: Qualcomm_Smartphone_Write_IMEI:

 We need to set the tool, select the setting button and put the password: ustest

 Deselect this option and ok to continue

Produced by: Juan Guillermo Ortega Verdecia Position: Software Quality Supervisor

This document is confidential for internal use of Software Test in CARLCARE SERVICE S.A.S
 GUIDE BOOK Version: 001
Date: 04 16 2018

2. Select the com port number and write the IMEI 1 and IMEI 2

3. Now select the Write 1 Button and connect the phone with the diagnostic port
open:

Produced by: Juan Guillermo Ortega Verdecia Position: Software Quality Supervisor

This document is confidential for internal use of Software Test in CARLCARE SERVICE S.A.S
 GUIDE BOOK Version: 001
Date: 04 16 2018

Thank you

Produced by: Juan Guillermo Ortega Verdecia Position: Software Quality Supervisor

This document is confidential for internal use of Software Test in CARLCARE SERVICE S.A.S