0% found this document useful (0 votes)
40 views8 pages

ACN Individual Assignment For Communication Eng'g Students

The document outlines an individual assignment for an advanced computer networks course. It provides instructions for students to design a VLSM addressing scheme for a topology, configure routers with IP addresses, passwords, banners, dynamic address assignment, routing protocols, and backup a router configuration.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
40 views8 pages

ACN Individual Assignment For Communication Eng'g Students

The document outlines an individual assignment for an advanced computer networks course. It provides instructions for students to design a VLSM addressing scheme for a topology, configure routers with IP addresses, passwords, banners, dynamic address assignment, routing protocols, and backup a router configuration.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

Individual Assignment of Advanced Computer Networks (20%)

According to your VLSM addressing of the network in the question number given for you, do the following

1. Configure all routers IP addressing in accordance your VLSM addressing scheme.


2. Configure console password “ECE” and enable Password “RAYA” on all the routers as well as Make sure that passwords must not appear in
running configuration in clear text.
3. Configure the banner for console log in and remote log in on all the routers. The banner must be $WARNING ACCESS RESTRICTED$
4. Configure the routers in order to assign dynamic IP addresses of the end devices/ PCs connected to each LAN. Assign IP address on the end
devices by adding Two PCs on each LAN.
5. Use one Admin PC connected to one of the LANs must be able to telnet all the routers. Now, configure telnet on all the routers in such A way
that only admin PC is able to telnet the routers. For remote log in use the password “ECE” on all the routers.
6. Save the configuration you did so far and configure the routers using
a) Static Routing b) EIGRP c) OSPF
7. Backup one of your router’s configurations on a TFTP server.

Page 1
Individual Assignment of Advanced Computer Networks (20%)

Student Name: Adugna Birhanu

Your organization told you to use the network 195.109.74.0/24 for the network below. Design an appropriate VLSM addressing scheme for the
topology. Maximize the number of host addresses at each level of subnetting

Page 2
Individual Assignment of Advanced Computer Networks (20%)

Student Name: Gebremedhin Kelali

Your organization told you to use the network 200.124.67.0/24 for the network below. Design an appropriate VLSM addressing scheme for the
topology. Maximize the number of host addresses at each level of subnetting

Page 3
Individual Assignment of Advanced Computer Networks (20%)

Student Name: Gebretsadik Weldemhret

Your organization told you to use the network 172.16.8.0/22 for the network below. Design an appropriate VLSM addressing scheme for the
topology. Maximize the number of host addresses at each level of subnetting

Page 4
Individual Assignment of Advanced Computer Networks (20%)

Student Name: Haben Tewelde

Your organization told you to use the network 160.59.128.0/19 for the network below. Design an appropriate VLSM addressing scheme for the
topology. Maximize the number of host addresses at each level of subnetting

Page 5
Individual Assignment of Advanced Computer Networks (20%)
Student Name: Maereg Kahsay

Your organization told you to use the network 190.12.40.0/23 for the network below. Design an appropriate VLSM addressing scheme for the
topology. Maximize the number of host addresses at each level of subnetting

Page 6
Individual Assignment of Advanced Computer Networks (20%)
Student Name: Mehari Kehasi
Your organization told you to use the network 134.14.8.0/22 for the network below. Design an appropriate VLSM addressing scheme for the
topology. Maximize the number of host addresses at each level of subnetting

Page 7
Individual Assignment of Advanced Computer Networks (20%)
Student Name: Yohannis Haftu

Your organization told you to use the network 64.64.20.0/22 for the network below. Design an appropriate VLSM addressing scheme for the
topology. Maximize the number of host addresses at each level of subnetting

Page 8

You might also like