Scribd
Upload
67 views4 pages

CM9730 English 1 - Cover - Indd

The document provides a troubleshooting guide for electrical issues with sections on troubleshooting a power supply on an SMPS board, issues with no 12V or -5V output, and issues with no amplifier gate line output or amplifier output. It includes steps to check fuses, diodes, resistors, signals and supply voltages at various component pins.

Uploaded by

atendimentopaulosom
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
67 views4 pages

CM9730 English 1 - Cover - Indd

The document provides a troubleshooting guide for electrical issues with sections on troubleshooting a power supply on an SMPS board, issues with no 12V or -5V output, and issues with no amplifier gate line output or amplifier output. It includes steps to check fuses, diodes, resistors, signals and supply voltages at various component pins.

Uploaded by

atendimentopaulosom
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

ELECTRICAL TROUBLESHOOTING GUIDE

1. POWER SUPPLY ON SMPS BOARD

No output 5.6 VA

NO
F901 normal? Replace F901 (same fuse).

YES

NO
BD901 normal? Replace BD901.

YES

Is the VCC NO
(11 V ~ 25 V) supplied to IC901 D960, D961 normal?
Pin4?

YES

Power line of MAIN PCB is short. Check or replace D960, D961.

No 12 V

Is the NO
VCC 13 VA supplied to IC951 Check or replace D962, D963.
Pin1?

YES

Is there NO
‘H’ signal at IC951 Check P_CTL from μ-com.
Pin4?

YES

Check or replace IC951.


Or check line of MAIN PCB is short or not.

3-26
ELECTRICAL TROUBLESHOOTING GUIDE

No -5 V

Is the NO NO
VCC -7 VA supplied to IC953 R965 normal? Check or replace R965, D959.
Pin2?

YES YES

Check or replace Q951.

Is there NO
‘H’ signal at Q953 Check P_CTL from μ-com.
Base?

YES

Check or replace Q953, Q957.


Or check line of MAIN PCB is short or not.

No output VFD

NO
R968 normal? Replace R968.

YES

NO
D959, D957 normal? Replace D959, D957.

YES

NO
ZD951, ZD952 normal? Replace ZD951, ZD952.

YES

Check line of FRONT PCB is short or not.

3-27
ELECTRICAL TROUBLESHOOTING GUIDE

No output AMP gate line

Is the VCC NO NO
13 VA supplied to IC952 R952 normal? Check or replace R952.
Pin1, 3?

YES YES

Check and replace IC952.


Or check line of MAIN PCB is short or not.
Check or replace D951, D952.

3-28
ELECTRICAL TROUBLESHOOTING GUIDE

No AMP output

Is the NO NO
C904, C905 voltage PFC P.CTL OK? Check PFC P.CTL from μ-com.
about 380 V?

YES YES

Is the NO
VCC 12V supplied to Replace D908, Q955, PC903.
IC904 Pin16?

YES

Check or replace
IC904, Q907 ~ Q910.

YES AMP P.CTL NO


F911 normal? OK? Check AMP P.CTL from μ-com.

NO YES

Is the NO
Replace F911. VCC 12V supplied to Replace D908, Q956, PC902.
IC902 Pin8?

NO
YES
Q911 ~ Q914 OK?

NO

Check or replace IC902 and


Check or replace D953 ~ D956.
Replace Q911 ~ Q914. Check Q911 ~ Q914 gate(Pin2)
Check line of MAIN PCB is short or not.
Components (Resistors, Diodes).

3-29

You might also like